Browser blackBerry Smartphones not working anymore after 2 years

Hello

I hope someone can help me with the following: after 2 years my internet browser no longer works on my BB curve 9300 (not via 3G, no WiFi). FB and Whatsapp still work.

Now my smartphone is only half of a smartphone, so I hope that your team of professionals will be albe to help me in no time.

Thanks a lot from the outset.

From what you describe, I can only deduct that the Service books never happened to your BB... and if you waited the hour and then restarted. And even then your services were not working.

Given this scenario, you next fall at what stage followed 3 in what I provided above... in touch with your mobile provider for formal support. Something went wrong turned into the connection between your device and your network of carriers... only they can watch their network to understand why this has happened and remedy.

It is true that, in many markets service BB/BIS costs indeed data plans more 'generic'... it's because there's infrastructure that the carriers and the BB must provide/support so that the exclusive services of BB to function. Non - BB devices don't use this infrastructure, and so in many markets the carriers can get away with paying more for it. But this price is set by carriers (not all markets have a surcharge for BB services... services of BB to sell at the same price as non - BB... it varies).

Good luck!

Tags: BlackBerry Smartphones

Similar Questions

  • Browser blackBerry Smartphones not fully loading

    Hello, I have a blackberry Torch 9800. My problem is that I can't watch internet on my phone easily. For some reason any that it shows only a part of the page, but there white boxes at the bottom of the block in training/photos/etc page. I deleted all temporary, audited files for the update software and even checked all the settings of my husband. (It has the same brand and model, its not done) Any help on this would be greatly appreciated. Thanks in advance!

    Hello and welcome to the community!

    I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... ( Please wait for this before moving on to the next step) :

    (1) registry HRT

    • KB00510 How to register a BlackBerry smartphone with wireless network
    • Please wait a 'registration' message reach your Messages application

    (2) Service reference books

    • KB02830 Send the directories for the BlackBerry Internet Service
    • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

    (3) restart to take batt

    • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

    I hope that will move things again for you! If this isn't the case, then I recommend that you try to start safe mode:

    • KB17877 How to start a smartphone BlackBerry in Mode safe

    It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, thinking... what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

    Otherwise, you may need to consider a feature complete WIPE, a reload of the OS, or even a WIPE/reload BBSAK.

    Good luck!

  • BlackBerry Smartphones NOT WORK - Timer in the clock function

    My timer no longer works... I'm going to set the hour and press start and it goes straight to the "done Timer" and jumps at 00:00:00

    I did a batt pull too. No help.

    It worked once, but not anymore. I have the OS v4.7.0.75

    Any ideas?

    I had this same problem.  It appeared to start (timer stop working) when I tried to install some 3rd party applications supported.

    The process of recovery for me was to erase the Organizer.

    I conncected first BB storm to my computer.

    Launch the Blackberry Desktop Manager

    Click the backup and restore

    Click on the backup on the backup device.

    Once the backup is complete, on the device, go to Options, Security Options, General settings.  Press the "berry" on the device, select "Wipe Handheld".

    There were two options where I could choose the wipe type I wanted.  I chose that one would have left my only applications installed.

    When the erase is complete, connect to the computer and run Blackberry Desktop Manager and perform the restore operation.

    In my case, before I did the restore operation, I checked the timer to see if it worked (it was).  After the data is restored, it still worked.

    Hope this helps... Sorry this is a long post.

  • BlackBerry Smartphones not receive emails after passage of the BB 8820 to BB "BOLD"

    I just changed my 8820 to "BOLD" bosses.  Do you have the switch using the software via his computer and all the news switched to fine.  Take out SIM card the 8820 and placed in the "BOLD" and everything still seemed to work properly.  It's been about 12:30 and 15:50, she called to tell me that she had not yet received a new message of electronic mail on his "BOLD".  It takes awhile to kick service?  Was it something that I had to "turn on" to allow him to begin to receive emails?  She is just using an AOL account...

    Hi and welcome to the forums!

    You or she log in the BIS site and change the pin code of device for the account?

    See the attached procedure for the BIS site. Let me know if you need the

    BIS Web site for your / his carrier.

    Thank you

    Bifocals

    Page 39

    http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/8067/645045/788117/1166305/1...

  • BlackBerry Smartphones not receive emails after traveling to THE

    My boss went to Los Angeles yesterday and could not send or receive e-mails when she landed here.  She has a full signal and everything else on the BB seems to work fine.  I went to the site where you check the e-mail address and the password for the BB and it is all set up.  Any suggestions?

    You can try to register new device

    Go to menu, options, advanced options, host routing table, press menu again and sign up now.

    After that reboot the device, remove the battery for 30 seconds, to check if the mails are coming.

  • Flash Player not working anymore after the reboot

    Hello and much apreciated if you can look into that.

    I need to install flasplayer everyday to make it work.
    What is very strange, because in the sys32 c:\windows\system32\macromed and syswow64 c:\windows\system32\macromed folder all the files are there.
    But for some unknown reason, they do not have to work.

    I tried to set the permissions for the OCX files in both folders, but that had no effect either

    If you could help me much apreciated, since reinstalling every day can get pretty boring.

    Yours sincerely,

    DiamondCore

    At the bottom of the page Install Clean are links to installation offline programs.

  • Custom reports do not work anymore after the upgrade (APP-FND-00362: Routine afpbep can not execute the query)

    Dear all,

    Recently move from 11i to R12.2.5 on OEL7 with database 12.1.0.2

    I'm getting below error when you run the custom program.

    APP-FND-00362: Routine afpbep cannot run the APPLICATION asks for program & PROGRAM, because the BASEPATH & environment variable is not defined for the application to which belongs the competing executable & EXECUTABLE program.

    Stop concurrent managers. Set the basepath for the application environment variable. Restart concurrent managers. (VARIABLE =)

    Systematic AFPEOT cannot build the name of an executable file for your concurrent request 737552.

    Check that the file name components are correct and valid on your system. Check that the environment for the person who started the concurrent Manager

    I tried to add entries in adovars.env, as below...

    CUSTOM_TOP = < path >

    export CUSTOM_TOP


    Bounced A services CM, still getting the same error.

    Please provide your valuable contributions to solve the problems more far.


    Kind regards

    Kirushna.

    Yes, change the value, bounce the CM and then check.

    Thank you

    Hussein

  • Y570 fan does not work best after 2 years

    My Ideapad y570 is over 2 years old and large. The only problem that I've faced these last 6-8 months is when I start playing games and the laptop overheats and stops.

    The fan speed is set for an effective Heat Dissipation and this mode is perfect for keeping the freshness of the laptop. Lately, the temperature rises to more than 90 + and therefore the laptop stops. Since last week also the fan started making a few strange mechanical noises a gear stuck.

    I cleaned the fan to ensure that there is no dust in the Panel or the blades. Don't you think it's time for me to get a new fan?

    TIA!

    Assuming that your laptop is out of warranty I would recommend repadting the CPU and the GPU. It will also give you a chance to clean the radiators. I found two videos that could help you. Links below. Watch them first and then decide if you feel enough confidence to do it yourself. It's not rocket science, but there is always a risk of breaking something. Just take your time.

    www.YouTube.com/watch?v=7tE_i91q5vw

    www.YouTube.com/watch?v=3_zlTL_ywSQ

  • My new orkut page doesn't work anymore after uptading firefox Firefox v9.0.1 at 10

    My new orkut page not working anymore after I in v2.1 this morning my browser firefox Firefox v9.0.1 at 10. I'm looking for this version mozilla Firefox v9.0.1?

    You can get it here:
    FTP://FTP.Mozilla.org/pub/Firefox/releases/9.0.1/

    The problem is Orkut incorrectly detects FF10, there is a bug filed here:
    https://Bugzilla.Mozilla.org/show_bug.cgi?id=720179

  • Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

    Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?

    You can restore the zoom feature by changing the related values of downtown on the topic: config page.

    • Browser.Gesture.Pinch.in -> cmd_fullZoomReduce
    • Browser.Gesture.Pinch.in.Shift-> cmd_fullZoomReset
    • Browser.Gesture.Pinch.out-> cmd_fullZoomEnlarge
    • Browser.Gesture.Pinch.out.Shift-> cmd_fullZoomReset
    • Browser.Gesture.Pinch.Latched-> false

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

    • Use the filter at the top bar of the on: page config to more easily spot a preference.
    • Preferences that have changed also show "BOLD" (user set).
    • Preferences can be reset to the default value using the context menu if they are set of users
    • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)
  • 4340 proBook s: 4340 Probook s camara doesn't work anymore after upgrading WINDOWS 10

    Internal to the device doesn't work anymore after upgrading WINDOWS 10.

    All the drivers are up to date.

    I also downloaded the HP device drivers, but they offer several types.  I don't know what device to install.

    Also, I don't know what I can do.

    If someone can help me...?

    Thank you.

    The problem is resolved.

    Not in the way I wanted to (using the internal camera), but I bought an external camera.

    It works without any problem.

    So for me the problem is resolved.

    Thank you for given applications.

  • Automatic update does not work anymore

    My problem is that automatic update does not work anymore and when I try to next turn to the I get some really long file name is missing. I can not down load and reinstall Security Center because it will not only because it is included in Vista. I can't load it updates as the software that is designed to do this does not work. I can't copy and paste the error message due to the fact that I am not given the choice.

    Is enyone knows how to get around this problem.
    The message I get is that Windows does not find:-': {26ee0668-a00a-44d7-9371-beb064c98683}\5\::{36eef7db-88ad-4e81-ad4...     I think that there is more than that, but it does not fit in the window.

    I am running Vista sp1

    Ian Robins, what are the errors that you receive with this procedure? What step gives you access denied? You can attempt to acquire the files listed for a known working machine, but let us try the following:

    It is a simple procedure of rearmament and included are the steps to paste the result of the command prompt, so we read what it gives you:

    1. Click Start and type cmd in the box start the search.
    2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. At the command prompt, type the following command and press ENTER:

    net stop wuauserv

    net stop bits

    net stop cryptsvc

    Ren %systemroot%\System32\Catroot2 Catroot2.old

    net start cryptsvc

    Ren %systemroot%\SoftwareDistribution SoftwareDistribution.old

    regsvr32 c:\windows\system32\wuapi.dll

    regsvr32 c:\windows\system32\wuaueng.dll

    regsvr32 c:\windows\system32\wucltux.dll

    regsvr32 wups2.dll

    regsvr32 c:\windows\system32\wups.dll

    regsvr32 c:\windows\system32\wuwebv.dll

    net start bits

    net start wuauserv

    net start Eventlog

    1. Click the icon in the upper left of the window, click on edit, then click on select all, press the Enter key.
    2. By pressing CTRL + V on your keyboard to paste the content in your response.
    3. After a validation or record your response, close the command prompt and restart your computer, and then test Windows Update again.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • "Browser" button does not work

    So useful to someone, here's how I solved this problem.

    Facts: Since the FF27, I couldn't choose where to download a file, or send a file because the "browser" button would not work.

    On the update of Avast program, I stopped "Avast Secure Line" to take (thanks to my firewall Outpost) and then FF started working fine again.

    I was surprised because I had already tried all help given including FF running two Avast with Outpost arrested without success.

    I hope this can help. All the best

    Hi Phil24,

    Thanks for the tips, very useful!

  • On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox

    On another PC I want to save my favorites, but my browser Firefox does not work how can I make the backup, before I reinstall Firefox.
    Firefox cannot renew its tabs and now won't run and let me do a backup

    This may be considered to be solve my problem.
    I decided to uninstall the rogue program Firefox download and reinstall the same version (No. 8). I used Windows XP Add Remove programs who asked if I wanted to save the settings of Firefox until I uninstalled Firefox. I said yes and operated with the uninstall. I couldn't find a Firefox 8 so I went for the 12 version and installed on the laptop. This version 12 now works with all the passwords one favorite of the uninstalled 8.
    Thank you for all your help and advice.

  • PA4293E-1HN0 HARD disk not working anymore

    Hello, my hard drive has worked several times but not working anymore on my PC

    PA4293E-1HN0
    Toshiba series DT Desktop 3 to, SATA 6 Gbps

    Series: DATA STORAGE 3.5 SATA HARD DRIVE 3 TB [table]

    I am on Windows 7, I tried another hard drive on my PC, this one worked just drive hard toshiba

    I tried to re installed Windows because it is perhaps a problem with the registry, but I have this error code: e0000100

    The question is: the BIOS recognizes the HARD drive and it is possible to access or to format the HARD drive...
    If the HARD drive is not recognized by the BIOS, then the HARD drive is faulty and must be replaced.

Maybe you are looking for