(Bootcamp) Windows 10 becomes black and restarts on bootcamp
After installation of Windows 10 on bootcamp and navigation just normally as any other people would, after 10-15 minutes my screen suddenly goes black and restarts...
While it has been restarted, blue "windows" sautéed as usual and points to bicycle in a circle turns on for a few seconds and then it crashes, restarts again...
At this point I keep restarting and then it comes to auto repair, that I then used Safe Mode to get in which worked but I could not do much with it because she persisted again after the reboot.
Side note: I reinstalled windows bootcamp 10 a bunch of time trying to solve every single problem, why it worked... even searching it up on top of google... Still no hope...
Help, please!
Data sheet:
iMac (21.5 inch, at the end of 2013)
Intel Core i5 at 2.7 GHz
8 GB 1600 MHz DDR3
Macintosh HD
Intel Pro Iris 1536 MB
El Capitan 10.11.5 running (15F34)
Thank you
Please see 10 crashing Windows, but don't know why. The question is usually associated with Windows Installer an invalid Intel GPU driver.
Tags: Windows Software
Similar Questions
-
Windows Vista everything becomes black and has a static cursor in the upper left
Original title: I can't get my vista pc to boot at all.
I think I have a virus in my laptop, it is a toshiba satelite machine. All we can get it to do is see the toshiba start screen, listing the f2 and f12 options then just, the screen becomes black and has a static cursor in the upper left, it doesn't do anything else. I tried repeatedly tapping f8 to no effect can someone help me please?
Hi Andy,.
Remember to make changes before this problem?
Method 1: If your keyboard is equipped with F-lock (function button), switch, then check if you can access the advanced boot options to access Safe Mode or last good known Configuration. See the link below
http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode
Method 2: Follow the steps mentioned in the link below to access the system recovery tools and then try to run the Startup Repair tool and then system restore
How to access the System Recovery Options menu?Run the tool to restart system as shown in the link below
How to use Startup Repair?Method 3: You can also view the article below, which deals with a similar question
When you start a Windows Vista-based computer, the system may stop responding (hang) at a black screen
http://support.Microsoft.com/kb/946532
Important: In a clean installation, existing data will be deleted. These data include settings and personal data. After installing the operating system, you must also reinstall all programs.
-
Hi all
I have a virtual xp machine but the backround becomes black and and the internet comes up saying that I have to upgrade to windows 7. What to do.
It is activated
What should do
Danbot 1
Hi Danbot 1.
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads
Hope the helps of information.
-
Qosmio G30 - 126 monitor become black and FN buttons do not work
Hello
I have small problem, ehm two problems, but may be small for you :)
Last week, I install Vista ultimate WITHOUT RECOVERY CD...
It's OK, but I close the cover of the book and instantly open, monitor become black and I can't do anything without restarting.
In the Panel in feeding opportunities, bookmark 'options to close the cushion' does not work.Maybe it's by, because I'm not driver if exists
And second problem may be linked with the first, but it is a mistake, because I was not discover drivers because I haven't hidden toolbar on the back Windows, where standartly is on-site.
I don't work much hidden functions under the FN key (I think that FN + F2, F3...) F12) most keys be the side POWER without multimedia keys on the music...
Thx for the help!
SRY for my bad English
Post edited by: Martiosso
Hi Martin
First of all it s interesting if you have downloaded and installed all the Toshiba Vista drivers that are published on the European driver Toshiba page?
All drivers must be installed in the correct order!If I'm not mistaken the Qosmio G30 - 126 belongs to the series of PQG32E. It was delivered with HD DVD player, and therefore, you should choose the drivers for the Qosmio G30 HD DVD (PQG32E)!
Please first check the file txt Instructions of Installation, and then install all the drivers as mentioned in this document.
With regard to the issue of the display;
You need to install the correct driver NVIDIA of the Toshiba page!The keys FN and control buttons don t work because the Vista Toshiba value added Package has not been installed. This package contains applications that are needed to get all the features of Toshiba running!
Good luck
-
Windows-based games. When I maximize the window, it goes black and white
Hello
When I enlarge the window about all games windows; lonely spider for example, freecel, chess, hearts, then the game window becomes black and white and the game itself does not ocupy space full of the monitor, but has a black rectangle that extends from the right set. The game still works and works very well in color, if I the do not maximize.
Please can someone help?
Thank youWell, this isn't normal behavior. The first thing I would say is to update your graphics drivers, because that can help fix the problem.
-
When I use the quick selection tool, selected part becomes black and fuzzy.
Hi all
When I use the quick selection tool, the selected part becomes black and fuzzy. It is unusable as an image (see below). Do you know what setting is related to or how to fix it? Thanks in advance!
Hi breeves,
Please go into Photoshop preferences > performance > advanced settings > change the drawing to Basic mode > restart Photoshop and then check
Additionally, make sure that your graphics card drivers are updated.
If this does not help, give additional details, including the version of Photoshop, you use? What operating system?
-
Motorcycle G screen becomes black and white, the names of the app
Hello my motorcycle g screen becomes black and freezes, and also most of the time like every day my phone will be white all app names is there a way to get rid of this problem?
Maybe you met the problem described here. Using a different pitcher like Launcher Nova should help. The update which should improve as well.
See you soon,.
Nicole
-
When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.
Restart mail Windowas
When I try to delete anything out of my windows mail Inbox stops and restarts the imedietly.
Try to compact and repair the database (see www.oehelp.com/WMUtil/). There is likely an inconsistency between what is really there and what think the database is where and who must reconcile the two. So beware of interference from antivirus software which can cause these issues (see www.oehelp.com/OETips.aspx#3).
Steve
-
Windows Explorer Ramdomly stops and restarts.
Whenever I'm reviewing my files, be it on the C or D drive, windows Explorer randomly crashes and restarts, happened for a while now and I have no idea what causes it. However I noticed that happen when navigation control panel or searching for a file/location, for example, when I'm looking for a file to attach to an e-mail or by selecting a destination for the download of a file. It is really annoying because sometimes I have to move and copy files and Windows Explorer just throws me and I will once again to the location of the folder. I tried in safe mode, it happens again, but in fact it does not restart, it just closes and I have to open it again through Manager tasks, often crashing the Manager of the tasks, all in safe mode. I also tried the clean boot and continues to be, and sfc/scannow told me that corrupted files have been found but unable to fix, and I have no idea how to proceed.
(1) run chkdsk as follows:
A prompt by right clicking and select "Run as Administrator"
and then at the command prompt, type: chkdsk /f r, then press the Enter key.If you are asked to plan the volume to check the next time that the system/PC reboots,
Enter: yNow, restart the PC.
Keep an eye on the screen and watch to see if errors are reported.
If you know the manufacturing of your hard drive you can also download their diagnostic software.
Another use: SpeedFan has an online health analysis function
(SMART tab) for hard drives. It will show how your disks
compared with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php
Note: Unfortunately now includes a lot of bloat-ware, be very careful when installing remove bloat-ware.===============================================================
(2) run the command SFC /SCANNOW.
This will check and repair if necessary all of the critical Windows system files.
Click on start / all programs/accessories then
Right-click on the command prompt option and select "Run as Administrator".
(or "Safe Mode" open a command prompt)
At the command prompt, enter: SFC/scannowWindows 7 - order SCANNOW SFC - System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
http://support.Microsoft.com/kb/928228J W Stuart: http://www.pagestart.com
-
I've been using photoshop today all day and randomly it started just when I drag a color picture, it becomes black and white. Help!
Menu image > Mode > select an RGB color
-
in live mail: page w / emails becomes black. upper part is ok (host-files-display-accounts) rest becomes black. I can close the program, re open and may be authorized.
Hey Dano,
The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you
http://windowslivehelp.com/product.aspx?ProductID=15 -
WINDOWS APPLICATIONS 8 DOES NOT PROPERLY
- the black background become apps. for example, in app people white background become black
- the text becomes blurry and apps works slowly
- While only game apps work properly
- All these take place but live tiles work properly
After an update the drivers for my graphics card, I was disappointed to see that the problem was not resolved.
Then, a few days later I completely uninstalled the drivers for my graphics card and reinstalled them.
And here, my apps 'Modern' redisplay correctly.
-
Windows XP stop system will respond only to the hibernation or standby. Shut down and restart do not meet the demand. It has only happened since 01/01/2012. Why?
Hey IanForbesUH,
You said that you have received errors, please post what were these errors. This will help us figure where your system is having issues.have you tried restarting your computer in last known good Configuration? Make sure to save all your media because it restores your system to how it was on the selected dates.To do this: restart your computer. Immediately after the screen turns off for the first time, press the F8 key repeatedly. Selectlast known good Configuration and press ENTER. Windows XP attempts to start. -
When I load windows it runs only in black and white, I tried to start in safe mode with network and it runs in color, can you tell me how to solve this problem?
Go to the Web site of the manufacturer of your laptop computer-graphics/computer card > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
Why my pictures become black and white on my screensaver?
When my screensaver comes on, my personal photos appear. After about 5 minutes, they become black
and white, as they begin to color. Why is this happening?
Return to your screen saver options (by right-clicking on the desktop and choose personalize, then the screensaver below right.) Once there, click on the settings button. See if your screen saver has an option 'theme '. One of them is probably 'Black and White', and you have probably chosen the random theme, which means the black and white theme will appear later every few minutes.
Maybe you are looking for
-
with Firefox 29 closing tabs got more complicated
With the new design of 29 FF tabs do not show the close button (X) more when they are too many of them open. This makes tabs closure much more complicated than in the past. Now, I have to go to the first tab to see the button close or use the context
-
The question preceding pretty well explains the issue. The entire page just does not load, no matter how long wait. He seems to cling to the csi.gstatic.com
-
Dell Dimension 2400 will not meet the key USB WIFI Netgear
Dell Dimension 2400 Windows XP. Trying to get my old Dell back in action, but I ran into a problem. NO INTERNET. I have the WIFI in my house but I can't connect wirelessly with the desktop computer. I have a NetGear Wireless - N Dual Band, but dell W
-
Installed a new HARD drive, lost the OS disk, what now?
My son's hard drive crashed and can't find the backup OS for a new hard disk drive. How can I get the operating system for its Aspire M3470G, Win 7 64-bit? Am I stuck buying new? Arrgggh, sucks, losing backups.
-
HP Officejet Pro 8600 Plus: cartridge problem 8600
Message seemed to change all cartridges - I changed two a couple of days, so they need not all change - black was about due for a change, so I took them all out - replaced black... had the same message... Replaced all - same message now also "one or