Bridge media slot does not work on the Qosmio series F

Similar Questions

• Re: Recovery disc creator does not work on the Qosmio F50

  Hello

  I recently got my new laptop Qosmio F50. I decided to burn the recovery disk and so I did. But during the burning process, I got an error that is:

  "Diference were detected between different folders:

  Source path: (origin)
  F:\HDDRecovery\SWImg\06907XPS.swm

  Target path: (I would translate as destination)
  G:\06907XPS.swm
  (error code: 02016F-3 c-00000000)

  Well, I've been through the posts from diferent on this forum and I didn't know of any help on this matter. Of course, I bought new DVD-R TDK and I also tried with verbatim DVD-R but it does not work.

  Anyone have any idea how to deal with this issue, because for example I have still no recovery disc and if something would have happened, I wouldn't be able to configure back my OS.

  Thanks in advance for your help

  Best regards

  Hello

  To me it sounds like the final burning self-check failed and the application couldn't t properly compare two files on the HARD drive and DVD.

  Why? It's not easy to say maybe the problem is with the DVD disc not fully supported, but I saw that you used the TDK DVD-R it are really good media and should run.

  Maybe you should try to update the firmware

• Motion controller does not work on the Qosmio G50

  Hello

  as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I discovered today that my gesture controller no longer works?

  I went on the site of toshiba europe and downloaded the latest driver for it but once again, I received the message "an error has occurred in the toshiba quad core processor HD = 0x800A0100 code?

  Any help would be wonderful that its driving me around the bend!

  > as well as problems with my touchpad that I can't seem to get the job and my fn + f9 that does not work, I found out today that my gesture controller no longer works?
  So much trouble, you got there. You may create a Groove and reinstall the original recovery image. After having done this you own preinstalled OS and with the factory settings, everything should work again.

  What do you think about this?

• AC adapter does not work with the Qosmio F50-111

  Hello world

  I bought a Qosmio F50-111 this morning.
  The power adapter does not work on my computer (no led lit when connected), but he's working on a Satellite A300 for a working partner.
  And his power works on mine.

  I would like to know if people here have a Qosmio F50-111, the model of power that I have a model 3290-3AC3... I would like to know if it's good.

  Thank you all

  Before you expect an answer here, contact your local dealer and clarify this situation. You can also contact the nearest authorized service provider. They can say with certainty if the power adapter is one that suits or not. If you have the wrong I'm sure you get the right one for free.

• Media buttons do not work on the Qosmio G25-AV513

  OK, so my problem is that my media above the keys Fn buttons no longer work.
  They will beep when you press on them, but nothing happens. I can't change even more than the brightness of my screen.
  Anyone know where I can go to find the files needed to download or point me in the right direction what to do?
  Any help would be appreciated.

  Thank you

  Also, I know not how long they stopped working because I did not need any of them for several months, I just tried to use it today and can't.
  The model is a G25-AV513

  Hi mate,

  Please visit the following link:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  search for your computer and download the last value added package (VAP). If no one is available, then find a software which is called as "Flashcards" or something with "Flashcard buttons".

  Install them and the Fn keys should work again.

  Greetings

• "bluraydp - 20130117155646.zip" does not work on the Qosmio X 770

  Hello friends,

  I had a problem, I received a few days ago a toshiba tempro alert to upgrade my drive internal bluray
  CARPET * BD - CMB UJ141EF drive with this file bluraydp - 20130117155646.zip.

  I got a Qosmio x 770 with windows 7 x 64, I unziped the file, there is a TC30526100B.exe inside the zip, with an extractor of archive of toshiba.

  I run the TC30526100B.exe and it extracted these files:
  tinstallwb.exe
  tinstall.exe
  tinstallb00.bat
  tinstallwb.exe.ini
  PreinstBDP.vbs
  SMIPlayerSetup.exe
  BDPlayerSetup_Patch.vbs
  WBDJA44I. DLL
  Bluestream.bmp
  WBTOS45I. DLL

  When I run tinstallwb.exe and tinstall.exe he does nothing, when I run SMIPlayerSetup.exe, it says cannot find our player in our systems.

  Which player they are talking about?

  Thanks for your help

  Hello

  This is the patch of Toshiba Blu - ray disc player.
  The full version of the Toshiba Blu - ray player software must be installed on your system in order to apply this hotfix.
  You should find it somewhere in
  All programs-TOSHIBA \TOSHIBA Blu - ray player.

• No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file." And the media player does not work

  Windows Media Player

  No matter what I try to play, I get this message, "Windows Media Player has encountered a problem while playing the file."  And the media player does not work

  Reset the WMP.

  Step by step instructions are given here: -.

  http://www.mydigitallife.info/how-to-uninstall-and-re-install-Windows-Media-Player-12-WMP12-in-Windows-7/

• Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

  Hello

  For someone to really help him, it is important to give as much information as possible.

  You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

  If it happened "yesterday" did you updated anything or whatever installed?

  Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

  What TV card are you using and have you verified that this works correctly?

  If you get not a photo is the antenna in place properly?

  Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• Media Player does not work; message says to check the resolution and brightness.

  My computer just upgraded day and now the media player does not work. I use it everyday and it is a first.
  It says to check the resolution and brightness, and when I did they are recommended places.   Help, please!  Thank you!

  Hello

  1. are you referring to Windows media player?

  2. What is the exact error message?

  3. when exactly you receive this message? By playing any video/audio?

  4 does happen with a particular video/audio?

  5. have you made changes on the computer before this problem?

  If you use Windows media player, you can follow the methods.

  Method 1:

  You can run the fix - it from the following link.

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

  Method 2;

  Step 1:

  You can uninstall Windows media player. Check out the following link.

  Uninstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find multimedia and uncheck Windows Media Player.
  d. restart the computer.

  Step 2 :

  Reinstall Windows Media Player
  a. go initially and in search type 'Turn Windows has or not'.
  b. click on "Turn Windows features on or off".
  c. find the multimedia functions and place a check mark in front of the Windows Media Player.
  d. restart the computer and check the issue.

  For more information, see the article:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Post back with the results for you help more.

• using Xp the sd popup does not work on the insertion of the sd chip into the slot, how can it be repaired?

  normally on the insertion of the sd chip a pop-up dialog box appears asking what route you want that information to sd etc. This pop up does not work and the only way I can get into the sd information is to search on D:, then click on 'Open' please notify if MS can restore the pop up facillity?

  Hi JohnWack,

  Welcome to the Microsoft Community Forums.

  We're here to help and guide you in the right direction.

  According to the description of the problem, I understand that you do not get the AutoPlay option when you insert the SD chip into the Windows XP computer.

  -What do you mean by "what route you want to than the sd information etc."? Are you referring to the auto play feature?

  Try these methods.

  Method 1

  Double-click on "My Computer", right-click on the drive you want to Auto play and click 'properties '.

  Click the 'Auto play '.

  Method 2

  Steps to enable AutoPlay.

  1. start, click run, type Gpedit.msc in the Open box, and then click OK.
  2. under Computer Configuration, expand models of administration and then click System.
  3. in the settings pane, do a right click Enable Autoplay, and then click Properties.

  For your reference.

  Windows XP does not recognize a secure digital card when you reinsert it after you remove it
  http://support.Microsoft.com/kb/812661

  It will be useful.
  Let us know if you encounter problems under windows in the future. We will be happy to help you.

• Recovery Media Creator does not work.

  My recovery media creator does not work. Its shows that 'no disk HARD recovery area '.
  What to do to achieve a recovery of HARD drive space?

  The message on the screen says: no HDD Recovery area

  This means that the recovery media creator software is unable to find image files stored on the HARD drive recovery partition.
  Why?
  There are different reasons for this...

  One of the reasons could be the missing HARD drive recovery partition or files (image files) have been deleted...

• Windows media player does not work as no driver DVD

  Had to format drive (trojan) & reinstall Windows XP home. Now Windows media player does not work as no DVD driver download from Toshiba site?

  Hello

  Usually the Windows media Player is not able to read DVD movies IF no plugins were installed.
  To watch DVDs, you can use programs such as WinDVD or PowerDVD.
  These programs are designed for the DVD play!

  But you can also visit the Microsoft Web site and search plug-ins for Windows Media player.
  Then you can download and install to play a DVD with WMP

  Best regards

• Satellite A300 - easy key of Windows Media Player does not work

  Can someone help me?

  My easy key of Windows media player does not work and I have installed the package of value added. I don't know what's wrong all the other buttons seem to work well.

  When the VAP is installed this button should be enabled to start Windows media player by default.
  In any case, you can test the functionality if you set it to start another application.

  Configuration tool buttons you will find under:
  Toshiba Assist (shortcut on the desktop) > Optimize > Toshiba Button support.

• After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work.

  After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work. I don't have reinstall all disks. Will install tools software system Dell, Sonic RecordNow, Sound Blaster Live, or CyberLink Power DVD play cd possible? Thank you.

  original title: Media Player

  Hello

  1. What is the exact error message or error code when you try to open Windows Media Player?

  2. what version of Windows Media Player?

  3. What is the issue you are experiencing during playback of the CD?

  I suggest you follow the Microsoft article reference and check if it helps.

  Troubleshooting playback in the Windows Media Player for Windows XP: http://support.microsoft.com/kb/306317

  Resources for the resolution of problems in Windows Media Player: http://support.microsoft.com/kb/843509

  I recommend you to install the software provided by Dell disk and check if it makes a difference.

  Note : using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• 128 - GB MicroSD card does not work with the new Clip +.

  My old Clip + (black, 8 GB) was getting very long in the tooth, so I ordered a replacement off Amazon.  As far as I know, it is identical to the old, but a very unpleasant difference is presented - it does not work with the MicroSD card which has been a huge part of why I got a Sansa at all.  He acknowledges, but after a media updated I'm lucky if more than one album appears.  And that's what's so crazy!  You just blow through the update in a few seconds, and when I navigate on the map, there is nothing or a handful of albums random, orphaned.  That's happened?  I updated the new Clip + for the current firmware (as I had done with previous); I made sure to reproduce all the parameters that I would be put in place before--I can't imagine what could be the cause!

  Treats quick closing:

  The card is formatted in FAT32 with the same sector size in storage aboard the player (32 768 bytes).

  A 64 GB card format works even without any problem.

  I tried to update the media in MTP and MSC mode; the problem is the same in both.

  There is ample space for MTABLE. SYS - I have not yet loaded all the music on the Clip + itself.

  Rockbox plays the card without problem, but the sound quality is horrible (at least on this player; I'm sure that other versions sound best), and its interface is a headache.  No thanks.

  HM.  Looks like to run CHKDSK /F on the map the problem resolved!