Bootcamp partition, disappeared after trying to install windows 10

Hello world.

I tried to create a bootcamp on my MacBook (13 '' MacBook Pro 128 GB early 2015) and the computer restarted then that partition the drive. The 32 GB, I put in the training camp are now "deleted" from the drive, and I can't find them.

Please after the release of the next command in OSX Terminal.

Cs diskutil list

Tags: Windows Software

Similar Questions

  • STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

    Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

    STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

    Hello

    See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

  • HP Pavilion ze4900: blue screen of death after trying to install Windows on Pavilion ze4900?

    After the death of my hard drive in my Pavilion ze4900, I replaced it with another hard drive for laptop, I had laying around.

    I also tried to install Windows XP Home from a Windows installation CD, the same OS, the laptop had before the hard drive died.

    Everything is going well until the laptop has been made all the installation files, instead of giving me the opportunity to install Windows or repair Windows, the laptop will eventually show me a blue screen with the message:

    "A problem has been detected and windows has shut down to prevent damage to your computer.

    What can I do to fix this? I installed Windows XP on another computer using the same CD, so the CD disappeared not corrupted and replacing the hard drive is hardly used.

    Any help would be greatly appreciated!

    @zenvo2015,

    Hello and thanks for the display on the HP support forums.  The first thing you want to check is if there are any problems with the hard drive that you put in.  Run BIOS diagnostics for the drive and the equipment to make sure that there is no problem.

    Laptops HP - diagnostic system (F2)

    And.

    HP Notebook PC - test a hard drive from BIOS

    Please let me know how things are going.

    Thanks again for posting and have a great day.

  • my computer went non responsive after trying to install windows 7

    My office while trying to install windows 7 has stpped answer after 1 hour, still nothing 1 hour later, approximateley ideas?

    Start by unplugging devices external, discs additional (just leave the reader who connected Windows installed. For laptops to ensure that you are connected to an electrical outlet and not running off the battery voltage.

    J W Stuart: http://www.pagestart.com

  • Windows store disappeared after trying to download Windows 8.1

    My Windows store disappeared afater trying to download Windows 8.1! Then it is!  Since I have to go to download the free Windows 8.1 where do I find

    As I continued to try to download and install Windows 8.1 I finally received this message: "you're running a business or volume license of Windows 8 and cannot be updated using Windows Store.»  Contact your system administrator for more information on how you [date of your PC to the Windows 8.1

    I also had another message that he does not meet the minimum requirements and I really don't think that's true.  It is a fairly new Toshiba laptop running Windows 8 with 6 GB of memory and a 500 GB hard drive, which, as well as other info should accommodate 8.1.

    And I can't really the absence of Windows store, as I used it.

    Help, help, help!

    Hi Pauline,

    Thanks for posting your query on the Microsoft Community.

    I understand that you are facing problems trying to upgrade to 8.1 Windows in your system.

    To solve your problem better, kindly provide us with more details

    1. You use Windows 8 Enterprise version or Volume license key in your system?

    I suggest you follow the below methods of troubleshooting for Windows App Store in your system:

    Method 1: you can try to reset the application cache.

    1. Press the Windows key + R to open the run window.
    2. Type wsreset.exe.
    3. Press OK.

    Method 2:

    If the problem persists, run DISM.

    Corruption of Windows errors can prevent service packs and updates for Windows Installer. For example, an update can not install if a system file is damaged. The DISM tool / system update can help you to correct certain errors of corruption of Windows.

    Follow the steps in the link below to run TELLM:

    https://support.Microsoft.com/en-us/KB/947821

    Answer with the information needed to help you solve the problem. I'll be happy to help you.

    Thank you.

  • Bootcamp partition disappeared after fdisk commands

    Hello

    I have a serious problem caused by my own stupidity,

    I tried to resize my partition, bootcamp, with no success, of course.

    Here is what happened,

    I resized the MAC OS X partition and made a new 100 GB. Then I tried to restart Windows that did not work.

    A black screen appears not saying no device found Boot... Insert and press a key.

    I rebooted to mac OS X and searching the forums, I ended up find a thread of a few years.

    He said try a few commands to disc, I did, it didn't work. Then I have a little "creative / reckless" and tried between the two commands.

    I guess I deleted or seriously damaged my MBR, although it could be a TPG. I do not know.

    Now, I can't see my Bootcamp partition in the finder.

    I see the size of the partition in the disk utility application, if I look at the full hard disk partition scheme

    It's the score 'Naamloos' is where bootcamp has been stored and as you can see I can't access it or what so ever.

    However in the terminal, I can see the partition

    My question is, if I can restore this partition?

    And if not, I can see the data on that partition?

    A lot of work not saved is there and final exams are almost!

    I'm sorry for the post probably not correct 'according to the rules of the forums"and the faulty use of the language and the incorrect spelling.

    1. what version of Windows?

    2. What is the year/model of your MBP?

    3 Please after the release of

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

    sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  • After trying to install Windows updates, my computer turns off.

    I tried to load 2012 ARO.   In the end there was a request to restart my computer, so I left closed... it has been slain on the third phase of the judgment since then.  Support ARO said that it's a microsoft issue, not a question ARO.  I tried to restart in SafeMode known last... but who doesn't have a wok.  At out the battery, disconnected it, everything that I could think of and nothing works.  Help, please.

    original title: don't stop after update

    (1) never install two security systems on the same computer because of the possibility of conflicts like this.  Norton may have similar tools to what you were trying to install.

    During the validation of the subjects as that one, don't forget to post your operating system of Windows and the computer make and model.

    Recovery discs are here with your system?  Alternatively, did you create recovery discs?  Have you created a boot disk?

    (2) by changing the boot order, you can force your computer to boot from a CD/DVD drive, a floppy, or even out of the network drive.  Use the startup disk or recovery disk if you have one.

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    If the answer to the above is failed.

    (3) reboot and start typing the F11 key

    Y at - it a recovery screen?

    Follow the prompts

    Select fix my PC

    Description of the Windows XP Recovery Console for advanced users

    http://support.Microsoft.com/kb/314058

    If the answer is still no, you need to get the site of the manufacturer of the computer recovery discs. I think that you will be able to order Windows Vista or Windows 7 but Windows XP is rained on many sites and an internet search may be more useful in this case.

    How to get the installation discs for Windows XP for installation of boot floppies

    http://support.Microsoft.com/kb/310994

    Bing search engine

    http://www.bing.com/shopping/Microsoft-Windows-XP-Professional-with-Service-Pack-3-32-bit/p/7EC2D538C44375E9D976?q=sale%3A++Windows+XP+&lpq=sale%3A%20%20Windows%20XP%20&form=hure

    Recover Windows Vistsa operating system using HP Recovery - (relates as well to Windows XP)

    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00809678&product=18703

  • I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

    Device drivers for a Win 7 install on Ubuntu system

    Hello

    I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

    Thank you!

    The bios on fail safe defaults options are?

    It will probably take the raid driver

  • I can't create partitions in unallocated space when trying to install Windows.

    problem installing Windows

    I tried to install windows 7, then the hard drive selection window, it shows 2 spaces unallocated and I can't delete or create a new partition of them and niether I am able to install windows .please help

    Hello

    You can erase your entire hard drive with command prompt from booting from the Windows installation disc and run the utility "diskpart", clear full hard drive, make new partitions and install the operating system.

    (a) start the computer from the Windows installation disc.

    (b) click on 'Next' at the first prompt.

    (c) click on "Repair your computer."

    (d) click "next".

    (e) click on "Command prompt."

    (f) type "diskpart" without the quotes, and then press "Enter".

    (g) list disk 'type' without the quotes, and then press "enter".

    (h) type "select disk 0" without the quotes and replacing '0' by the actual number of the car you want to erase.

    (i) type "clean" without the quotes, and press "Enter." The drive is now completely erased.

    (j) restart the computer.

    (k) through the installation of Windows 7 with regular steps.

    I hope this helps.

  • Error: "could not create a new partition or locate a" when installing Windows via Boot Camp 10

    This error occurs on my 2012 15-inch MacBook Pro. I have 2 hard drives. One dedicated to OSX and one for Windows. This is my first install bootcamp. I let bootcamp create partitions, but to the partition/disk screen hard to choose, I get a message saying: "we could not create a new partition or locate a.. The partition has been formatted to NTFS. I tried later in this guide community post here: error: "we could not create a new partition or locate and existing" install Windows via Bootcamp 8.1, but no luck. I even tried to delete the partitions and create a partition empty for windows so it can create and format on its own and start using EFI. At this point, windows begins to install it and restart, but it fails during the part material recording and restarts. Then when it starts again I get a message that the installation has failed.

    Here's some output terminal which can help you to (I) hope.

    Blakes-MBP:~ blakeleeper$ diskutil list
    /dev/disk0 (internal, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage Macintosh HD            499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1 (internal, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *320.1 GB   disk1
       1:                        EFI EFI                     209.7 MB   disk1s1
       2:       Microsoft Basic Data                         319.9 GB   disk1s2
    /dev/disk2 (internal, virtual):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           +498.9 GB   disk2
                                     Logical Volume on disk0s2
                                     27D631AE-27C5-4E4B-98BC-92CE944ED60B
                                     Unlocked Encrypted
    /dev/disk3 (external, physical):
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     FDisk_partition_scheme                        *16.0 GB    disk3
       1:                 DOS_FAT_32 WININSTALL              16.0 GB    disk3s1
    Blakes-MBP:~ blakeleeper$
    

    You must disconnect the internal bus 500 GB SATA drive and use a flashdrive USB2 for OS X from startup. The 320 GB designated drive must be in the main Bay of the Mac. Once Windows is installed, reconnect your 500 GB drive in the Optibay (if you this road main Bay) will be Windows blue screen in most cases.

  • Problem with starting after trying to install XP.

    I have a Samsung NF110 netbook with an external cd drive. The hard drive has two partitions - c: and d:. C: installed Windows 7 and d: was empty. I wanted a machine to dual-boot with Windows 7 and XP in different partitions. I tried to install XP on the d: partition but during installation only choice was installed on the c: partition (replace Windows 7). I decided to do it and then I hope to install Windows 7 on the d: partition later. The installation process copied all files XP from the CD, but when it came to restart it has always tried to boot from the cd and start the implementation process. I tried to remove the cd drive, and then it came with NT invalid Boot.ini detect failed. I tried various suggestions found on forums to fix this. The most popular seems to be to get to the Recovery Console, and then type bootcfg/list and bootcfg /rebuild. When I do bootcfg/list it shows a Microsoft Windows XP Home Edition installed. However after the rest of the instructions for example enter the loading and do/fastdetect identifier does not solve the problem. Someone at - it any other suggestions to correct what I guess is an MBR corrupted. Wouldn't be better to just format the entire hard drive and start from scratch?

    Thanks in advance for any help offered.

    http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

    You must install the oldest OS first, so XP first then win 7. XP doesn't know how to run win 7, so if you install after win 7, you will lose the ability to boot under win 7. A repair of Windows 7 installation can fix.

    install xp and when you do, be sure to create 2 partitions, one for xp and one for win 7

    http://apcmag.com/how_to_dual_boot_windows_xp_and_windows_7_xp_installed_first.htm

  • no pilot of the aircraft were found when trying to install windows 7 on a new construction

    It is a new construction: card mother Asus M4A87TD/USB3, Phenom X 4 965 processor he's, with 1 64 GB Soild State drive which is where Windows 7 Pro must be installed, Raid 2 500 GB SATA hard drives that I use, total 8 GB memory Dual Channel DDR-1600 and an ATI Radeon HD5830 1024 GDDR5 video card.

    I am now trying to install windows and I get an error message saying that no device drivers found when you try to install windows 7 pro, so I tried to put in the disc that came with the motherboard because that's what I found during my research on this subject and it won't read the disc. I also learned that I should use a USB however, I don't have a large enough to copy documents from the disk device drivers.

    Any input would be appreciated because I was a machine now for a week only to find what I wanted and then in construction and now this problem - please help

    Suggest you only begin by installing a configuration non-RAID first. Also since this is a new construction, you need to do some test equipment to verify that you don't have a hardware problem. Connect a SATA drive to a standard SATA connector rather than the RAID connector.

    Set of utilities to test for computer HARDWARE manufacturers:

    Note: If you are OverClocking or use any automatic overclocking BIOS features, Intel EIST or Turbo Mode (turn off).
    then back at the speed of stock as a starting point.

    Disconnect the other internal hard drives and external USB devices.

    First try running Memtest86 +:  It runs from a floppy disk or CD, you must remove or
    confirm whether your one or more of your sticks of memory are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test - CD Bootable:
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD)
    and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD
    For Western Digital disks using WdDiag: http://support.wdc.com/product/download.asp?lang=en
    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    Once Windows is installed:

    Of device drivers: Have you installed latest device from the manufacturer of the motherboard drivers?
    Check their support site for the latest drivers as the CD that came with the motherboard may have
    older less stable drivers.

    Check the manufacture of graphics card download site: Download and install the latest drivers for Windows 7
    for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
    or equivalent ATI.

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 3 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    Note: For the overclockers using stock radiator and cooling fan Intel/AMD, you can expect a temperature range of
    35 to 40 ° C at idle and 60-65 c max when running Prime95.
    http://www.alcpu.com/CoreTemp/

    CPU ID (CPUZ): http://www.CPUID.com/cpuz.php
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    #1 Note:
    CPU - ID has two tabs (memory and SPD) that indicates the actual speed of the memory and 'SPD' tab displays the nominal speeds
    for each memory location is full.
    #2 Note:
    COMPARE the two values, the actual speed should not exceed the rated speed of your memory.

    CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
    voltages, temperatures, fans speed.
    http://www.CPUID.com/HWMonitor.php

    Test of Stress of FurMark GPU (graphics card):
    http://www.oZone3D.NET/benchmarks/fur/

    Pass marks burn in test: http://www.passmark.com/
    Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

    HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    http://www.almico.com/SpeedFan.php

    GPU - Z:
    A utility light, designed for you give information about your video card and GPU.
    http://www.techpowerup.com/GPUZ/

    PC WIZARD:
    A powerful utility designed especially for detection of hardware, also analyses more.
    He is able to identify a large scale of system components and supports the latest technologies
    and standards.
    http://www.CPUID.com/pcwizard.php

    Partition Wizard Home Edition:
    http://www.partitionwizard.com/free-partition-manager.html
    Note: There is also a CD bootable or versions of the bootable Flash drive:
    http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
    http://www.partitionwizard.com/bootable-Flash-drive.html
    Among the features and functions: create partition, Delete partition, format partition,.
    A partition resize, move partitions, Partition recovery after an accidental deletion,
    Convert the partition, partition Explore, Hide partition,
    Change the drive letter, a partition active Set, Explorer (content display) of the partition.
    Note: To complete any task use the "Pending Operations" box at the bottom left.

    Hiren BootCD
    http://www.Hiren.info/pages/Bootcd
    Hiren BootCD from USB (USB key)
    http://www.Hiren.info/pages/Bootcd-on-USB-disk
    (something more questions)

    UBCD4Win:
    http://www.UBCD4Win.com/index.htm
    UBCD4Win is a recovery CD bootable that contains software used for repairing,
    restoration or diagnose almost any computer problem.

    MyEventViewer - an easy way to display your event logs:
    http://www.NirSoft.NET/utils/my_event_viewer.html

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact, I was connected to internet

    Hi I'm trying to install windows 7 in my xp service pack 2... but I often get error code: 0 * 80070005... indicating that I was not connected to internet.but, in fact I was connected to internet... pls sumone help me solve this problem!

    Boot from the Windows 7 DVD
    Click Install now
    Accept the license agreement
    When the option is displayed to select a type of installation, click (Custom advanced)

    Select the disk partition where you want to install Windows 7 click Next.

    You will receive the following warning:

    The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

    (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

    The installation program will now begin installation. During installation, your computer will be restarted several times.

    Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

  • Tecra S11 BSOD after trying to install BIOS v3.1

    Tecra S11 BSOD after trying to install BIOS v3.1

    I have reinstalled all utility fingerprint successfully. After that I tried to install the new BIOS v3.1, but I got the BSOD
    Win 7 pro
    Where can I find the minidump to see what file that are the problem?

    C/windows/minidump folder is empty.

    Hello

    Do you get the BSOD during the BIOS update procedure?
    Are you using the Windows operating system preinstalled Toshiba? or did you install your own system?

    If you have installed your system, then you should check that the VAP is installed as well.

    Also, I found this info about the update to the BIOS:

    + Attention! +

    + Please close all applications before running the update. +

    + At the end of this process, the computer will be restarted in order to update the EC. +
    + While updating the CE, the screen will not appear and the power LED etc can blink. +
    + The computer may restart several times. There is no abnormal behavior. +
    + Please wait until the computer is restarted fully. +

  • HP 280 G1 (N9E78EA): Partition disappears after power failure, watch now unallocated

    Hello!
    I have a PC
    HP 280 i5 - 4590S G1 / 8 GB/500/DVD-RW/W10P + 7Pro64
    and
    Pro series SSD Plextor 128GB 2.5 "SATA SSD M6.

    Partition disappears after power failure, watch now unallocated.
    I tried to use TestDisk to see what was going on. After crossing the 'Analysis' command and deep research, but the partition disappears.
    Any suggestions on what I should do next?

    Your SSD have lost files due to the power failure system sudden. I suggest you run CHKDSK to fix this error. Also remember, if the data stored in your SSD are important to you, then first the software of raw data as WDR pro of stellar phoenix recovery and then apply diagnoses to repair.

Maybe you are looking for

  • Bug in connection Game Center

    I had a bug in connection with game Center. When I want to open the Center game, the soft gel and is the same ting in setting > general > game Center. I'm on ipad on ios 9.3.1 air. What can I do to clear this bug?

  • Re: Satellite C660D - 10 d - problems with updates of drivers

    Greetings from Greece We bought a toshiba Satellite C660D - 10 d. It came with windows7 64-bit.After the windows installation and updates of windows updates, that I entered toshiba for updating readers, some of them was not installed. Then, the inter

  • Ink HP new in a sealed box from eBay.

    I bought the HP ink new in sealed box from eBay. When I received it, I noticed that the box says writing tiny "only for sale in: Asia Pacific except China, the India and the Japan.» I him would have not purchased if it had been disclosed by the selle

  • HP 1020: hp 1020

    HP 1020 printer

  • Presario CQ56-115DX: turn on password reset

    My laptop asking an administrator or a power on password. I get the message key: 64439020 after 3 failed attempts. How can I reset/clear the password so I can't turn on my laptop?