BSOD after 1 hour of computer use

Recently, I've been doing the dreaded blue screen of death on my computer. I use XP SP2 Edition.

It occurs usually after 1 hour of use on the computer, a message appears and it restarted the system has recovered from a serious error by saying so please inform microsoft this problem. A log of this error was created.
What can I do?
Help!

Generally?  N °

Of course - you may lose files with this question - so everything is possible.  ;-)

That's why everyone who works with computers always harps on 'backups backups backups'--> after all, you have the opportunity to go back and get something that has been lost destructively in other aspects of life again to the * exact * same State?

Service Pack 3 (SP3) was released more than three years ago: April 21, 2008.  Support for Windows XP without SP3 ended July 13, 2010.  If you download the SP3 installed, you will get some other updates that you really need - maybe 90 + of them.

It's probably best you cleaning the computer some before attempting an installation of service pack 3.  Time - this will take, but in the end, you should end up with a much more stable and secure system - faster than ever possible.

In the order shown, do not jump...

First of all - download, install, operate and put to update and then run a full scan of the system with the following two (one at a time, reboot in-between):

After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)

Reset.

Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)

Reset.

and...

Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

Close all Internet Explorer Windows and other applications.

AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

Reset.

Now reset your Windows with this FixIt components update (you will be * not * do the aggressive version):
How to reset the Windows Update components?

Reset.

CHKDSK
How to scan your disks for errors* will take time and a reboot.

Defragment
How to defragment your hard drives* will take time

Reset.

Download Windows XP SP3 and save it to your desktop.

Double-click on the downloaded file and follow the prompts to get SP3 installed.

Your question may or may not be resolved after all that cleaning - such that it could even be hardware related.  Assuming that it is a desktop computer, when was the last time you picked up the machine off, bought a few cans of compressed air and opens the case and the breath in the dust?

Tags: Windows

Similar Questions

  • Contact ID forget the fingers after 12 hours of not used

    So I had my parents a nice Air 2 iPad with cellular data, a very good product.  The three of us each added that a finger and touch ID worked incredibly for several hours.  However the next day it would not remember neither my mom or dad.  He remembered my thumb, but then that stopped working a few hours later.

    We each added a finger several times.  However, the model is the same.  The Touch ID forget our fingers after about 12-24 hours of not used.

    My brother seems to have no problem with his iPhone 6s.  Its feature is also running iOS 9.1.

    I conjectured that perhaps the problem was that Touch ID did not like several people using the feature to unlock the device even.

    Anyway... now that I have, exclusively, have been using my new iPad (cell) Pro my theory is different.

    The drawing is the same... Contact ID works fine immediately after the addition of a finger, but overnight stops working.

    My current theory is that it works better with the phone and iPad because iPhone users tend to use their devices more continuous than iPad users.

    (at least my parents and myself) iPad users often leave the unused and locked iPad for 12 to 48 hours...

    I think that Touch ID requires frequent use to recycle permanently for the fingers "added".

    Maybe, maybe iOS 9.1 is bug in what concerns the contact ID.  Perhaps a future update may solve the problem.

    Or maybe, simply the cell iPad version has this issue.

    All things considered, I'm not discouraged by these products that they are worth every penny.

    FaceTime with iPad Air and Pro is an amazing experience.

    I submitted comments to Apple: https://www.apple.com/feedback/ipad.html

    I encourage anyone with direct problems nicely their concern to the page your comments...

    One of you, iPad users have good advice?

    Hi Camino fan 2010,

    If you encounter a problem with the contact ID not working not not always on your iPad, follow the steps in this article to troubleshoot issues - ID use Touch on iPhone and iPad.

    Specifically the section for help with the contact ID.

    Thank you for using communities of Apple Support.

    Sincerely.

  • Tecra A4 has stopped working after an hour

    I buy a Tecra a4 and it stopped after an hour labor.
    Using the keyboard or the mouse to restart did not work
    I have to use the power button to shut down and restart after stop down.

    Y does it have that someone could help me fix this problem?

    Maybe overheating problem?
    When you use the laptop? You have enough free space around the laptop for a good air circulation?

    Please also check the fans. If there is dust and debris inside modules cooling so you could try to clean with the vacuum cleaner.

    But generally, if the warranty is valid and the laptop is new so you must take the warranty and contact Toshiba service partner in your country to control the laptop.

    PS: A question: have you used the Toshiba Recovery CD? If this isn't the case, then do it!

  • After several hours of time, BSOD and it asks to run without failure or normal screen mode

    Hello

    I had this problem for a month, after 1 to 10 hours from the time of execution (occurs to me after an hour or half a day)

    my computer hangs just to the page black screen in safe mode, no errors or anything, even when I run back normally.

    Ive been looking around for quite a while now, try bugs from various websites and suggestions.

    I type of major changes to the system that I did the last half a year.

    Accident can happen in playing a game or even your browsing Firefox. Maybe she took place even though I did not use the computer, came back, and it was restarted. Things I suspect is either faulty RAM, perhaps poorly applied thermal paste on the CPU fan cooler? The two monitors that I have connected? Insufficient for new updates that are listen below cause the PSU stress itself? Tests I've tried on the stress after an hour of running time, I can not stress just before the cause of the accident that I don't know when it will happen. May be peaking suddenly what related material.

    More news a few months (more) I installed a Neovo 19 "F-419 19 inches in addition to my SAMSUNG 24" syncMaster B2430L display screen:, my main one is the 24 "one.

    New its add-on card: using an extra sound card that works OIC Configuration Audio-3D, 3d Audio Engine: Xear3D, Audio CODE: CMI8738, worm 7.12.8.1740. Looks like an old, I tried looking for program updates but has not been successful. Using this soundcard for its 4 jacks 3.5 mm for use headphones 5.1 surround.

    Computer specifications previous (two years, installed in the laboratory of the shop where I bought it):

    PSU: HEC 600W 12CM FAN A.FPC WIN + 600

    CPU: Phenom II 955 Am3 AMD Q.C.

    MOBO: GA790XT-usb3 Am3 + GIGABYTE AMD

    GPU: ATI Radeon 5770 1 GB-5 MSI

    HD: 500 GB 7200 16 MB SEAGATE Sata2

    MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

    DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

    OS: WIN 7 HOME PREMIUM 64 - BIT ENG

    Specifications of current computer (I installed all of these additional components myself with a friend, checked everything twice recently):

    PSU: HEC 600W 12CM FAN A.FPC WIN + 600

    NEW * CPU: Intel Core i7-3770 3.40 Ghz

    MOBO * NEW: MSI-7798

    GPU * NEW: Nvidia Geforce 660 Ti MSI

    HD: 500 GB 7200 16 MB SEAGATE Sata2

    MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

    MEMORY * NEW: 2xKingston 2 GB DDR3 1333 Mhz Pc3 - 10666 that was added in addition to the previous Ram

    DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

    OS: WIN 7 HOME PREMIUM 64 - BIT ENG

    Things I've tried:

    You use check to highlight my drivers, he did cause a blue screen and my computer has not started. I didn't know how to proceed from there however.

    Stress tests my CPU, GPU, PSU temperatures were not unusual or high. Downloaded my MSinfo32, DXDIAG and my last crash DUMP in this link, the rar file. http://rapidshare.com/share/84E3783BE3B66979375E6D2B2C2E7A56

    CCleaner ran in safe mode, fixed broken files and etc. "."

    A ran AVG in Mode safe, Full scan both hard drives. Nothing found.

    My computer case is half open, helping the ventilation and verification problems with cables that are not connected correctly.

    Uninstalled all unnecessary programs.

    Posing this thread.

    If you need other information that I forgot to mention, please tell me that I will do my best to post it here.

    Thanks in advance to all who read this.

    Hello

    The attached file of the DMP is to bug checking DRIVER_VERIFIER_IOMANAGER_VIOLATION (0xC9) .

    This is the verification code bug for all the Verification of i/o Driver Verifier violations.

    Cannot load the image dtsoftbus01.sys, 0n2 error Win32
    WARNING: Unable to verify timestamp for dtsoftbus01.sys
    ERROR: Module load completed but symbols can be loaded for dtsoftbus01.sys
    Probably caused by: dtsoftbus01.sys ( dtsoftbus01 + 1360 )

    -FAILURE_BUCKET_ID: X64_0xc9_23e_dtsoftbus01 + 1360

    Driver found dtsoftbus01.sys auditor perform invalid function calls, causing the corruption of the system. This is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

    Kind regards

    Patrick

  • After SP 2 download my computer will not die after one hour

    before, I downloaded vist pak2 my computer turn off after about an hour of non-use.  Now it does not it stays on all the time.

    Have you checked your sleep/Hibernation settings?

    Changed to a shorter time to see if they work at all?

  • When you use your hard disk defragmentation process starts but seems stuck and won't end evn after several hours. How I can remidy this?

    When you use "Defragment your hard drive" the process starts but seems stuck and won't end evn after several hours.  How I can remidy this? I was already able to defragment successfully.

    Hello

    How do you know that never, it ends when there is no GUI on Vista for Defrag?

    in vista, the defragmentation process works silently in the background

    Unfortunately in vista it does not provide a GUI to show progress as it did in xp

    to do this, you'll need 3rd party defrag programs

    read the comments on these FREE below defragmentation programs and choose the one that you prefer to use

    http://www.SnapFiles.com/get/adiskdefrag.html

    Auslogics Disk Defrag is a disk defragmentation tool that supports FAT 16, FAT 32, and NTFS volumes. It defragments supply with demand automatic defrags when your system is idle and advanced options to customize the files that will be défragmentées.

    http://www.SnapFiles.com/get/UltraDefrag.html

    UltraDefrag is an Open Source disk defragmentation tool that offers a quick Defrag, using a pilot based on the kernel. It offers a simple with a cluster map display graphical user interface, as well as command line interface and scheduling option

    http://www.SnapFiles.com/get/puranfree.html

    Puran Defrag is a Disk Defragmenter easy to use which offers start defragmentation, automatic defragmentation, intelligent directory optimization, background (low priority) operation and optimization of free space. Other features include integrated planning, automatic reboot or shutdown after defragmentation and integration with Windows Explorer to defragment individual files from the context menu. The free version is identical in functionality to the standard version (shareware), but it is limited to a private, non commercial use

    http://www.SnapFiles.com/get/iobitsmartdefrag.html

    Smart Defrag is a Disk Defragmenter automatically keeps your hard disk space does not become too defragemented, which may cause slower disk performance. It works continuously in the background while your computer is idle and requires no further user for basic maintenance intervention. The program also includes an option of manual defragmentation as well as support for the regular defrags and with optional file system optimization.

  • Why close and restart after 1 hour, while I am still connected to my computer?

    My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

    Hello

    Check the Task Scheduler to see if you have anything put out there.

    http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

    ---------------------------------------------------------------------

    Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
    Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
    Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
    Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
    power off - Control Panel - Power Options.

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.

    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------------------------

    Check with this utility, just in case there is a situation of blue screen.

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    accidents and displays the information about all crashes in one table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    ------------------------------

    Also do this so you can see the probable bluescreens. (You may or may not be able to see
    them if they occur even after doing this according to the cause.)

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    =========================================

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Toshiba 40L7335D will turn off by itself after several hours of use

    My Toshiba 40L7335D TV periodically turns off by itself!
    Bought a few days, everything else works perfectly during the day, but after several hours of use of the TV is off!

    Is a problem that someone else has or knows?

    Please see the user manual * page 74 *.
    http://www.Toshiba-OM.NET/LCD/PDF/English/L7335-4050-English.PDF

    _Energy saving Settings_
    + The TV automatically turns off (standby) after 4 hours, if you do not use not the TV, either from the remote or the TV Control Panel. +

    and

    _No signal Power Down_
    + TV turns off automatically after 15 minutes when no signal is detected.

  • Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

    Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

    Hello

    The best way to save battery life is to go into the settings and turn off Apps Refresh

    I now get 3 / 4 hours of battery life more.

    You cannot return to a previous ios 9.1

    See you soon

    Brian

    PS

    If you still have a problem iCloud backup now

    Then restore settings to get rid of any bugs.

  • Display disappears after the period of non-use. The display is fine (a plasma), the computer is running. But no display and must restart.

    Hi-for no apparent reason, the computer has developed the following: after a period of non-use (always on computer), when I re - turn on the monitor I get a black screen.  Using the mouse, knocking every possible key produces no image on the monitor.  Meanwhile, the hard drive is very hard.  Only the appeal should restart.  Any ideas?

    As I said it's a guess.

    Let us know if find you the solution.

  • Why the computer won't put to sleep after an hour, as I expressed it in 'power options '?

    I went to 'power options' Panel command five times and specified that the computer to fall asleep after an hour - it isn't - I have vista

    Hello

    1. What is the number of brand and model of the computer?
    2. have you set a scheduled task for the computer to perform for 30 minutes or more?
    3. what was the recent hardware or software change is high high computer prior question?
    Method 1
    When you configure power options for the active power plan in Windows Vista or in Windows 7, the changes do not appear in the Power Options item in Control Panel
     

    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    See also,
    On troubleshooting in Windows power management
    Method 2
    If you still face the question and then start your computer in a clean boot and check.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Please follow step 7 of the article mentioned above to start the computer normally, once you have completed the necessary troubleshooting.

    I hope this helps.
  • I have four recovery disks that after I bought my computer, I did. These disks can be used to install Windows on the new drive?

    My computer came with Windows 7.  Recently, my hard drive failed.  I have four recovery disks that after I bought my computer, I did.  These disks can be used to install Windows on the new drive?

    YES!

    I just did mine 01/01/2016, installed a new WD 500 GB HDD black on my laptop ASUS K52F, took my DVD 4 restore disks and restored to Win 7 Home Premium, more 10 Windows, which is sitting on my old HDD in the trash. I'll stick with my Original OEM OS and never improve to WIN 10 times.

    NOTE: The only time the restore disks do not work is when you replace your motherboard.

  • Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month so I don't understand why that'

    Help! I tried to connect to my account of Cloud to work in after effects to another computer to adobe. My payment plan appears as the "free plan" so I can't use one of the applications now. I give the whole pack every month, so I don't understand why this is happening. I really need to work now and I can't. Great work Adobe Cloud. Any suggestions on what can I do? Thank you

    Check that your current account (and only the adobe, used in the next step id is good) by logging in here and check the status of your subscription, https://www.adobe.com/account.html

    then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  • Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Hi - I have an old Adobe Audition 1.5 and I used to be able to hear that I was recording. After the update of computer and reload Adobe Audition 1.5, can no longer hear the recording, but only on playback. Please notify.

    Monitoring is done through your audio device, no hearing. When you updated your PC, playback of the audio device settings would have been reset. One of them includes the follow-up of the input jack, and that's what you need to restore. Since we do not know which audio device you use, it's all that we can tell you, except that if it is a device internal, you will need to open the volume control options and he change it. It depends on the good OS versions...

  • Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

    My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

    Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

    Thank you very much for all the advice

    Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
    Different drivers and chipset utilities are used on these books.
    The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

    So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

    Good luck

Maybe you are looking for