BootCamp6: Microsoft Windows 10 network software error

Similar Questions

• Store Windows cannot install software, error code: 0 x 80248014

  Store Windows cannot install software, error code: 0 x 80248014

  Original title: Windows Store

  Hello

  
  I suggest you rename the temporary folder C:\Windows\SoftwareDistribution:

  1. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net stop WuAuServ

  2. click on start, run, type: %windir%, and then press ENTER.
  3. in the opened folder, rename the folder C:\Windows\SoftwareDistribution to SDold.
  4. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net start WuAuServ

  Visit the Windows Update site to check this problem. If it works then it's a corrupted Windows Update file and we need to delete the folder in which it resides.

  Hope this helps, good luck :)

• Microsoft Window - Kodak EasyShare Software has stopped.

  A problem caused the blocking of the program works correctly. Windows will close the problem & warn if a solution is available. Windows says close the program. I waited for Windows to inform me on the solution. Nothing so far

  Installed software Kodak on 28/08/2010 @ 11:13 worked everyday until 09/05/2010 when I received above message after startup.

  What is the solution?

  Hi lppriestley,

  1. did you of recent changes on the computer?

  Method 1

   

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  If the previous step fails, then I suggest that you uninstall the Kodak of computer software using the Kodak removal tool and then reinstall the latest version and check if it works.

  For Kodak removal tool

  http://www.kodak.com/global/en/service/downloads/private/xp_vista_98_ClearUtility.jhtml?App_Code=essw

  EASYSHARE software downloads

  http://www.kodak.com/global/en/service/software/EasyShare/en/dln_ekn026079.jhtml?OperatingSystem=windows_vista&downloadLanguage=en#

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with & Microsoft Windows updates. The error codes are 0x8024a000 and 8024a 000 Windowsupdate. I have not received a Windows or Microsoft Update for February 2013.

  I ran the troubleshooting and it fixed 2 problems but when I check the updates I always get this error message.

  Colleen,

  Click Start

  Type: cmd

  Right-click on cmd in the start menu and select "Run as Administrator"

  Type: net stop wuauserv

  Press enter

  Type: ren c:\windows\SoftwareDistribution softwaredistribution.old

  Press enter

  Type: net start wuauserv

  Press enter

  Type: exit

  Press enter

  Reset

  Try to download updates

  `~`

  The current time and the date now in Baja California, Mexico

  09:23
  Tuesday, June 4, 2013
  DST - 0700 UTC
   
  UTC/GMT is 16:23 Tuesday, June 4, 2013
              
  Current weather conditions in San Felipe

  Claire81 ° F / 27 ° C

• Windows operating system; Version: 6.0.6000.16386; Event ID: 200; Event source: Microsoft-Windows-Diagnostics-Performance;

  Windows operating system; Version: 6.0.6000.16386; Event ID:200; Event source: Microsoft-Windows-Diagnostics-Performance; This error arose mutiple times in the last month but has critics in the last days. How the world I remedy this? Thank you

  Hello

  Apologize for the delay in response. Please see the following link that talks about this problem:

  http://social.technet.Microsoft.com/wiki/contents/articles/3186.event-ID-200-Windows-Diagnostics-performance.aspx

  Note: The information mentioned in the link is also applicable to the Windows Vista operating system.

  Clean boot Warning: Take care to put the MSCONFIG Utility to Normal startup once you are done with the troubleshooting steps.

  Hope the information is useful. Back to us for assistance.

• Error 1606 could not access network location %APPDATA%\microsoft\windows\sendto when installing iTunes

  Original title: cannot install Itunes because of (Error 1606 could not access network location %AppData%).
  Please can someone help me?

  Hello

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 1:

  a. Click Start and typeregedit into the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.
  
  Method 2:

  Run Fixit from article mentioned below. It can fox the most problems with Error 1606.
  http://support.Microsoft.com/kb/886549

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error in registry: HKEY_CURRENT_USER\Software\Microsoft\Windows Live Contacts\Database

  HKEY_CURRENT_USER\Software\Microsoft\Windows Live Contacts\Database

  This error keeps occurring on my Scan of the registry - how can I get rid of him?

  What you need to get rid of is whatever program you use to make registry scans.  In general, they do not work and some are really dangerous (I've seen cases where they did so much damage all the Vista system was to be installed as a clean boot).  Do not pay attention to the mistakes that these programs show - they may or may not be true and 'fix' can cause more harm than just leave them alone.  Most are not really errors.  You risk serious damage to your system if you continue to use any scanner registry, registry booster, Fixer registry, registry repair tool or anything similar.  Vista doesn't have these programs - it does a job perfectly well to clean the registry on its own.

  Please take my advice and uninstall and never use this device or any other product like it if you care about the integrity and preservation of your system and your registry database.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Network error occurred while attempting to read C:\Users\Bob\AppData\Local\Microsoft\Windows\TemoraryInternetFile\Content.IE5\YFKRN3UL\owasmime[1].msi

  Can someone help me with this error.

  Network error occurred while attempting to read C:\Users\Bob\AppData\Local\Microsoft\Windows\TemoraryInternetFile\Content.IE5\YFKRN3UL\owasmime[1].msi

  It is causing me not to be able send emails at home through the use of the email of my work? Any ideas?

  You should contact the IT Support for your business to ask for help with that.

  This part of S/MIME is required for e-mail encrypted and other Marcelin with Outlook WebAccess functions and therefore the company email server is also involved.

  Rob

• _ ERROR 1402 could not open Key__ HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS__

  When I try to download the latest update to Adobe Reader, I get the following error message:

  ERROR 1402 could not open key
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Current Version\Run\OptionalComponents\MSFS

  I searched this error on the Adobe Reader website and they said to uninstall the current version of Adobe Reader on my computer with the command install/uninstall via the control panel - I tried to do, but the I get the same error message when I try to uninstall my current version to reinstall.  I'm so caught up in a "catch 22".  I really need to know how to correct this error so that I can update/install this program.

  Thank you

  Sandi

  sandib5532,
  Try to use The Windows Installer Cleanup utility and see if it is able to remove your current version.  Alternatively, you can consult the Adobe removal instructions.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error 1402 could not open key HKEY_Local_Machine\software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

  Error 1402 could not open key HKEY_Local_Machine\Software\Microsoft Windows\Current Version\Run\Optional Components\IMAIL. Check that you have sufficient access to that key or contact your support team.

  We have solved this problem by granting explicit permission at the same time "domain users" and "domain administrators" you can plug in "domain" in the field and the search for the users and select them.  But this solved the problem for us.

• Error when printing from a memory card: "year error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found connection .This has not been restored"

  Original title: there is an error occurred while reconnecting to \\epson 8af524\memory z card Microsoft windows network .the network path is not found .this connection has not been restored

  error message for a memory card has it printed

  Hello

  ·        Have you been able to print from memory card sooner?

  ·        How are you connected to the computer from which you are trying to print?

  This occurs when a computer uses the network map to connect to another computer to share files.

  To fix this problem, do one or more of the following methods.

   

  Method 1: Control equipment

  (a) ensure that the computer with file sharing turned on.

  (b) ensure that a hub network or router is powered.

  (c) ensure that the cables are well connected.

  If this does not resolve the problem, go to method 2: ensure that network resources are properly shared.

  Method 2: Ensure that network resources are properly shared

  Share a folder on a drive, then connect to the shared drive, follow these steps.

  Step 1:

  To make a folder that is located on the accessible hard drive on another computer, follow these steps.

  (a) right click onStart and then click Explorer .

  (b) right click on the folder you want to share, clickshare , and then click share this folder .

  Step 2:

  To connect to the shared folder from another computer, follow the steps below.

  (a) clickStart , then click run .

  (b) in theOpen box, type \\computer\share (where computer is the name of the computer where the resource network and share is the share name of the shared folder on that computer).

  (c) clickOK .

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sharing of readers do not reconnect - error "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  Original title: Shared readers do not reconnect

  I have two PCs connected wireless. A laptop (Vista Business) was the drives mapped to actions on the other PC (XP). Whenever the Vista PC is started or out of hibernation, or after only a short period of time these discs are not available. Click on the drive in Explorer to display the message "an error occurred during connection [drive letter]: [share name] Microsoft Windows network: the local device name is already in use." This connection has not been restored. »

  If I click on 'Network' within Solution Explorer, the XP PC is not visible. The only way that I can "reconnect" these disks is to go into my anti-virus (Trend) and open the network map. This shows the XP PC and then the shares are available through Explorer - XP PC is still not visible by clicking network however.

  It started only happens in the last two months - cannot locate exactly when, but quite recently. I use connections to store small files and backup critical files a few before nailing the laptop away and it is quite annoying to have to go through this routine every time.

  Any ideas?

  Just in case it helps others - I found that if I make sure that my XP PC has a fixed IP address, and then set up the shares so that they are defined using the IP address and not share names, then I do have more problems - seems like it's something to do with Windows solve the share names rather than something to do with the personal firewall after all.

• I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) during the installation of iTunes and QuickTime on my laptop.

  I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system).  Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC.  But I still get the same error message.  What Miss me?

  ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run

  I tried all the advice support online from Apple without success.  Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me.  I refused, and this is why I post this question on the Microsoft Forum.

  Did you follow this advice?

  "Did you download and save iTunes on the desktop > then right click > select run as administrator to install.

  And do you have displayed in iTunes community that is free to do?

  Ask the question in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

• Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

  Hi all

  The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key.  Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
  I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.

  Hi Vincentand welcome to the VMware communities!

  This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry.  Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?

  See you soon,.

  --

  Darius

• Errore:HKEY_CURRENT_USER\software\microsoft\windows\current\version\explorer\fileexts\openwhthlist\

  Non riesco ad eliminare some if del registro di sistema, cui:HKEY_CURRENT_USER\software\microsoft\windows\current\version\explorer\fileexts\openwhthlist\ fra

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx