Bridge CC blocks on 10.11.4 El Capitan
Updated last week my bridge and my Mac now CC bridge accidents don't even start. Tried all the tricks to application normal Adobe, trashed the cache, reset the app, cmd shift option was actually the only thing I've seen off poster must have separate areas. I've also updated the camera Raw.
(Minor complaint here) Whenever this year released a patch or a tweak is done to make the program better, it the wreck of the workflow. I used adobe since Photoshop 4 products and know the s and fairly well but lately its reliability is Lightroom paragraphs attached is all or nothing, I just don't understand.
I had a chat with technical support on Friday and got there is a known error. Is all that is done in this regard? -' Dead silence in the cat' I am addressing my fellow adobe brothers - should - I scrap CC and just use 6 is at least stable.
All my other CC Apps work fine except for the bridge CC is crazy. I use it a lot with Indesign that's why I'm upset deadline imminent software fight against me.
HI Kirk,
We apologize for the inconvenience caused by the Crash of bridge.
So far the only accident that was solved was for the accident of dual display.
Solution to repair the bridge CC 6.1.1 and 6.2 crashing on Mac OS X El Capitan
We are still working to correct other problems of crash. Returning then to the bridge 6.0 is the only solution right now.
Kind regards
Gerard
Tags: Bridge
Similar Questions
-
What should I do when Bridge CS5 blocks PS CC install?
Bridge is currently not active / current running on my computer, but when CC PS tries to install, bridge .exe is somehow interrupt the installation of PS and I get an error message asking me to close the bridge. However... obviously fill _isn't_ actually being of execution.
I don't know what to do and Adobe help line is currently closed and I was hoping to install PS tonight.
Thank you!
Complete the process in the Task Manager / activity monitor.
Mylenium
-
I have a new iMac 27 inch Retina 5 K (end of 2015) 3.2 GHz with 32 GB of RAM and bridge is now used in the region of 20-25 GB + of it on a regular basis. My previous iMac 24 inch (end of 2009), with 'only' 8 GB of RAM, ran faster and the RAM usage was less than 45%. While Bridge works very slowly - much slower than my old iMac - and I can't work out why.
I compacted and emptied the cache, reduced the number of images in each folder and reduced the size of the preview, but nothing seems to make any difference. I forgot something or are my expectations too high? The bridge is my main tool with Camera RAW/Photoshop before importing all the files in Lightroom and speed reduction is initially serious workflow problems.
Someone a suggestions please?
Hello
Greetings!
See this article: https://forums.adobe.com/docs/DOC-6301
Concerning
Jitendra
-
Opened images of the bridge to cab not in chronological order
+ Bridge sometimes hangs when sorting (batch) of large amounts (up to and over 500) images... for example: View_Sort_date created_CRASH. When adding metadata or keywords of large quantities of images bridge also blocks...
The most important question for my workflow is to have images in the order opened in ACR.
Model name: MacBook Pro
Processor name: Intel Core i7
Processor speed: 2.6 GHz
Number of processors: 1
Total number of Cores: 4
(By heart) L2 Cache: 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Hi alanm,
Please reset the Bridge preferences and then try it.
Measures
Start Adobe Bridge, and immediately press Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS down) until the dialogue box reset settings appears.
Select all three options - reset preferences, reset Standard Workspaces and all miniature Purge Cache - and then click OK.
Reference: troubleshooting errors, freezes | Adobe Bridge | Windows, Mac OS
Let us know if it works.
Kind regards
~ Mohit
-
As sson as I have run Bridge it blocks
I use Windows 8/64-bit
I have uninstalled reinstalled without result
Help, please!
Hi Steve,.
Welcome to the community!
Follow the steps mentioned in http://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Thank you!
Ankit
-
CC hung up bridge building criteria in El Capitan-help!
Bridge CC hangs indefinitely 'building criteria' in El Capitan.
I recently did the upgrade to El Capitan, since the bridge was buggy, I have to force to leave whenever I use it. It works on smaller files, but anything with a large number of files it contains causes her hang up indefinitely and I have to force quit.
Have you tried the following as suggested in the forums:Uninstall BridgeCC, re - install. Change the preferences in bridge of CP do not save a snippet of 100%. extended memory allocation. In the library, renamed bridge Cache.
Bridge CC is always completely unusable.
I tried just letting run to create the darn cache, but a few hours later he was still hanging!Using iMac late 2009, 3.06 GHz intel core 2 duo. NVIDIA GeForce 9400 256 MB. 12 GB of ram, running new El Capitan.
Never had this problem until the upgrade to El Cap.
all possible assistance out there? Thank you!
Just an update... I noticed that El Capitan was automatically installed a ton of various foreign language on my system fonts - in many places, in particular, a ton of Asian and Hindi fonts.
I noticed when I opened the font book to search for a font I want to use...
and so I spent the day to uproot them and those that I was able to disable (some could not be disabled, they live in the OS system fonts folder).
for now, which seems to have solved my problem, if there was a bad police among them - or just the volume of additional fonts has been overwhelming my system, I don't know. (I have a ton of fonts on my system already, as I am a designer).
It's a mystery, I don't know why they have been installed, or why policies would affect the bridge, but so far, bridge seems more stable and got no hung up as I did.
Thanks for trying to help!
-
Photo Downloader Adobe Bridge recognizing only no camera after upgrading to El captain in Mac
Recently, I upgraded my Macbook Pro to El captain, since then my Adobe Bridge Photo downloader no longer recognizes my cards or camera. It is not the USB cable as iPhoto wants to quickly download photos I want to use. Anyone have any idea if it is a small problem with the new OS or would be - something else and if the former there is a fix for it soon?
Discovered Adobe Bridge CC with Mac OS 10.11 (El Capitan) does not work with many USB devices to import images (including iPhone).
Apple said: "the USB stack is completely redesigned to improve stability and performance compared to Mac OS 10.10. Applications and third-party drivers for vendor-specific USB devices may require modification. "This is something APPLE has changed, that I hope that Adobe can answer, because now there is no real solution. I use this work around:
- Import images with Photos Apple app
- Choose file > export > export Original unmodified
- Save the files where you want
- Batch rename the images and add metadata in Adobe Bridge
Adobe has released this technical note on the bridge issue help: https://helpx.adobe.com/bridge/kb/bridge-and-el-capitan.html
It is a solution for some devices based on Android, you can change the mode of the PTP/MTP device in storage mode USB mode/mass (see the instructions on how to do this with your device provider). This article about the same problem with Photoshop Elements was given instructions: connected - https://helpx.adobe.com/elements-organizer/kb/elements-organizer-does-not-recognize-some-d mac-os-10 - 1.html
- Import images with Photos Apple app
-
Cisco Aironet autonomous AP - WDS Configuration...
Hello.
I have 10 AP I am defining as my WDS access point / Radius Server and configure the other 9 to use this AP as the Radius server. LATHQWAP01 the AP I want set up as WDS and LATHQWAP02 server is the first AP I want to link to the WDS AP. However, I'm struggling...
I used the CLI as the GUI is beyond useless. Here are the commands that I published on the radius (LATHQWAP01) server:
LATHQWAP01 (config) #aaa new-model
LATHQWAP01 (config) #aaa rad_eap radius server group
LATHQWAP01 (config-sg-RADIUS) #server X.X.201.170
LATHQWAP01 (config-sg-RADIUS) #exit
LATHQWAP01 (config) #aaa authentication login eap_methods group rad_eap
LATHQWAP01 (config) #radius - X.X.201.170 - key cisco123 host server
LATHQWAP01 (config) #-local radius server
LATHQWAP01(config-radsrv) #nas X.X.201.170 - key cisco123
LATHQWAP01(config-radsrv) #user wds password cisco123
LATHQWAP01(config-radsrv) #exit
LATHQWAP01 (config) #wlccp wds priority 255 interface bvi1
LATHQWAP01 (config) #wlccp authentication infrastructure eap_method Server
LATHQWAP01 (config) #wlccp ap wds user password cisco123
LATHQWAP01 (config) #exit
LATHQWAP01 #show wlccp wds
MAC: 881d.fc46.c865, IP-ADDR: X.X.201.170, IPV6-ADDR::
Priority: 255
Interface BVI1, State: Administratively autonomous - ACTIVE
AP count: 0 Count MN: 0
Here are the commands I issued on the AP I want to link to the WDS / AP RADIUS.
LATHQWAP02 #conf t
Enter configuration commands, one per line. End with CNTL/Z.
LATHQWAP02 (config) #wlccp ap wds user name password cisco123
LATHQWAP02 (config) #exit
LATHQWAP02 #show wlccp ap
WDS = 881d.fc46.c865, IP: x.x.201.170 IPV6:
State = wlccp_ap_st_leap_auth
IN authenticator = IP: x.x.201.170 IPV6:
However, you can see on the Show wlccp wds output the number of AP is 0. Surely, you need 2? AP WDS with himself and the second point of access I linked?
See the race on the WDS (LATHQWAP01)...
User access audit
User name: admin
Password:
LATHQWAP01 #show run
Building configuration...
Current configuration: 5148 bytes
!
! Last configuration change at 22:53:11 UTC Tuesday, March 2, 1993 by admin
version 15.3
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LATHQWAP01
!
!
Pulse 9 logging console
!
AAA new-model
!
!
AAA rad_eap radius server group
Server x.x.201.170
!
AAA authentication login default local
AAA authentication login eap_methods group rad_eap
AAA authorization exec default local
!
!
!
!
!
AAA - the id of the joint session
no ip source route
no ip cef
!
!
!
!
dot11 syslog
dot11 vlan data name of vlan 1000
dot11 vlan-name COMMENTS vlan 1234
dot11-name of vlan VOICE vlan 1200
!
SSID dot11 x
VLAN 1000
open authentication
authentication-key wpa version2 management
WPA - psk ascii 7 046F03555A2A55475C1B090241
!
SSID dot11 x
VLAN 1234
open authentication
authentication-key wpa version2 management
Comments-mode
WPA - psk ascii 7 0828425A0C15091E150E0210272A362336212B1D00
No customer ID MFP
!
!
Dot11 phone
!
!
!
username ADMIN privilege 15 password 7 062A5B35601E0A4D21
!
!
!
class-map correspondence _class_Lync2
match ip dscp cs3
class-map correspondence _class_Lync0
match ip dscp cs5
class-map correspondence _class_Lync1
match ip dscp af41
!
Policy-map Lync
class _class_Lync0
COS Set 6
class _class_Lync1
COS Set 5
class _class_Lync2
COS Set 4
!
Bridge IRB
!
!
!
interface Dot11Radio0
no ip address
!
encryption mode vlan 1000 ciphers aes - ccm
!
encryption mode vlan 1234 ciphers aes - ccm
!
SSID x
!
SSID x
!
gain of antenna 0
STBC
root of station-role
!
interface Dot11Radio0.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group subscriber-loop-control 255
Bridge-group 255 covering people with reduced mobility
Bridge-group 255 block-unknown-source
No source of bridge-group 255-learning
No bridge group 255 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio0.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Dot11Radio0.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group subscriber-loop-control 254
Bridge-group 254 covering people with reduced mobility
Bridge-254 block-unknown-source group
No source of bridge-group 254-learning
No bridge group 254 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio1
no ip address
!
encryption mode vlan 1000 ciphers aes - ccm
!
encryption mode vlan 1234 ciphers aes - ccm
!
SSID x
!
SSID x
!
gain of antenna 0
peakdetect
no block of dfs
STBC
channel SFR
root of station-role
!
interface Dot11Radio1.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group subscriber-loop-control 255
Bridge-group 255 covering people with reduced mobility
Bridge-group 255 block-unknown-source
No source of bridge-group 255-learning
No bridge group 255 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio1.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Dot11Radio1.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group subscriber-loop-control 254
Bridge-group 254 covering people with reduced mobility
Bridge-254 block-unknown-source group
No source of bridge-group 254-learning
No bridge group 254 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface GigabitEthernet0
no ip address
full duplex
automatic speed
!
interface GigabitEthernet0.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group 255 covering people with reduced mobility
No source of bridge-group 255-learning
service-policy input Lync
service-policy output Lync
!
interface GigabitEthernet0.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-Group 1 covering-disabled people
No source of bridge-Group 1-learning
!
interface GigabitEthernet0.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group 254 covering people with reduced mobility
No source of bridge-group 254-learning
service-policy input Lync
service-policy output Lync
!
interface BVI1
881d.fc46.c865 Mac address
IP address x.x.201.170 255.255.254.0
!
IP default-gateway x.x.201.202
IP forward-Protocol ND
IP http server
aaa IP http authentication
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
local RADIUS server
NAS x.x.201.170 touches 110A1016141D5A5E57 7
NAS x.x.201.171 touches 1511021F07257A767B 7
the nthash wds user 7 013250267D2D5257036A1E5F3F5144332E5B220872747B10107531574626
24770B
!
RADIUS-server host 10.10.201.170 touches 14141B180F0B7B7977 7
!
rap_eap RADIUS server
!
1 channel ip bridge
!
!
wlccp ap username wds going 7 104D000A061843595F
And show performed on the WDS AP client...
User access audit
User name: admin
Password:
LATHQWAP02 #show run
Building configuration...
Current configuration: 4668 bytes
!
! Last configuration change at 03:25:50 UTC Tuesday, March 2, 1993 by admin
version 15.3
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LATHQWAP02
!
!
Pulse 9 logging console
!
AAA new-model
!
!
AAA authentication login default local
AAA authorization exec default local
!
!
!
!
!
AAA - the id of the joint session
no ip source route
no ip cef
!
!
!
!
dot11 syslog
dot11 vlan data name of vlan 1000
dot11 vlan-name COMMENTS vlan 1234
dot11-name of vlan VOICE vlan 1200
!
SSID dot11 x
VLAN 1000
open authentication
authentication-key wpa version2 management
WPA - psk ascii 7 046F03555A2A55475C1B090241
!
SSID dot11 x
VLAN 1234
open authentication
authentication-key wpa version2 management
Comments-mode
WPA - psk ascii 7 0828425A0C15091E150E0210272A362336212B1D00
No customer ID MFP
!
!
Dot11 phone
!
!
!
username ADMIN privilege 15 password 7 062A5B35601E0A4D21
!
!
!
class-map correspondence _class_Lync2
match ip dscp cs3
class-map correspondence _class_Lync0
match ip dscp cs5
class-map correspondence _class_Lync1
match ip dscp af41
!
Policy-map Lync
class _class_Lync0
COS Set 6
class _class_Lync1
COS Set 5
class _class_Lync2
COS Set 4
!
Bridge IRB
!
!
!
interface Dot11Radio0
no ip address
!
encryption mode vlan 1000 ciphers aes - ccm
!
encryption mode vlan 1234 ciphers aes - ccm
!
SSID x
!
SSID x
!
gain of antenna 0
STBC
root of station-role
!
interface Dot11Radio0.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group subscriber-loop-control 255
Bridge-group 255 covering people with reduced mobility
Bridge-group 255 block-unknown-source
No source of bridge-group 255-learning
No bridge group 255 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio0.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Dot11Radio0.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group subscriber-loop-control 254
Bridge-group 254 covering people with reduced mobility
Bridge-254 block-unknown-source group
No source of bridge-group 254-learning
No bridge group 254 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio1
no ip address
!
encryption mode vlan 1000 ciphers aes - ccm
!
encryption mode vlan 1234 ciphers aes - ccm
!
SSID x
!
SSID x
!
gain of antenna 0
peakdetect
no block of dfs
STBC
channel SFR
root of station-role
!
interface Dot11Radio1.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group subscriber-loop-control 255
Bridge-group 255 covering people with reduced mobility
Bridge-group 255 block-unknown-source
No source of bridge-group 255-learning
No bridge group 255 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface Dot11Radio1.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-group subscriber-loop-control 1
Bridge-Group 1 covering-disabled people
Bridge-Group 1 block-unknown-source
No source of bridge-Group 1-learning
unicast bridge-Group 1-floods
!
interface Dot11Radio1.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group subscriber-loop-control 254
Bridge-group 254 covering people with reduced mobility
Bridge-254 block-unknown-source group
No source of bridge-group 254-learning
No bridge group 254 unicast-flooding
service-policy input Lync
service-policy output Lync
!
interface GigabitEthernet0
no ip address
full duplex
automatic speed
!
interface GigabitEthernet0.1000
encapsulation dot1Q 1000
Bridge-group 255
Bridge-group 255 covering people with reduced mobility
No source of bridge-group 255-learning
service-policy input Lync
service-policy output Lync
!
interface GigabitEthernet0.1200
encapsulation dot1Q 1200 native
Bridge-Group 1
Bridge-Group 1 covering-disabled people
No source of bridge-Group 1-learning
!
interface GigabitEthernet0.1234
encapsulation dot1Q 1234
Bridge-group 254
Bridge-group 254 covering people with reduced mobility
No source of bridge-group 254-learning
service-policy input Lync
service-policy output Lync
!
interface BVI1
f44e.053c.092d Mac address
IP address x.x.201.171 255.255.254.0
!
IP default-gateway x.x.201.202
IP forward-Protocol ND
IP http server
aaa IP http authentication
no ip http secure server
IP http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
!
!
!
1 channel ip bridge
!
!
wlccp ap username wds going 7 00071A1507545A545C
!
Line con 0
line vty 0 4
transport of entry all
!
ntp2c.MCC.AC.UK SNTP server
SNTP client distribution
end
I'm completely at a loss with this. Any help is greatly appreciated.
This is what looks like my WDS Setup:
RADIUS AAA server WDS group
the name of the WDS server
!
AAA authentication login eap_methods group rad_eap
AAA authentication login mac_methods local
AAA authentication login method_WDS group WDS
AAA authorization exec default local
AAA accounting network acct_methods power group rad_acct
local RADIUS server
No leap authentication
no authentication mac
NAS 192.168.180.6 touches 062506324F41584B56 7
the nthash wds user 7 132444425D595072727C7F63167B4056322654077C0E0475285A4B32787E71710A
!
format of server RADIUS attribute 32 include-in-access-req hour
!
RADIUS WDS server
ipv4 192.168.180.6 address auth-port 1812 acct-port 1813
touch 7 14341B180F0B7B7977
!
Bridge Protocol ieee 1
1 channel ip bridge
!
!
wlccp ap username wds password 7 140016185D 5679
wlccp-server authentication infrastructure method_WDS
priority interface 255 wlccp wds BVI1
but I have a question, you will allow an SSID with 802. 1 X? If you're not then gains WDS nothing as the PSK will be validated at each AP WDS allows you an access point to the authenticator for the users, if when you move from one AP to another do you a 4 - way handshake with the WDS master instead of a handshake 15 pin with the AAA server.
HTH,
Steve
-
Lightroom sends images to Photoshop with incorrect orientation?
I'm new to Lightroom. I'm used to the use of bridge. In this report, guidance, that I used in bridge is blocked to Photoshop. Now with Lightroom, I directed my images individually. But (using the menu option ' Photo > edit in > Edit original ") Photoshop is not open them in the direction that I've used in Lightroom. In addition, when I save the Photoshop file, it is redirected incorrectly in Lightroom. So I had to reorient photos 3 times. Is there a better way? I guide my images in Lightroom, because typing is quick and can be applied to multiple images.
lauram12098586 wrote:
I'm new to Lightroom. I'm used to the use of bridge. In this report, guidance, that I used in bridge is blocked to Photoshop. Now with Lightroom, I directed my images individually. But (using the menu option ' Photo > edit in > Edit original ") Photoshop is not open them in the direction that I've used in Lightroom.
When you change the orientation of the image in Adobe Bridge, the new orientation is automatically written in EXIF "Orientation" field tag file. When you change the orientation of the image in LR data EXIF of the original file are not automatically updated. After you change the orientation of the image (s) in LR use the keys CTRL + S keys to write the change in the EXIF data for the file. You can modify several files at once by selecting all of them and then using CTRL + S keys. Policy changes will now be seen in Adobe Bridge and Psalm
EXAMPLE EXIF DATA
-
DNG Converter is not able to open the cr2 (greyed icons) files.
DNG Converter not able to open the cr2 (greyed icons) files if they are on the disc or the office. With the help of Mac El Capitan, CC, Canon 6 d. Used to work on the earlier Mac OS. Similarly, the "get photos from camera" button in cc Bridge does not detect any photos or devices. What needs to be put in place for the DNG Converter recognise once again my cr2 files?
It's apparently a problem with El Capitan. See this thread:
Photo Downloader Adobe Bridge recognizing only no camera after upgrading to El captain in Mac
Copy of the correct answer: ' discovered Adobe Bridge CC with Mac OS 10.11 (El Capitan) does not work with many USB devices to import images (including iPhone). " Apple said: "the USB stack is completely redesigned to improve stability and performance compared to Mac OS 10.10. Applications and third-party drivers for vendor-specific USB devices may require modification. "This is something APPLE has changed, that I hope that Adobe can answer, because now there is no real solution. »
-
It happens constantly and is extremely frustrating. Everyone knows this or does anyone know a fix? I use an Imac, retina 5K to 27 in late 2015.
Thanks in advance.
Disconnect all your external drives, then check if blocking is occurring always. El capitan has made some changes that actually a bit lazy with reassembly of external hard drives after reactivation, and it's a good idea to check if the cause of your problem is the external drives. If this does not prevent blocking problems, you can reset your Lightroom preferences files. See here: http://www.lightroomqueen.com/articles-page/how-do-i-reset-lightrooms-preferences/
-
Adobe Bridge CS6 on my Toshiba 32 bit?, I don't know why, but when I try to run this program, then the DEP blocks Adobe Bridge, what's the problem?
This means that the program will use the incorrect memory or he is attacked by hackers or virus. See if there is an updated version.
To allow the program to function in any case type DEP in the Start menu - Help and Support.
Help
Change Data Execution Prevention settings
Data Execution Prevention (DEP) is a security feature that protects against viruses and other security threats by analyzing your programs to make sure that they use the system safely memory.
If you choose to protect all programs, you can always turn off DEP for individual programs. If you think that a program does not run correctly when DEP is enabled, check for a compatible version of the DEP program or an update from the software publisher before you change your DEP settings.
Click to open the system.
Click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Under performance, click settings.
Click the Data Execution Prevention tab, and then click turn on DEP for all programs and services except those I select.
To turn off DEP for an individual programSelect the check box next to the program that you want to turn off DEP for and then click OK.
If the program is not in the list, click Add. Navigate to the Program files, search for the executable file of the program (it will have the .exe extension) and then click Open.
To turn on DEP for an individual programClear the check box next to the program that you want to turn on DEP for and then click OK.
-
If I open a picture of the bridge, I often have the large white or black areas/blocks/rectangles in the pic. Changes in areas, if I choose another size. If I save the pic is ok, nothing to see rectangles. What is c? How to stop it? Thank you.
It is a question of gpu. It has been discussed many times here. See this thread. https://forums.Adobe.com/thread/1855166?q=black%20and%20White%20squares
-
Updated bridge blocks on all open. How to recover the old bridge?
I've updated the bridge and now I've lost the previous program. Some time ago I had to remove Photoshop CC and returned to 2014 because my MacBook is older and could not do. Now my new bridge falls down every attempt to open and update obviously was a mistake since I use Photoshop 2014.
How can I go back to old bridge? My only option on my Cloud application is the new bridge CC.Glenys Morgan
The last bridge is broken. I just had a conversation with one of their product specialists remotely that I restored a version (and it works). The present update CC (today) will crash the application, so be warned. Keep an eye on blogs.adobe.com for updates, he said.
-
Under Photoshop 2015 a Mac v 10.10.3 with 8 GB of RAM. I get black, white or transparent rectangles appearing in my images. The information is still there because it does not appear in the bridge. Usually occurs with files.
Define the drawing for hardware acceleration to basic mode in the preferences.
Mylenium
Maybe you are looking for
-
How can I change time appearance persona
What happened to the little box which allow me to change the time that the personas were on the top of my screen? How can I get it back? I used to get all this: Tools > characters >...
-
I use a Mac with OS X 10.11.4 load. I also have Photos v 1.5 In the Photos, I have iCloud library enabled, and 'Download this Mac originals '. I also have an iPhone 6 and iPad 2 Air, both iOS 9.3 operating and with iCloud library lit. My question i
-
Where to find a motherboard for Satellite A50-109
Y at - it all those who those who coan help me where to find a motherboard for a satellite SA50-109 model? My laptop suddenly just stops and it cannot be reactivated. I had it check by a few technicians and told me that the motherboard must be replac
-
Lin Bus using a master and a slave 8476
Hi, I'm kind new to the LINEN and have 2 Lin 8476 s tied to a single computer on 2 pieces of equipment. One is a master with it's LIN pin-7 since the hardware device-related and the other is a slave with his unit of material related to the pin7. I ne
-
How to transfer information from my laptop to my data traveller or flash drive?
Original title: IM having a blond momet LOL How to get information from my laptop to my data traveller or flash drive not sure leave which is the correct name