Boots Vista black screen with white cursor and nothing else (Black Screen of Death)

Similar Questions

• Defective boot to a black screen with white cursor and DDDP errors.

  I have a Pavilion h8-1020, which began to show a black screen with a cursor flashing after the initial splash screen.

  I ran all the options except a complete reset utility mode.  I downloaded the Dell Diagnostics Deployment Package and booted from it.

  I ran the tests and got these errors

  4 c 00:0522 - system Interrupt controller or device has failed

  These all failed

  4600:021E - SMBIOS unidentified LM78A

  4600:021E - Fan1 SMBIOS

  4600:021E - SMBIOS chip fan 2

  I put an old HD and it starts to boot to the operating system while it recharges.  It is further than he gets with the original drive.

  Any thoughts would be appreciated.

  Thanks, BC.

  It's the Dell forum, so why you post questions on a computer HP here?

  The Dell diagnostics probably will work correctly with the HP hardware so that the results are meaningless.

  Ask your questions on the HP forum...

• black screen and nice white cursor and Ctrl alt del will not work, I can not update shell

  black screen and nice white cursor and Ctrl alt del will not work, I can change the shell to the Explorer, but I can't unload or load the hive, what should I do?

  Hello

  Your question I know that some of these methods is not available now, however, all
  Convenience store is included just in case where win you some access as you try to solve the problem.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• problem with the CURSOR and WITH clause

  Hi guys,.
  
  I have never created a package before. I try to run it, but I get:
  ORA-06550: line 8, column 16:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 8, column 3:
  PL/SQL: Statement ignored
  
  I know that my problem is in the next section
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  
  
  Is the above correct?
  
  When I copy paste the "heart" of the query, it works very well. I really have a problem with the CURSOR and the declaration.
  
  Here's the code in its entirety. I know that the code is much more then he returned, but ignore this overload that was to do some tests to make sure that I can achieve any query request.
  
  CREATE OR REPLACE
  PKG_SPF_NATIONALREPORTS PACKAGE BODY IS
  
  PROCEDURE GET_NATIONAL_TOTAL_RESULTS (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor IN OUT C_RESULTS)
  IS
  v_io_cursor C_RESULTS;
  
  BEGIN
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  SELECT
  -START P_SelectFields
  r.cli_served,
  r.EIER,
  -END P_SelectFields
  r.RC,
  r.Year_ID,
  r.period_id,
  r.agreement_type_ind,
  CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT,
  YEARS.year_desc,
  RC_CODE.rc_code_id,
  RC_CODE.rc_code,
  AHRDA HOLDERS. AHRDA_ID,
  AHRDA HOLDERS. REGION_ID,
  AHRDA HOLDERS. PROVINCE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_DESC_EN,
  ROW_NUMBER() over (partition R.YEAR_ID, R.CONTRACT_Number_Text
  order by
  P.PERIOD_desc
  (/ / DESC NULLS LAST) AS r_num
  RESULT r
  JOIN period p ON r.period_id = p.period_id
  JOIN CONTRACT_NUMBER ON r.contract_number_text = CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT
  JOIN RC_CODE ON contract_number.rc_code_id = rc_code.rc_code_id
  JOIN AHRDA holders ON ahrda.ahrda_id = rc_code.ahrda_id
  JOIN AGREEMENT_TYPE WE AHRDAS. AGREEMENT_TYPE_ID = AGREEMENT_TYPE. AGREEMENT_TYPE_id
  JOIN the YEARS WE r.year_id = YEARS.year_id
  )
  SELECT year_desc
  -START P_SUMFields
  SUM (cli_served) AS sum_cli_served
  The SUM (eier) AS sum_eier
  -END P_SUMFields
  OF got_r_num
  GROUP BY year_desc
  ORDER BY year_desc
  ;
  
  io_cursor: = v_io_cursor;
  
  END GET_NATIONAL_TOTAL_RESULTS;

  Agree - all this talk of loops FOR is completely irrelvant.
  A refcursor is usually the exact mechanism to return a result set.

  What is C_RESULTS?

  Just use SYS_REFCURSOR.

  No need for local variable.

  OUT why? Not just walk OUT?

  PROCEDURE GET_NATIONAL_TOTAL_RESULTS
  (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor OUT SYS_REFCURSOR)
  IS
  BEGIN
   OPEN io_cursor FOR ...
  END;
  

• White PSE 6 welcome screen and nothing else

  Started all of a sudden, no problem previously. Installed on an iMac running 10.5.8. Blank home screen and nothing else. Tried to reinstall... nothing works... help!

  What happens if you turn off your internet and then start PES 6?

  There has been a rash of posts in the forum on photoshop cs3 photoshop, do something similar, I wonder if it is related

  PES 6 is based on the cs3 code.

  If it's the same thing, then maybe it's screen recording your seeing (or do not see because it is empty)

  If you start PES 6 without internet on and the registration screen that you see, press never register and if I hope to solve the problem.

• I pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  pay $49,99 and the application does not change "open" again in "trial"... I restarted the creative cloud with the login and nothing change...

  Wow!

  So many entries of URL blocker, Adobe, this is the reason why you are unable to activate the CC apps.

  Follow the procedure below:

  • Remove all entries that has name of adobe. Then close the Textedit, it will Autosave.
  • Make sure that there is no entry of Adobe on the inside.
  • Then copy and paste the Hosts file in folder etc.
  • We replace the modified hosts file that we had copied on the desktop with the original Hosts file inside the folder etc.
  • When you are prompted, the authentication by password Mac,
  • Be sure to select the option Replace ...
  • Once you have replaced the Hosts file, double click on it again and check if the Hosts file is free of Adobe entries.
  • In the affirmative. launch creative cloud application and load the list of Apps and check.

• my mouse wheel controls only my volume and nothing else

  My mouse has suddenly begun to control my volume and nothing else, it won't scroll on any page, does not work in photoshop and will not work on one of my games, I haven't downloaded a mouse wheel for volume control programs and I have uninstalled and reinstalled the drives for my mouse Reset my computer several times, checked in the control panel mouse settings and can't find anything that may be the cause of the problem, any suggestions?

  I came here with the same problem and tried all of the above. I came close to reformat my hard drive, but the answer turned out to be very simple.

  I replaced the batteries in my wireless mouse and it works fine now. :)

• I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  I'm looking for something, or even click on a link "for you", that he - and nothing else than the spinning wheel.

  It is easier to go to YouTube, which I prefer not to do.

  < published by host >

  It's real comments to your message:

  You talk to other users here, not to Apple directly.

  Click below and select the product (s) on which you have any concerns or suggestions:

  http://www.Apple.com/feedback/

  Then select your product

  When you contact Apple to give them feedback, note the statement at the top of this page:

  'Use the form below to send us your comments. We read all comments

  carefully, but please note that we cannot respond to comments you

  submit. »

• DWCS # previews only PHP include and nothing else

  Migration of DWCS2 towards my whole site DWCS3 PHP display mode "Code and Design" correctly. They seem to work fine if I make changes in the Code and download. It is very difficult for me to work that way, though.
  
  When you work in CS2 design mode would not display includes the "PHP" as I expected. Everything works beautifully on download on our server. Now, however after upgrade to CS3, Dreamweaver seems to want to only display the first statement 'PHP include' and nothing else that I did on the page.
  
  I created a few screenshots to the following address. Comapison between CS2 and CS3 Code and Design views
  
  Any help would be greatly appreciated. Im sure I must have done something incorect when I built the site initially, but I don't know what. The online site can be accessed at Heart Center of Wyoming
  
  Please let me know if any other information is required.
  
  Best regards and thank you.

  Thank you, David.

  I knew it was something basic.

  Best regards.

• Black screen with white cursor at the end of the New Installation

  I try to perform a new installation of Windows Vista Home Premium (64 bit) on a Dell Inspiron 1545. The hard drive was completely wiped out and I don't have the original disks (I use a Vista CD from another computer Dell). Installation is proceeding normally up to the phase of "Complete installation" where it crashes for almost an hour and then goes to a black screen with a white cursor.

  I have tried all the following suggestions (found here and on other sites online):

  Reset the BIOS has no effect.

  By pressing SHIFT 5 times has no effect.

  CTRL + Alt + Delete has no effect.

  Rename to the event log file has no effect.

  Remove one of the memory modules if the computer has only 2 GB installed has no effect.

  Running CHKDSK finds no error, and has no effect.

  The attempt to start safe mode causes hang crcdisk.sys.

  Try a normal boot hangs at the screen loading w / loading scroll bar "stuttering".

  Startup Repair runs for hours with no results (I said to cancel after you let it run overnight only to find it still 'work' in the morning)

  Does anyone have suggestions more?

  Thanks in advance! : D

  Dell Media you are currently using may not have drivers appropriate for your PC.

  Contact Dell technical support (have your number of ready service if they ask for it) and ask for the "recovery media" to your specific model number. There may be a small fee involved.

  http://www.Dell.com/content/topics/global.aspx/services/en/dsc_home?c=us&l=en

  J W Stuart: http://www.pagestart.com

• Black screen with white cursor. Impossible to load Windows or even download a new copy

  I had Windows Vista on my computer and I got a virus. None of the antivirus working to clean the infected files and clips failed as well. So I decided to run repair system and it to halfway through, my office has crashed. I turned it our with the restoration of the vista disk and has no load. Then I attepmted to install a new copy of windows 7. It wouldn't load and I still get the black screen with the white cursor. I have therefore load Linux Mint and it seems that I can only have linuc on the computer. I deleted all lartitions because the partitions have been affected by the virus. Help, please. I need windows 7!

  Hello

  1. when exactly this problem?

  2 did you change on your computer?

  I suggest you remove any external devices.

  I also suggest you insert the DVD and try to install windows 7.

  I also suggest you to go BIOS and select CD/DVD boot as the option your priority and check.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I suggest you to follow the links and check out how to install windows 7.

  Installation and reinstallation of Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Installation of Windows 7: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/installing-Windows-7-frequently-asked-questions

• HP Pavilion laptop g6: black screen with white cursor, connect

  My laptop is a few years old and today after I log in, I get a black screen with a white cursor. I read a few threads on the forums and have tried to take the battery out and pressing the button for 30secs-2mins (tried twice). I can access everything ok in Mode safe, so made a malware bites scan & clean registry. No maleware was found and I rebooted, but always the same black screen when you connect in normal mode. I tried to access the Advanced tab in the BIOS to make the test hardware, but I do not have this tab. I'm out of ideas. Help, please

  B_S2

  Hello;
  
  Let me welcome you on the HP forums!
  
  As it works OK in safe mode, then it's SOMETHING that is loaded at startup which is screw up the display.  Could be a runtime program. could be drivers, might be a Service.

  No easy way to tell.

  Demarrer start in safe mode, type MSCONFIG in the start area.  When that opens, turn off ALL startup items. Reset.

  The PC now work, if one (or more) of these numbers - and you have to go through a tedious process of re-enabling them one at a time until the PC fails again.  The last of them that you re-activated was the problem.

  Here is a tutorial on how to do it: http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-windows/

  If the PC still does not work with all startup items disabled, then return to msconfig and click on the Services tab.  Check the hide services Ms.  Then turn off half superior Services.  Reset.

  If the problem is resolved, you will need to go through a tedious process of reactivating a Service at a time until you find the one that is the problem.

  If the problem is not resolved, turn off the other half of the services.  Repeat as above.

  No easy way to do...

  Good luck

• Problems with white text and transparency from Photoshop to Acrobat

  Hello Adobe community!

  What I do: I have a design that I created in Photoshop CC. This design has a transparent background. I try to save it as a PDF in photoshop, so I am able to open it in Adobe Acrobat Pro XI and print it on a color with only design showing paper

  Question: When I open the PDF file in Acrobat. I see only my white text and a light outline on the part of my design and still not all the rest of the design.

  Then when I print it on paper to color only the text appears (with a black stroke) on paper with my crop marks, I've done in the design of the PS. also when the text becomes transparent for some reason any (showing the color of the paper through the race), even if the text was put to white and the PDF presents the white text printed on colored paper

  Here are my steps:

  1. create Design

  2. save under...

  3. save - under Photoshop PDF

  4 [] as a copy, not controlled

  5. [check] layers, checked

  6 OK

  7. the General settings-

  Adobe PDF preset: [print high quality]

  Standard: no

  Compatibility: Acrobat 9/10 (PDF 1.7 +)

  Preserve Photoshop editing capabilities, verified

  Embed page thumbnails, Unchecked

  Optimize for fast web viewing, Checked

  View the PDF after registration, unchecked

  8 - compression

  Compression: None

  The rest of the settings are default.

  9. open a PDF of the file

  10. printing with the default settings

  11. look at my design massacred in the press

  12 frustration continues

  If for any reason any its like Acrobat of 'ignore' the white in my design? I'm so confused, and I've been at this for hours, through the forum post after post on the forum and it seems that I do everything correctly, but I get anywhere with it.

  I hope that I have added all of the necessary information, it's my first time posting here.

  Any ideas on what I am doing wrong? Would someone mind looking at the file? any help would be much appreciated.

  Note: also, I inverted the whole design makes all black instead of all white people. followed the exact same steps as above, and it printed perfectly. My confusion/frustration continues.

  You wrote:... also when printed on the paper of the color the text become transparent for some reason any (showing the color of the paper through the race), even if the text was put to white and the PDF document shows the text white .

  
  

  You cannot print white using an inkjet or laser because it is not white ink or toner in the printer.

  White was to come from your document that should be white.

  All the presses and printers use CMYK inks or toner.

  What is the definition of white? C = 0, M = 0, Y = 0, K = 0 so not a single of any ink drop is hoisted on paper in an area that is supposed to be white...

  Of course it will show the color of the paper in the areas where there is no ink.

  When you see something white that is printed on paper dark special white Opaque spot on an offset press using a color...

  (there is a model unique inket Epson which can print ink that appears to be white.)  The model is $ 7,000 by the way. ink [White] is $350, all other inks are only $90)

  On the Epson website:

  Ink Epson UltraChrome HDR white introduced an all-new organic hollow resin particle technology, forcing the fire to disperse randomly, producing the illusion of seeing white color.

  Note that even only claims Epson, it produces the illusion of white.

  The only way around this problem is to print on paper white and printed the "paper color" everywhere on paper that doesn't have your elements of design. ".

  
  

  
  

• Windows Vista Blue Screen of Death - what is a virus or malware?

  My computer automatically restarts on its own. It gives me a message "Windows closed unexpectedly". When I try to look for a solution on the internet on the computer it redirects me to a link. Every solution I see there as a hardware problem, but the way it is it seems to be a virus or malware. I ran Malwarebytes on it with no luck and rank just the sight of the blue screen NirSoft.

  My level of knowledge allows me to do some research, but it is not enough where I feel comfortable playing with files of material.
  Hello
  If you think your computer infected with the malware, try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide
  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.
  Brian

• F4280 printer test page print header "Windows printer test page" and nothing else underneath

  F4280

  The software solution center says printer is "ready".

  When I print the test page by pressing "cancel - start copy color", nothing is printed on the page. The page comes out blank.

  When I print the test page for the Control Panel, it prints the header 'Page of Test printer Windows' and nothing

  under the header.

  Hi, have you tried changing the black cartridge?