Browser crash, restart on its own, can not do the system restore. Help!

Similar Questions

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• can not get the system restore to work

  tried to get the system restore back to an earlier time. says I need to get rid of the useless programs.did who. I have also some icons for files, tools or downloads

  In addition to what has been mentioned, consider the following:

  First of all, what is the last time that the restoration of the system worked?

  Check your system restore settings:

  1. Click Start
  2. Right click on my computer
  3. Click on Properties.
  4. Click on System Restore
  5. If system restore is enabled, the column status of a player will show surveillance.
  6. If not, you can delete ""disable the system restore on all drives ' and then click on OK to activate "

  Is both as soon as you try to restore to the most recent available? If so, unless you have specific reasons to keep the previous restore points, clean the rest, so that you have the most recent restore point on the left.

  To do this:

  1. run Disk Cleanup

  2. click on more Options

  3. under system restore, click cleaning of

  4. click on OK

  This will free up the space. System restore needs a minimum of 200 MB of space to work.

  Reference: http://support.microsoft.com/kb/300044

  Hope this helps

  Post back if necessary

  _________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Can not access the system restore.

  After the removal of a virus, no visible icons on desktop except Mcafee on the toolbar at the bottom.  Was able to access the internet by clicking on Mcafee and then update.  When you click Start the only visible program is Mcafee.  Cannot see the control panel or Windows help/support or anything else.  "Run" is not available.

  Someone suggested that if I run the system restore, it could solve the problem.  But the problem is that I can't access it in the usual way.

  Hi Oishi Kuranosuke,

  ·         Are you able to access the system restore in safe mode?

  ·         You get the error message?

  System Restore can bring back the virus.

  Follow these methods.

  Method 1: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 2: Create a new user account.

  How to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If the problem is resolved in a new user account, and then follow the article on how to fix a corrupted user account.

  How to copy data from a corrupted to a new profile in Windows XP user profile

  http://support.Microsoft.com/kb/811151

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  Hello

  Can someone help on this

  CPU0:0) NUMBER: 706: can not start the system as a real NUMBER. Start with 1 false node (s)

  I just installed esx 4.0 update, one under vmware workstation and get this error

  Try to do this:

  Client-> ESX vSphere / vCenter-> left click on the ESX Server-> Configuration-> advanced-> vmkernel.boot.usenumainfo-> Vmkernel-> uncheck the box (this may require a restart if she does not take effect immediately)

• Windows95 CD-ROM - game Need for DCC Speed-No. pieces found - can not install the game - please help. ___

  Windows 95 CD-CD-ROM-game Need for DCC Speed-No. pieces found - can not install the game - please help.

  ------------------

• I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  I can't do the system restore and I have nothing on my "All programs" button, which means that I have not accessories, System Tools, etc. How can I get that back?

  Hello CalebCox,

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  This problem can be caused due to infection by the Virus. I suggest that you run a virus scan on your computer using Microsoft Safety scanner and check if you have the same problem.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Check if you have the same problem in the new user account.

  You can refer to the link below, which will give you information on how to create and configure user accounts in Windows XP

  http://support.Microsoft.com/kb/279783

  If works, you can copy data to the new user account:

  http://support.Microsoft.com/kb/811151

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• I can not access my system restore.

  When I click on the system restore, nothing happens. It is not on my Add / Remove programs. What can I do to get it back? Thank you.

  System Restore can be run in normal mode or safe mode.

  It is not located under the Control Panel Add/Remove programs.

  Instead it is located via the button start > all programs > Accessories > system tools.

• Can not find the CS6 offline Help file

  Hello

  When I try to open the help file from Dreamweaver CS6 clicking on help in the menu help or F1 Dreamweaver opens the site http://helpx.Adobe.com/de/Dreamweaver/topics.html but not the help file in offline mode. I can see that the Adobe Help application is started, but it stops after a few seconds. How can I open the CS6 offline Help file? Why help the Adobe application ideas stops after a few seconds? Thank you for your help.

  Concerning

  Here are links to documents for all applications of the CS6, in PDF and HTML format:

  http://blogs.Adobe.com/premiereprotraining/2010/08/help-documents-for-Creative-Suite-5-PDF-and-HTML.html

• I have Microsoft XP 3 package and some how I lost the ability to restore the system. How can I reinstall the system restore on my computer please?

  I have Microsoft XP Package3 and somehow, I lost the ability to restore the computer to an earlier date. How can I reinstall the system on my computer restore it please?

  Thank you.

  Santosh Mathur

  E-mail address is removed from the privacy *.

  Help us understand what "I lost the ability to restore the system" actually mean for you...

  Are you unable to launch/open the system restore?
  Are you unable to create a new Restore Point manually?
  Your system restore calendar is empty dates?
  You preform a restore and get a message that has failed or nothing has changed?

  If the restore in safe mode will not do, keep reading:

  It would be useful to know a few things about your system:

  What is your system brand and model?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

• How can I recover the system restore

  I've lost the system restore! How can I get this back, please help me.

  Hello

  1. What exactly do you mean by you have lost the system restore?
  2. What happens when you do the system restore?
  3. You get an error message?
  4. How long have you been faced with this problem?
  5. Remember to make changes to the computer before the show?

  I suggest you to consult the following articles

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  How to turn on and off on system restore in Windows XP

  http://support.Microsoft.com/kb/310405

• Can't do the system restore

  I had problems with printer (what else is new?!) for the last 2 days. It will print the test pages, but something else, that I try to print I only get a white paper that passes through. I contacted HP, after all, trying even uninstalling and reinstalling, but nothing has worked. I thought maybe I could do a system restore on the 15th, but I get a restore without success. There isn't any number of error message just a short message saying that it was impossible to complete the restore of the system. I've never had this problem before and I am really frustrated! Help!

  Thank you

   

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Printer problems:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

  Solve information problems the printer at the link above.

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  There is a very useful 'Fix - It' there as well as a list of what it fixes.

  http://support.Microsoft.com/kb/2000007/en-us

  Solve printing problems by resetting the print spooler

  I hope that the information above solves printing problems you encounter.

  See you soon.

  .

  Mick Murphy - Microsoft partner

• X 51 R3 is beginning not after the system restore

  I had my Alienware X 51 R3 since January, and she did great until last month when whenever I tried to go to my history on Google Chrome, it would go to a screen saying that it needed to restart.

  I decided to do a system restore but never finished restoration, that my computer just went to a black screen.

  Now, whenever I try to start my computer all I get is the Alienware logo and the points of rotation, it will be glitch at halfway thru the initialization of the process and continue with the points of rotation, then the screen goes black.

  Any ideas how to fix?

  www.techbout.com/.../

  The link above has all the options for this problem.

  Just click on the link above.

  I hope this helps.