Brother MFC-J615W prints & scans through wireless computer, but not the printer itself, error tw006 comes up, how to fix this?
I tried for several days to get my Brother MFC-J615W do wireless... I am able to print and scan from the computer but not scan from the device MFC-J615W
"Unable to connect to the device. -If the device is OFF, turn on the device. -Check the I / F cable connection between the device and your computer. -If the device works on the other post, wait until the task is completed. [TW006]
Hello
1. you receive the error message only when you scan directly from the Brother MFC-J615W printer?
2. are you able to scan or print from the computer to which the printer is connected?
If the problem occurs only when you try directly scan at the printer, then I would suggest that you contact the support of brother about the question.
http://www.brother-USA.com/support/
Tags: Windows
Similar Questions
-
My Nano Gen 7 is recognized on a single computer, but not the other
My Nano Gen 7 is recognized on a single computer, but not the other. I went through all the troubleshooting tips. Different cables, try all USB ports, uninstall/reinstall itunes, etc. I have itunes more up-to-date software. I was able to connect the ipod to my backup computer and confirmed that I also have the software more up-to-date on the ipod. Since I am able to connect to it, I also did a factory reset the iPod, but it still wouldn't connect to my main computer. Nothing has worked. I think there must be a setting on my pc. I use the latest version of windows 10. Any suggestions are welcome. Thank you
I just bought an Ipod Nano 7th generation and itunes does not recognize it. Had by all the standard troubleshooting (uninstall/install itunes, etc.) and no luck. My PC recognizes, he calls the 'nano' but acknowledges as a USB mass storage device. I spoke to a support person from apple for more than an hour to help me troubleshoot it, finally they just said it was a windows problem, and I need to contact Microsoft.
-
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
whenever I shut my computer down I have to type f1 & esc to start, how to fix this?
Hi tonimiller1986,
· What is the number and the model of the computer?
If you are using a portable computer, make sure that your laptop battery is charged and/or the power supply is correct. If the problem is not with the power supply while the issue might be with the BIOS. You can get in contact with the manufacturing system to get the updated BIOS update or reset to default values and check if it helps.
Caution:
- Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.
- BIOS update should be made only if necessary (to solve a compatibility problem, for example). It can be a complicated process, and if an error occurs, your computer could be rendered inoperative. Be sure to observe the instructions of the manufacturer.
I hope this helps.
-
Clubhouse 23 HP: HP Officejet Pro 8600 is offline to a computer, but not the other
In our office network, we have problems with printing. We have several computers set up in the network and all print on the same printer, our HP Officejet Pro 8600. However, you can print from all except one. It reports an error in offline mode. Usually, rebooting the computer and the printer solved that problem, now, is not the case. I uninstalled the printer, reinstalled and it worked temporarily. I also disconnected from the network to the printer and the computer and reconnected them both. I have also shut down the computer, the printer and the router and restarting their router, printer, and then computer. I still have the same problem with just a computer. Any help would be greatly appreciated.
I solved the problem on my own. I had to remove all the devices on the network printer and reinstall on all devices.
-
I did a soft reset on my phone as I do from time to time when my provider has had problems since I have need of you reconnect and so on.
When she came back, on the screen was one of these application permissionmessages you get when you load on an application asking if you want to allow the application - in this case free Phonelocate to receive the sms_receive_messages? Nothing was unusual that come on except it would not turn off, it would not allow me to scroll or more of this message (or even in this post by the way), no calls cannot get through, no warning, no nothing. He is stuck on this message and I can't use my blackberry at all.
I tried to do a soft reset several times, tried to make a double soft reset, tried to take the battery for an extended period of time. I tried to connect to the computer to see if I could reload the OS and see if that would help, but while the computer and blackberry Device Manager it recognize the blackberry software is not and continuously says connecting until it times upward and asks me to try again.
I can't do a wipe handheld because it requires me to be able to use my phone and I can't.
So if anyone has any ideas I would be very grateful.
OK, the "last" to you may not be the 'last' to me, or others. But I know that you get to this screen if you can't go past the permissions screen when you start.
Try this, initialize the device a traction battery and when this permissions screen, press the ESC key once... that's the key to the right of the trackball. It should disappear.
midnightmadness13 wrote:
I have windows 7 64 bit and it is not at all recognize this command prompt. I have the latest OS on my bb.
There is no command prompt, just the path to follow in a directory of the folder.
Navigate to c:\program files\common research in motion\apploader and on Win7, in the apploader folder, simply click on "Compatibility files" to see if you see the file loader.exe.
No matter what?
If nothing yet, install BBSAK on your PC. You can use the function of cod 'remove' to remove the free phone app if you need.
-
Whenever I open the internet now, I get the pop up of the site (s04.cltdra.com) that keeps then open new windows. I've updated my system security, but without success.
Hello
-Did you change on your computer due to which the problem occurred?
-What operating system is installed on your computer?
-What web browser do you use?I suggest you to follow these steps and check if they help.
Step 1:
If you use Internet Explorer 8 with Windows 7, Open the Internet Explorer security troubleshooting utility and check if this is useful.
Step 2:
This could be a case of browser hijacking; Follow the links given below to delete the malicious files from your computer.
What is the browser hijacking?
-
Can access folder on a computer, but not the other
I have a vista computer that has a folder that I want to join. I have 2 computers newly built win7. I can access the folder on the vista computer with win7 computers only. I went through everything I can think of and all settings appear to be identical between the two platforms of win7. I took a peek in the management of the computer sessions and my computer with win7 I can't access it from is listed as a guest, not my user name. I have no idea why, all the comp have same login name, password and admin access. I have disabled guest accounts. It's the only thing I can find different between win7 computers which could explain why I can't access the folder in question.
Anyone know how I can transfer my network setting win7 rig with access to the other without, or fix everything that's wrong with my access rights so that I can get the folder I want? I can see the drives and folders that I shared. I can not open them, I get one you don't have permission to access this folder message. I have everything I can find associated with sharing turned on (except the password) and everything related to the firewall disabled is trying to access.
Thanks for the pointers you can give me.
Hi Dave68_31,
This could be a problem with the permissions of files and folders. The following procedure will help you change the owonership and permissions of files and folders.
1. right click on the file or folder, click Properties, and then click the Security tab.
2. click on Advancedand then click the owner tab.
3. click on Editand then do one of the following:
o to change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
o to change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
4. If you want to take ownership of the contents of the folder, select the checkbox replace the owner of sub containers and objects .
5. click OKand then click Yes when you receive the following message is displayed:
You are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
All permissions will be replaced if you click Yes.
Note folder_name is the name of the folder you want to take charge.6. click on OKand then reapply the permissions and security settings that you want for the folder and its contents.
For your Information
Ø an administrator can take ownership of any file on the computer.
Ø assignment of ownership of a file or folder can require that raise you your permissions using user access control.
Hope this has been helpful.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
My Wired internet connection works on a computer, but not the other.
I have a rope Ethernet connecting my cable modem to my laptop. When I plugged it in, it immediately connected my laptop to the internet. I took this same chord and plugged into my office. It connects, but I get a 'local only' connection and cannot access the internet. I tried all suggestions from windows to solve the problem. I reinstalled my network card. I played with all the internet options in Control Panel. How to make this work? It is clearly not the modem or the cable because it works on my laptop.
I am running vista on my desktop.Hello
Is that your desktop is configured to obtain an IP address from the DHCP server? Open the local area connection properties in your office and check the properties of the Protocol ' TCp/Ipv4. Be sure that this radio button for "obtain an IP address automatically" is selected.
Thank you
Girish
-
When I install Mcafee, the error come out, can not install... Make sure you only if your PC has JAVA script. error code: 0x80004005, HOW t ofix it?
Which version of Java should I download for my system to Windows 64-bit operating?
http://www.Java.com/en/download/FAQ/java_win64bit.XMLInstallation of Java
http://Java.com/en/download/help/index_installing.XML?user_os=Windows%207If you are using:
* 32 - bit Internet Explore (IE), you need to download Java 32 bits (check the browser)
* 64 - bit IE, you need to download Java 64 bit (check the browser)
* 32-bit and 64-bit, IE you have to download 32-bit and 64-bit Java respectively64-bit operating system Windows comes with browsers Internet Explorer (IE) 32-bit and 64-bit. 32-bit IE comes by default. There are different versions of Java software available for download depending on whether you are using THE 32-bit or 64-bit browsers.
Please note that the 64-bit Java is presented as a download option automatically for users of Internet Explorer 64-bit, as this is the only officially available for Windows 64-bit browser.
Note: Java is updated on a frequent basis, you can expect to see a Java update notification in the bar from time to time.
J W Stuart: http://www.pagestart.com
-
How do a default PDF file open the length of the page, but not the width of the full screen?
Acrobat Reader cannot change the parameters of the PDF document.
-
How to set up Windows Fax and Scan with Brother MFC-7440N printer/all-in-one
Hello, I'm trying to set up Windows Fax and scan using my all-in-one Brother MFC-7440N printer/fax/scanner.
When I go into the Windows Fax and Scan menu, I'm going to Fax > tools > accounts Fax. Then I select 'Add '. When he asks, I then select "Connect to a fax on my network server." But I don't know the name of my printer/fax/scanner when he asks "Type the fax server location."How to find the name?Help, please! Thank you!Hello
You can include the MFC-7440 printer named fax in the \\IP addressname of \\Printer' and check.
-
my brother mfc-j410w printer prints blank pages
my brother mfc-j410w printer prints blank pages... What can I do?
Hi vitavm9,.
· Do you remember all the recent changes on the computer before the show?
· This happens when you print with a particular application?
· What is the service pack installed?
· When you print preview the page what is the situation?
You can run the troubleshooter printer from the link below and check off the results: printing problems and printing errors: http://support.microsoft.com/mats/printing_problems/
With regard to:
Samhrutha G S - Microsoft technical support.
-
can I install a brother MFC 685cw printer if I don't have the cd?
Anyone know if I can install my brother mfc 686cw printer without the cd?
You can download the drivers and software from here:
-
How can I use my Brother MFC-5440CN printer in Windows 7?
How can I use my Brother MFC-5440CN printer in Windows 7?
Download the vista driver and software package complete withhttp://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/download_index.html?reg=us&c=us&lang=en&prod=mfc5440cn_all&dlid=&flang=English&os=74&type2=-1
Be sure to only install the driver before connecting the printer.
-
HP Photosmart 6510 series connects to the network and Internet, but not the computer.
Hey all,.
I have a desktop H8-1228 and 6510 e - printer. I got both products at the same time. I did the initial installation, and everything worked perfectly. I was able to print of my HP Touchpad (the printer was on the floor and my Touchpad was down.). Recently, I made a trip for two weeks. I turned off the printer. This seems to have been a mistake. Now, he will only contact my network and Internet, but not the computer. The Setup program keeps telling me that it is 'Impossible to find the printer' and that he wants me to check the IP address of the printer. I did this many times by printing the HP's Configuration Page from the printer screen. I also used Windows "Add a printer" without success.
I have installed and uninstalled the software several times; every time that remove the icon of the printer and the Standard TCP/IP port in the "Devices and printers" section in Control Panel. A few minutes earlier, I used Regedit to delete any reference to the series of HP Photosmart 6510 in the registry, believing that it could help my situation. There can be no. :-( I did the installation with the same problems that I had all the other times that I tried to install it.
No help from you the printer experts will be greatly appreciated. I'm not a novice as you can see. This situation, however, launched my posterior. :-))
Hi old_geekster,
You may want to enable disable all startup programs in msconfig until you are able to access the Web integrated printer server. It seems that there is something in the communication with the printer's operating system blocking. It will most likely software firewall or security related.
HP has designed a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity: The HP Print and Scan doctor. HP recommend you to download and install Print and scan doctor no matter what time you need to solve a problem with your HP printer from the link below.
I would like to know what are the errors you receive?
Maybe you are looking for
-
Scan to e-mail - by default - officejet pro more than 8600
How can I remove the default email that is automatically inserted into the line send when I initiate a fax in Control Panel? It is meaningless, it is filled automatically. Otherwise, I have to go to AddressBook and uncheck and then check the right
-
How to sync contacts from outlook with windows live
I have two addresses I can see together in outlook I have on my machine at home. If off, I go through msn.com via my laptop but can only see one at a time. However, the contacts that I have are set apart on outlook directly through msn. How can I fix
-
someone on this planet knows! XP home sp3 can use printer/sp2 vista home premium & files on a network private wireless, but not vice versa. Vista can see xp connected on the entire map, but can not do anything with the icon (it shows the IP etc. When
-
product key Windows Vista 25 characters
I want to reinstall Windows Vista on my system. I bought my Dell laptop in 2008 and got the CD of Windows Vista (English Hindi n) and the operating system Microsoft certificate, multicolored lable contains key product required to complete the operati
-
different accounts and restrict access to different local drives on the computer
I have three hard drives on computer m mobile to know the C drive, drive E D drive (the last two 180 GB each) I made two new accounts on my laptop... as a matter of fact, the initial report was account manager and the other two, lets say "acnt 1" and