Broken wire Array makes no sense

I'm creating two two-dimensional table by decimate a table 1 d and then using the function array of build to create the table in two dimensions from it. Does anyone have an idea why it doesn't work? I think it should work. I did something similar to this (I don't have the multiplying by a scalar) and it worked fine. Help please.

There are several ways to do it, so here is a possibility. Who would take on a stamp? (I guess it depends on the height of the dot of your monitor).

(note that we only need to adapt to the "algorithm", not the terminals)

Tags: NI Software

Similar Questions

  • MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

    MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

    It does not start to the top, screen and hardware ok except belt disconnected.

    also can I sell adapter, brand new, never used. where can I sell?

    Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

    Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

    Try eBay for the adapter.

  • How to cancel the last update, it works better and makes more sense!

    before I upgraded to the nxt version, everything was more easy to use and MAKES MORE SENSE

    • Click Start
    • Click on Control Panel
    • Click on uninstall a program
    • Click Mozilla Firefox in the list
    • Click on the button uninstall
    • Make sure that you do not remove personal settings etc.
    • Install version 28.

    That's how I did it.

    HTH
    Jottum

  • Skype throws me when reply or call! Message makes no sense!

    When I'm trying to answer a Skype call or make a call on Skype I threw off Skype!  and told me to install the latest version of Skype... When I do this I tells me I already have the latest version and asks if I want to install an older version!  The messages make no sense!  How can I get it working again!  Gabrielle J

    It may be better for you, if you ask the experts of Skype in their own forums:

    Skype Support Forum
    http://Forum.Voxilla.com/Skype-support-forum/

    http://community.Skype.com/T5/English/CT-p/English?profile.language=en&ShowForum=5

  • Try to check the drivers after a month of simultaneous BSOD gave rise to a HUGE DMP, that makes no sense

    Related to: pilot - hunt down a bad driver to behave.

    Good evening to all!

    I tried to check the drivers on my PC after a large number of BSOD and my use of pilot check utility resulted in a HUGE file that makes no sense (to me anyway).

    Can someone help me out? Does make sense to anyone?

    Here is the file

    https://onedrive.live.com/redir?RESID=8d3f436a45192b45! 126 & authkey =! APJUkELvmCuxVPI & ithint = the file % 2cDMP

    IF

    This full dmp has no active auditor.  What were the results when you typed check/query?

    You should configure you computer for a small image, as described in this wiki


    Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

    If you have any questions regarding the procedure, please ask

    This phenomenon was linked to the corruption of memory and circumstantial evidence that the culprit was Malwarebytes.

    I activate the Auditor, remove the MMFA and use MSE in place at least for test

    http://www.Microsoft.com/security_essentials/

    I would also like to run a file system check

    Please run a check of system files (SFC) & DISM if you're on win 8 or higher 


    All instructions are in our Wiki article below...
    If you have any questions please ask us for .


  • AGAIN starts after only one physical disk has several partitions makes no sense to the production oracle database?

    Dear Experts,

    Don't + REDO1 diskgroup have only one physical disk has several partitions makes no sense to the production oracle database?

    For example

    • + Diskgroup Redo1 have 2 50 GB disks (fact these 2 discs are the same physical disk partitions OR these should be separate disk as recommended approach)?
    • + Diskgroup Redo1 have 2 drives of capacity 50 GB (for RAID 1 + 0)
    • + Diskgroup Redo2 have 2 50 GB disks
    • + Diskgroup Redo2 have 2 drives of capacity 50 GB (for RAID 1 + 0 )

    Thank you and best regards,

    IVW

    Hello

    Partitioning your disks for ASM configuration as 'A' might make sense. If you lose one disk, you have the discs to another.

    'B' totally make sense if you have lost the disc that you have lost all group ASM and you need to change this with something like 'C '.

    But obviously you need redundancy ASM configured appropriately.

    Kind regards

    Juan M

  • It will make any sense to create a view, materialized on the top one cube MOLAP?

    Hello
    We have developed a few MOLAP cubes for our environment considered.
    Now, we plan to create materialized with rewrite motion activated to speed up performance?
    Is this a good approach? It will make any sense? I want to say I get a performance improvement if I create MV at the top of a MOLAP cube?

    Thank you and best regards,
    Douglas

    Adding a MV rewrite does not alter the raw performance of a cube. The only reason to add - it is if you want to write your SQL queries against relational base tables and the database have rewrite your queries on the cube. If you are able to query the views of cube directly, so there is no particular advantage to a rewrite MV.

    Adding a refresh only MV has benefits even if your queries using views of cube. A refresh only MV following the lapse of the cube and allows you to run updates of 'fast', which can be useful if you are only changing a handful of lines in your fact table.

  • Report-exporter - time makes no sense

    Using vCloud meter use v2.2

    When I 'Browse' the detailed report of the use, the format of the time is 11 04:05, i.e. day 11 at 04:05. Logic so far.

    When I 'export' of this same report, time is in the format 1318266300358. How can I make sense of that?

    Also how is RAM billing it calculated? I have 16000 samples and each of the numbers of billing RAM is just half of the RAM to the virtual machine. Is there more than that?

    To test this, I added more vRAM to a virtual machine and RAM billing also doubled even if the virtual machine is not actually using the extra RAM more

    I need to build a VM and client billing report, which will be used to bill my clients. So I make sure I'm that becomes clearer.

    Noises of her I could just divide my vRAM by 2, then divide the total amount that I am charged every month and not even concerned the counter usage reports?

    The timestamp in the detailed billing report and detailed use is in ms since January 1, 1970.  Although export of the billing reports was not initially intended to be dealt with by the end user, you can convert the format of stamp of linux machine in a human readable format.  There are some examples on how to do it online depending on the application you are using.

    Also how is RAM billing it calculated?

    RAM of billing is calculated for each virtual machine in the collection, not at the time of the report.  Starting with version 2.1, billing vRAM was awarded vRAM based switch, which means that the virtual machine has been configured as, for booking vRAM based with a minumum of 50% reservation.

    A few examples:

    If the VM reserved vRAM is set between 0-50% of allocated, bills to a minimum of 50% usage meter.

    Example 1:

    Allocated vRAM: 4 GB

    VRAM reserved: 0GO

    Billing vRAM: 2 GB (min 50%)

    Example 2:

    Allocated vRAM: 4 GB

    VRAM reserved: 1 GB

    Billing vRAM: 2 GB (min 50%)

    Example 3:

    Allocated vRAM: 4 GB

    VRAM reserved: 2 GB

    Billing vRAM: 2 GB (min 50%)

    If the VM reserved vRAM are configured between 51 and 100% of allocated, bills to real rate usage meter.

    Example 4:

    Allocated vRAM: 4 GB

    VRAM reserved: 2.5 GB

    Billing vRAM: 2.5 GB (min 50%)

    Example 5:

    Allocated vRAM: 4 GB

    VRAM reserved: / 3 GB

    Billing vRAM: / 3 GB (min 50%)

    Example 6:

    Allocated vRAM: 4 GB

    VRAM reserved: 4 GB

    Billing vRAM: 4 GB (min 50%)

    If you use vCloud Director in your service provider configuration, please know the model of distribution of VDC which is used by your customers and understand Pay As You Go model of default allocation to 100% booked vRAM unless amended by the service provider.  What this means is that, unless changed, each deployed virtual machine will be clocked at 100% reserve vRAM and use of the virtual machine will be charged similar to example 6.

    Also, using the global billing report, make sure you enter the Cape by MV 24576 (24 GB) memory whose size limit that bills VMware against.  Customers can deploy larger virtual machines, but VMware caps the size to the accusation.  If there are virtual machines more than 24 GB, you would see a difference in the Total global VRAM and vRAM total billing where vRAM total billing would be less.

    Note: Column names can be terribly confused and we approach this more other customer feedback in the next release scheduled for Q1 2012.  Please refer to the GBA as vRAM Total total = Total billed without vRAM memory CAP and total billing = Total vRAM charged vRAM with memory of Cap.  Also be aware that the global billing report also has the calculation of vRAM booking already built since it was taken into account at the time of collection.  This report shows just gross GB use by license type for the month.  You will still need to factor in the number of hours in the month and by type of license points, but refer to you aggregators instructions on how to do it.

    How are you using the consumption meter to charge your customers back and you are not using vCenter Chargeback Manager?  The measure of consumption is designed for VMware for use of meter service provider and does not factor in other services and features allowing service providers to their customers?

  • BlackBerry Passport USB broken, how to make a backup of the contacts?

    Hello world

    USB broken on Passport, incoming device for extended warranty replacement, need to backup my contacts. Oh and the battery at 9% and does not obviously.

    Tried to Bluetooth, passport says that I need to enable Internet Tethering, but Internet Tethering says battery is too low.

    Tried by wi - fi, but not backup Blackberry link Wi - Fi (Blackberry Desktop on Windows 7).

    The USB absolutely does NOT work. When I plug it in with the original and oldest charger Playbook charger, the display cycles between charge/no display connected to once per second. When it is plugged into a Mac, the drive appears then disappears.

    Passport was soaked when I got caught in the rain. Recently updated passport to update to the latest OS10.

    Any suggestions?

    Thank you

    You can try InTouchApp for BlackBerry World contacts. It is very good for the backup of the contacts. Otherwise, if you saved your contacts in your email, then you need not worry, you can synchronize when you set up an account the next time. Good luck with the replacement!

  • New HP Envy notebooks confusing pricing makes NO sense

    Please help me give a sense of this:

    http://www.shopping.HP.com/webapp/shopping/computer_can_series.do?StoreName=computer_store&category=...

    Click on "customize and buy".

    Intel (r) Core (TM) 2 Duo SL9400 (1.86 GHz, 6 MB L2 Cache) w/512 MB graphics ATI Mobility Radeon (TM) HD 4330
    Included in the price

    Intel (r) Core (TM) 2 Duo SL9600 (2.13 GHz, 6 MB L2 Cache) w/512 MB graphics ATI Mobility Radeon (TM) HD 4330
    + $100.00

    Intel (r) Core (TM) 2 Duo SU9600 (1.6 GHz, 3 MB L2 Cache) w/512 MB graphics ATI Mobility Radeon (TM) HD 4330
    + $200.00

    So the slower processor with less cache is a + $200? What I'm missing here?

    Now for the hard drives:

    250 GB SATA HDD at 5400 RPM with Protection for hard drive HP ProtectSmart
    Included in the price

    160GB (Solid State Drive Flash Module)
    + $200.00

    160 GB SATA HDD at 5400 RPM with Protection for hard drive HP ProtectSmart
    + $899.99

    UH? So I pay 899 and in return, I get a smaller HDD?

    I am interested in this system, but the site is so damn I don't dare order.

    Message edited by thehig on 10/19/2009 15:23

    It seems that the changes to the Web site. They eliminated the errors and adding an option quick ship pre-configured.

  • How to disable the location In the URL bar, type about: config Type geo.enabled Double click on navigation geolocation geo.enabled preference is now disabled... makes no sense

    Please help, I want to disable navigation to the current location, thank you

    What is - this on changing preference geo.enabled to false, which is not supposed to?

    topic: config is an internal address that gives you access to the Advanced preferences / hidden in Firefox. Double-click will toggle a Boolean preference to his "other value. Now, which only affect "location awareness" which is determined by geolocation, not when your location is determined by your IP address.

  • Why is the broken wire in the program attached?

    See you soon

    XY graph is an indicator that you receive pallets of façade.

    Circuit of what you're saying?  If you're referring to your LabVIEW code, then this is a block diagram.

  • How can I get the laptop to read/use the modem when it is already connected to the server (if it makes no sense at all)?

    I was told that the laptop is not save the password.  I was also told that I had to upgrade to the pack 3 server instead of two.  I don't want to pay HP $100 for technical support on the phone or pay Microsoft $60 for the same thing.  I spent $ 200 for Qwest to Comcast with wireless capabilities, i.e. when the laptop stop working.  Any ideas?  I thank everyone!

    Hello

    Have you talked with Comcast? You may need to configure the router so that it function.

  • Makes no sense to me-multi-table INSERT alias

    small excerpt of the book, do not think that I needed to add many other things.

    So, what do we do? The solution is to specify an alias for column to all column names

    in subqueries that use a table alias, then reference it the column alias of the

    rest of the INSERT conditional statement, as we do in lines 5 and 6 below (line

    added numbers):

    01 INSERT

    02. WHAT (BOSS_SALARY-EMPLOYEE_SALARY < 10000) THEN

    03. IN SALARY_CHART (EMP_TITLE, SUPERIOR, EMP_INCOME, SUP_INCOME)

    04 VALUES (EMPLOYEE, BOSS, EMPLOYEE_SALARY, BOSS_SALARY)

    05 SELECT A.POSITION EMPLOYEE,

    06 B.POSITION BOSS,

    07 A.MAX_SALARY EMPLOYEE_SALARY,

    08 B.MAX_SALARY BOSS_SALARY

    09 FROM POSITIONS A JOIN POSITIONS B

    10. THE A.REPORTS_TO = B.POSITION_ID

    11. WHERE A.MAX_SALARY > 100000;


    Note that this version has done more than necessary and applied alias columns

    for each column in the subquery, then referenced by these column alias of the

    WHEN and VALUES clauses. We only needed columns on A.POSITION alias

    and B.POSITION in lines 5 and 6, so we can refer to the alias column to line 4.

    Whatever it is, this version of the INSERT conditional is syntactically correct.

    Uh, have we not need to alias column for lines 7 and 8, so... (as he shows)? Otherwise use table alisases for a.max_salary & b.max_salary on line 2. And using aliases table is not in the INTO s/WHEN is multitable inserts.

    Hello

    2776946 wrote:

    small excerpt from the book,

    What book?  View the full title and page number or link

    I didn't know that I had to add much.

    So, what do we do? The solution is to specify an alias for column to all column names

    in subqueries that use a table alias, then reference it the column alias of the

    rest of the INSERT conditional statement, as we do in lines 5 and 6 below (line

    added numbers):

    01 INSERT

    02. WHAT (BOSS_SALARY-EMPLOYEE_SALARY< 10000)="">

    03. IN SALARY_CHART (EMP_TITLE, SUPERIOR, EMP_INCOME, SUP_INCOME)

    04 VALUES (EMPLOYEE, BOSS, EMPLOYEE_SALARY, BOSS_SALARY)

    05 SELECT A.POSITION EMPLOYEE,

    06 B.POSITION BOSS,

    07 A.MAX_SALARY EMPLOYEE_SALARY,

    08 B.MAX_SALARY BOSS_SALARY

    09 FROM POSITIONS A JOIN POSITIONS B

    10. THE A.REPORTS_TO = B.POSITION_ID

    11. WHERE A.MAX_SALARY > 100000;

    Note that this version has done more than necessary and applied alias columns

    for each column in the subquery, then referenced by these column alias of the

    WHEN and VALUES clauses. We only needed columns on A.POSITION alias

    and B.POSITION in lines 5 and 6, so we can refer to the alias column to line 4.

    Whatever it is, this version of the INSERT conditional is syntactically correct.

    Uh, have we not need to alias column for lines 7 and 8, so... (as he shows)? Otherwise use table alisases for a.max_salary & b.max_salary on line 2. And using aliases table is not in the INTO s/WHEN is multitable inserts.

    It is true; you need an alias for at least 1 of these columns.  Each column in the query (lines 5-11), which is used elsewhere in the statement must have a unique name.  The query you posted called the columns in the result set

    employee_salary and boss_salary.   You can also use

    max_salary and patron of salary or

    employee_salary and max_salary, giving an alias to only 1 of the 2 columns, but they must have unique names.

    You're right on the table alias, too.  The scope of alias tables A and B is the query (lines 5-11).  Impossible to refer to A or B in lines 1-4.

  • The recommendation makes no sense for the SQL VM database

    I put my SQL 2008 VM to 4GB. Really nothing running on it except a database of IAAS vCAC empty.

    vRCop recommends adds vRAM to 18 GB.

    Remediation.PNG

    But if you see my use of memory at the level of Windows, it is only 1.xGB.

    Anyone know what is happening there?

    I use vSphere 6.0 and Windows 2008 R2 VM.

    WinPerf.PNG

    You have only one (1) datapoint. vROps is practically not useable with 1 data point, you collect data more.

    He thinks that memory is 0 KB, which should disappear if all is good on the environment abd become the real value.

    I assume that you already have, what is the current status?

Maybe you are looking for