Brother MFC-7420. Usually, it works on Windows 7, it will not print and I have to unload the coil and switch off the printer before Relighting.

I use a Brother MFC-7420. Usually, it works under Windows 7, but from time to time (maybe 1 in 20 times) he will not print and I have to unload the coil and switch off the printer before Relighting. It is not always the case, but it is enough times to be a nuisance.

Ideas, people?

Advertisement

Hello

This problem occurs when you make changes to the computer?

Method 1: Diagnose and automatically fix problems printing and printer

http://support.Microsoft.com/mats/printing_problems/

Method 2: Refer to this link: I can not print from my computer via the USB port.

 
 

If you have problems, I haveinstall updated printer drivers, see this link:
http://www.brother-USA.com/downloads/default.aspx?PgId=5&R3ModelID=MFC7420

Refer to this: update the drivers for hardware that does not work properly.

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

See also: printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

I hope this helps!

Tags: Windows

Similar Questions

  • After you configure the new printer Hp Officejet Pro 8625 on Windows 7, it will not print the page of 'test' I need help!

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    After setting up my new printer Hp Officejet Pro 8625 on Windows 7, it will not print the Page of 'Test '.  I need help!

    Also, when I roll over the image of the printer in the task bar, he says '0' of documents, so that it does not print.

    Thanks to everyone who responded to my help regarding my Hp OJ Pro 8625.  After all, I ended up doing a clean reinstall of my MS Windows 7, and reinstalling the Hp JO 8625 Pro software and that's all working now.  Some hoe there is a glitch in my Windows 7 that did not leave the Hp software to install correctly.  Once again thank YOU ALL!

  • printer Laserjet 1020 upgraded to windows 8.1 will not print PC HP Envy H8-1503

    Hello

    was wondering if anyone has problems printing of victory 8.1, used doctor HP printing and scanning and said everything's fine but a test page does not print as I can't print anything from another category windows 8.1. using windows 8 that I had no problem printing, I've updated all the drivers

    Also when I connect my laptop using windows 7 it prints, and with them turn off the printer laserjet 1020, then plug in the USB cable and windows 8.1 it will be printed.

    But when I turn off the 1020 laser jet, then turn it back on then try to print windows 8.1 that it will NOT print

    Thanks Mike

    Hello

    I understand that you can not print with Win 8.1.

    Drivers for win 8 and 8.1 Win are the two Version 9.
    Make sure that you uninstall the previous printer software.

    Here is a url to completely uninstall a printer in Win8.
    http://www.YouTube.com/watch?v=-M0GVVcwT-o

    Restart the computer.

    Reinstall the software of the printer again. Select full features software driver.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=439320#N173

    If you need more simply make assistance let me know.

  • Windows Vista update will not install and causes cell phone restart. Laptop will not reboot and Startup Repair cannot fix the problem.

    Windows Update tried to install 4 days now. Every time he tries it tells me it failed and trying to install in manually. He said then the laptop restarts, but it does not start. Startup Repair tells me that it cannot solve the problems.
    I don't know how to go beyond this problem, can someone help me? I have no disk Vista as it came pre-installed on my laptop. Help, please!

    If your Vista is preinstalled, ANY support for your laptop is the manufacturer of the computer, not Microsoft.

    Try this:

    Restore point:

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    If the above does not she, transfer your question in the appropriate Forum:

    Windows Update Forum:

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • my computer is Windows xp, my friend downloaded Windows 7. Will not that she should have uninstalled windows xp first?

    Uninstalling windows XP.   IHAVE virtually no memory, I have Windows 7 AND Windows XP installed on my computer, I even restore canmot back it won't let me. What should I do?

    What is now installed on the computer, Windows XP or Windows 7?

    It seems that your friend has made a custom installation of Windows 7 on Windows XP.

    Possible why you don't have any hard drive space, your personal files were moved to the Windows.old folder to the root of the hard drive.

    You can try the release of disk space by retrieving your personal files and delete the WIndows.old folder:

    How to speed up your Windows 7 system:

    http://techingiteasy.WordPress.com/2010/01/11/speed-up-your-system-for-the-new-year/

    You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

    http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

    Remove the Windows.old folder:

    How can I remove Windows. old folder?

  • Windows Media Player will not play music files - need to reset the file path

    I'm trying to access my music on an external drive (g) using windows media player. The player is looking for music in the E: drive, which is a separate external drive that my friend uses for its iTunes. How to reset the path to the file for windows media player? It gives me the possibility of rerouting individually paths files, but not a lot of re - routing. I have reset the default settings, reinstalled the drive external, even enabled/activated on WMP (of the Panel).

    I tried. The drive G:\ was included in the WMP library before this problem (and to make sure, I deleted and added it). Despite this, the paths for each song pointed toward the drive E:\.  I solved the problem by deleting all of your WMP library (not files) and restart the media player. The files were then reread with the correct file paths.

  • CC Adobe works on windows 10, nothing will not install correctly

    OK NONE of the applications will install properly on my windows computer 10 BRAND new. Support told me that I had to wait until Monday, so that someone who could help then disconnected from the chat session while I was responding. Is compatible with windows 10 CC of Adobe and should even bother trying to reach customers on Monday. Everything seemed to install, and then says that he has not completely installed.  When I reboot it looks like everything installed but when I try to open a first file that was created on another computer on my 2 month account, the system says that it cannot open the file because it was created with a NEWER version of first. It is not yet possible

    Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Windows XP SP3 will not install and repeatedly keep trying with Windows Update

    I've had two months of problems with Windows 7 and had to build a Windows XP machine. I installed Windows XP Pro SP2 on the clean machine and tried to install SP3 I had downloaded and put it on a CD. Installation backed up the existing files and install the new files. The installer said he was changing the registry. After that the installer said that there was an error, a file is not found. Then uninstalled and restored the old files. Keeps Windows Update downloaded a stream of updates (as you would expect with a clean install), but at the end of installation of the batch that is being updated is in SP3 update running. Whenever the SP3 update is executed, it gets to the same point, fails because it cannot find a file and UN-installs itself again. The indices of anyone? It's a real Microsoft Windows XP Pro out of the box, not an OEM.

    Hi guenoun,.

    The message I received installation of SP3 was "System cannot find the file requested" with no error code. As I was installing a SP3 at the start of a CDROM created from the uploaded image of CDROM I thought it was unlikely that the CDROM was corrupt or missing files. So, I went in Mode safe mode and use the account administrator. SP3 installed then OK (it took more time than installing Windows XP). I then checked the updates, and although Windows Update has been updated about 10 new updates flooded down. So problem solved. It must have been one of these security issues where be a user with administrative privalges was not enough.

    Kind regards
    Tony

  • Explore 9 and Windows Mail - Windows Mail emails will not print after installing Internet Explorer 9

    As soon as I installed explore 9 print not in my emails to windows messaging

    Hello

    1. what happens when you try to print e-mails through Windows mail, you receive error message?

    2. not this problem only occurs when you try to print emails from Windows mail or with applications?

    Step 1: Follow the steps in the link given below and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows?T1=tab02

    Step 2: follow the steps in the link given below.

    http://support.Microsoft.com/kb/973479

    Hope it will be useful.

  • Windows 8.1 will not sleep and error when restarting - DRIVING ME INSANE

    Hi guys,.

    Since the upgrade to Windows 8.1, my laptop never sleeps, now I updated the graphics drivers and it seemed to solve the problem but now it's back to not sleep well again and then just restarts my laptop and take 20 seconds or more to start again.

    When I wake my laptop Inspiron 15R SE 7520 after hibernation an error message with the blue screen "" thread_stuck_in_device_driver".

    All the drivers are updated according to Device Manager. I also left the HOMEGROUP.

    I just have no idea how to solve this problem and I just tired to try since the upgrade to windows 8.1! With windows 8, he wakes up from his sleep in 1/2 seconds... now nothing!

     

    Thank you

    Ravi

     

     

    Hi guys... good new

    I just managed to find myself a solution at LAST! : D (to do with 7730 graphic M AMD Radeon driver...

    I did a little digging around the internet and found this link:

    http://en.community.Dell.com/support-forums/laptop/f/3518/t/19477777.aspx

    that seemed to solve my problem!

    I only downloaded this link below and without having to reinstall what she just did everything for me by using site Catalyst Display Driver/software AMD.

    http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64

    My laptop now sleeps in the 2 to 5 seconds and boots to the top in the second now: D.

    I have Intel Graphics HD 4000 and AMD Radeon HD M 7730 installed on my Dell 7520 15R SE.

     

    It cannot help EVERYONE, but hey it's worth a try.

     

  • Windows media player will not open and play the videos uploaded on my gmail account but if I send email from my yahoo account.

    But if I send the email to my yahoo account, it will open and play very well.  I ran microsofts 'fix it' program many times without success. What could be wrong?

    Hello Tango6,

    Maybe your security software prevents this? What security software currently installed and have you tried to disable it temporarily?
    Given that this occurs only with your Gmail account, I'd be willing to bet that they have in place security measures to prevent reading straight out of email attachments.
    I would check here just to make sure that:
  • RPF update Windows XP (KB2686509) will not be insrall. It blocks other updates

    Windows KB2686509 update will not install.  Whenever I turn on the computer the update off again trying to install.  This lasts for several weeks.

    I use automatic updates which, for many years, worked perfectly.  This single update blocked can block all subsequent updates because I received advice from anyone else trying to install.

    Thanks to all those who know a solution.

    Bob

    See the RESPONSE messages in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c

  • Windows Photo Gallery is not print in color

    Windows Photo Gallery will not print in color, all other programs print in color. The cartridge made obvious, new color, printing preference etc. If I move the picture to a different file, i.e. MS Word, it will BE PRINTED in color. Am running Vista 32 Bit with 4140 HP all-in-One

    Hello


    Thanks for posting on Microsoft Answers.
    Try these steps and check to see if that helps:
    1. go to your desktop and make a right click.
    2. Select Customize.
    3. Select display settings.
    4. click the Advanced Settings button.
    5. click on the color management tab.
    6. click on the color management button.
    7. Select your display in the device drop-down list.
    8. click on my settings for this box from the device to use.
    9. click on the Add button.
    10. in the section ICC profiles, select sRGB IEC61966 - 2.1 profile.
    11. highlight this choice under the profiles associated with this device:
    section and click the set as default button.
    12. click OK several times until you're outside.
    13. restart your computer.
    Kind regards
  • Windows Media Player will not play. WMA files

    Windows Media Player will not play. WMA files, but all the rest that he will play codecs for.

    What is going on?

    Reset Media Player and accepted the default set and makes no difference.

    Still will not play. WMA files.

    This has happened on three different machines using hundreds of different. WMA files and none of them will play.

    All of these files were torn to the folder of music with Media Player.

    SFC/scannow seems to have done the trick for a user here. See:
    My Window Media Player won't play WMA files-Microsoft Community
  • Impossible to install printer Brother MFC 7420/7820 = in Windows 7

    I tray to install a brother MFC 7420/7820 for windows vista = printer on my new computer with windows 7 installed sistem, but nothing happens. Are the system close to compatibility and I need the driver for windows 7?

    * title - why my count (windows system 7) do not charge you Brother MFC 7420/7820 system windows vista =? *

    Download Windows 7 drivers here:

    http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/download_top.html?reg=us&c=us&lang=en&prod=mfc7820n_all

Maybe you are looking for