border of 1 inch on my gateway DX4300 desktop and I cannot get rid of it. I have a Dell ST2310 HDMI

Similar Questions

• Get a black border think around my page in adobe muse. How can I get rid of him?

  

  I don't have a container of sorts who must create this border. How to go further? It drives me crazy? He's going around my page

  Looks like you've applied a line on the page element. Click on the page and check the dash Panel.

  David

  http://creativemuse.co

• Gateway DX4300 - how to restore the drivers to the folder window.old.

  Hi, I just reformatted my PC. lost all my drivers and ask you how to restore the drivers to the folder window.old. My PC is a gateway dx4300 built in maps Ethernet and video. Unfortunately the gateway doesn't have these drivers.__Thanks.

  Oh, how it would help if truly comprehensive published Gateway of material form for a machine... :(

  I only am not surprised you found the driver for the modem didn't work - the only one I found was a Vista driver in proportion; Server 2 k 8 x 64 probably don't like that too much.  ;)
  But, a little research on Google (and, looking at the list of Vista drivers for this machine) does not give something useful: your card network (the thing you need more) seems to be a Marvell Yukon 88E8075 (possibly 88E8071) Gigabit NIC.  These drivers are available directly from Marvell: http://www.marvell.com/support.html
  Just select "88E8075" in the menu dropdown part number, then take the package Windows Server 2008 SP2 (x 64).  Install it, get the machine online, run Windows Update.  I am betting that WU will be able, at a minimum, give you work pilots 'real' (rather than the generic or non-existent drivers you have) so that you can sort.
  Honestly, I'm surprised that there is no drivers for this NETWORK adapter - it's a fairly common piece.

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• I'm running a gateway DX4300 while running the monitor loses signal, etc...

  I'm running a gateway DX4300 while running the monitor loses signal, switch / stop out no computer and computer will not respond unless you unplug the wall.  When you plug the computer into the fans turn on automatically but the computer will not start.

  Hi shermanproffitt,

  Check if the physical connections are connected correctly.

  Try the steps from the following links:

  Frequently asked Questions
  http://support.gateway.com/s/monitor/7005481/7005481faq2.shtml

  Desktop computer - no POST / no video
  http://support.gateway.com/s/checklists/BPC/ck2007050376.shtml

• Dell S2440L monitor shows a black border of 1 inch, with AMD Radeon HD 7500 graphics card

  He was allowed, when I used this monitor on my laptop via a VGA cable. but after that I connect to my desktop via HDMI, there is a black border of 1 inch. Please help how to solve this problem.
  Thank you

  Go here. Make sure that it is under 64-bit Windows 8.

  Two drivers for the Chipset. Restart the system when finished.

  Then return to this page and open the video and install our AMD WHQL driver. Restart the system when finished.

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• cannot get sound on computer laptop gateway

  I can't sound on my laptop its made by gateway that I have tried all the settings and nothing works

  Hello

  You get no sound in your laptop.

  1. What is the brand and model of your computer?

  2 have had any changes made to the computer before the show?

  Please follow the steps from the link and check that it works very well.

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• I got alltel for internet and had to get a craddlepoint router now since switching to ellementmobile I had to get a gateway router cdw530am mdl, but it won't work on my computer at home?

  I had alltell for my internet and had to get a craddelpoint router so I could use my home computer and laptop at the same time, but given that the switch to mobile really, I had to get a combo wifi broadband gateway mdl cdw530am, but now my home computer does not connect to the router , but the laptop with no promblem has anyone else had this problem?     any help would be greatly appreciatted!

  Install the drivers for your new device

  Good luck!

• My Gateway computer crashed after an indication there is a corrupted file and system restore disks must be used. We have never done their... What would be the way cheaper and easier to get this computer working?

  It started when my laptop was having problems (Vista 64 bt).  It's less than a month and the motherboard consumed.  If we use our Gateway desktop model that has Windows XP.  I found my laptop and tried to connect it to the radio.  Desktop just completely crashed.  He said there was a corrupt file and I should reinstall windows.  I'm disabed and I tried to read the instructions and use the F10 or F11 key but I couldn't do anything.  I entered the manual to find these virgins back up discs.  I bought a Dell, one month before and all disks are there... we had nothing to do.  I hate to admit that we did not open the manual.  I read that you can get the readers or the manufacturer's cd.  What is the best way.  I will have surgery soon and I can not contact with people because of my immune system for months.  I have a 14 year old who lives on the computer and take care of his Webkinz.  I have to fix this!   Thank you

  Contact Gateway to purchase recovery discs. It won't be cheap. MS - MVP - Elephant Boy computers - don't panic!

• I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I have a computer laptop gateway with vista and im stuck at "bootmgr is missing". and I can't even it at the command prompt, you know the c:? Help

  I can't get a secure boot or anything. are there secret shortcut keys or anything like that? !! ??

  Dear klh76

  You need a USB FLASH DRIVE, you can transfer the files from the Recovery Console Windows Vista from any other pc or laptop running Windows Vista, go to the backup and restore on the other computer and click on create a drive recovery system on the file menu. Once done, insert the usb key into the laptop, you want to fix, start by using selected peripheral USB device as MBR, follow these steps on screen, you can repair a corrupt Windows Vista it or restore to a previous restore point.

• How can I get rid of the black border around my screen?

  After an update, my screen resolution changed for no reason. Tried to change, but now I have a black border around my screen that I can't get rid of.

  Hello

  Windows Update will sometimes offer you updates of graphics drivers; NEVER accept them.

  Only go graphics drivers of your computer or the manufacturer of the graphics Web site map.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Here is the information on the Windows updates.

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

   

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Installed Windows 7 on gateway E4500 PC and now there is no Audio as well as does not recognize do not identify/2nd monitor

  Installed Windows 7, 32-bit on the new hard drive. Gateway PC E4500. Cannot get audio and does not identify/2nd monitor. Already used Windows XP. Works well when the drive with win XP is reinstalled. Is Windows 7 compatible with this PC?

  Original title: WINDOWS 7 installation, 2 numbers

  Hello

  There is a gateway E - 4500D and E-4500 s model.

  Enter the model number on the link:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  E - 4500D has been supported by the gateway and gateway provided drivers for Windows 2000 Pro and XP 32/64, Vista 32/64.

  E-4500 s is supported under XP 32/64 or vista 32/64

  No support or drivers for Windows 7 32 or 64 bit.

  You can try the Audio drivers for Vista; no warranty if.

  See you soon.

• Another gateway server desktop remotely in the RDP client file

  It is possible to specify another gateway server desktop remotely in the RDP client file?

  Thank you
  David

  Hello

  The question you posted would be better suited to the TechNet support forum. I suggest you to check with TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum

• My monitor has a space of approximately 1 inch wide on the left side of the screen. How can I get rid of him?

  The display on my screen leaves about an inch of black space on the left. The screen is filled all the way to the right. How can I get rid of the black space on the left of my screen.

  Thank you.

  If you're talking about a desktop computer, there will be buttons on the screen to make adjustments.  It's different depending on the brand and models so you will need to read your user name guide or tinker with it until you understand.

  Good luck.

• How can I leave an inch of 1/2 for high and low resident only?

  Hello

  I'm a bit new with Illustrator, but I created a picture for a contest. It should be 11 "and 22" wide. I have already created the chart, but later, I got the score I have to leave one inch half-space to the top and bottom only. What is the best way to do it without compromising the graphics?

  Thank you very much!

  a little advice

  Go to the window-> Transfrom

  in the height field, make sure that the reference Point is in the middle and Type:-1

  where-1 decrease the height of 1/2 inch of the top and bottom

  See the image below,

  

  hope this will help.