Bootloop after editing build.prop

Similar Questions

• The last version doesnot open new tab with google even after editing about: config

  Until two days ago, that the new tab opened with Google.com. After the introduction of tiles in a new tab where the tiles with suggested sites are displayed, even after editing with subject: config, there is no change. Set in a new tab button suggested only the sites or blank page that crushes everything: config it seems

  Firefox has tiles on the new tab from Firefox 13 page. But something has just changed: 41 Firefox no longer use the browser.newtab.url parameter in topic: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  After editing an image in windows Photo Gallery can't save the picture. I get a message that tells me that something is wrong with the application. How to fix this problem?

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Photo-Gallery-frequently-asked-questions

  It will be useful.

• Cannot save a picture after editing: not enough memory [was: lightroom]

  I can't save my photo after editing... it does not enough memory... yesterday, I found a button flatten the I could save... but now I can't find this button... Please help?

  You have other programs running when working in Lightroom?

  If so, their closure could help a bit.

  But the real solution is to go get more RAM, 8 GB is considered a minimum for Lightroom.

  If you have a 32-bit operating system, increase the RAM won't help, because an entire application can only access about 3 GB.

  So to enjoy more RAM, you must have a 64-bit operating system.

• Bug? Save fails after edited transformation - java closed connection error

  Hello

  I have a problem with the registration of ODM workflow after editing of node transformation.

  
  Processing node, I did transform change for the variable 'IMP_APPL_PA_EMP_STS_CD_REV_BIN' bin variable, sql code so what:

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013', '050', '061', 100')) then 3

  When ('IMP_APPL_PA_EMP_STS_CD_REV' ('015', '020', '021', '022', '023',' 060')) then 4

  When ("IMP_APPL_PA_EMP_STS_CD_REV" is null) then 1

  3 other

  end

  Validation is going well, but after I press save I get the message:

  Cannot save TDW_RISK/Test/binn_test (java.sql.SQLRecoverableException: connection is closed).

  I tell myself that when I put shorter case example - when, sql

  case

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('011', '040', '070', '080','090 ')) then 1

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('012', '014', '030', '051', 990')) then 2

  When ('IMP_APPL_PA_EMP_STS_CD_REV' in ('010', '013','050 ')) then 3

  3 other

  end

  ewerything is ok. When I add one, two or more "channels" box when example: 061', '100' same mistake happen again.

  I'm trying to do with dif datasource in various workfolows, but nothing helped.

  I found workaround using SQLNode and it works it is not best but to use the transformation of other variables.

  Any idea why is this happenning? Restrictions in node SQL Developer to transform?

  System: SQL Developer Version 4.0.0.12, Database 11.2.0.2

  Kind regards

  Kreso

  Whatever it is, it seems that in SQL Developer 4.0.2 and minor data issue is resolved.

• Lightroom saved unwanted XMLs after editing

  Sometimes, after editing, Lightroom would either just directly save any changes I made to the XML sidecar files in the photo directory or it will display a small two-way arrow on the picture invites me to save changes to the file. I don't want to.

  As much as I know, save editing changes to XML sidecar files is a feature that I need to activate. I don't think I did. Is that what Im missing?

  

  This seems to be resolved in the version.6.  Very good Adobe

• Problems using again after editing

  Once I edit a film strip, I go to Adobe Dynamic link and then "send again" half way what fact transcoding it close and restart my PC.

  I use Win 7, 3 GB of memory, a HARD drive of 1 TB to dedicate.

  There is no explanation or suggestion to stop this problem? or there is another way, so after editing I can burn the movie to a DVD and watch it on TV?

  Thank you very much

  Juan

  Export your timeline first media using a pre-configured with the good rate MPEG2-DVD.  Import into your project again.  If you have selected a DVD MPEG preset in the list of the SOUL, still do not have to re - encode.

  This method is more reliable than the use of dynamic links.

• After editing in LR, then export to ch, additional file editing, save a TIFF to JPEG file in Dropbox, thumbnails appear to be correct, but, as soon as I send the in an email, the desaturated become?

  After editing my images in LR, then exporting to ch for further editing, then by saving the TIFF format to JPEG file in Dropbox, images of the thumbnail to look good. However, when I open them in a photo viewer, or email them, they become desaturated. With the help of Windows 10. Anyone know why that would happen? It does not occur when I change a JPEG image. This happens only when I edit a raw in LR, then export to ch and, further editing and change the TIFF to JPEG file type.

  They will have to be registered to the sRGB colourspace, check the setting when you export for email...

• Forms paper barcode grayed out after edit

  Hello

  I am facing a problem with the pdf form that I created with Adobe Livecyle Designer ES 4 Version 11.

  I have four fields (3 textfilds and 1 drop-down list) and a paper form barcodes on my form (PDF417). IM using fields to fill in the data of barcode. After the user changes the area of barcode fields becomes gray. How can I show barcode update on the form.

  It is the original form.

  

  This is what form looks like after editing fields.

  

  And this is the collection for bar codes.

  

  Thanks in advance.

  Some bar codes will work if the forms have been activated through LiveCycle Reader Extensions (a server product), I'm afraid.

  I recently published another solution.

• Is it possible to export a photo after editing and keeping the captured date?

  Is it possible to export a photo after editing and keeping the captured date? I got the impression that before Lightroom has not changed the date; now it doesn't...

  Please re - upload the same image that you exported and check the metadata.

  ~ UL

• Difference in images after edit

  

  I was shooting timelapse, photos taken with the same settings and three seconds apart.
  Images of .raw looked and was still. After editing, some differences have occurred. If you look at the background images. This is the way it should be. But the top image seems to have lost some contrast. This has happened to a few images. Why what happened?

  If you look more closely. On the top of the images, you can see a few black undesirable object. This is my window. I could not open it no more, and the preserved wind move the frame of the window in my opinion. My floor is also a bit uneven, so whenever I went to check on my camera the inclined device. I come to stabilize and to crop images. But, the low contrast problem on the top of the page images seem to occur on the images when I stepped in front of the camera and created a movement. Still, the .raw image looked anyway. After is change what has happened. Shot in manual mode.

  That's my analysis that the black window in the top frame is initially the difference in brightness between the two raw images even if exactly the same exposure of the camera and Lightroom adjustments have been used.

  Toning Lightroom adjustments are a bit non-linear, that is, the content of the image indicates how things become lighter and darker.  This is especially true of whites, highlights, shadows, blacks and the clarity.

  In this situation, the frame at the top of the window is a darker dark object that whatever it is in the rest of the image, then it keeps the obscurities of becomes too dark, as if she wasn't there.

  It actually means that you cannot use shadows, blacks or the clarity with this sequence of raw due to varying amounts of black images.  The amount of clouds shading image will have also some effects, especially for clarity, but less compared to very dark or very bright pixels.

  For this sequence of images, the best thing to do is probably the FIRST crop images and the same so that no foreign window frame shows up on any of them, and THEN synchronize your white balance and other adjustments without colors and other tones - Reduction noise, sharpening and THEN do an Export of images in 16-bit with a color profile of ProPhotoRGB TIF.  Reimport into LR and do your toning and color adjustments.  It does not crop the raw images, because the toning adjustments always watch all pixels, including those outside the crop area, not only the visible pixels.

  RAWs and hair are not exactly the same thing in regard to the toning and color but you could start with toning bullies and synchronized with all hair colors settings and see if there are other adjustments.  Here is an example of my fact that when the first column of images are your two raw files with the same settings and the second column only being two cropped hair with the same settings.  You will notice that the Hill, especially the lower right, a different brightness between the two raws but the same brightness between the two objectives.

  

  --

  I don't know which would cause the difference in color in the night photos, above, unless it's a slow drift caused by the sensor of the camera warm-up with the use and the increase in high-ISO noise and affecting some colours more than others.  If you see a slow drift then this is probably the situation.  If you see the color to random change it back between the different frames, it's probably something else that I don't have a theory without more information.  A random fluctuation in color between different images usually occurs at the inside with fluorescent lighting, because the color and brightness changing with the a/c 50 Hz or 60 Hz frequency.  Cameras Nikon for a few years and the new cannons, detects this fluctuation and the shutter with the maximum brightness for each shot of a burst will look like the time.

• Illustrator crashes after editing in model mode

  I use Illustrator CS6, Windows 7, Intel (R) Core (TM) i7-3770 CPU @3. 40 GHz, 16 GB RAM, 64-bit operating system. I use the characteristic editing model a lot, and recently it starts crashing, usually, when I try to save after editing in model mode (it started just to do this). I don't know why he started doing that, and it doesn't have anything to do with the complexity of the design. Any advice would be appreciated.

  Since you said recently watched crashing, very probably reset you AI prefs will solve this problem.

  Start Illustrator, then immediately then press Ctrl, shift, Alt to reset the prefs.

• files of jump at the end of the list of the thumbnail after edit in Ps

  Hello

  Files of jump at the end of the list of the thumbnail after edit in Ps or any other plugin application.

  So the question is... how I make them stay in the order and the new stick with original folow.

  Help, please.

  Thank you

  Adrian

  Adrian_from_London wrote:

  It's "the stack with the original", but the two files of will jump to the back... I was looking for a command that would suit tiles in alphabetical order, but nowhere to be fond.

  Sounds like you have the folder sorted by "added order." Just change it to "filename". If you are in the library, under the Pictures toolbar shows you the current sort order (if you chose to show by clicking the small triangle to the right end of the toolbar).

  Who help me?

  Bob Frost

• cfgrid after edit

  I have 2 questions about a cfgird:

  (1) after editing an item in a cfgrid a red arrow appears above the changed item.  I have a custom afterEdit event handler that informs the user that the field has been updated, so I don't want the red arrow to appear.  How can I get rid of this red abderhamanez?

  (2) when a row is in edit mode, if the user presses ENTER to complete the change, the next line automatically in edit mode.  How can I prevent this?  I wish that the current line to simply end.

  Thanks for your help.

  Yes... This is where the change needs to be done.

  It should look like this, after the change,

  .x-grid-row-selected td, .x-grid-locked .x-grid-row-selected td{
  /*color: white;*/
  }
  .x-grid-row-selected div, .x-grid-row-selected div, .x-grid-row-selected b, .x-grid-row-selected strong, .x-grid-row-selected i{
  /* color: white !important;*/
  }
  .x-grid-row-selected .x-grid-cell-text{
  /*color: white;*/
  }
  .x-grid-cell-selected{
  background-color: #316ac5 !important;
  /*color: white;*/
  }
  .x-grid-cell-selected span{
  /*color: white !important;*/
  }
  .x-grid-cell-selected .x-grid-cell-text{
  /* color: white;*/
  }
  

  HTH.

  (Please put a note here @ forums, if it is correctly solved your problem :-))

• iCloud 5.1 fails and can not reinstall after Win10 build 10586

  Yesterday my laptop with Windown 10 Pro N has been updated to build 10586.

  Since then, iCloud connector is broken. No synchronization on Photos etc etc.

  So as usual, I tried the action known as: disconnection from iCloud, Uninstall.

  After uninstalling, I restarted the laptop and downloaded the last connector (5.1.0.34) Apple iCloud.

  Now it start drinking again that he needs the 'Media feature pack "...

  "Ok" I thought... Maybe it was put back by winning 10 build 10586...

  Then downloaded and installed: 'Media feature pack for Windows 10 N and KN for Windows 10 editions' (Windows 10-KB3010081-x 64.msu).

  And indeed, it was not installed so windows installed.

  Restarted again just to be sure...

  Began to reinstall icloud, but always the same question asking missing "Media feature pack".

  I've found this thread: Missing Media Feature Pack Windows 10 x 64 V5.0

  But the answer 'resolved' is not applicable to this situation that there is no 'typical' to 'enable '.

  Someone at - it an idea?

  I'm sure this has to do with Windows 10 build 10586... but I can't solve it.

  Thank you

  MCA

  I found it!   his disorder, but here it is.

  If you have a Windows "N" or "KN" editing (I win 10 Pro N) then you need the "Media Feature Pack" to install the connector to iCloud.

  It is no secret more for most people on this forum.

  But wait what he...

  If you have recently updated your Win 10 to release 1511 build aka 10586, then you need a different version of this "Feature Media Pack".

  So:

  -Win 10 (K) N FRONT 1511 create aka 10586--> you need: https://support.microsoft.com/en-us/kb/3010081

  -Win 10 (K) N AFTER THAT 1511 build aka 10586--> you need https://support.microsoft.com/en-us/kb/3099229

  To make it even more complicated MS made a mistake in naming citation:

  Microsoft:

  Note the installer of this package identifies by error the update as "Feature Pack for Windows (KB3010081)" However, it's the package of correct update for Windows 10 N or Windows 10 KN build 1511.

  Hope that the above explanation will help people with the same question.

  It has helped me

  See you soon,.

  MCA