Brother printer and the scanner does not work after Windows Update.

Similar Questions

• Internet and the sound does not work after uninstalling programs, System Restore also not work.

  I noticed that my computer felt a bit slow so I uninstalled a few programs that I knew were not very helpful so I restarted my laptop, and then the network and the sound does not work.

  I tried to use the system restore, but that does not work either and I tried to online solutions, but nothing works.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Satellite C50D-A-12 x - touchpad does not work after Windows Update

  the touchpad does not work after the windows updare

  I always recommend you read other threads / messages and spikes before considering opening new thread in the forum
  https://Forum.Toshiba.EU/showthread.php?82878

• Keyboard and the mouse does not work after the release of sleep

  Original title: error keyboard and mouse

  After you have installed Windows 8 I had problems with the keyboard and the mouse.

  If the computer disconnects a half our for example, when I come back, the keyboard and the mouse do not work,

  I can not connect and I have to restart my computer to the power button.

  How can I avoid this problem? It happens every day at least once.

  Hello

  1. you are using a wired keyboard or mouse and wireless?
  2. What is the brand and model of the PC?
  3. have you checked if other USB devices work on the PC after you resume the computer from sleep mode?

  I suggest you follow these methods and check if it helps.
  
  

  Method 1:
  If you use the USB keyboard and mouse, and then follow the steps below to uninstall and reinstall the USB controllers.

  (a) press the Windows logo and X from the keyboard.
  (b) type devmgmt.msc , and then press ENTER.
  (c) expand Bus USB controllers.
  (d) right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (e) restart the computer and reinstall the USB controllers.
  (f), check the question;

  
  Method 2:

  The 'USB selective suspend settings' option in the Power Options can be activated.

  (a) press X and WWindows logo and choose Power Options
  (b) click on change plan settings for the selected power plan
  (c) click on that to change advanced power settings
  (d) Expand USB settings and then the USB selective suspend setting and change them to disabled.
  (e) click OK in the power settings window, and then click save changes in the Edit Plan settings window.

  Method 3:
  If this does not help, I suggest to change the power to its default settings and check if it helps.

  You can follow the steps to do this:

  (a) press the Windows logo key and X set and choose power options.

  (b) under the preferred plans, click on balanced (Recommended).
  (c), click Change Plan settings and more balanced (Recommended) option.
  (d) click on restore default settings for this plan on .
  (e) click Yes to save the changes.

  Now check the issue.

  Let us know if it helps. If the problem persists, please answer, we will be happy to help you further.

• router Wireless does not work after Windows Update

  I have a router WRT54G V.5. Windows Vista Home Premium did an automatic update. Now wired connection works, the Wireless does not work. Ask key, but when nothing happens. Action of diagnoses has been canceled. I disabled and enabled, does not. Any help will be appreciated!

  Take not of the Settings (SSID and WEP/WPA Key) wireless router...

  Know the wireless settings follow this link

  Once you know the wireless settings are attempting to connect to your wireless network...

  XP:
  Click Start and goto the control panel and double-click on network connections, right click wireless network connection and click Properties.
  Now, in this window, click on the second tab of wireless network and give a check mark on "use windows to configure my wireless" and then delete all network names present in the preferred networks window. Then click OK...
  Right click on the wireless again network connection and then click View available wireless networks and try to re - connect to your network...
  Now, it will give you the opportunity to put the network/wep key, make sure that you enter the correct network key and confirm...
  It will connect...

  Vista:
  Click Start > Control Panel > Network and Sharing Center > manage wireless networks, here to remove any present network and close the window.
  Click on connect to a network and try to re - connect to your network, he must ask for your key/password network, enter the network and password correct key and click on connect...
  It needs to connect... Once you're connected, you must restart the computer, it needs to connect to the Internet...

• Wireless does not work after Windows Update

  Original title: Wi - Fi internet connection is DISABLED since yesterdays upgrade, how can I get that back on?

  Since a windows update yesterday, before closing my laptop... I am not able to access the Internet.

  My without wire is off and I can't turn it back on.  Toshiba wants $99 for technical support.

  Hi Sheryl,

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  Wireless does not work after a windows update.

  1. what day that was installed?

  You can check the update in the update history:

  See the Windows updates are installed

  http://Windows.Microsoft.com/is-is/Windows7/see-which-Windows-updates-are-installed

  2. do you receive any error messages?

  3. What is the model of the computer?

  The problem may be with the drivers or with the device.

  I suggest that you refer to the procedure described in the site:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Internet and the sound does not work after the ATU Vista 64-bit

  I really didn't want to display in the hope I would find the answer using Google, as I did in the past, but this one i can not find the answer for.   2 days ago I d/l a program called Advanced System Care. I was told by 3 of my friends it works well to clean your junk files, Defragging ect ect.

  After d/l and the operation of the program, I had to leave and shut down the system. Today I start everything is fine, and then I noticed that I have a red X on my speakers. This is not the red X you get when cut there a smaller lower-right next to the speaker in the toolbar. When I mouse over it, it says "Service Audio work not" when I click it to repair, so good it shows all is working (volume mixer control is non-interactive) then I go to control panel and click on the speaker and I get "this computer cannot play audio because the windows audio service is not enabled.»   You want to enable "I click Yes and it brings back me just in the region, that I was when I clicked on the small speaker in the toolbar with the red x.»  Everything always looks the same as it was when I put in place.

  Is there anything else I can look?

  Second problem happened at the same time.  I have the same red x on my 2 computer screen in the toolbar on the bottom right. When I try to repair it it says this "this service cannot be started because it is disabled or because it has no enabled devices associated ' when I go to Device Manager and check to see if it is still showing my d-link wireless there is black! on a yellow background. When I try to access the computer to find local internet connections, it says that it can't find. I know that my Linksys is working because my Iphone is connected.  I already tried to install a cord between my router and my system and it still does not notice the internet even when you try to reconfigure.

  I read where I can make a dirty windows vista installation and fix it. but I really hope that there is a better way.  I also tried to restore my computer to last week when I made a back up and it seems after the use of this program, that he got rid of that as well. So now im out with to be able to roll back before I D/L this close program useless lol

  I'm using Vista ult 64 bit, that the computer is built for gaming and music. OCed Q6600 to 3.2 4gig ram 8800gt 2 in sli on a configuration card XFX mother if any other system or other questions please do not hesitate to ask.  I hope that someone has had this problem and can help me to solve it.  I don't want to reformat my HD or what I really want to pay Microsoft to talk to them on the phone

  Thanks for your help

  After 3 hours on the phone with the microsoft problem solved. Seems some how using CSA and the update of microsoft it limited my computer to start all programs at startup.

• Epson v500 Scanner does not work after driver update!

  I recently bought a V500 photo and scanned my first 35mm using Epson Scan v3.7.4 negatives. The colors seemed off so I download and installed the latest v3.7.7 of support to Epson.ca hoping that it might help.

  Following the upgrade of the driver, the scanner has stopped working! Loads of Epson Scan, but after 5-10 seconds, I get the message: "no response from the scanner. Make sure the scanner is turned on and connected properly. If you use the transparency feature, remove the reflective document mat. »

  Then I restored the latest install w / restoring Windows but still could not get the job to scan. I drove back to the pre - Epson scan install date and tried to reinstall the earlier version but still no luck to get scanner work.

  I then followed the steps of uninstall on the Epson.ca support site removed all the drivers and the software with the scanner turned off and unplugged. Then I reinstalled the old version of Epson Scan of the CD because he had worked at the start. I reconnected it the scanner it plug it in and turn it on. But it still does not work! Ditto for uninstall and reinstall with the latest drivers.

  Notebook P7350 using Windows 7 32 bit SP1. Scanner is connected directly on the laptop, not through a hub. I tried all 3 ports USB in the hope one would work, but no luck. All connections between the pc and the scanner seem robust.

  Any suggestions to get scanner work?

  Thanks for the reply of adeline. In the meantime, Epson come back to me when I contacted them again but only after I have disabled cookie blockers in Firefox when visiting their support site. The first time I've done this, and the support form has not sent correctly.

  It turns out that the scanner must be completely turned off and unplugged then reconnected after that driver installed. I discovered one of the records was not too tight that it should have been :-0 if I was sure I had checked it earlier.

  Thanks again.

• Re: Satellite L500 - Wifi does not work after Windows Update

  The wireless on my Satellite L500 worked perfectly before you update windows. However, after the updat when you try to connect to a wireless connection, it says that "no connection is available.

  I then clicked on fix to try to find a solution. Then the message "the diagnostic policy service does not work. Using Ctrl + Alt + Delete I went on services and attempted to start the DPS manually, but the message "Diagnstic political service on Local computer started and stopped. Some services stop automatically if they are not in use by other services or programs. »

  This message puzzled me enough as it is said that the Wifi is infact on however in a attempt to FN + F8 F8 option does not appear. Any help would be greatly appreciated.

  Hello

  For Satellite L500, there are already some threads here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186764
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=178629
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=188577

  Additionally, make sure that the DHCP and DNS services are running. Type of startup is set on "Automatic" and try to restart both services.

• Help, INternet explorer does not work after windows update

  One day, the computer automatically downloads and installs the programs that are recommended by microsoft windows.
   
  After installation, my INternet explorer does not work.

  It reads:

  Windows could not access 'ie.redirect.hp.com '.
  Windows received an HTTP error message: 403 (refused).
  -> If this problem is consistenly prevent windows to connect to several sites on the Internet, contact your network administrator or your ISP.

  Then I click ok, and then try to go on 'www.google.com '.
  It still does not work, so I click on diagnose connection problems
  This time, it reads:

  Windows not found no problem with the network connection on this computer.

  You want to report the problem to Microsoft? Additional details about what went wrong can help create a solution. The report will be sent the next time you go online.
  Send information

  But when I send, I can not because I have Canon go online on my Internet Explore.
  When he first stopped working, I could use the system restore, but after a few months I dropped and now I can't restore the system to a place that it worked fine.

  I also know that this problem is not the administrator of network or something like that because I downloaded Firefox when IE stopped working, and Firefox works fine.

  I tried everything, but I can not do it by myself, so help please!

  @ceda only: See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Keyboard does not work after windows update

  The keyboard of my laptop S series suddenly stopped working after that she completed an update of windows. Another strange thing is that the wireless only turns off even when the laptop is turned off. Everything else seems to work fine except for two things.

  First thing I did was to restore the system back to before the update of windows, but nothing has changed. Then I tried to uninstall the keyboard driver then by restarting the computer, after which it automatically reinstalled the driver but the keyboard still did not work.

  Then I "refreshed" system, but nothing has changed then either. And finally, I reset the factory settings and for a little while, the wireless light turns off, but then he came back even if I had not turned on the laptop. (Update: I just changed the laptop and the wireless light disappeared so... If all goes well he will not return as a sign of improvement.) There was no change to the keyboard.

  Additional details on my laptop that may or may not have something to do with the problem:

  It is currently running Windows Pro 8 on a 64 bit system and is less than a year.

  I accidentally spilled tea really diluted on the laptop a month ago, but the laptop was working again fine until windows update a few days ago. There is no significant problem caused by the spill other than a few sticky keys who take off on their overtime and that the sensors of the keyboard backlight no longer works correctly.

  Any advice on what else I might be able to try to try to again take the keyboard in a usable state would be great.

  Hi rhel!

  If the keyboard still does not work while in the BIOS, then it means that you have here a hardware failure, and the only way to solve that is to have the repaired computer. You can visit this page to start the repair process.

  -Tim

• Qosmio F750 - touch buttons does not work after Windows update 10

  I use a laptop Qosmio F750 (PQF75A-02Y00Q).

  Installed on the computer the previous operating system was Windows 7 Home Premium 64-bit. Then, I upgraded the operating system to Windows 64-bit edition 10.

  As expected, this change would cause problems to appear. The thing that is really bothers me right now is that the touch of the keys in the top right of the keyboard do not work as expected.

  The buttons respond always if you touch them, but they do nothing on the screen. for the most part. When I touch the Volume Up / Volume keys down, they work as expected. However, the key Mute, the button Play/Pause, the Wifi key on / off and Mode (as well as the key to toshiba bulletin board) eco button do nothing.

  Curiously, when I manually turn eco mode from the power settings mode eco button again turns the green.

  My last question is, how can I fix this so that ALL keys work as expected?
  
  -----------------------------------------------------------------------------------------------------------------

  I noticed that the recognition facial webcam was funny things as well, but everything what needed to be done was to recalibrate the installation for that to make it work again.
  Curiously, all the FN key functions work well.

  In addition to the question in bold, there are all the other drivers should I install to improve/restore functionality to my laptop? As the page of Windows 8?

  Hello

  I have the same problem since update 8.1 and now after 10 update, even more I lost the 3d display function since I updated to 8.1.
  MY QOSMIO is PQF75E-F750

• new epson printer and the scanner does not.

  I have the new Epson SX438 printer, it does not analyze. Says it's not compatible with my pc. I have windows7 and he seems to think that I have windows xp 2 which was my old pc 2 years ago. I tried to uninstall and am about to give up.

  If you had a previous Epson printer did first uninstall you it via programs & features?

  You install this printer according to the instructions of Epson using the printer cd and connection only when prompted?

• Satellite M30-604 freezes and the fan does not work after replacing

  Satellite SM30-604. Laptop has left the mat from one day to the next and overheated! Fan won't spin and laptop start only occasionally. Thinking that the fan was fault I replaced the fan but even this new fan doesn't spin. The heat sink is totally clean - dust free inside the fins at all. The laptop is only 2 years.

  Cooling using forced (by sticking a nozzle of aspiration to the output of the cooling fan!) the laptop starts sometimes as normal until the desktop screen with all of the usual icons and no error message. But then, it does not further - the freezing of the screen, keyboard and mouse.

  Most of the time it does not start at all. When it does not start, the blue LED lights up but there is no hard disk activity or LCD at all - even the wifi LED lights even.

  Really grateful if someone knows what's going on. You are not sure if it is the main processor that is defective?

  Thanks in advance.

  Charlie

  Hello, Charlie

  As you know on this path is not easy to give an accurate diagnosis, but according to your assignment, I guess there is a complex problem and unit must be properly verified. I also think that there must be a problem with the electronics.

  It is really possible that the motherboard needs to be replaced but, as I already said, it is not possible to say something specific about your problem. Try contacting Asp and you will see what they say.

  Good bye

• Front to the Microphone does not work after last update 9.3.2

  My Siri worked around 26/05/2016 and I updated Memorial weekend. Since that time my front microphone has stopped working. FaceTime, dictated, Siri, voicememos are all just static sounds. But if I plug my headphones, it works very well. I tried something that does not promote Apple, but it was hopeless. I did all the trouble shooting and now awaits a chat representative to help me. This will be my second handset with Apple for the year and 1/2. My first iPhone 6 +, the screen no longer responds and they replaced the whole! Now, it's ridiculous!

  Any help, please! How can I get my FRONT facing speaker WORKS?

  iPhone 6 Plus

  iOS 9.3.1

  64GB

  I'm not sure what you have tried, but the simplest and the first line of defense in these matters is a reboot or a forced reboot:

  Restart your iPhone, iPad or iPod touch - Apple Support

  Aside from that, it COULD still be a hardware problem.  iOS updates can highlight potential problems/mismatches firmware in this mode. What is a refurbished phone?