BRAVO: Wifi connects but can't reach Internet

Just recently my Wifi stopped working properly, anywhere except for home. The phone displays an active Wifi connection, but I can't get anywhere. It still works fine on my Wifi at home. I did not any changes to settings and it is always set to use DHCP to get an IP dynamic task. I tried to have the phone "forget" a network and it relearn, but which did not help. Any suggestions?

Thank you - dcedte

Deletion (aka. "forgetting") the unsecured Wifi networks 'remember' solves the problem. When the phone connects again to these networks, it works now.

dcedte

Tags: Motorola Phones

Similar Questions

  • WiFi connected but unknown network and internet access

    Hello

    I think I've read enough forums and done enough research I finally post my question. My other laptop is Dell Inspiron 1545. It connects to my home network, but says unknown network and no internet access. I tried wifi and ethernet cable. The IP address is set to auto detect, I have reset the router, reinstalled the drivers for the card wifi, without success. Any ideas?

    -Taylor

    Only, I solved this problem on my Dell XPS, so I decided to share with the community.

    After the call to Dell and discover my warranty had expired (a little more than one year) and knowledge it would cost me $129 to get a response from time, I decided to go look for solutions. I found a thread of 2009, attributing the cause to a thing of access network Mcaffee. I knew that's the question because I don't personally like the major anti virus makes (they tend to pull up of stunts like this) so I had ripped my PC McAfee, as soon as I started. But this thread has helped me understand how to solve this problem.

    The problem seems to be an Agent of network access Protection on your system configuration (your start up programs). Make sure it is off. It wouldn't hurt also to try to disable the Internet Explorer ETW Collector Service (has a name shady so I nuked it too: P). this fixed my connection problem not identified immediately.

    Follow these steps (Windows 7):

    1. click on start.

    2. click on search at the bottom bar.

    3. type: msconfig

    4. press enter

    5. you should have a new window named System Configuration

    6. click on the Services tab.

    7. scroll down until you find: Network Access Protection Agent. It will be defined as stopped. It's normal.

    8. uncheck the box next to the network access Protection Agent.

    9. click on OK.

    10. restart your computer.

    Your internet connection should work now. If this is not the case, repeat the procedure until step 6, and then follow these steps:

    1. scroll down until you find: Internet Explorer collector Service to ETW. It will be defined as stopped. It's normal.

    2 uncheck Internet Explorer collector Service to ETW.

    3. click on OK.

    4 restart your computer.

    If these two steps don't fix your problem, go back to the Configuration of the system (Services tab) and it look for any other Network Access Protection Agent, such as Macafee named ones or something similar. Please be aware that uncheck essential services can cause pc problems, so make sure you know what you're unchecking before you do. If in doubt, feel free to google it.

    Another solution would be to temporarily disable your antivirus and firewall and see if that helps. If Yes, then you know where you need to focus.

    Good luck and hope it works!

  • Lenovo K4 Note: WiFi connected but cannot access the internet.

    Hello

    Just a little while back, suddenly, my phone is connected to WiFi, but could not access the net, although the WiFi worked very well. I restarted the phone and then he couldn't even connect to the registered WiFi. I deleted the data and reconnects with password, still unable to connect. Deleted data from WLANBindingLocation and plugged in, he connected on WiFi but not Internet access again. Remove password and then reconnected and then it started working.

    Important: before that happened, I had opened the game "In The Dead". He started, but then became unresponsive. The phone hang well. The game became unresponsive. That's happened three times. And then it's the WiFi thing.

    VERY IMPORTANT: now I am train to check the system settings updates-> phone-> system update and it is to show "the failure of the network connection. Please try again. Although I'm always connected to the Internet and it works. I write this from my phone. »

    What the devil. It is a new phone. And I was so impressed by the latter. And now this? Give me a solution. NOW!

    OTA server is down, the team is fixing now.

  • HotSpot WiFi connection but does not share internet connection

    Hi all
    I have a Sony Xperia Z2 running version 4.4.4.

    The problem is that when I create my wifi hotspot to connect my computer, with the network will be created, but no internet is available via the connection. I tried to connect several devices to my hotspot of phones, and none of them are able to access the internet.

    I updated lately and I think that is where the problem comes from. Any help on the matter would be great.

    Thanks in advance.
    LINC

    AFN Telstra.wap is incorrect. You will need to make a new following.

    Press the sign beside APN + and enter the details below.

    Name: Telstra Internet

    APN: telstra.internet

    Once these areas are filled simply save and use the camera instead.

    Let me know how you go.

  • computers shows no internet connection but can access the internet

    Lately, my internet has been slow. Also, I had problems to connect to some sites to download some updates and product registration. I'd get a message that there is no internet connection detected. That's when I noticed that the network icon would increase from 2 computers with a blue dot on them to just 2 computers. I checked my "network and sharing Center" and it showed that I am not connected to the internet (red x on the line between the network and internet connection)... I can still access the internet and navigate well. When I tried to diagnose and repair, I get this message.

    "You need to register with the provider of internet services of this network to have access to the internet" and below "connections to Web pages are currently redirected to a different Web page"

    "Click to open the Web page, if it is an Internet service provider registration page you can read the registration information."

    When I clicked and it took me to http://www.microsoft.com/en/us/default.aspx.

    I turned my modem and the new, and it seems to connect again. I just started experiencing this recently (in the last week).  Can someone help me solve this problem?

    He seemed to have solved the problem. I went into the Device Manager and disabled my network card and enabled then again. I'm also done to restore my system to the rear before the problem started then uninstalled and reinstalled NIS2011. I have not reinstalled IE9 yet. Thanks for the help

  • WRT54GS connected but can't find internet

    Hi I have a wag200g modem witch I connet via cable with a wrt54gs and I connet my laptop wireless with wrt54gs. I have tested several parameter but the internet cannot be found. Is there a framework are what I should do?

    Then, you try to WRT54G cascading on the WAG200G router... Check out this link for both the router cascaded together.

  • WiFi connected but browsers and mail stop working

    Here's the situation:

    iMac, 4 years, OS X 10.7.5

    WiFi connected but, browsers and mail stop working sometimes recently.

    Checked the wifi & browser settings.

    Do not remember something like what happens when connected online cat5.

    Curious to know what is happening.

    Say local store card is perhaps go wrong.

    The machine is only 8 ' of router.

    Another pc on the network does not appear to be a problem.

    Any help appreciated.

    You can connect an Ethernet cable to see if it works on Ethernet when you encounter problems easily?

    Try to use your own DNS server.  Because if the DNS server that you use currently is not translate www.company.com name to IP address nn.nn.nn.nn, it will look like you do not have internet access.

    System Preferences-> network-> advanced-> DNS-> [+]

    OpenDNS.org

    208.67.222.222

    208.67.220.220

    Google DNS

    8.8.8.8

    8.8.4.4

    You can remove them later if you want using the [---] button.

    If this does not work, it could mean that your router is having problems.  Most routers act as the local DNS server, make a cache and especially fair bet as a DNS server provided a front for the access provider.  If the router begins to act, it can often be cleared by power cycling the router.

    And once again, if you provide your own DNS server works, then it could be DNS servers of the ISP, but less likely that they would be getting a lot of complaints from their customers (assuming that customers thought it was DNS servers).

    You know, there are 2 sides to any path of communications.

    If it is technically possible for radio Wi - Fi of the iMac to fail, it's actually not very common.

  • My computer connects to my wireless connection but it say no Internet access

    Original title: my computer connects to my wireless connection but it say no Internet access

    I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

    I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

    Hello

    1 did you do changes on the computer before the show?

    2. What is the exact error message you get?

    3. What is brand and model computer?

    Method 1: Turn off the antivirus

    See the following site:

    Disable the anti-virus software

    http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

    Method 2:

    Follow the troubleshooting steps in the site mentioned below:

    Windows wireless and wired network connection problems

    http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.

     

  • My wireless connection status shows that I am connected but I did "no internet access.

    Original title: internet connected but shows "no internet access" why?

    I have a gateway laptop and everything suddenly I can't access the internet.  My wireless connections shows that I am connected but I did "no internet access?  I tried to disconnect and reconnect, but that has not worked.  I tried troubleshooting and it says there is a problem connecting with my modem, but it is impossible because all other computers cell phones/Ipod work correctly on the same connection.  Can anyone help?

    Renee

    Hello

    You did changes to the computer before the show?

    I suggest you follow these methods and check.

    Method 1: Remove all the wireless networks, listed in the network and sharing Center.

    1. click Start and select Control Panel.

    2. open the network and sharing Center.

    3. click on manage wireless networks.

    4 remove all wireless network listed in this list.

    5 restart the computer.

    Select your wireless network and connect (if course, enter your password). Check if you see exclamation of yellow color on the bar strength wireless connection.

    If the method above does not work, proceed to the next method.

    Method 2: I suggest you try the steps from the following link.

    Wi - Fi and in Windows network connection issues.
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    If the method above does not work, proceed to the next method.

     
    Method 3: Reset the TCP/IP stack.
    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself: http://support.microsoft.com/kb/299357 .
    If the same problem still persists, then try the next method.

    Method 4: Perform the steps from the link to set up a new wireless connection.

    http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

    I hope this helps!

  • Trying to transfer CS6 serial key of new computers but can't reach signout of old computer because it's broken

    Hello

    I try to transfer CS6 serial key new computers but can not reach signout of old computers, because he's broke.

    CS6 is installed on two different computers and two of them are now broken.

    Now I need your help to disable the keys to series on other computers.

    I can't access the deactivation on my profile page too

    Help, please.

    Contact me my email address registered on the account: [email removed by Moderator]

    Thank you

    To disable the inaccessible facilities, you should contact the Adobe Support via chat and ask them to reset your activations.

    Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

    Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

    Serial number and activation support (non - CC) chat

    https://helpx.Adobe.com/contact.html?step=PHSP-PHXS_downloading-installing-setting-up_lice nsing-activation_stillNeedHelp

  • WRT1200ac and WRT1900ac OPENVPN can connect but can not see the network

    I can connect but can not see the computers on the network. I've tried everything. Any help would be great. Thank you

    Firewalls are disabled on remote computers?

  • Cisco vpn client to connect but can not access to the internal network

    Hi all

    I have a VPN configured on cisco 5540. My vpn was working fine, but suddenly there is a question that the cisco vpn client to connect but can not access to the internal network

    Any help would be much appreciated.

    Hi Samir,

    I suggest that you go to the ASA and check the configuration to make sure that it complies with the requirements according to the reference below link:

    http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00805734ae.shtml

    (The link above includes split tunneling, but this is just an option.

    Please paste the output of "sh cry ipsec his" here so that we can check if phase 2 is properly trained. I would say as you go to IPSEC vpn client on your PC and check increment in packets sent and received in the window 'status '.

    Let me know if this can help,

    See you soon,.

    Christian V

  • I created a vpn connection, but can I create a shortcut to connect every time?

    I created a vpn connection, but can I create a shortcut to connect every time?

    I created a vpn connection, but can I create a shortcut to connect every time?

    Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.

  • No Internet connection, but can send and receive e-mails.

    Original title: WiFi connection, mail received and not sent, no internet.

    I have an Acer Aspire with windows v5 8. It says it is connected to wifi, but when I'm on internet explorer or google chrome it says that there is no connection. I tried to reset my router, but there was no change. The same problem occurred when I am connected to a three other routers. However, I can still send and receive e-mail? It wont let me put far to 8,1...

    Tiffani

    If a firewall or a malware application blocks maybe port that use browsers.  Try turning it off to see if the problem persists.

  • BlackBerry Z30 Wifi - connected but no internet

    Hello!

    I m new to Blackberry and just received my Z30 (that I really like a lot!)

    I still have a problem with the wifi connection. I managed to connect to my wifi router. In the settings, I see that the connection is active. The signal is good.

    But on the top bar, I still see the 3G icon (instead of the wifi icon). I also received a message that my wifi has only limited access to internet.

    I know the router works, because all my other devices (for example the laptop I m typing this message on) do not have access to the internet.

    Are there special settings, I have to check on my blackberry z30?

    I found the wifi settings advanced with a lot of technical information about the wifi connection - which, this information, if I post to help solve my problem?

    Thank you very much for your advice!

    Try to go to settings network connections and disable data services and then try to reconnect to the wifi

Maybe you are looking for