Brother HL-2070N mono laser do not print and does not meet orders

Similar Questions

• Laser Jet 4500N disconnection and does not print

  I got a cable (mini centronics USB) to connect the printer to my mac OS x 10.9.5 via USB. This is my first time the printer connected.  I recognized the printer and installed. He has not been able to print an entire page.  When I select printer and print it Say "Sending data to Printer".  The window will then say "the printer is not connected.  Then I can unplug the usb on the printer and plug it in again and it will print some of the page. (it seems that it prints better if its only text and no image or ink.)  Sometimes, I have to uninstall the printer and install again.

  The pilot is a 19.8 for the printer?

  It is printing only about 10% of a page.

  It says at the top. Any idea here?

  ERROR: UNDEFINED
  OFFENDING COMMAND: @7NLD
  BATTERY:
  -DICTIONARY-

  As I print multiple pages the Offending command: changes. Here's more

  OFFENDING COMMAND: 6WjhI, T
  OFFENDING COMMAND: =:? E
  OFFENDING COMMAND: QN! QQ.c #RS',

  Any ideas? Thank you very much!

  @Marketqr

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).
  
  If you are not familiar with messaging private forum please click here to learn more.
  
  Thank you
  Omar

• HP P1102W does not print and does not open when it is connected through the USB port on the road

  I bought this printer and I set it with a fixed IP address. After a few months, he has simply stopped working. So I decided to connect to the console and I wasn't able to do it either. I printed the test page and the ip address is 0.0.0.0. I, then, tried to plug in the USB cable on my computer and the drive that contains the software, it does not appear. He is a second and then disappears.

  I would like to get a solution to this problem before I throw this piece of 'material' on the discharge.

  Thank you!

  The 1102W uses what is called USB wireless.  The installation of the printer is the only way to recover the printer on a network in this case.  There is no place to set the IP address without getting a DHCP address first, which is not the case here.

  First, retrieve the default network printer.

  Restore the default wireless settings.
  a. turn off the product.
  b. press and hold the wireless switch and the
  Cancel button and then turn on the product.
  c. hold the button until all lights flash in unison.
  and then release the keys.

  This should reset the default settings of the network.

  Then, uninstall all the software of the computer printer.

  Reinstall the printer from here click on software and Driver Downloads and select your operating system.

  It will take a computer on the same network and USB cable.  Click network installation and connect the USB cable when prompted.

• Printer HP PSC 2300v: HP Photosmart 2300v on Windows XP operating system does not meet orders

  Printer HP PSC 2300v all-in-one Windows XP OS does not meet all orders - not even to 'turn off '.  Only managed to do it turn 'works' by lifting the lid of the ink cartridge.  Already been installed & used for many years without any problems.

  Hello @Chiefyswife ,

  Welcome to the HP forum.

  I understand that your printer is not responding correctly.

  I want to help you with this.

  When the printer is on, unplug its power cord.

  Wait about 30 seconds.

  Reconnect the power cord.

  If it does not please let me know.

• I have changed ink in my printer HP F380 and now it does not scan printing and does not copy the computer off

  Also, I did a restore and do not know if something needs to be installed or reopened.

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• 32dv502b b & w DVD - disk in it does not meet orders

  Hello

  I have a 32dv502b with DVD black and white and when a disc is is it does not not at the controls in web Lord he Floorstanding svi01b201207 that I can t find anywhere.

  Can you help me?

  Do you use original DVD discs or some selfmade discs?
  Do you mean by svi01b201207?

• Mono Laser 2040 Brother printer model

  I have a brothers model 2040 printer laser-test page prints OK, the Task Manager lists the print spooler as Running-even I can not print a page of an Acer Aspire 5517 model Laptop.The number print top of page to the right of the page - and a file folder path printed at the lower left. I've been able to print okay, I don't understand what happened - HELP!

  Note that you have posted on the site of feedback answers, which is not the place to ask technical questions.
   
  That being said, let me suggest that you reinstall the printer driver on the laptop.
  
  --
  Stefan Blom
  Word Microsoft MVP
  (Message posted via community NNTP bridge)
   
  
   

  wrote in message News: * e-mail address is removed from the privacy *...

   

   

  I have a brothers model 2040 printer laser-test page prints OK, the Task Manager lists the print spooler as Running-even I can not print a page of an Acer Aspire 5517 model Laptop.The number print top of page to the right of the page - and a file folder path printed at the bottom left. I've been able to print okay, I don't understand what happened - HELP!

  Stefan Blom, Word of Microsoft MVP

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• Can you have configured USB and wireless printing simultaneously on mono Laser HP 1102w

  Hi guys / HP,.

  I was wondering if you have the configuration of p1102w printer HP mono laser for both cable USB2 cable to laptop and wireless at the same time.

  Try to install the printer with the two configurations via the installation on my HP Pavilion dv6 laptop CD.

  Because when you install the printer CD, he asked for one or the other i.e. USB or wireless.

  Y at - it an easy solution.

  Concerning

  Mike

   

  [Content removed]

  Hello

  You should be able to connect the two, but not Ethernet and wireless at the same time.

• HP Color Laser Jet CP1215: print - guard 'book light' flashing - printer stops charging of paper does not alter

  Hello!

  For about a week, I have the following problem with my HP Color Laser Jet CP1215: after 2-3 pages of printing, the device stops abruptly in the middle of a job and the light number 5 (paper) continues at the flashing light.

  However, the bin is full with paper.

  Ignitions and extinctions help only for another 2-3 pages, then printing will stop again as described above.

  Is there maybe a photoelectric cell that needs to be cleaned or a mechanical part that gives the status of bad paper from the paper tray to the printer?

  Thanks in advance for any help,

  Best wishes

  Herwig

  Hi @wigl,

  Welcome to the Forums of HP Support!

  I see that your HP Color LaserJet CP1215 printer stops printing when the print jobs. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I can see how frustrating it would be. To determine the cause, we need to use more than one document. Redundant that some steps may seem, I would execute all.

  Please, try the steps in this these guides:

  • HP Laserjet CP1215 and printers CP1217 - 'paper ' Error Message is displayed and the printer does not look upward or feeding paper.
  • The Paper Jam flashing on HP Color LaserJet CP1215, CP1217 printer.

  If the problem persists, try a hard reset:

  • Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  • Reconnect the power cable to the output of the printer and the wall, and not a surge protector. This ensures that the printer is full on and can help this situation.
  • Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• HP Laser Jet Pro M225dw MFP: HP E print App does not effectively bind to the Go Daddy email (HP Laser Jet Pro MFP M225dw)

  I bought a HP Laser Jet Pro (MFP M225dw) and am very excited about the mobile printing option. I downloaded the HP EPrint App on my smartphone (Samsung Note 4) and have successfully my gmail and hotmail accounts related.

  However, I have problems linking my Go Daddy account.

  As per a post on the forum of 2014, I have connected my Go Daddy via Outlook account, used the host name: imap.secureserver.net and Port: 143, SSL: WE. The account "seems" to link; However, when I click on my email Go Daddy Outlook icon, it brings back me permanently to the home screen, (the one that says "Photos, files, Web, Email") such that I'm never able to access really my Go Daddy email account.

  * No error message

  * Bluetooth off

  * 5.1.1 android

  * I have Norton Mobile on my phone

  * Looked at my Go Daddy security settings - no "two-step verification" or "allow the less trustworthy access apps to the ' questions

  Also, I see that this app is not able to print the body of an email; is there a way where information such as details such as email/recipient of the sender of transmission time, electronic mail may be included in the print job?

  Thanks a lot for your time and consideration!

  Hey @Lizaroo,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your Go Daddy email account settings enter the HP ePrint app. For more assistance, your best option would be to contact Go Daddy directly to check all the parameters of the post that you found are correct. Some e-mail clients change their settings often so that I wouldn't be surprised if the info you found is now outdated.

  Printing subject lines and headers, it is not possible to print. The reason is because many users are trying to print photos or documents. In the current situation, if a user were to send an email empty then the only thing that could print would be the attachment. This prevents clients a sheet of paper and the Ink/toner used to print.

  If you have the printer print senders and subject lines you can do so by having the sender to include in the body of the email. Another alternative is to set up an email address which is the sole purpose is to forward emails to the email address of the printer. This way if it is configured to include the information in the body so you will have those printed on the page. Also, this gives the advantage of having a backup of email messages sent to the address of the ePrint printer and if something should happen to the ePrint address, you can change the forwarding address that the email and no one would never know there was a problem.

  Please let me know if you have any other questions. If not, have a great week!

  If this solves your problems, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.

• Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

  I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

  Ideas, people?

  Hello

  This problem occurs when you make changes to the computer?

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  Method 2: Refer to this link: I can not print from my computer via the USB port.

   
  http://welcome.solutions.brother.com/BSC/public/us/us/en/FAQ/FAQ/000000/002700/000006/faq002706_000.html?reg=us&lang=en&c=us&prod=mfc7420_all&page=FaqEndPage
   

  If you have problems, I haveinstall updated printer drivers, see this link:
  http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

  Refer to this: update the drivers for hardware that does not work properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also: printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps!

• My printer HP laser still not connect to my desktop Acer Vista. Print spooler problem.

  My computer has recurring problem of Acer Vista vs HP1018 Laserr "print spooler". My man IT cannot set after 3 gos, and said I need a new computer (!). Nothing goes to the print queue (empty) when I print. I reinstalled the latest version of the driver via HP but nothing helped. Most annoying... Please help if you think that there is a way.  Aye, Dom

  Hi Dom,

  1. What is the error message exactly are you receiving on print spooler?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you run the Microsoft Fixit since article and if that helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  You can also see the following article for more information:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2: You can try running the following commands and check if the problem occurs and also to see if the printer comes back online after

  a. click the Start button, and type cmd in the box start search

  b. right click on cmd in the list programs and select run as administrator

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  c. at the command prompt, type the following commands and press ENTER after each one

  net stop spooler

  and then

  net start spooler

  This will stop and restart the print spooler service. If this solves the problem of the printer is offline, please let us know.

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

• HP Laser Jet 200 MFP: HP Laser Jet 200 prints wireless, scans of the printer, but not scan to the computer

  I can print wireless from my computer.   I can directly scan from my printer for paper output.   What I can't do is to scan from my computer (IE Word, HP SCAN...) in a document.    I was able to do a few weeks ago and know nothing of this happned to make change.

  Hey @AnnieCTX,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problem that you experience when you try to scan wireless since your color HP LaserJet Pro 200 M276nw MFP to your computer Windows 8.1. There are a few different things that can cause conflicts sweeping. There may be one occurring problem of connectivity, software, or between your computer and your printer driver. Therefore, when first troubleshooting I have to run the HP print and scan of the doctor tool. This tool will help us identify the problem and fix this scan. Can I please you follow the steps below.

  Can I have it please click here to download and run the HP print and scan of the doctor tool. This tool will run on your computer and 'set scan' questions for you. If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test scan using the HP scanning software to confirm if the problem is resolved.

  The issue of digitisation should persist, can you please clarify exactly what happens when you try to scan via the HP scanning software (error message, nothing opens, etc.)?

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!