Broadcom 4313 802.11b/g/n does not not on WPA2-PSK AES encryption.

Similar Questions

• HP Pavilion DV6-7070SE: Broadcom 4313 802.11b/g/n abandon the connection lately

  Greetings,

  I'm planing to spend my wlan to 5 GHz because that starts them currently installed connection every few hours.

  Please advise on the correct module (P/N) for the 5 GHz model.

  If not supported, please refer to the best module that corresponds to my laptop.

  Thank you

  Hi @slimmy10 ,

  Thank you for visiting the Forums HP's Support and welcome. It's a great site for information and questions. I looked in your question about your HP Pavilion Notebook dv6-7070se and the connection Wireless drop. Before changing the wireless card, I would change the channel on the router. Routers are able to communicate to your laptop on several different channels, and sometimes it helps.

  You could disable IPv6 for the laptop. Some say this helps.

  Solve this problem Microsoft Fix it 50413.

  Here is a link to help as well.

  If you still feel the need to change the card to your laptop wireless. Here is a link to page 52 of your manual for cards supported wireless.

  Hope it will be useful.

  Thank you.

• HP 625 4313 802.11b/g/n Broadcom drivers win 8.1

  Nice day! Sorry for my English (I need help or advice.

  Windows HP 625 8.1 x 32

  

  problem with the Broadcom BCM4313GN 802.11b/g/n 1 x 1 wireless network adapter driver

  

  Windows automatically installs a driver for the network - device does not. I installed the driver for win 7 x 32... and the network is often lost (pilots might conflict)...

  Open the safe mode - deleted microsoft driver but after refresh or restart it rooted again.

  network and partially lost through connection to the local network. other devices on the network or router problems are absent.

  

  

  Help to find a link to a stable drivers for win

  fixed help Microsoft disable automatic installation driver.

  Sorry again once, thank you for your attention

  Hello:

  See if this driver works for you.

  I think I see the hardware ID for the adapter WLAN 4313 in the setup information file, even if the system requirements list not the card.

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_129404_1%257CswEnvOID%253D4158%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• I have a windows xp 32-bit sp3 and a 3CRUSB10075 com 3, which will not recognise wpa2-psk

  I havea PC with Windows XP 32-bit SP3 and my 3CRUSB10075 Wireless will not connect to my modem that has wpa2-psk, it does not even as an option

  I would hazard a guess that this particular wireless does not support this type of encryption. You should check your documentation and should confirm. You have no other choice than to set your router to a supported type.

  I hope this helps.

• Pavilion dv6-2152nr: my wireless not connect to internet Broadcom 43225 802.11b/g/n

  Recently I have problems with my wireless, when I turn on my laptop I get this message: "error HP 701 - module not found wireless", then I reinstall the driver wireless, but after awhile the conection to turn off the internet, it don't work unless I restart the machine. I think I should 1340s the wireless card, but I don't know what kind of model I should buy. my laptop is dv6-2152nr

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-2100-entertainment-notebook-PC-serie...

  Hello

  Copy the 593837-001 part number to order. You can add the following link for future reference to:

  http://PartSurfer.HP.com/search.aspx?SearchText=WA763UA

  Part store does not have it, you can try:

  https://www.Amazon.com/HP-WLAN-802-11-BEARKAT-593837-001/DP/B004FHWSTK

  And the first manual on the following link shows you how to replace yourself (page 4-16):

  http://support.HP.com/us-en/product/HP-Pavilion-DV6-entertainment-notebook-PC-series/4041735/model/4125997/manuals/

  Kind regards.

• Qosmio G50 802.11n enabled but does not work properly

  Hello

  I get a new Qosmio G50 on Christmas and now I have a little problem. I use a draft N of D-link access point and I want to use 802.11n mode with my qosmio. But I have some problems with it. I activated the 802.11n mode in the peripheral band Manager and channelbandwidth 2.4 & 5.2 are both set to "auto". But I don't get the 300mbps, 60mbps is what I get. My father has a portable computer from a different manufacture with also a 802.11n wireless card but not Intel and other mobile, I get the 300mbps! I put books together in the same room, the other get the qosmio 300mbps varies from 1 to 81mbps or more.

  -Does anyone know what goes wrong or what I need to change something in the Device Manager? I heard that many other intel WiFi 5100 owners also do not receive the speed of 300mbps.

  can someone help me?

  Greetz

  Have you tried turning off modes of 802.11g/b/a by assigning "802.11n only?

  Access device wireless LAN settings in Device Manager to change these settings.

  Remember not that 300Mpbs speed signal. Actual data transfer speed (less overhead) is less than 100 Mbps

• Atheros AR9285 802.11 wireless card does not work.

  Wireless for my laptop HP that atheros AR9285 recently stopped detecting my router while I have my Netgear G54 WGR614v10 encryption card any type of security, I chose, but it detects my router if I switch off my encryption.

  I read a post from Paul_Tikkanen Atheros WLAN Driver corrects connection issues with many new routers (Linksys, Netgear, D-Link, etc.), I downloaded the driver and installed it but it has not made a difference.

  I also watched to make sure that bluetooth was not on, I read somewhere that it might interfere with my wireless card, but it was not on.

  Any help would be greatly appreciated!  Thank you

  Windows 7

  OK, this is strange, and then we will have to check each setting security on your router and your network card to make sure they match. Access your routers webpage bios and go to network security, if possible on your PC to cable and take note of the security settings and compare them with the security of network adapter settings.
  
  ~ Bios of router ~
  * Usually, which would be the mode key staff/Enterprise wpa or wep.
  * Then check that your type of encryption on the router security example would be AES or TKIP.
  * And then check your 802.11 mode.
  
  ~ NIC ~.
  * go to start button or charms right mouse click Select Network option and click. * highlight of the WiFi adapter which is having right mouse questions click.
  * then choose status to the next screen, click Properties wireless.
  * then select Security tab, try this on your laptop which works as well to make sure everything fits.
  
  Something must have went wrong with the installation of the driver. I think you need to remove or back the driver, restart your laptop and let windows update or HP support assistant app find the right driver for you if it does not.

• Satellite L100 does not connect to with WAP encryption

  I just got a new Satellite L100 and I'm trying to connect to my Netgear dg834g router wirelessly. If I disabled security it connects ok, but if I activate WAP message said little or no connectivity. I can connect to the router via a network cable and it's also ok.
  If someone could help?

  Hello

  Where have you enabled WPA encryption?
  On the WLan router or wireless network card?
  If you have enabled encryption on the wireless network card, so you must also configure the WLan router with this encryption.
  But if encryption has been configured on the router, so I guess that the wifi card does not support this encryption and you will need to choose another type of encryption as WEP WiFi.

  Encryption depends on the specification of the equipment and not over WLan driver.
  So if the card doesn t supports WPA is so not much to do.

• HP dv6-6c10us: HP dv6-6c10us Broadcom 802.11n wireless adapter does not work after windows 10 installed

  I have a laptop HP dv6-6c10us with a Broadcom 802.11n wireless adapter.  It worked fine on Win 7.  When I upgraded to win 10, it has stopped working.  The driver has not been updated since 06/02/13.

  Until the driver is updated by Broadcom or HP, this computer is now a desktop computer.

  Any suggestions on how to get the adapter wireless on Windows 10?

  I recommend you to go back and do a system restore to a point before started to install the automatic updates, and where worked the wireless.

  Then download this tool that stops updates to install automatically.

  https://support.Microsoft.com/en-us/KB/3073930

  Hide all of them and then install one by one until you find the one that is to destroy the wireless connection.

  When you have found the culprit just hide it again and it will not be installed.

  You can create a system restore point each time you install an update.

  Tedious, but you should get where you want to be.

• Broadcom 802.11n network adapter does not work

  Hello

  I am trying to connect to the internet via Wi - Fi.  After the installation of windows on a HP Mini 8 older - I get an error message that the Broadcom 802.11n network adapter problems.   I checked for updated on the HP website and Broadcom drivers and were able to find the answers.  Any ideas?

  Hi Ronjon17.

  I'm glad to know that you've posted on the forums of Windows 8.

  From your description, you are unable to connect to the internet via Wi - Fi.

  Could you please answer the following questions so that we can help you in a way better?

  1. What is the model number of your laptop?

  2. What is the number of brand and model of your network card?

  3. are you able to connect to the internet using a wired connection?

  4 pease check updates about the network card.

  Here are a few methods you can try to solve the problem.

  Method 1: Open the network adapter Troubleshooter by sliding into the right edge of the screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking Search), enter Troubleshooting in the search box, typing or clicking on settings then tapping or clicking the Troubleshooting. Press or click network and Internetand then press or click on the network card.

  See also this link.

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2.

  To open the troubleshooter for Internet connections

  If you cannot connect to the Internet or access a particular Web site, it could be a problem with your Internet connection. Try to use the of Internet connections Troubleshooter to fix the problem.

  ·         Open the troubleshooter of Internet connections by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking Search), entering the troubleshooting in the search box, type, or by clicking on settingsand then by typing or clicking the Troubleshooting. Press or click network and Internetand then press or click Internet Connections.

    See also this link.

  http://Windows.Microsoft.com/en-us/Windows-8/cant-connect-to-a-network

  Also check the information in the device status of network card in Device Manager, please follow this link.

  http://Windows.Microsoft.com/en-us/Windows/Web-networking-help#V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1&Web-networking-help=Windows-8

  Hope the above information helps. Please get back to us if the problem is not resolved.

• Intel PROSet/Wireless on Pro U300 does not recognize, WPA2 or SSID

  Hidden SSID) The Intel PROSet/Wireless client takes up more than an hour sometimes to recognize my wireless router, which is set to WPA2 security and has a hidden SSID. I share with a neighbor, who refused to resign from his security wireless. However, while simple clients such as Netstumbler can find the signal within seconds, the customer supported by Toshiba takes MUCH more time. Why Intel and Toshiba was so slow to update this client? Very simple (1 year) $30 Netgear Wireless USB stick my office connects immediately, without no questions, no problems.

  Windows Windows Update) has just published an "update" that installed itself without my request, which makes now so that the customer of Intel, windows and the system of "configfree" all declare "another wireless control system" when none of them work. Windows now automatically connects to a local wireless router on my street that is not listed on my profile, and who he can't get an IP address because, naturally, it has set up no password.

  True to my name,

  Annoyedman

  Published by: ADMIN

  First of all that this is a user to user forum and the question as why drivers update not faster is meaningless. What we can do is to provide some suggestions that may solve some problems

  Back to your question; I think you should just check the Intel page and need to install the driver WLan last, available for this minPCI wireless network card.
  In addition, you can choose between 2 different WLan configuration possibilities;
  (1) you can use the clean Windows configuration option
  (2) you can use a WLan configuration client as Intel ProSet utility

  If you use the Intel ProSet utility, then the windows own option should be disabled.
  In last but not least you should check if all the parameters of the Protocol TCP/IP LAN wireless are set to automatic.

  By the way; If you are using XP then you must install this fix;

  + Wi - Fi Protected Access 2 (WPA2) / Wireless Provisioning Services Information Element (WPS IE element) update for Windows XP with Service Pack 2 is available.
  http://support.Microsoft.com/kb/893357/en-us/

• TM2 2100er / wireless connection of HP does not work

  reinstalled windows 7 (my hard drive broke)

  everything works fine, except wlan.

  Device Manager indicates that there is no driver installed for the network controller.

  I installed all the drivers from the hp site, so I suspected that my wifi adapter is dead.

  any suggestions?

  Sorry for the bad English.

  PS windows 7 Home premium x 64

  I don't know which is.

  is not recovery disc and its not so easy to order one in my country.

  PS found. Map of WiFi Broadcom 4313 802.11b/g/n 1 x 1 593836-001

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=ob-86003-1&lang=en&cc=us&IDX=1&mode=4& , seems. ill try it now

  PSS it works) thanks for the advice.

• Broadcom 4313GN Wi - Fi 802.11b/g/n 1 x 1 adapter

  Can I change wifi adapter in my ultrabook envy4-1002tx Broadcom 4313GN 802.11b/g/n 1 x 1 adapter wireless Intel® Dual Band Wireless-AC 7260 If Yes so what equipment supports in

  Product name Intel® Dual-Band Wireless-AC 7260

  Model number 7260HMW 7260NGW 7260SDW

  Version 802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, HMC

  802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, M.2 2230

  802.11ac, 2 x 2, PCIe, USB, Bluetooth 4.0, M.2 2226 solder down

  Hello

  Please visit the page #2 of the manual of the second on the following link:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & LC = in & Product = 5317852

  That this list, it may not work at all.

  Kind regards.

• HP Pavilion dv6t-7000: Ralink RT5390R wireless adapter does not connect to 802.11n network

  I have a HP Pavilion dv6t-7000, equipped with the Ralink RT5390R wireless adapter.  For the life of me, I can't get it to connect to my home network when implemented as 802.11n.  They connect other devices. If I change my router 802.11 g, but no other change, doe HP connect. But if I return the router to 802.11n, HP sees the network, and it correctly identifies as a 802.11n network, but does not connect.

  The router is a D - Link DIR-615 (N300 2.4 ghz)

  All this experience? All solutions?

  Woo-Hoo.

  Found a solution.  Both HP and windows said I had the most current drivers, but this HP forum had a link to a newer driver.  Installed and it worked.

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Wi-Fi-problems-HP-Pavilion-G7-1338dx-notebook-PC/m-p/1836467#M33729

• laptop HP pavilion g6: ralink rt3290 802.11bgn wi - fi adapter problem does not not when turn on pc

  Hi iam using windows 8 64-bit HP pavilion g6 my adapter ralink rt3290 802.11 wifi bgn does not work for a few days because of the sudden closure of the pc by the battery problem, whenever it's strcuked reason more to heat or liquidated suddenly drops ralink adapter not worked for some time, now it not group days I updated my driver of latest vesion by the Device Manager in windows to the latest version still problem persists, I have to reinstall it

  Hi @eswar_krishna,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the wifi adapter. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.

  Troubleshooting wireless network and Internet (Windows 8)

  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 8)
  1. press Windows Key + C
  2. click on settings.
  3. click on change PC settings.
  4. click on network on the left.
  5. click on manage known networks.
  6. click on the name of the network.
  7. click on forget.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the Winsock Catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Not call explanation. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.