BootCamp Windows does not start after you have enabled disk encryption

Hello everyone, I am in a desperate situation and I need your help. Here is my sitatuaion.

I have 13-inch MacBook Pro (early 2011). I put an SSD inside as my main drive and I also put an extra drive (HDD) in the optibay instead of my drive superdrive. The structure, I had was this:

(1) my entire SSD was my OS X disk.

2 my HDD optibay had three partitions: partition backup Time Machine, a) b) Extra partition (for stuff like media), c) Windows partition with Windows 7 installed.

Had that Setup for a long time and everything worked very well, my SSD has been saved on the Time Machine partition on the HARD drive in my optibay.

Then, I decided to turn on the File Vault 2. First of all I did for the SSD with my OS X on it. Everything went well and I could always start my Windows 7. Then, I decided to encrypt my Time Machine backup (because what's the point to encrypt the main system disk if you do not encrypt the backup as well?) -Here too everything went well.

In other words, until I needed to start Windows. I have restarted my Mac, hold down option, the picker contraption came, but there was no windows to the choice. I came once before (but), so I knew I could always start in it.

I jumped into my USB thumbdrive with fairing on it, he chose and he gave my start on the Windows partition option. But this time it did not work, I got an error message saying my there is no bootable device or something like that.

I have confidence in turning the things of encryption for the partition of Time Machine (which is on the same HDD as my Windows partition) screwed disc here.

The only question is: can I fix, start Windows, without having to install it from scratch? What I want is to have encryption enabled for both drive my main SSD where I have my OS X installed AND the partition of Time Machine that is on the disk in the optibay HARD and also have a Windows partition on it, but still be able to start Windows.

I am running 10.11.13 El Capitan.

Can you help me somehow? Here is my list of cs diskutil:

/ dev/disk0 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * GB 128,0 disk0

1: disk0s1 EFI EFI 209.7 MB

2: Apple_CoreStorage Macintosh 127,2 disk0s2 GB SSD

3: disk0s3 Apple_Boot Recovery 650.0 MB HD

/ dev/disk1 (internal, physical):

#: NAME SIZE TYPE IDENTIFIER

0: GUID_partition_scheme * GB 500,1 disk1

1: EFI EFI 209.7 MB disk1s1

2: Apple_CoreStorage Time Machine 150.0 GB disk1s2

3: disk1s3 Apple_Boot Boot OS X 134,2 MB

4: Apple_HFS Extra 300.0 GB disk1s4

5: Microsoft Windows 49.5 GB disk1s5 data base

/ dev/disk2 (internal, virtual):

#: NAME SIZE TYPE IDENTIFIER

0: Apple_HFS Macintosh SSD 2 GB + 126.8

Logical volume on disk0s2

406F3A62-89AE-4F91-BEEF-B8CE0B16C8EF

Unlocked encrypted

/ dev/disk4 (internal, virtual):

#: NAME SIZE TYPE IDENTIFIER

0: Apple_HFS Time Machine disk4 GB + 149.6

Logical volume on disk1s2

0567D276-3738-4776-9CC5-B69F922B0A0C

Unlocked encrypted

Your problem is not related to FileVault2. Your question should have begun when additional Apple_HFS was created. Please after the release of

sudo fdisk/dev/disk1

If you have a problem with your Mac, you can potentially lose the SSD and backup TM. It is not an optimal configuration. A TM must be physically separated from your Mac, so you can restore the TM backup to a new Mac, if necessary.

Also, since you removed the optical drive, re - install Windows on your 2011 model is a very rough road to travel.

Tags: Windows Software

Similar Questions

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • Help my pc does not start after you have uninstalled the video driver

    Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

    RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

    http://www.computerhope.com/beep.htm

    If this post answers your question, click mark as answer .

  • Portege R830 - Windows does not start after I have install Comodo Firewall

    Good afternoon

    I bought today a Portege R830, and after the Windows configuration, the first program that I installed was the popular free Comodo Firewall. After that I restarted, Windows 7 unbootable. It would be stuck on the user login screen and I know it's a problem with the firewall because if I do a system restore to the restore point created by Setup of firewall, windows restarts.

    So I ask if there is any inconsistency between the firewall and software on the Toshiba. A that someone already had this problem? I tried to solve this problem throughout the day with no results. I even re-installed Windows 7 using the Toshiba Recovery and the problem persists. I really like the Comodo and I want this firewall on my laptop, but Windows does not just start!

    Any help would be apreciated.

    Hi jillefsky,.

    Have you disabled the Windows Firewall before you start with the installation of Comodo Firewall? As far as I know, Portege R830 is delivered with preinstalled McAfee security software and you must remove this program before you install other security tools.

    Generally this has nothing to do with Toshiba and it s advisable to contact Comodo directly. They may know about this so they can give you a proper answer.

    But I put t understand why this program is so important to you. Windows already has an internal firewall so that these programs are not necessary in my opinion. Just install a good antivirus like AntiVir and enable the automatic updates of Windows. All that s!

  • Satellite Pro A60 EN does not start after you have used the recovery CD - isapnp.sys missing or damaged

    Help am stuck with it.

    Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.

    Windows could not start because the following file is missing or corrupt:
    System32\drivers\isapnp.sys

    You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.

    I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error

    "File ntkrnlmp.exe could not be loaded.
    The error code is 4, sometimes it's 7.

    I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive

    So any suggestions as to what wrong here

    Thank you very much

    I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.

    [You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]

    Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.

    Feedback would be much appreciated

  • SRM does not start after you have moved the database

    We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

    so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

    Any ideas on how to remove the old certificate or work around this error?

    Thank you

    I think the error message is misleading in this case and the problem is not related to the certificate.

    I still think that it is permission DB / configuration number.

    Following links may be useful:

    http://communities.VMware.com/thread/212157

    http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

    Michael.

  • Bootcamp does not start after you have created the new partition

    Hi, I accidentally created a new partition on my mac OSX 10.11 and then discovered that my bootcamp would not start. After that, I deleted the partition but the disk for the BOOTCAMP partition identifier was disk0s5 instead of disk0s4. is anyway to fix this?

    Thanks in advance.

    The disc is now disk0s4, but when I try to boot in bootcamp, it says no bootable disc detected

  • Windows does not start after you use vaio recovery

    I tried to reset my computer to factory settings and programs. I used the for Vaio recovery tool do. During the course of my computer restarted as it should. But as Windows was returning back I get an error of "Windows Boot Manager" say a file called ntoskrnl.exe was missing or corrupt with status 0xc00000e9 upstairs he provided a way to fix: cannot start Windows. A recent hardware or software change might be the cause for the problem:

    1. Insert your windows installation DVD and restart.

    2. choose the language settings, click Next

    3. click on repair your computer

    After step 3, the repair tool said that it could not solve my problem.

    I tried to redo the recovery twice for nothing doesn't.

    I tried to use the memory diagnostics.

    I tried to change the default BIOS settings.

    I tried to use the chkdsk command in the console installation disc

    I don't have a backup disk.

    You could try System Restore option under the recovery tool if startup repair option has not resolved the problem. After the execution of the Image recovery system on your VAIO computer and you still have the same issue, then you may need the recovery disc. If you have any errors after the diagnostic equipment, then the recovery partition was damaged already.  You can buy the recovery disc for your computer of Sony parts and accessories or parts distributor authorized Sony.

    If my post answered your question, please click "accept as a Solution.

  • Tecra A9: Windows does not start after you turn off multiprocessor in BIOS

    I use a Toshiba Tecra A9 with a Core 2 duo. I need to change the bios setting to run a special program, "multiprocessor: disable. Now, I've changed back to the bios setting "multiprocessor: activate ' and win xp stop start after login. With "multiprocessors: Disable" the computer starts normally. If I press F8 after starting the computer and select save mode, the computer starts.
    I don't have any idea what I can do to solve this problem.
    Any ideas?
    Thanks in advance.
    Ulli

    Maybe the ACPI-Multi CPU driver was not installed correctly or a MS patch is necessary.
    I read on some similar topic websites.
    It is very important that the XP SP2 has been installed and other patches.

    At this time the new Win XP SP3 is available. I think that this is a beta version, but I already installed it on my XP OS.

    So maybe you should enable the multiprocessor option in the BIOS then you need to install the XP again. Then install all available Ms patches, fixes and eventually the SP3 too.

    Then check again.

    One question; Are you using the newest BIOS?

  • Partition Windows 10 does not start after you have created the new internal drive

    I'm running OS X 10.11.2.

    I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.

    So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w ":

    "Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »

    I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.

    I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!

    EDIT: I unfortunately do not back to the time Machine.

    Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .

    Please after the release of

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

  • An another bootcamp Windows does not start after installing OSX Yosemite

    Someone who can help, lonely T Special attention:

    In addition, my mac has been configured with a MAC Partition, a Partition of media (I've used this to share my media iTunes between the two BONES) and finally my bootcamp partition.

    When I upgraded to Yosemite I lost access to my bootcamp, and a message appeared "no bootable disk. I searched through many of your forms to try to find a solution and at one point, I found this threadrepair Boot Camp after having created the new partition and I followed these steps:

    Enter "7"

    Press the return key

    Enter "Pavilion 4.

    Press the return key

    Enter 'p '.

    Press the return key

    Enter 'w '.

    Press the return key

    Enter 'y '.

    Press the return key


    Now, I am still unable to load the bootcamp and I have a screen black different 'non-system disk, press any key to restart '.


    I think I maybe I can have pushed me further by following the directions above.


    This is the terminal:


    Last login: Fri dec 11 20:34:33 on console

    Chriss-iMac: ~ the chriswilloughby list $ diskutil

    / dev/disk0

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 1.0 TB disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS Macintosh HD 200,1 GB disk0s2

    3: disk0s3 Apple_Boot Recovery 650.0 MB HD

    4: SUPPORT database Microsoft 494,3 GB disk0s4

    5: Microsoft database BOOTCAMP 305,0 GB disk0s5

    Chriss-iMac: ~ list of cs chriswilloughby$ diskutil

    No logical volume group CoreStorage found

    Chriss-iMac: ~ chriswilloughby$ sudo TPG - vv - r show/dev/disk0

    Password:

    See the TPG: / dev/disk0: mediasize = 1000204886016; SectorSize = 512; blocks = 1953525168

    See the TPG: / dev/disk0: MBR suspicious to sector 0

    See the TPG: / dev/disk0: Pri GPT to sector 1

    See the TPG: / dev/disk0: GPT Sec at sector 1953525167

    start index size summary

    0           1         MBR

    1 1 Pri GPT header

    2 32 table GPT Pri

    34 6

    40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

    409640 390759112 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

    391168752 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

    392438288 1520

    392439808 965394432 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    1357834240 595689472 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

    1423 1953523712

    1953525135 32 table dry GPT

    1953525167 1 dry GPT header

    Chriss-iMac: ~ chriswilloughby$ sudo fdisk/dev/disk0

    Disk: geometry / dev/disk0: 121601/255/63 [1953525168 sectors]

    Signature: 0xAA55

    From end

    #: cyl hd s - cyl hd s id [Start - size]

    ------------------------------------------------------------------------

    1: EA 1023 254 63 - 1023 254 63 [1-409639]

    2: AF 1023 254 63 - 1023 254 63 [409640-390759112] HFS +.

    3: AB 1023 254 63 - 1023 254 63 Boot Darwin [391168752-1269536]

    * 04:07 1023 254 63-1023 254 63 [392439808-965394432] HPFS/QNX / TO THE

    Chriss-iMac: ~ chriswilloughby$

    My bad

    Solitaire T

  • Windows does not start after the update...

    Hope someone can help with this,

    I just installed the update sp1 for my computer for Windows Vista Premium Home dir all installed with no problems, but when I restarted my pc, Windows wouldn't start. The only thing that is on display is a black screen with Windows Error Recovery on top, then he said "Windows does not start. A recent hardware or software change might be the cause. I tried to restart it in different ways, but nothing. Then he said: I have to insert my OS drive to try to fix, but that's not even start. Everyone knows about this problem? This has happened right after that I installed the update...

    L.Butler,
    Are you able to boot from your Vista DVD or recovery partion and run the Startup Repair tool?  If you do not have a Vista disc so make sure that your computer is configured to boot from the CD drive before booting from the hard drive.  Once you start with support for Vista select the "Repair your computer" option and first run "Startup Repair".  If that is not correct the problem then boot with Vista support and select the option "System Restore" and choose a date prior to the update install.
    Once you are able to boot normally again, then I suggest that you are looking for virus\malware.  SP1 was released in April 2008.  So if you install earlier means there may be other problems on your system.  If you have a backup of your current personal data then I recommend to do a clean restore to install\factory.  Then immediately install antivirus software, and then do all Windows updates before installing other software. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • IdeaPad Y530: windows does not start after that laptop went to sleep mode.

    Hello

    More great frustration in my life have laptop brand new, this for me.

    After that the laptop goes into mode 'sleep', I'm not able to go back to Windows. All light are there and watch as usual, but there is no Lenovo Welcome logo or any other sign of normal behavior. I can turn it off by holding the button market / stop, but when I turn back the problem is still there. Windows does not start.

    I was able to go back to Windows that day after leaving just laptop without any power and battery.

    I called Lenovo and they suggested to disable the standby modes use put into hibernation. I did it. When the screen saver started, something went wrong, computer got froze and I had to restart, but then again, black screen and no reaction.

    Anyone have any ideas?

    Thanks for the reply.

    That's what I end up doing. OnKeyrecover does not work either so what spoke on the phone with Lenovo. Then he is gone now for repair.

  • My phone is lock and does not start after you install an update to Windows.

    After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

    Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

    I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

    I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

    Thank you.

    After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

    "part 3/3 (0%) update installation." ... and restart the system.

    See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

  • Windows does not start after Windows update.

    Original title: udate Windows vista problems

    I have dell dimension e520, Windows Vista home Basic, 32-bit SP 2, and in January, I upgraded RAM to 4 GB to 1 GB. McAfee security on the computer. The system worked until the last updated (March 2012).  The computer does not start correctly after March 2012 update and System Restore restores to February 21 implemented to date.  The computer will then automatically install the updates again and restart, after which the computer will not start up again (an annoying loop).  I also lose saved data after the system recovery sets return date.  I tried Microsoft Fixit, which did not help.  Thanks for your help. Hurry LOL available updates.

    PS computer says 'patch blocking windows to start.  Some updates successfully installed previously, but on the next time you download windows updates, that try to download updates and others have "failed."  Sorry for the confusion but I'm rushing and I try to include all the symptoms, I don't see dealing with the problem I have.

    I had to take it to get fixed, thanks to the effort.  The person fixing said he ran a few cleaning tools and which appeared to fix.

Maybe you are looking for