Brand new C309g connect not wireless enabled wireless security options

Similar Questions

• I bought a light Room 5 DVD format forget that my brand new laptop is not a dvd player

  I bought a light Room 5 DVD format forget that my brand new laptop is not a dvd player.  Any ideas how I can install it?

  Download the trial version on the Adobe site.

  https://www.Adobe.com/cfusion/TDRC/index.cfm?product=photoshop_lightroom

  Enter your serial number to license on your computer.

• Why a brand new laptop does not connect to my network from Apple?

  I have a network of Apple with an Apple Extreme router. I have two Apple laptops that connect to wifi without problem. But a new laptop with Vista unable to connect. My suspicion is that Windows is somehow blocking or interfering with the connection, because the Mac router is configured correctly. Any suggestion would be appreciated.

  Hello

  Follow this procedure to ensure that wireless you laptop works as it should.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• The new version of Firefox is to save my passwords even if it is not checked in the security option? In some cases, also to save my customer number? Nor is it necessary

  The new version of Firfox save my passwords and in some cases, my customer identification numbers, even if the passwords for this site "Remember" in the security option is not checked. I don't use a master password. There are no entries in the list "password saved" so I'm not able to remove supposedly saved passwords.

  To determine if one of your extensions could make logging in, could test you the page Firefox Safe Mode? It is a standard diagnostic tool to disable some advanced features of Firefox and extensions. More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe mode using either:

  • button "3-bar" menu > "?" button > restart with disabled modules
  • Help menu > restart with disabled modules

  Not all add-ons are disabled: Flash and other plugins still works

  After stops in Firefox, a small dialog box should appear. Click on 'Start mode safe' (not reset).

  Any difference?

• With explanations wireless security options

  Hello team,

  I would like to have your base of knowledge up-to-date with the types of security options available in IEEE and security options supported on the NETGEAR router with detailed description. The current article which is available on your KB Portal is bad enough. That's what I get when retrieved from the security options...

  http://KB.NETGEAR.com/app/answers/detail/A_ID/112/

  and

  http://KB.NETGEAR.com/app/answers/detail/A_ID/13205

  I would like to refine your article with all the security options available from WEP, WPA - PSK [TKIP], mixed, WPA2-PSK [AES] etc. I'm not sure if your knowledge base team consider my request or not. Even if they think it will I get any deducted after the publication of my article in your support portal.

  Thank you best regards &,.

  NetRags

  @NetRags I'm going to go ahead and pass on to management.

  Thank you!

• HP Photosmart C4780 connects not (wireless) on Mac or wireless network

  Sorry for the long post, but please someone help me!

  I bought my new printer a few days (actually 14th) and began to implement on my MacBook Pro with my Wi - Fi, which is routed through a Linksys router and mainly through my desktop computer (a PC with Windows XP). I used the CD that came with the printer to set it up on my Mac and it has set up the fine by USB, but when I try to set up the wireless, I get the following message:

  "Device not connected: to configure the network settings for the selected device, please connect via USB temporarily." The device can be disconnected from the USB once the network settings are transferred. »

  I reconnected and got the same message over and over again, so I decided to set up on my desktop computer instead. This does not work either and I got the same message on my desk I have on my laptop. Uninstalled on both computers, reinstalled and I STILL got the same message. At this point, I'm about to throw all the electronics in my bath tub and be done with them but on the contrary, I checked (and double checked - and triple checked) my router via my browser settings, fact that I know the SSID and the password and reconnected to the network through my laptop... Once again, the same message. I tried the network installation of push, the installation of the network PIN, I feel I have tried everything! Probably miss me something small, but eyes fresh is always an asset.

  Can someone help me? I printed a Test report of the network so that a Page Network Configuration and settings I received both... if need be, I can post the information from my router, in order to verify to implement, but after two days of trying to implement something that should have taken ten minutes (sometimes) I'm at my wits end.

  Network Test report:

  "Your HP printer cannot find your wireless router. Check our wireless router has power. Make sure that your network (SSID) HP printer name exactly matches your router (SSID) wireless network name. If they do not exactly match, run the installation of the wireless network to set up your HP printer. »

  How to change the network name of the printer to match?

  Summary of diagnosis:

  Wireless on: PASS

  Wireless work: PASS

  Find the network name (SSID): FAILURE

  Security: PASS

  The printer settings compatible with the wireless router settings: does not work

  No filtering: does not work

  Related: Does not work

  Signal strength: does not work

  Other networks detected matching your network name (SSID): does not work

  Detected wireless networks: 1

  Downlink Count: 0

  Channel: Does not work

  Although I was given my SSID (which does not match my home network - but how can I change this?) and my MAC address (I guess for the printer), so I didn't have the IP address of my printer has no way for me to get online to check all the settings! Is there another way to get this IP address?

  Summary of configuration:

  Communication mode: Infrastructure

  Authentication type: open

  Encryption: no

  ______________________________________________________________

  Network Setup page:

  General information:

  Network status: offline

  Type of connection: no

  URL to Web server integrated: http://0.0.0.0

  Firmware Version/Hostname/serial number were all given

  Admin password: not set

  802.11 wireless

  Hardware address (MAC): data

  Status: disconnected

  Port 9100

  Status: enabled

  mDNS

  Status: enabled

  Service name: Photosmart C4700 Series [6 last digits of my MAC address]

  SLP

  Status: enabled

  Microsoft Web Services

  WS discovery

  Status: enabled

  WS Print

  Status: enabled

  PC connected (s)

  Address IP/hostname: (nothing is here) Time since last access (mm: SS): (nothing is here)      

  Number of 802.11 networks discovered: 1

  (my correct information of wireless network is here, including the SSID, Mode (Infrastructure), BSSID, Channel, privacy (RSN), Auth (WPA - PSK), Encrypt (TKIP-AES), Signal and WPS (no))

  Help!

  Did you read this on your Verizon FIOS router? : http://h30434.www3.hp.com/t5/Printer-networking-and-wireless/Connection-problems-with-Verizon-FIOS-Actiontec-routers/td-p/892967

• Qosimo F20-137 will connect not wireless Orange livebox

  I connected to the internet via the livebox using the ethernet connection. But whenever I try to connect wirelessly with the livebox, it says it is not possible. I have the wireless power (on the front of the laptop), I have disabled the firewall as he claims that this could be the problem, still does not work! any help would be appreciated.

  Hello

  This box is not known to me, but I think that this problem is on your laptop. Please check if the wireless network adapter is correctly enabled using FN + F8 key combination.

• Changed a WPA encryption. Office connect not wireless, ethernet cable.

  Recently changed encryption wi - fi WEP to WPA, existing home wireless network. Change of wireless connectivity for laptop computer and printer is fine, but the Office will not connect wireless, ethernet cable.

  To your XP computer's wireless adapter supports WPA?  Many as these old maps that were made before that WPA has fully adopted as a protocol.  There are also various types of WPA, not all compatible with each other.

• Connection not wireless printer so can use wireless.

  PC is HP Elite e9150t, Windows 7, IE 8.  The printer is HP Photosmart 7960, Jan 2004, no wireless stuff.  If I connect HP Q6301A #B1H, wireless-G print server (small little design HP sells for $60), via the USB port on my printer I will be able to use this printer wireless?  Sounds too easy, right?

  If not, how to best use this printer wireless?

  Or do I have to plug the USB directly to my PC?

  PrintDoc, thanks for the reply and suggestion.  In my mind - just trying to get away at low cost.

  Phil

• Brand new Veer does not update the app Catalog or something else

  Hello

  Got a new at & t Veer (it was already unlocked), after have logged you in my existing profile, the phone came, but the App Catalog, has not been able to update itself as well as other applications.  Some of the suggestions in the forum to change the date to July 1 and force the update via the App Catalog, but it did not.  Clear and reset the phone, still didn't work.

  WEBosdoctor'ed the phone and it still has not installed the update (failed).

  Call in the experts to see if there are any other technique not too complicated to solve the problem.  WebOS is 2.1.2.

  I have seen one that required some hacking of level intermediate directories for reset the certificate, but a bit too risky for my basic skill level.

  Thank you!

  After scouring the forums looking for similar problems, I put on one track
  what I was living for:
  - http://forums.webosnation.com/hp-touchpad/325422-app-catalog-certificate-update-failed-2.html
  
  Thanks to the efforts of SideshowBob84, we have a solution to this problem.
  
  Despite the solution published HP to change the system date to 1 July 2013 and
  Download the update from the App catalog and install it, it still doesn't work.  It may have previously
  worked, as others have pointed out, however, since September, it appears something has
  changed and this solution is no longer valid.  Perhaps the server certificate has been
  compromised regarding WebOS and not corrected since.  HP may not be up-to-date
  of the problem.
  
  However clever mind in the WebOS community have a solution.
  
  When an update or installation of the App Catalog is requested, that a ".ipk" is downloaded.
  and then installed on your device, then the international prototype of the kilogram is deleted in your download folder.
  Very clean and hygienic when it works correctly.  When it's not as here all the
  evidence is erased, and we do not know what happened.
  
  GMMan, created a process and a patch that comes in the installation process and
  keeps ipk so that it can be installed by PreWare.  In this case, we want to download the
  Update Catalog App, but when he moved, we use PreWare to the action.  Times
  the update has been installed, you should be able to use the App Catalog without
  incident.  The following link leads to the solution of GMMan:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  Its a bit technical and a white knuckler couldn't for some.
  
  I'm not a neophyte, but I don't know where near technical competence are the guru.
  But I'll try and simplify the process in an easy to understand the document.  Before entering
  started, here is an inventory of the software solutions you need:
  
  Also when you download these solutions, remember to give what you can!
  These people put out there for the benefit of all.
  
  WebOSDoctor - this tool will reset your Veer to the conditions of the factory, he must get
  messed up.  An indispensable tool for any owner of WebOS.
  - http://www.webos-internals.org/wiki/WebOS_Doctor_Versions
  
  WebOSQuickInstall (WOSQI) - Gift of Jason Robitaille to the WebOS community for
  install PreWare, Homebrew applications and patches on WebOS devices.
  Absolutely essential and easy to use.
  - http://forums.webosnation.com/canuck-coding/274461-webos-quick-install-v4-5-0-a.html
  
  PreWare and Internalz Pro - Tools used for research of the ipk and patches loaded on
  a device.  PreWare will apply the patches on your device.  No need to download
  as WOSQI can find these ipk for you and install them.
  
  NODELETEIPK. PATCH - this patch when applied to your device will be downloaded
  the IPK is not deleted if they are properly installed.  Note: when this
  patch is applied all downloaded ipk is kept, you should not use Internalz Pro
  delete installed and no more need ipk.  A small price to pay to get your App
  Catalogue working again.
  A link to download NODELETEIPK. PATCH is found in this thread:
  - http://forums.webosnation.com/webos-tips-info-resources/322549-how-retain-app-ipks-app-catalog.html#post3378300
  
  Java 1.6 - minimum for WOSQI to work.
  In your search engine, search for 'Java 1.6' or 'Java 1.6 jre"to download Java
  the Oracle company.
  
  Your PC or laptop - WOSQI works on Windows, Linux and Mac.  I personally found
  that it does not work on PowerPC Mac, it's that you can't get Java 1.6 for these computers.
  And on PC Windows 8.1, I don't think that pilots Novacomd works on this version.
  
  -----------------------
  
  Now, the real work begins.
  
  1. install Java on your workstation.
  
  2. If your Veer is messed up, restore it back to factory using WebOSDoctor condition.  Good
  on screen instructions.
  
  3. launch your device and complete the activation and the Palm profile process.
  The AppCatalog update will fail, but it's OK, we'll fix it later.
  Once your device is running, put in Developer Mode.  To make this entry
  the Konami code on the home screen.
  Type the code as shown: "upupdowndownleftrightleftrightbastart". It's a bit geeky,
  but it works.
  Alternatively, you can type in, "webos20090606".
  You'll be put in the screen in developer mode, slide the switch to on to activate
  Developer mode.
  You can disable it later once you have applied the update to the App catalog,
  using the same codes.
  
  4. start WebOSQuickInstall (webosquickinstall.jar).
  
  5. attach your device to your workstation.  Once the workstation is aware of your
  device WOSQI will also recognize your device. You should see the name of
  your device in a drop-down list in the WOSQI.  Your device will also ask you
  If you want to connect with a USB device or charge your device.
  Select, load your device.
  
  6. There will be an icon on the right side of the WOSQI window that looks to the world
  attached to a hose.  Click on this icon and it will open a new window with
  several tabs.  Click the Applications tab if it is not already active.
  Search for Preware and Internalz Pro.  Install these two ipks.
  When these ipks are being installed, it might want to install other required
  packages.  Allow installation of other packages.  Once completed,
  Close the window and you will be current with the main window.
  
  7. now, look for an icon to sign more.  Click on it and it will open a finder window.
  Locate the NODELETEIPK. PATCH file that you downloaded previously.
  Let WOSQI install and apply the patch.  After that WOSQI applied the patch,
  the sheer can restarted.  YMMV.
  Then, for the update, set the date of your system on July 1, 2013
  via the application Date and hour.
  
  8. you are now finished with the steps in the workstation.  Remember to well to eject the
  device before you disconnect it from the computer.
  
  9. When you look at the menu of your device, you should see PreWare and Internalz Pro.
  
  10. then open the App Catalog.  Search for 'App Catalog Update.  Install the
  Update. It will probably fail, and it's OK.
  
  11. open Internalz Pro and navigate to the following folder location,.
  / Media/Internal/downloads.  You will probably see a called ipk,
  com Palm.app.appcatalogupdate_2.0.0.IPK.  Open the ipk.
  When you open this ipk, it automatically calls Preware
  to install the ipk.  When this is done, the App Catalog should be
  fully functional.  A restart of the swing may be required.
  
  12. reset the date system is automatic.  You should now be able to download
  the App Catalog programs.
  
  13. Notes, with the patch in place, you need to occasionally clean the download
  folder for managing storage.
  
  14. you're now back to a functional State of WebOS!
  
  15. you can uninstall the NODELETEIPK. Your device to help PATCH
  WOSQI, using tool/Device Management.  I had not done that, so if you are
  success, let us know!

• Brand new AspireSwitch10 power not on. No LED light. He once worked in the wall outlet. Any difficulty?

  Unpacked new device plugged into the wall during the night to recharge, but unable to see the light as notes Quick Guide to LED. While it is plugged into the wall, I was able to run the installation program and start downloading Office 365. Don't know if this one ends as the screen went black. Cannot restart. Does anyone know how to revive a dead device? If there is no suggestion, I'll try to replace the power cord.

  Try a long press of the key power + volume down, it will get into the bios, press F10, save and exit. then it will restart Windows.

  Furthermore, no during charging led light isn't a good thing, don't forget that you have completely plugged taking it works 10.

• Brand new laptop does not come with disks of windows, I need to reinstall windows what/where/how do I?

  I bought 2 new laptops. Both come with Windows already... so, if I need to reinstall windows... How/where/can do?

  Hello

  For future reference, these are VISTA forums you want on the new laptops in.

  I suggest other questions about these laptops you ask in the correct Forums.

  Here are the General options of relocation for you:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  See you soon.

• Brand new battery does not charge

  I just bought a new for my Toshiba satellite laptop after installing computer and plugged in, battery display icon battery 50% and not charging.  What's happening please? I need help.

  This can help. I would also contact Toshiba support.

  http://forums.Toshiba.com/T5/Satellite-Pro-laptops/battery-plugged-in-not-charging/TD-p/291593

  http://support.Toshiba.com/support/viewContentDetail?ContentId=4004523

• my brand new ink & Slide not working properly

  Drag any with my iPad Mini 4 (always last beta 9.3, developer)

  So, my Slide is not connected it who so ever, even if it is defined by me to be 'connected' in every crazy app: 3

  When I try turning, while on the screen, or put it on its side (always on-screen), sometimes the slideshow menu appears; but mostly he just making iPad go completely crazy and apps I have in the background keeping random switching!

  as for my ink: it works, but the connection timeout is HORRIBLE most of the time. The line seems far from the tip, and it seems to depend on how I actually manage my physics "pen", which is absurd! If I, for example, turn in my fingers around, she either doesn't answer properly or the line moves around the edge at random (?). and the lines are somewhat randomly, sometimes even when I don't do it for most! ... and outside drawing, my ink appear to ignore especially ICONS in every app I've tried. I need to use my hands for icons.

  HELP, I'm spread word about this instantly, I bought it for my Nail Polish at home, the United States and paid ~ $70 for it. I'm not back.

  see you soon love you Adobe

  another note, I've given under another thread on this forum:

  iPad Mini 4, same question with nine slide! no more line and it does NOT work with any app, I tried. More my ink is horrible to catch the connection well, it doesn't work all the time, but the lines are sometimes RANDOM and the lag is horrible. In addition, he sometimes didn't INTERCEPT on me when I try to click on something al all, and this happens ONLY in your applications!

  as for my slide without work, I mean: when I try to flip around on the screen he sometimes catches connection on a slot of dry just to make my crazy iPad and usually switch to a random application of my iOS app selector. and generally, it does not at all! It's so frustrating, I chose your stylus ESPECIALLY because I wanted to slide.

  PLS ANSWER! I write this everywhere, from Facebook to Google + guys. This entire thread. because I bought at your store online, the United States, in Poland, EU; and paid MORE than $70. see you soon

  Hello again,

  It's just a theory, but it is possible to this slide has problems with the mini iPad because of the smaller area available for the slide. That being said, I am not aware of the official compatibility with this model of iPad issues. If the problem persists, please contact Adonit where they provide support for this hardware: [email protected]

  Thank you!

  -Kathleen

• Error: "connection process failed create the security options dialog" during the backup of the computer

  After the full backup PC has been running and has reached about 40% computer gradually crashes with programs "not responding". CTRL-Alt-Del does not produce error described. This option is a hard stop. Powered PC brings back to life and working in all other respects. 'Normal' backup works ok. Suggestions? Thank you very much.

  Hello andyv12,

  Look at the solution of another post with the same number and the error message.
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/719b3123-DE05-4535-9f9a-9dee121a0adb

  If please reply back and let us know if the solution helped to solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think