Brand new WUSB6300 can't see 5 GHz band - defective?

Similar Questions

• IdeaPad Yoga 13 can't see 5 GHz network

  Hi all

  Just got the machine from Bestbuy today, love so far except that Yoga can not see my network 5 GHz on the wireless networks list. I can connect next to 2.4 Ghz without problem.

  I have Asus router providing two SSID - 2.4 Ghz and 5 GHz, my X 220, Samsung phone, iPad is not any problem connect to one of them - excpet the 13 yoga.

  I tried to download and run the Realtek driver on the Lenovo support site and still can't see 5 GHz network.

  Does anyone have the same problem?

  Thank you

  
  

• Mac OSX 10.8.4 can't see 5 GHz Linksys EA6500 wireless network

  Hello

  We have an EA6500 of Linksys router work of office. I found that Macs can't see 5 GHz network quite often but can almost always see the 2.4 Ghz network. If I restart the Mac then it can sometimes see the 5 GHz network but it's far from being reliable in trying to connect.

  Once all connected works correctly, it's just the operating system to display a list of network. If I same boot Mac in Windows 8 he can see the 5 GHz Wireless reliable every time.

  The office is in a shared office space, and there are many visible wireless in the room, about 12 now.

  I have the latest firmware of the router Linksys EA6500 (1.1.28.147876) and all software updates on Mac OSX. I fiddled with the network of automotive channels, to the setting of specific channels that seemed empty when I used a phone Android to see how busy they were.

  Has anyone seen or had any sort of resolution?

  When I get home, I have the same router and my Mac connect reliably, 100% of the time on the 5 GHz network.

  Well, I got to the low fo this. My steps, in case someone knocks something similar were:

  1. start of Fedora Core 19 Linux on my Macbook Air

  2 tries to connect to various networks near me, even if I didn't have the key

  3. notes that dmesg responded with 'country setting code' and then run dmesg and grep'd for the game of country codes

  4. after hitting one of the wireless networks, I noticed he would lie TW country code

  5. wireless network was not protected and so that a scan of the network, when her and found some web interfaces

  6. connected to the interface web and found it was a VCR Panasonic connect you

  7. once I had the wireless network manager I walked around the building with my iPhone looking force wireless looking where he was stronger.

  8. since I found that the reception office was where he was

  9. the person at the front desk denied that they had any router or wireless, it

  10. they opened a closet that had, a TV Panasonic inside recorder!

  11 identified the router right next to him.

  12A obtained in the region of router has changed for US

  Mac connect now to 5 Ghz EA6500 reliable, every time.

• Brand new EA4500 - no strip of 5 GHz after several reboots?

  Hello

  I set up my new EA4500 last night and set up the bands 5 GHz and 2.4 Ghz with separate SSID (as recommended). While I can see the 2.4 Ghz band with all my devices, I don't see the band 5 GHz with any of them.

  I followed the advice given (including the display settings) on the EA4500 FAQ:

  Title: Customization and connection to the 5 GHz band wireless on a Linksys Wireless-N Router
  Article ID: 21466

  The references to the article that "If your wireless 5 GHz network is not listed, try to unplug the power cord from your router and then reconnect it after 10 seconds."

  Do that * many * times and still nothing. I have a capable dual-band adapter Netgear RangeMax WNDA3100 Dual Band Wireless-N adapter, I know works on 5 GHz (because I had to work on my old WDNR3700v1 dual-band). Similarly, I have PC seated less than 20 feet away who have previously been able to see the band 5 GHz on my old router, but are now unable to see it on the EA4500.

  Is this a known issue? There is no update available firmware, so I am at a loss. Hate to have to return after a day...

  Thank you
  -Bn

  Try to configure a unique SSID on the 5 GHz, without wire - only band. no security, choose a lower channel (36-48). Make sure that the SSID broadcast is turned on.

  If you still don't see not the band 5 GHz SSID on any of your devices Band 5 GHz, I would say that the EA4500 is faulty...

• Dell XPS 13 (2015) can't see 5 GHz network

  Hello

  I have the new laptop XPS of 13 2015 with Broadcom 802.11ac configuration. I am unable to see my WiFi 5 GHz network and can connect only to the 2.4 Ghz band. My router is the Asus RT-N66U. Is there a solution?

  SAL

  I had the same problem.

  If you uninstall the wireless card in Device Manager (select the option to also delete the driver) and then check for changes on the hardware, Windows uses its own built the pilot who can see 5 GHz networks.  It seems that the driver from the Dell Web site is borked.

  My concern is that this driver is not updated, so I would like to know where to get more drivers for this device.

• Brand new T440s with BIOS password

  Hello

  I have a big problem.

  I bought online a new T440s I opened the box for the first time myself. When I go into the BIOS it asks for password and I just hit enter without entering a password. I can get into BIOS but I can't change any settings.

  What can I do? A brand new thinkpad can come with a BIOS password on the box?

  I get conflicting information regarding the type of password. First image said his power over who can be removed but bios says his supervisor.

  

  

  In fact, it can happen. Sometimes large customers require laptops preconfigured which may include customized supervisor passwords. Of course, you should have not received one of these units. Ask the seller for a replacement unit, there is no easy way to remove an unknown supervisor password without replacing the motherboard for the laptop.

• I don't see that I speak when I have FaceTime, but they can see me. Brand new 6th generation iOS 9.3

  I have a brand new iPod touch 6th generation. When I FaceTime, I don't see who I am talk - have just a black screen. But they can see me. And we hear the other just 9.3 fine.ios

  Test and test

  Force reboot

  http://support.Apple.com/en-us/HT201559

• New Portege Z10T can't see Sierra / 4G card after 8.1 Upgrade Win

  Hi all

  I bought a brand new Toshiba Z10T Core i5 00 M 001 model of Telstra last night. When I got there, he had a connection "Telstra" related to the internal 4 GB card. This has been tested and work on standard 8 Windows Installer as expected from the GET.

  I proceeded to run Windows update on the stock Win8 installed, who installed about 900 MB, updates. As a result, I have installed the recommended Windows 8.1 update. Once it was over, the laptop has rebooted a few times, and as one of the last steps he wanted to connect to the internet to complete its configuration (I presume download my profile of Microsoft) at this POINT, I had available to me 'Telstra' connection and I used this link to download the profile (she even smsed me a confirmation code).

  As a result, however, the 'Telstra' connection disappeared, and the Sierra Wireless card is now not found on the device. I tried to connect to a wireless network and running Windows Update (I'm updating) and your Web site is not a specific driver available for the wireless on Windows 8.1

  Can you please suggest how can I do to get the 4g on the unit connection working again. It's one of the reasons why I invested in this pivot Tablet and I do not want to go back to Windows 8.

  See you soon,.
  Josh

  Thanks for sharing this info!

• HP Pavilion dv6t - 6 c 00 laptop can't see the connection of 5 GHz.

  Hello, I just got a router dual-band Time Warner Cable I want to connect wirelessly with my HP Pavilion dv6t - 6 c 00 CTO Quad Edition Entertainment Notebook PC I've had for 2 years and a half now. The laptop has no trouble to see and connect to the 2.4 Ghz band, but has not yet seen the 5 GHz. I tried to play with the settings of the router, but had no luck so far. I think he should be able to see it, but I'm not 100% sure.
  Anyone know if I need to update my drivers or anything for it, so you can connect to 5G? Or maybe buy a new card network or adapter? Or I'm offline at 5 G lucky?
  All comments, suggestions, ideas, would be greatly appreciated!
  Thank you

  -T7K

  You are the very welcome.

  Yes, you are on point.

  If the card is a dual-band card, you would see the suffix abgn or agn

  Unfortunately, the Realtek card in your laptop computer is a single band card as evidenced by the bgn suffix and only works on the 2.4 GHz band.

• Windows Explorer crashes on me for no apparent reason. Can I solve this without restoring my laptop brand new factory settings?

  Yesterday I bought a new PC laptop Asus X53U and a few hours to get home, Windows Explorer has started to randomly crash. This happens whenever I try to browse the files on my computer using Windows Explorer. The original error report (from 14:50 26/12/2011) is as follows:

  Description

  Application of vulnerabilities path: C:\Windows\explorer.exe

  
  

  Signature of the problem

  Problem event name: APPCRASH

  Application name: Explorer.EXE

  Application version: 6.1.7601.17514

  Application timestamp: 4ce7a144

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c8f9

  Exception code: c0000005

  Exception Offset: d 00000000000532 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 2057

  Information additional 1:9227

  More information 2: 9227af1e56b2326cc34fd252f87d48f5

  3 more information: c05e

  Additional information 4: c05eab96ec5c3a8ddc29336ac9c795e2

  
  

  Additional information about the problem

  Bucket ID: 25714140
  The most recent accident occurred at 16:04 today. The error of this crash report is as follows:
  Description

  Stopped working

  Application of vulnerabilities path: C:\Windows\explorer.exe

  
  

  Signature of the problem

  Problem event name: APPCRASH

  Application name: explorer.exe

  Application version: 6.1.7601.17567

  Application timestamp: 4d672ee4

  Fault Module name: ntdll.dll

  Fault Module Version: 6.1.7601.17514

  Timestamp of Module error: 4ce7c8f9

  Exception code: c0000005

  Exception Offset: d 00000000000532 0

  OS version: 6.1.7601.2.1.0.768.3

  Locale ID: 2057

  
  

  Additional information about the problem

  Bucket ID: 32430540
  I would really rather a solution that does not perform a recovery of the system, but at this early stage in the life of my laptop BRAND NEW, I'm willing to try anything.
  See you soon.
  EDIT: maybe I should mention that this accident occurred 21 times between 16:05 and 14:50 yesterday today!

  My apologies if you have already seen this, but have you seen the 'sticky' - http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-explorer-has-stopped-working/6ab02526-5071-4dcc-895f-d90202bad8b3

  If all goes well she can help him, but if not, I'm sure that the expert will be "smart".

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that?  Can I use an adapter?  If yes should which adapter I?

  I have an old Mac Mini with a DVI Port that came with a VGA DVI-adapter.  Tonight, my monitor went down.  Brand new monitor works with that? Any recommendations? Can I use an adapter?  If yes should which adapter I?

  You can use any DVI monitor DVI port directly or have any VGA monitor with the power that you adapter. A HDMI monitor might work with an adapter DVI to HDMI in a pinch, but HDMI tends to be more fickle.

• How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  How can I get my serial number or IEMI number for me to make an appointment at a genius bar or get help online when my iPhone brand new completely deserted?

  The IMEI number is printed on the back of the phone, unless it's an iPhone 6. You can also find the serial number by eject the tray of the SIM card on the right side of the phone (insert a paper clip or similar object into the hole). It is in very small print at the bottom of the status bar.

  It should also be in the box the iPhone provided in if you bought Apple or an authorized dealer.

• Can't see the new external hard drive connected to my iMac for my MacBook?

  Hi all

  I connected a new 8 TB external Seagate HD to my iMac and I try to see it from my MacBook Air and MacBook to my partner.

  It is properly formatted (journaled MacOS and GUID) and have not had any problems with the 3 TB drive, that we were connected before.

  File sharing on and everything seems normal.

  For the life of me, I can't drive/partitions from the MacBook, although he is able to see the old drive.

  Any help appreciated.

  Thank you

  Hey Dr.Tobyk,

  Not being not able to see a new disk on your network, when you can still see the old drive would make me crazy. I use sharing like this every day and you know how convenient it can be.

  I always look at how a new drive to share implementation is always How to connect with the file sharing on your Mac this article helps me to solve the problems which arise.

  Things I always look how implementation of a new drive, that it is in the list of shared folders and check that user boxes has the correct user with the correct access.

  See you soon

• How to see the tabs in Aurora (app windows 8)? I can't see it for oppening a new tab. But if I want to change tab, I can't see them.

  I install Firefox Aurora because it supports windows 8 style app. In the windows form 8, the tab is hidden, but I think it's a good style. But I don't see any possibility to see them when I want to. I can just see them when I open a new window. Select the "open in new window" option, it shows just the tab bar that isn't like the original version of Firefox. And also the search engine here is bing.com . How to change.

  Hello, it should be possible to get on the tabs and the address bar with touch gestures as in other metro applications: drag from the edge top or bottom of the screen. - you can also press windows-key + z or right click somewhere on a page...
  
  http://Windows.Microsoft.com/en-us/Windows-8/getting-around-tutorial

  You can set the preferred through the charms bar search engine (by sliding in from the right or pressing windows-key + c) > settings > search...