Branch 2 ports introduced "node of Feedback.

Hello

When connecting 2 ports LabVIEW requires Feedback node.

What could be a reason for this?

Thank you.

PS Code is huge, so I put just a fragment


Tags: NI Software

Similar Questions

  • Bytes to Port property node. When to use and when not?

    Hi all

    Ive frequently used bytes to port property node performing bed series and have not experienced any problems.  I've heard mixed on this subject reviews and I would like to know when to use and when not to use it.

    Thanks for any input.

    I will start by when it should not be used.

    When there are (as readable) ASCII data to come through and it is separated by a termination character.  Select the stop character and read more bytes than you ever expect a given message.

    When there are binary data, but a protocol where you know clearly how the message package is put in place.  In this case, you want to disable the stop character because any octet can be given legitimate and be interpreted as the stop character.  With these protocols, if you know the message is always X bytes, read X bytes.  If the message is of variable length, but the Protocol is set to tell you low for a long time the message is, and then make partial readings.  So if each message starts with 2 bytes that says follow X bytes.  Then read 2 bytes, which converted to a number, then read this number of bytes.

    When to use:

    The only time will really use bytes to the port is if you use a terminal of the installation type.  Just enter and display on-screen what never happens happened at the port since the last time it was read.  When you don't care where are message breaks.

    If you use bytes to the port and care message breaks, then you're obligated to all your new message concatenated to a string, you store in a shift register and each reading analysis through data to determine if you have a complete message and valid.  If you do not, do nothing and go back and read more.  In fact, you will need to run through the chain of data several times in a row before coming back to reread in the case where the message ever resulted in a single reading packets.

    The vast majority of applications falls into one of the above situations.  The last situation is not as common, and if you use bytes to the port with a system of e-mail that has defined a defined protocol or packages, you do a job more in programming to maintain a software buffer of data as well as the hardware buffer to the serial port.

  • Sub - VI with nodes of feedback used more than once inside a While loop

    All,

    I have a Subvi is a set of operations and using 3 feedback nodes. I use this Subvi inside a loop While 4 times in total. I noticed all instances used to share the same result in each node for your comments, but I would like to have an individual result of each of them. Is there an easy way to work around this problem? I find ways to avoid this: a) create a different vi for each time the Subvi has been used. (b) use global variables instead of feedback nodes. Is there an easier way to get around this problem?

    ExamplePlease note that the two sub - VI are the same) If on my first Subvi I calculate a maximum value and get 1.29 (then goes to the crux of feedback) on my second slot - VI 1.01 my feedback to the Subvi second node records still get the maximum value or 1.29. (and I want it to be 1.01!)

    Hope, that it is not too complicated, I was scratching my head with that for a while, can't find the "easy" button Thanks in advance.

    -Pop

    IM using 9.0.

    It would be useful to join the code. Anyway, I'm not sure how several knots of comments are supposed to work so I will defer to others to answer that. As far as being able to use separate or instances values if you are using a Subvi, you could mark it as reentrant. In this way, each call to it will behave as it were a copy of the VI and it will have its own memory space. This should include the feedback node. You end up with a single slot - VI and in reality a single node of feedback. If you need pass data between calls that simply data through wire. You can also use a motor of Action to store and retrieve values. An EA is MUCH better than a global variable.

  • feedback for sequences in LV8.2.1 nodes?

    Hello

    I used nodes of feedback with stacked sequences several times in the recent past, but these days, it doesn't seem to work...  I reinstalled some LV components lately, and I wonder if I've demoted from unintentionaly parts of LabView. There's feedback auto nodes into sequences included in LV8.2.1?

    Basically, I need to transfer data of 0 and 1 sequence in a stacked sequence sequence. I used to connect simply and a feedback node appears automatically. Now it gives me just a cut wire and complaints about the creation of a cycle. I tried to add the node of feedback manually, but it does not accept it. The 'Help' explains the methods exactly as I'd expect, but it just doesn't work...

    In addition, my older screw with nodes of comments always compile correctly (no error).

    No idea what can happen?  I guess I can use a sequence of flat, but I was really intending to use a sequence stacked to keep the block diagram small and sleek.

    Thank you

    Benoit

    Sequence inhabitants allows you to transfer data from one image to the other. I don't understand how you can use a feedback node. Need your VI or a picture.

    PS Sequence structures of any kind are rarely necessary and the use of a stacked sequence is considered by many to be very bad style. You should consider how to remove the structure of sequence all together and use data streams.

  • Read the Serial Port with termination Char?

    Hi, I have a particular piece of hardware that I'm communicating which sends a stop character 0xAh at the end of the data written to the port. I have trouble reading the data from the port where I only get half of the data due to synchronization problems. I know that it's related to be looking at the bytes to the port property node and read the bytes that probably replacing end setting tank. I have the correctly defined termination char, so, how did a survey for serial data to the port without using the bytes to the port method because I don't think that it works when you use the termination char port method. Anyone know this issue?

    Simple VI that explains what my main VI by defining the term tank and using the bytes to the method of port that is not working properly and causes problems of loss of data from mark is attached.

    Thank you.


  • Delay COM port, but it can read back data from MAX

    What short RX and RX directly, COM port can data from feedback on the test panel MAX, but still error display "time out What is the reason? Thank you.

    Hi Colin,

    When you read back the data, there is a parameter called "Bytes read" you need key, the default value is 1024, in this case, it will keep waiting for 1024 bytes until the timeout occur.

    I found a good article talk to this topic and you can change the bytes to be read in the test environment LabVIEW or MAX.

    http://digital.NI.com/public.nsf/allkb/874B379E24C0A0D686256FCF007A6EA0

    Let me know once try you it, thank you.

    Kind regards

    KwokHow

    AE OR Singapore

  • Error FPGA - object internally in pipeline not connected to the sufficient number of nodes comments

    Hi all

    I'm currently implementing LMS on module FPGA of myRIO 1900. I couldn't fully understand the following error.

    "Reading memory: internal pipeline object not connected to the sufficient number of nodes feedback"

    Details:

    "The selected object has a built-in shift register that makes the output on a particular loop iteration correspond to the entries in the previous iteration.

    Connect the outputs of the object directly to a minimum number of nodes of Feedback or uninitialized shift registers. You cannot connect the outputs to another object. "

    I just tried to access the values of two briefs and add them. The address for two memory values are the same, but the memories are different. I tried to implement this on SCTL, it doesn't but on normal everything in a loop, it works.

    Help me understand the error.

    Thank you.

    Post an excerpt of your code would help us to be more confident, but I think that you run in the error described in the second note of this help documentation.

    http://zone.NI.com/reference/en-XX/help/371599L-01/lvfpgaconcepts/fpga_memory_items/

    Using the parameters of memory default point that you have to attach a feedback with a x 2 node latency on the release of reading to use within a single cycle timed loop.

  • VRTX internal server ports

    I have the impression that I'm going to a painfully obvious answer here but how do I activate more ports for a server blade in a VRTX chassis?

    My two blades have 2 of the 4 active ports.  If I go into the port configuration in the/o GUI module, the other two ports show 'down', but there is no option to raise.

    This makes me think that each blade server would have a setting for how many NIC ports internally it uses, but I can't find such a setting anywhere in the graphical interface of chassis management.

    What Miss me?

    Hello

    wardog25
    I have the impression that I'm going to a painfully obvious answer here but how do I activate more ports for a server blade in a VRTX chassis?

    You can not activate more ports. You have only two available ports per node due to IOM/switch you use. The IO module will use only the first two ports on each node. You will need to move than the IOM to allow access to more ports. According to me, the IOM is the only available option that has this port restriction, but I haven't checked all the options available to make sure.

    Thank you

  • Identify the value of the property of the previous node

    I need calculate a value based on the value of a previous node. How to define 'ownership Params' accomplish deriving from this value. Read the previous node everything it's on position, his mother, leaf or branch, simple low previous node to the next node to the top node.

    Thank you.

    user3529875

    Just an info

    In addition, you have a problem, the solution of which the user provided before me is that the siblings will have the same value, if you add 1 to the value of the parent node will cause a parent can have as many children... so it will be difficult to sort out the basic level.

    Please correct me if I'm wrong

    Thank you

  • El Capitan USB question

    Hello Apple,

    Since the upgrade to 10.11 'el Capitan' several of my USB devices does not work properly, which up to now worked perfectly. To name only a few, these include the eBook reader Sony PRS - T3, AVR, ST-Link2 programmer, FT232 programmer (sometimes). In addition, VirtualBox and Parallels, which I use frequently, have questions calling for USB devices. Apparently I'm by far not the only one, as revealed by a quick search on the internet, for example

    Common to all these pages share the conclusion that the issue was introduced by Apple with 10.11 and that until this Apple support could not answer - at least in a useful way. And the advice to wait for the driver updates is not always an option for me the two for reasons of time or because support for example, PRS - T3 has been abandoned altogether.

    To sum up: there are a lot of people and equipment who have a problem of USB introduced El Capitan. The problem persists for some time now and there is no support by Apple, or at least a statement how they intend to solve. This is the shit!

    I'm a Mac user since the days of--oh, I don't know even the name of the model! And above all, I was very satisfied. But I must say that lately I wonder if that faithfulness is well spent. For me (and others) crucial things that worked perfectly before now fail and apparently Apple cares.

    Think again, Apple...

    A dissatisfied customer

    I have the same problem with USB: I have a cam action by Garmin, which had functioned normally before the El Capitan 10.11. No it was not acknowledged more. Using the DMESG command in the terminal, when the cam is connected to the USB port, I get this feedback:

    002223.783219 HS01@14100000: AppleUSB20XHCIPort::resetAndCreateDevice: unable to create the device, disabling port

    It really a mess and I don't understand WHY Apple has not solved this problem despite of El Capitan 10.11.03 was last updated. I really get off at Yosemite. But really I couldn't think that apple were so unprofessional!

  • How can I initialize a spelling?

    I have a program for the HP4192A.

    The program can draw XY, but the next plot will be based on the previous ones. So I have to close the program to delete the graphic.

    How can I add a button or switch to initialize the graph, so I don't have to close the program.

    Thank you very much.

    I cleaned the diagram on the EIS VI test.  It is easier to see what's happening this way.

    Comments on the program:

    1. do not the two wires on the connector a for a loop and connect a table via a terminal autoindexing.  Who has the smallest value will determine the number of times that the loop iterates.

    2. it is generally not a good practice to use the table build inside a loop, because it can cause frequent memory reallocations.  Best practice is to initialize the array to the maximum size, it will reach outside the loop and use replace a subset of table inside the loop.

    3 there is nothing wrong with the mixture of nodes and feedback shift registers in a loop, but this can be confusing someone watching the program later as to why. I prefer the register shift, but it's at least partly because I used LV long before that the crux of the feedback has been introduced.

    4. the high passage registry ends up with the same data that the table introduced in the loop of the sequence constructor screw is there a reason why you take it apart and back together again?  Similarly, it is not necessary use table of Index with the Index Entry linked to i, especially since you already got the same table autoindexing.

    5. I consider amending the measure VI HP4192 more far: eliminate feedback nodes and graphs because you perform these functions in the main VI.

    6 use the Negate, rather than multiply by-1.

    I can't save in version 7.1, so I've attached a picture of the block diagram with many of these changes.

    Lynn

  • How can I connect video recorder to Satellite P105-S6064 via tuner USB

    Can someone can guide me how can I connect the VCR to laptop model Satellite P105-S6064. Now I connected the TV via USB. Is it necessary that I have to redo my settings to view the VCR.

    The statement on the USB tuner is not unclear.
    I assumed that if I connect the VCR output via USB in component. I'm not able to view.

    Which USB TV tuner you use? Are there branches in port?

  • several results

    Hi all

    I have a question on how to account for multiple results. Here is my configuration:

    1. I have 2 test

    2. I would like to report the result of the test 1, test 2 and total of test1 + test2

    Please see my attached VI

    Thanks in advance,

    That would be because you need to start training.

    Training center of NOR

    NEITHER start-up

    -Hardware Basics

    -LabVEW databases

    -DAQ Application tutorials

    Introduction to LabVIEW for 3 hours

    Introduction to LabVIEW for 6 hours
    Paced self-study for students
    Self Paced Training beginner to advanced, required SSP
    LabVIEW training Wiki

    The fundamental problem is that there is no element of memory (Feedback node or shift register) to store the data of several [the course

    If you select 'Test 1' default data for 'Test 2' (a ZERO) came out of the first structure of matter.  Conversely if you select 'Test 2 '.

    A pair of nodes of feedback wired through the structure of the case are required to "Remember" the last value of test.

    Somethimg like this works much better

    home in 2011

  • I use the MODBUS library and can receive data, but I can send it very well?

    Hello

    I use the Modbus Library to communicate with a VFD to control a fan. I use the master write and read vi. I can write data to the drive mechanism and get the fan to do what I want. The VFD is supposed to send a package of confirmation after I told him to do something and I can also read its records. When debugging the VI it shows that the problem is that the buffer always reads zero and the VI timesout. If I look at the USB adapter lights to RS 485, I use to interface with the drive mechanism, I see that the flashes of light RX immediately after I send a message. So I should have something in the buffer. Does anyone have any suggestions?

    Aaron

    OK, here's what has happened to those who have this problem. In the series Receive.vi MB The bytes to the Port of property node has been reading 0 even if there was something in the buffer. Executing the program was then stuck in a loop until it expired and never went to read anything of serial port buffer. I didn't spend too much time wondering why that VI has not worked and created my own. Within a period appropriate after writing to the serial port, I used the same bytes to the Port property node and was able to get the exact number of bytes to the stream and then VISA vi the number of bytes to read. I received the message of the right answer and everything seemed good. But of course that NO! Then I experimented with different speeds of writing to the drive mechanism to get the fan to operate at different speeds. I found a small range of speeds where I get no response to the VFD, either in operation or by sending me a response packet. After a while, I found that there is a mistake in the LRC-8 code in the MODBUS library OR. It does not prescribe that the LRC will be a two-character value. So if your LRC is proving to be a single character such as F value (which should be 0F) you get an incomplete MODBUS message. This has been easily corrected in the vi LRC8 saying "number in hexadecimal string" vi to produce output with a minimum width of two. Then everything worked fine. Moral of the story, it's the MODBUS library is awkward.

  • Reset indicator

    Hi all. I tried to do a counter and it seems to work, but I can't do it to reset once the program is executed, it holds the previous value in memory. I tried to use variables, shift registers and property nodes, but I can't do everything. Can someone tell me what I need to do?

    Thank you

    Please, initialize the node of feedback. I think that would do the trick. Could you post the vi here please?

Maybe you are looking for