BSOD after copying the large number of files from one disk to another
Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
-Gigabyte Z97X Gaming 7 mobo
-8 GB Corsair vengeance 1866 mhz
-EVGA GTX 770 video
-CPU Intel 4770K
-two hard drives of 1 TB WD black in RAID 1
-one ADATA 256 Gb SSD as drive OS
-a 1 TB drive Toshiba
-Windows 7 64-bit professional
-F3 Bios Rev
System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.
I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?
Log name: System
Source: Microsoft-Windows-WER-SystemErrorReporting
Date: 25/06/2014 19:55:50
Event ID: 1001
Task category: no
Level: error
Keywords: Classic
User: n/a
Computer: Daddys-PC
Description:
The computer was restarted after a bugcheck. The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
The event XML:
0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
C:\Windows\MEMORY. DMP
062514-6692-01
No problem, thank you!
All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .
A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).
If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:
===============================================================================
Section 2: x 86 / x 64 MCA
-------------------------------------------------------------------------------
Descriptor of @ fffffa8008788138
Article @ fffffa80087882c0
Shift: 664
Length: 264
Flags: 0x00000000
Gravity: Fatal
Error: Internal unclassified (Proc 4 row 1)
Status: 0xbf80000000200401
Address: 0x00000000fee00040
Misc. : 0 x 0000000000000086
Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.
-----------------------------------------
1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm
Very annoying software, so please uninstall ASAP!
2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:
-MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download
3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.
4.
2: kd > lmvm marvinbus64
start end module name
fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
Image name: MarvinBus64.sys
Timestamp: Fri Sep 23 17:17:03 2005
Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).
5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.
-----------------------------------------
If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:
1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy
2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm
3. make sure that your BIOS is up to date.
4 if all else fails, the only one left to do is replace your CPU because it is defective.
Kind regards
Patrick
Tags: Windows
Similar Questions
-
How display location of the files from one disk to another >
I have a backup utility that daily backup automatically to the top of my files from the computer to the C drive to D drive. I would like that he back up drive J. How re - routing the destination of this file?
In your backup utility? If you select a backup D drive on, I think you should also be able to select a drive J.
-
Lost the ability to copy files from one disk to another?
My setup is a drive C and D inside the Tower, then a MyPassport external USB for weekly backups of player and a MyBook to USB 2 external rarely used to store large files. Everything is defragmented, at least 20% free space on each disk and ran checkdisk and utility mfg of hard drive. The problem is that I can move is no longer files on my D drive and the MyBook. If I try to drag-and - drop or select the file and choose copy on the disk D then go to the folder target on the MyBook drive and choose Paste, all nothing happens. Today, I ran a test and tried to copy a file from the MyPassport and my C drive D. Same problem! PS I have full administrative rights on that PC. Advice?
Yes,
This may be due to WD replacement of keys to default contextmenuhandler of the Explorer. I need to take a look at your registry database to diagnose this.
I found another way to copy files. Use these instructions to install it. If you do not understand something ask. http://www.howtogeek.com/HOWTO/Windows/add-copy-to-move-to-to-the-Windows-Explorer-right-click-menu/
-Alex
-
How to copy outlook express email and files from one account to another
Outlook Express
My husband & I share a computer. It has 1 side and I the other. Until recent Outlook Express has been available on its side of the computer. It is the primary identity and I hace an account out of it. Recent updates have allowed to have Outlook Express on my side of the computer also. How to copy all my files on his side of the computer & bring to my side? I am old and computer illiterate... Also, I don't understand the questions they ask me when I try to open Outlook express on my side of the computer... What is a pop3 server? How can I know if this is what I have?
My husband & I share a computer. It has 1 side and I the other.
- What is a 'Party '? Different user profiles?
- You have your own e-mail address?
You must copy the entire message of his profile store and put it on the desktop of your profile and then in OE, import from an OE store directory. You can import only the records you want.
Backup restore &:
http://www.insideoe.com/backup/How to import Outlook Express 5 and OE6 mail folders?
http://www.insideoe.com/FAQs/how.htm#importOE5Setting up email in Outlook Express servers:
http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx -
Copy some files from one user to another
Hello!
How can I copy (not share) some files from one user to another?
The reason for this is because we rename users to other allocation model.
Thank you!You must share the folders you want to transfer the ownership of the new username, or one responsibility that the new user has (I guess that's an Oracle Applications EUL). The user connects to Discoverer more with their new name. They open the workbook (s) and then do a SAVE AS. Who will save the workbook with them as the new owner. You must then sign with the old name of the owner and to delete these old files (after the first backup them) once you are sure that everything works fine. Yes, it is a nasty process. What we do is we use a "dummy" username when we create/modify the workbooks. In this way the fictional user name is the owner of the workbooks. So, it does not matter if a person leaves or if you change the user naming conventions. If you have many users to create cabinets, then a dummy user name doesn't quite work. You could always submit an enhancement request to Oracle for a copy function. I hope that you will get a lot of customers to support such a request.
John Dickey -
Original title: folder permissions to move or copy.
I have a problem that I'm sure has a simple explanation but I don't know. I have a folder in the tree that whenever a user moves a file from one folder to another, the permissions do not update. Yet if a user copies the folder to the same location, permissions to update as expected. This only happens with XP. If I try with Win 7, if the user moves or copies, update permissions.
Has anyone seen this or have an explanation?
Hello
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the forum TechNet for assistance:
http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
Hope the helps of information.
-
Make a bunch of audio files, placed in a folder on my desktop. Files initially sent to RealPlayer to burn, but when finished burning CD and went to read a CD, folder got seized by Media Player, 'Indexed' and disappeared from the office. I'm a relatively new computer user, and I need to learn more about file paths, how to view the path FULL of a file on my computer and how to type (create) full path when I need to. The "Indexing" feature seems to erase this lesson for me, and after having spent four hours trying to find Vista instructions on "How to move the file from one place to another", I gave up! Windows 'Help and Support' on my computer gives wrong directions. It states that if I right click on a folder > properties, a dialog box opens with a tab by which I can move my account. There is no tab location here. I found locations tab when right click on the "Mobile" folder, but still no option to "move file". No idea what is the folder "Roaming" or why it's on my computer. I want my audio files in the My Music folder, but this place is "access denied." Don't know how to get the audio file it in any case, but if anyone has any advice, I would be very happy! Thank you. PS - I had no problem moving folders in XP. I don't like the idea that a computer is to decide where to put my files. I want to control where I put my files. I don't like the way search works under Vista. I liked the XP search companion better because, for a computer fool like me, it was really easy to organize and find files and folders and had an option specific to find audio and video file TYPES.
Here is an article on how to move your personal folders in Vista: http://www.howtogeek.com/howto/windows-vista/moving-your-personal-data-folders-in-windows-vista-the-easy-way/. If you're talking about the special folders (such as photos, Documents, office...), then here is an article on how to move: http://www.winhelponline.com/articles/95/1/How-to-move-the-special-folders-in-Windows-Vista.html.
If you have trouble with the search after you move the files, then rebuild the index: http://www.tech-recipes.com/rx/2103/vista_rebuilding_the_search_index/. Here is an article on how to use Indexing Options in Vista that may be useful for you: http://www.vistax64.com/tutorials/69581-indexing-options.html.
If the above does not help, your problem seems to relate to the image of the files/folders and their interactions with Media Center (which operate on different other folders). Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues of the image will be more than happy to help you with your quesitons.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
How to copy a file from one folder to another?
Windows 7, my images: how to COPY a file from one folder to another?
Right-click on the file and drag it to the other folder. Release the button on the right and click on copy here.
-
When you manage files in iCloud, from an iPad, I can move to the files from one folder to another, but not in the Preview file. Secondly, when I check the file Preview to iCloud from Mac content is so different when you look at an iPad. Why is the gap between the iPad and the Mac?
Try to go to iCloud.com to see if the elements are there and whether the device or the computer. That should indicate if the device or computer is not synchronizing. If the computer, try going to System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing. If the device, go to settings/iCloud and do the foregoing.
-
Need help with the error message when you try to transfer a file from one laptop to another.
I'm trying to transfer a file from one laptop to another using Belkin transfer cable. While trying to install software for my old laptop, I get an error message as follows WET7CABLE ERROR OPEN. LOG FILE. I tried with the support of Belkin and they referred me to Microsoft. Please help me with this question.
Thank you
Nelson SantiagoHello
It is a matter of easy transfer Windows.
Read on this and the solution here:http://support.Microsoft.com/kb/980870
Kind regards
Joel
-
I can't move files from one folder to another on Windows Vista.
Hello
I can't move files from one folder to another in windows Vista.It is quite frustrating.I am an administrator of the account.I get an error saying that I don't have permission to do the action.It is said: Destination folder access denied. You need permission to perform this action. Then the buttons 'Try Again' and 'Cancel '.Help, please!Here is a link to an image of the error I get when I try to move a file:Thank youJeremyExplorer
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).
Close the browser and start a command prompt
- Close Windows Explorer
- Start - All Programs - Accessories - right on command prompt and choose run as administrator.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete then Task Manager.
- Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
Then to restart the Explorer after trying all of the following
- Press Ctrl + Alt + Delete and choose Task Manager
- In the Task Manager, click the file menu and then click new task (run) and enter explorer
If you cannot start the Explorer at all
- Press Ctrl + Alt + Delete and choose Task Manager
- Under the processes tab, click Show processes from all users to elevate to administrator
- In the Task Manager, click the file menu and then click new task (run) and type cmd
- Other things you can try typing
Explorer
Explorer c:\
Explorer/e, c:\
wercon
control
Iexplore
Rstrui
If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.
Reregister the shell registry entries
It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
regsvr32 /i shell32
regsvr32 /i urlmon.dll
regsvr32 RPCRT4.dll
regsvr32 PROPSYS.dll
regsvr32 MSCTF.dll
regsvr32 cscui.dll
regsvr32 rsaenh.dll
regsvr32 timedate.cpl
regsvr32 ATL DLL
regsvr32 OLEACC.dll
regsvr32 actxprxy.dll
regsvr32 USERENV.dll
regsvr32 msshsq.dll
regsvr32 NaturalLanguage6.dll
regsvr32 thumbcache.dll
regsvr32 WINTRUST.dll
regsvr32 MMDevAPI.DLL
regsvr32 audioses.dll
regsvr32 audioeng.dll
regsvr32 ExplorerFrame.dll
regsvr32 msi.dll
regsvr32 FirewallAPI.dll
regsvr32 netshell.dll
regsvr32 pnidui.dll
regsvr32 QUtil.dll
regsvr32 c:\windows\system32\wpdshserviceobj.dll
regsvr32 WINHTTP.dll
regsvr32 C:\windows\system32\qagent.dll
regsvr32 C:\windows\system32\portabledeviceapi.dll
regsvr32 wbemprox.dll
regsvr32 wbemsvc.dll
regsvr32 fastprox.dll
regsvr32 imapi2.dll
regsvr32 wshext.dll
regsvr32 gameux.dll
regsvr32 msxml6.dll
regsvr32 vbscript.dll
regsvr32 jscript.dll
regsvr32 wshext.dll
regsvr32 wshom.ocx
regsvr32 wshcon.dll
regsvr32 scrrun.dllDelete the folder and the settings of the Menu
This will remove the settings are saved for each file that you visit. Also the order of the start menu.
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f
Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder" /f
Delete the thumbnail and icon Caches
Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
attrib - r s h '% userprofile%\AppData\Local\*.db '.
del "% userprofile%\AppData\Local\*.db".
Disable thumbnails and previews
Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.
If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.
Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.
If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f
Turn around after testing the Explorer.
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f
Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f
A boot is a way to explore
It can be caused by a shell extension.
Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).
The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.
- Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
- Close Windows Explorer
- Start Autoruns by right-clicking and choose run as administrator
- Click on the menu Options - Filter Options and check hide Microsoft entries and disable include empty locations
- Go to the Explorer tab and uncheck everything to the left.
- Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer.
- Press Ctrl + Alt + Delete and choose Task Manager. Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.
- Click the file menu and then click new task (run) and enter explorer
If this can help, reactivate ½ at a time to identify those who. If this does not help, restart AutoRuns and go to the all tab and uncheck everything that it and restart. If this can help, reactivate ½ at a time to identify those who.
Run Microsoft Fixit
Microsoft has a range of automatic programs to solve common problems. To see problems explore
http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us
For the visit of the list the most comprehensive
http://support.Microsoft.com/FixIt/en-us
When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.
Recycle BinIf the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).RD C:\$RECYCLE. BIN/s/qthen repeat for each drive to change the drive letter, for exampled:\$recycle Rd. BIN/s/qe:\$recycle Rd. BIN/s/qIf the Office does not startThis will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).MD "% userprofile%\DesktopTest".Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest" /fMD "% public%\desktopTest".Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" v "Common Desktop" REG_EXPAND_SZ /d "% Public%\DesktopTest" t fTo restore default after having tested if begins to explore.Set ExpFix1 = % userSet ExpFix2 = % profilereg add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fSet ExpFix1 = % PubSet ExpFix2 = % licreg add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% ". ' ExpFix1 ExpFix2%% \Desktop "/fYou will need to disconnect then. -
How to transfer files from one user to another in Windows Vista?
How to transfer files from one user to another under Vista?
How to transfer files from one user to another under Vista?
A simple way is to move the file to the Public folder.
Public folder is accessible by all users.How...
Right click on the file > click Move To > navigate to the Public folder > click on move.If you do not Move To option in your right click context Menu, here is the tutorial...
http://www.Vistax64.com/tutorials/89196-context-menu-add-copy-folder-move-folder.htmlUse an easier method.
PS you can also use methiod drag-and-drop rather than pass to the method. I prefer the latter.
-
Move multiple files from one folder to another in SkyDrive?
How can I move multiple files from one folder to another in SkyDrive? When I click on a file, & then use CTRL-click on another file, it moves to that one. Can I select multiple files & copy or move or rename on PC?
For now - not. SkyDrive Wave5 or anyone should have this ability when it is fully released.
http://www.LiveSide.NET/2011/09/06/SkyDrive-wave-5-to-finally-support-multiple-files-selection/
(Read and also read comments on things, you might be able to use now to accomplish what you want).
-
Moving files from one host to another, Skydrive will work?
Original title: moving files
How can I move files from one room to another? You need to move them so I can save some monthly hosting fees. Can I use Skydrive for this?
David Baumgardner
How can I move files from one room to another? You need to move them so I can save some monthly hosting fees. Can I use Skydrive for this? David Baumgardner
Hey davemaninohio
read information from skydrive on below link for what it does
http://explore.live.com/Windows-Live-SkyDrive
Walter, the time zone traveller
-
How to copy a profile for a child from one device to another family safely direct windows to Windows 7? I have several devices on Windows 7 and my child has ins journal to each device. I want safety to be entirely copied from one to the other devices. How can I do?
Hello
Thanks for posting your question on the Microsoft community.
Thank you for your query details.
I also appreciate your concerns about security for the family.
I suggest to read the following article and check.
Reference:
http://Windows.Microsoft.com/en-us/Windows/set-up-family#set-up-family=Windows-7See also this wiki article created by Lonnie_L on August 24, 2013.
Family Safety: frequently asked Questions
http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5I hope this information helps.
Please let us know if you need more help.
Thank you
Maybe you are looking for
-
Re: How to recreate a deleted recovery partition?
With the help of a Toshiba Satellite M840 running Windows 7 64-bit.I accidentally deleted the hidden restore partition. Is it possible to recreate since the recovery discs?
-
Remove and check cartridge error message
For officejet 6210 all-in-one 7hr power outage at home, got the message "remove and check color cartridge '. This is done several times without success. Color cartridge was working properly before the power failure. tried power off and on again -
-
Microsoft Wireless Optical Desktop 1000-keyboard and wireless mouse Combo does not
Hello I use the 1000 desktop wireless for about 1 year now. Now the keyboard works intermittently and the mouse works almost not at all. I get no error message at all. I tried to replace the batteries too, but no luck there I have replace the mouse &
-
What is the purpose of the Taskeng.exe process... ???Usually, I end this process after I have connect to windows...Is their problem...?
-
I'm dv7t-7200 CTO select edition laptop. Downgraded to Windows 7 Windows 8. Everything is in place ad market except in Device Manager there is still a scream on PCI Device brand. The hardware id is: PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV