Brightness problem

Can someon please help me. I reinstalled the system, and I have my brightness is stuck to the maximum. I'm unable to increase or decrease my brightness using the keys of brightness (f2, f3).

According to me, Miss me a graphic driver. Can someone please send me a link with the necessary driver.

My product number: B6M62EA #ABD
BIOS: F.02

Thank you

Hello

Try to install the graphics driver on the corresponding link below.

AMD graphics driver - Windows 7

AMD graphics driver - Windows 8

AMD graphics driver - Windows 8.1

When the installation is complete, restart the laptop.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • brightness, problem on Pavilion m6 / low on battery


    FOUND THE ANSWER!

    http://h30434.www3.HP.com/T5/notebook-display-and-video/brightness-problem-on-Pavilion-M6-Dim-on-battery/m-p/1752121#M51776 

  • AT200 - drop in brightness problems

    Hello world!

    Recently, I noticed that there is a problem with the brightness of my Tablet (AT200-100).
    When I use it for a while, the brightness begins to fall down by itself.
    Not because of the 'auto' function, because the ambient light continues to be the same.

    The problem is that the "brightness" that I can select continues to fall down, until it reaches approximately 10%! After that, I can not select again more than 10%, the brightness slider does just not go right, so I can only choose from 0% to 10%.

    As I saw that, I saw in the 'quick-settings-clock-menu"how the brightness slider was falling down and down, without being able to restore it to its original position.

    After a while (a long time) with the suspended shelf, I can choose the brightness once again without any problem...

    Moreover, recently the Tablet starts to become much warmer before, or at least that is my impression. Maybe the heat is the cause of the problem?

    Everyone is having this problem?
    I'll try to start to uninstall apps, just in case one of them is the problem.

    Any idea oder?
    Thanks in advance!

    Hello

    Unfortunately, I m not AT200 owner therefore cannot share my experience with this device, but it would be interesting to know if one of the installed app causes this problem
    Would be interesting to know if factory reset would solve this

    Share your experience with us

  • On the P750-13D Satellite screen brightness problem

    Hello world

    I have a portable Satellite P750-13D. My problem is; When I press FN + F7, the brightness of the screen decreases.
    However, when I press FN + F6, increases the brightness of the screen. Thus, he works in an opposite way.

    What should I do to solve the problem?

    Thank you.

    Very strange problem.
    Are you using the original pre-installed OS that you got with your laptop?
    Have you noticed this behavior from the first day?

    As a general rule I don t hear big problem. I imagine that you use different powers and for each plan power plans, you can set certain level of brightness. Using FN + F2 keys you can change the profiles of power and brightness level too.

  • Satellite U840-10V - screen brightness problem

    Hello
    I own a U840-10V laptop and I have a little problem with my screen brightness from the first day I got it.
    The fn keys work correctly. When I press the button Fn + F2 or F3 I see small panel brightness adjustment, but values 1,2,3,5,6 and 7 (except 4) seem to have the same level of brightness (the 4th is darker).

    (I had problems with my backlit keyboard as well, but when I reset the defaults in the bios it worked perfect...)

    so is that what someone knows how can I fix?

    I reinstalled the PVAT to a newer version which was suitable for my laptop and windows7 - 64 bit, on the toshiba support site, but I haven't worked out.

    so if anyone can help me I would love...

    Thank you...

    > I have a little problem with my screen brightness from the first day I got it.
    Which is really strange.
    It works correctly when you change the brightness level in the plan directly to settings?

  • Satellite A100 (PSAA9): Win7 + setting screen brightness problem

    Hello

    I installed Windows 7 64 bit on my toshiba A100 (psaa9) machine and I cannot change the screen brightness more.

    It's always a maximum brightness. FN key doesn't work, and neigther Control Panel I can change the nvidia manually through the brightness. NVIDIA driver is 7.15.11.7967, which is installed automatically with windows.

    In a similar http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=182780 wire
    I have read suggestions on value-added package to install, but there is no package like that for my model.

    How can I solve my problem?
    Thank you

    Hello

    You must install VAP and Support of Flash Card Utility for the FN keys works!
    Installation of VFR will not help you if you should not install Flash memory card Support utility.

    As far as I know, these two tools are not phone specific, so you can choose the VAP and the published Flash card for example utility for Satellite L500!

    I did it on my laptop and it worked fine!

  • Satellite A100-151: Win 7 + brightness problem

    Hello world!

    I just upgraded my toshiba Satellite A100-151 with Win7 ultimate.
    Now, I have a problem with my display brightness setting.
    On win xp, I was able to adjust the brightness using the FN + F6/F7 key... but all the keyboard shortcuts and the FN keys no longer work on win7 and I can't find drivers... Please help!

    Thank you

    Hello

    You must install the package of value added.
    I visited the Toshiba page and found the package of value added for Win 7.

    Download and install it!

  • Z500 brightness problems Windows 8.1 nvidia GT740M

    Hello.

    I have problems with brightness adjustment on my z500. I tried to download and install the "intel" driver update, but get the message that I'm already running later. And I can't find any earlier version in my drivers on drive D. I was using just the normal battery turn when he went suddenly dimmed. No change when you go to electric. Updated running Nvidia GeForce GT740M prosessor graphics card drivers.

    How will I be able to solve my problem

    Thank you

    Hello
    You must install the driver from the lenovo site. Download from below
    http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS037399
    Concerning

  • Brightness problem with aspire switch 10

    Hi all

    I have a gene with a switch screen aspire 10.
    The brightness level is constantly changing. It is not dependend on the ambient light, because I turned off Adaptive brightness. (When I put a flashlight on the light sensor that does nothing).

    For example: sometimes when I switch between the metro and the desktop mode. Notable stage screens turns a bit more or less clear. It also happens when you watch movies, opening programs, almost always when the image changes.

    Does anyone know a solution to this?

    Kind regards.

    To resolve this problem, I did this.

    On the desktop, right-click. Properties of the graph. Power. I turned off the screen of the energy saving technology.

    I hope this works for you also.

  • HP probook with xp with brightness problems

    I have a hp probook running xp, when I plug my power in it gets dimmer and when I unplug it it becomes more clear. How can I change this so brighter when sound sound plugged in?

    Hi, NTC,.
    By default, the factory settings, it will save your backup battery
    for this problem to light,.

    Change your laptop power options:

    Go to start & select RUN & type control then enter Panel will open, select the option to change the settings of brightness for the power supply and the battery mode mode.
    Kind regards
    J Chambers
  • HP 250 G3: Button brightness problems

    Hello!

    I'we had some problems with my button for brightness. When I press the brightness button down, it will be brighter. And even with the other button for brightness. Is a hardware or software problem?

    Please help, it's very annoying.

    Problem solved, just need new driver for HP help button.

    LINK: http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5405424&idx=&swEnvOID=4059&action=driverDocument&itemLocale=&swLang=&swItemId=ob_135423_1&mode=

  • Xperia Z5 Adaptive brightness problem

    My Z5 all news there is a problem with the Adaptive brightness. It is much too dark. Even compared to my Z3. What can I do?

    This is a different problem than the distortion of color. Light sensor works, but it seems that it is not calibrated. The internal screen brightness is at a minimum level.

  • Screen brightness problem

    Hello

    I have a problem with my brightness of the screens. The brightness keys does not work all suddenly and in charms in brightness, I can move the cursor, but nothing happens. My screen is stuck at a all time high. I have a Paviion Windows 8 Hp TouchSmart 15 Notebook PC. I tried disabling and uninstalling my HD graphics card, but the problem persists... What do I do?

    Hi Naruto101,

    We have to remove TeamViewer. Check the Add/Remove programs and make sure that all software has been removed from it. If we can't be deleted from there you can do a system restore to an earlier date until it has been installed, using Microsoft System Restore (Windows 8).

    If you are unable to uninstall with it then you need to get in touch with the Forum of TeamViewer for instructions to uninstall.

    I hope this helps, keep me posted on how things are going.

    Good luck and have a great day!

  • Dell XPS 13 9333 screen brightness problem

    Hello

    Another problem with my new Dell XPS 13 (model 9333) - for any reason, during loading or no, changes in brightness screen without saying me things to do (she just made right now by writing this sentence!).

    Any ideas on why this is happening? It's kinda like a light automatic on a smartphone but much more random thing! It really starts to wreck really my head.

    Any help appreciated no matter how silly it sounds!

    See you soon,.

    Richard

    I found a setting called "enable adaptive brightness" which seems to turn off this nonsense.  On Win8.1, it is:

    Power options > change Plan settings > change advanced power settings > display > enable adaptive brightness

  • EliteBook 2530p - screen brightness problem

    Hello

    I have a new laptop of beautiful 2530p and it's awesome in every way, except a problem.  The screen is nice and bright 100% when it is connected to the power supply.  However when I unplug the screen fades because it is running on battery power.  When I plug the plug back in, the screen don't revert not to sound original brightness, it remains what it was when running on battery power, even though it says that it is the maximum brightness when you press fn + f10.  I have to restart to get max brightness.  Does anyone else have this problem? I am running XP and BIOS is the most recent revision F08.

    Thank you

    Good news. I just upgraded my BIOS with the latest version F0A and I can confirm that this solves the problem of the small screen on the HP Elitebook 2530p.

    Thank you for fixing this.

  • Mask brightness problem

    Basically when I edit my star photos, I use luminosity masks to target the stars or the milky way only. And sometimes I create a similar brightness 5 just to get the really bright stars without affecting the rest of the image. But that is the problem. When I chose to merge all layers before the economy, the brightness in the stars down until they were before, I applied the masks, so that did not help at all. But when I use the luminosity masks to target other things like the sky or dark colors, they stay the same, when I merge layers. And I tried to click and mark all the masks and then choose 'merge these layers' and that worked, but when I saved the file, it will return to normal and the stars lose their luster when recording.

    What can be the problem?

    / Christian

    Here is an illustration of the problem. Half upper is just white dots on a black background. No tonal adjustment here will have No effect. White is always white and black remains black, regardless of what you do.

    But what you can do use a brightness mask and expand / feather it lightly. Then, you can lift only. What you do is essentially create a halo.

    Once you have your mask, you must attack the black top - e.g. raise the slider out of black in a levels adjustment. A setting of the midtones will still have no effect. But this time, you can raise black without affecting the whole image.

Maybe you are looking for

  • Satellite A300 - overheating graphics card

    Hello. My Satellite A300 got recently repaired from the Toshiba official represent in my hometown of Portugal. The problem was overheating, as usual. They understood the problem, it was dust and the radiator was malfuncion. They have changed the radi

  • Save the process of LabVIEW

    Hello! My name is Andreas and I now work with a camera that will show you in real time (its finished I have attaced the file below) I can't save images at a speed of about 300 fps(512*512). I am completely new to labview, so I don't know where to sta

  • Cannot connect to Windows Live or Hotmail

    I get a message pop up at the beginning of a session that there was a problem that caused some parts of the Windows Live ID Sign - in Assistant must be turned off. The binding specified for more information, the http://go.micosoft.com/fwlink/?LinkId=

  • 0a9e error with Victoria II (APPCRASH)

    Hello Since I installed windows 7 on this computer, not so long ago, it seemed unable to fix this particular error: Signature of the problem:Problem event name: APPCRASHApplication name: v2game.exeApplication version: 0.0.0.0Application timestamp: 51

  • Impossible to install 13 Costco drive on PC? Why installation comes to crash upward after that I entered my i.d. and PIN?

    We have a Dell with Windows Vista, 2.5 G of RAM, 27G of free hard disk, 32-bit op system. We cannot install 13 items. Go us as far as installation, enter our Adobe i.d. and your PIN, then small places to keep circling and circling and never plug in o