Boot Manager Windows keeps popping up

Similar Questions

• Boot Manager Windows keeps giving me an error, and I can not boot vista now. : O

  Hey guys, I have more solutions for the time and thought that I have turned to a group instead of address on mine.

  When the problem started?

  This morning, so a few hours there.

  What have you tried to fix it?

  Restore Vista CD

  What is the error message (all)?

  Says, the file: \Windows\System32\Drivers\oduzt.sys
  Situation: 0xc0000225
  Info: Windows could not load a critical system driver is missing or corrupt

  I've never heard of this file...

  What was the last thing you did before the problem started?

  Tried to delete/remove virus and malware
  Malwarebytes
  used, Microsoft's malicious remover<-- from="" microsoft="">
  the Microsoft file was the last thing I used before that happened.
  literally on reboot has happened.

  What are your system specs?
  Vista sp1 home
  Laptop Gateway
  Guessing 32bits
  Model no: MA7
  Model mt6840
  I'll tell you more if I could pull up? I can access the recovery cd cmd there at - it a command that will show?

  Do you have a screenshot?
  a little... haha taken with a camera...

  

  Also I was wondering... is there a way I can run a partition to say windows XP and take all the files off your computer and save them.

  then if it comes down to it, I can just empty the computer and install vista?

  Start your system and start typing the first F8 options should be repair you computer, select it, press on enter. Press the OK button on the next screen. It will ask for a user name and password, type you're windows journal on credentials and after that click ok. No system recovery tools in quick order.

  Type cd c:\windows\system32\drivers command and her then press ENTER after typing the command del oduzt.sys
  and press ENTER. After that, restart the system

  If you do not repair you computer after F8 try to boot from the disk and under the install now screen you can click on the repair, you're computer and there steps are the same. Let me know what happens...

• a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  a window keeps popping up that says: Windows host process (Rundll32) has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available

  Check if you have picked up malware in your travels.

  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  Check in safe mode.

  Vista advanced boot options
  http://Techblissonline.com/Vista-advanced-boot-options/

  See if you can isolate a possible cause.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• a window keeps popping up saying that someone else has my IP address.

  a window keeps popping up saying that someone else has my IP address. What should I do?

  Hello

  If you still experience this problem click on the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/how-to-change-dynamic-IP-address-in-Windows-7-or/9775a835-fb49-469B-87C3-e2c7354e0ad7

  b Eddie

• have a small window keeps popping up, it is called "document flip".

  have a small window keeps popping up, it is called "document flip" it is boring and I can't find out how to remove or disable any help or info would be appriecated

  You have a Logitech mouse? A quick Google indicates that "document flip" can be a feature of the mouse. If this is applicable, look in your control panel applet mouse to disable document Flip option. MS - MVP - Elephant Boy computers - don't panic!

• Help and Support Windows keeps popping up.

  Windows Vista Help and Support Windows keeps popping up. I've got One Care antivirus and I do not know what is the cause of the problem. I restarted my laptop, it disable it in the options available in the settings of help and support, but no results. It's always the same. Help, please

  Updated answer:

  Try this:

  The reason may be spyware or adware or... If it is unexpected, if not, there is a problem with a Microsoft program.

  So try scan your pc using:

  http://www.Malwarebytes.org/ very good Anti malware

  http://www.SUPERAntiSpyware.com/ very good Anti Spyware (for scanning)

  http://www.Safer-Networking.org/en/SpybotSD/index.html (for scanning)

  Hitman Pro! http://www.SurfRight.nl/en

  use for protection:

  http://www.JavaCoolSoftware.com/SpywareBlaster.html (very good for protection)

  Try using another antivirus that could do! Not sure! Avast (recommended)
  or scan online like Trend Micro, we're pretty good!

  I hope this helps!

  Please also visit my blog here http://safeworldwidewebsurfing.blogspot.co.uk/

• Boot Manager Windows fails error 0xc000041c

  original title: laptop CRASH

  I HAVE A LAPTOP TOSHIBA SATELLITE THAT BROKE DOWN.  BOOT MANAGER WINDOWS fails to START, WITH AN ERROR CODE OF Oxc000014c, a FILE of the REGISTRY SYSTEM IS MISSING OR DAMAGED.  IS THERE A POSSIBLE SOLUTION.  I DON'T HAVE MY WINDOWS INSTALLATION DISC.

  Hello

  Try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• Dial to the top of the login window keeps popping up

  When you are working offline (on the documents, for example), the dial to the high connection window keeps popping up.  It can occur several times per minute.  Usually, it appears in a set of three (I have to close 3 identical windows before I can return to my job to document).  Sometimes, he appears constantly, as a situation of infinite loop.  This problem started a few weeks maybe caused by a Windows Update?  How can I make this stop and only bring up this window when I ask you?

  Its a long time since I used the dial upwards, but I seem to remember if its game to "never establish connection", then if you launch your browser or your email etc program, you weren't invited to dial the internet. I think that you will need to manually connect first.

• A window keeps popping up

  A window keeps popping up on my phone that says "C:/Users/AppData/local/ARCADE~1/AgHelp.dll the specified module could not be found. What is - this and why it reappear?

  Hi Sonia,.

  Please contact Microsoft Community.

  This problem can occur if your computer is infected by virus or adware. I suggest to read the article below and check if problem still persists.

  Using Windows Defender.

  http://Windows.Microsoft.com/en-us/Windows/using-Defender#1TC=Windows-8

  Note: click "Full analysis" in "Windows Defender".

  Meet us, then we can help you further.

• I ran the Windows memory diagnostic tool, he keeps repeating and will not be finished, finally Boot Manager Windows appears with the error code: 0xc000000d.

  I ran the windows memory diagnostic tool on my PC toshiba laptop equium, it restarts priming for display and then directly into the RAM test...
  Unfortunately, it will not end and keeps repeating and finally if leave to work for a few hours the Windows Boot Manager comes in and stops the RAM test while noting an error 0xc000000d code. I REALLY can't reformat what I have given crucial for the thesis of the University and I only have the Vista installation disc not repair...
  This RAM test shows whenever I start the PC, how can I forget that he spent his RAM test a pc and more? I'm so confused!

  Any ideas on how may get a repair disk or fix it otherwise? Thank you very much

  Run Memtest86 +: your computer passes this test?

  Memtest86 + is running from a floppy or CD and should eliminate or confirm if your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  J W Stuart: http://www.pagestart.com

• Cannot get rid of Symantec Anti-virus. - a windows installer window keeps popping up referring to Symantec after uninstalling symantec.

  I have problems wiping out anti-virus from Symantec. I deleted everything that I could find has nothing to do with it, so I thought, but a windows window installation keeps popping up referring to Symantec, prompts me to insert my disc (which I don't have) and then displays an error. It does this randomly. I installed something else and he said everything is ok. Is my problem in the temporary files or I'm not pushing the right buttons?

  Tried Norton Removal Tool?

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

  You're more likely to get the best advice if you include:

  • the exact application you are trying to uninstall, including version
  • the version of Windows you have, including the service pack
  • the full text of the error messages you see, without paraphrasing
  • what you have done so far, in addition to details "I deleted everything I could find.

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• Boot Manager Windows problem asit always starts with a selective startup under the Startup tab

  Whenever I start my laptop I get Windows boot manager options in which it highlights the option of windows 7 and I have to press Enter and continue with this option selected.

  I tried to change my boot options in msconfig, but once again the configuration back to selective Starup of Normal startup. Also I disabled some startup applications, but even changes are not get saved when I restart the system after changes. My touchpad no longer works between the two, and then it starts to work. My left and right keyboard arrows keys do not work.

  My change in normal startup is get back on selective startup.

  Please help me to solve these issues.

  Hello

  It is very possible that this is for the reason that you have corrupted files on your system. System File Checker will scan your system for the missing, corrupt or damaged files. In addition, it will try to correct them. If you have changed the important system files, System File Checker will be - make sure you make backups of them!

  How to run the System File Checker

  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  I would also recommend that you run the Startup Repair to the problems that Windows may be displayed when you start your computer.

  How to run the Startup Repair tool

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/Startup-Repair

  Thank you

  Legaede

• Windows Boot Manager - windows does not have charge as the HAL is missing

  What does that mean? What should I do to fix? I have no windows installation cd that I bought the laptop with all the software on it - it was a demo in Comet

  Hello

  I guess the \System32\Hal.dll is missing.
  This means that your windows operating system must be reinstalled.

  I put t know what laptop you have, but I think that the Toshiba Recovery Disk Creator was preinstalled on your laptop. This software creates recovery Toshiba DVD, that help you to reinstall the operating system. But now he s at the end you can not boot into the operating system.

  You can try this:
  Press F8, choose repair my computer, then select Toshiba HDD Recovery.
  Maybe this option is available.

  Otherwise will need you a Windows installation disc

• Boot Manager Windows couldn't start?

  I have an advent netbook that is not a hard drive. my laptop suddenly stops while I use it and when I turn it on it says that you cannot start Windows. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer. (I CAN'T DO THIS BECAUSE I HAVE NO DISC DRIVE IN MY NETBOOK)
  2. choose your language settings, and then click "next".
  3. click on repair your computer.
  File: \Boot\BCD
  Status: 0xc000014c
  Info: An error occurred trying to read the boot configuration data.
  I'm not a very experienced user and I don't have any idea what to do!
  any help? THIS IS URGENT.

  Hi Emma,

  ·         You have Windows XP or Windows Vista/7?

  Check to see if the following is useful.

  Method 1: Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration - Windows Vista/7

  How to start your computer by using last good known Windows XP Configuration

  Method 2: Note: Check if you have the repair your computer option in the advanced boot menu.

  If you do, perform a startup repair, check to see if it helps. (For Windows Vista/7 only)

  Startup Repair: frequently asked questions - Windows 7

  Startup Repair: frequently asked questions - Windows Vista

  Respond with more information so we can help you best.