BSOD after installing HD Graphics 3000 (Yes, goes again...)

Hey Hey community,.

I have a problem (bug gold!) old or when I try to install the intel HD Graphics 3000 on Windows 7 64 bit, the laptop restarts only a BSOD at logon message 'welcome. '

I tried several combinations, many drivers, I don't know what to try now.

I'm sure it's a driver related problem, as if I boot without Intel driver (or in safe mode), it starts perfectly.

There is no conflics with other software / drivers installed: after the new installation of W7, I (try to) install first Intel.

The laptop is an Aspire V3 - 571G with an Intel Core i3 processor - 2348M (and I guess that the BIOS is v2.13). It has been sold with Windows 8, then improved to 8.1, then 10. Now, its owner wants to return to W7.

I tried the driver on the site Web of Acer Disconnections with all versions 64 bits (7, 8, 8.1) and the pilot last and last-1 of the Intel download area, new BSOD. Also tried (with all versions) to install with/without AERO support, even here.

So I ask here if someone has a similar laptop with a working driver that I can use to complete my installation.

Thank you!

Thank you for your time.

It turns out that I understood little where the problem came

The laptop was sold with a single 4 GB of RAM, and the owner it upgrade 2x4GB

Before my first post, I memtest'ed the 8 GB, no problems appeared.

Yestarday, I tried to boot W7 + Intel driver with the original 4 GB, it worked.

Then switched with only the other 4 GB, crash/BSOD

The second added 4 GB is exactly the same brand/model/specs as originally installed

To be sure, I started in yesterday a memtest with Aries crashy. This morning, after 4 pm and 18 assists, no problems appear. (memtest + 4.20)

So good... I guess that...

In any case, thank you for taking the time to answer me.

Tags: Acer Laptops

Similar Questions

  • Tecra 9000 - BSOD after installing display driver

    Hello!

    I installed WinXP new and now I have problems with my grafic, I think.
    Make it just a blue screen with a warning "IRQL_NOT_LESS_OR_EQUAL" or sometimes a defect of a date called as something of my graphics card.
    And sometimes my system just hangs.

    Someone at - it help?

    Hello

    BSOD is the result of a serious software, issue or hardware malfunction.
    You said that this BSOD appears after installation of the graphics driver.

    First of all; have you installed the graphics driver on the right?
    On the other hand; have you installed Win XP patches?

    The Toshiba driver page provides a few Win XP drivers for this model of laptop
    The drivers are placed in the Archives area because this laptop is an oldie
    Must check

    If the BSOD still appears after updating Windows XP and after installation of the good driver then a hardware problem could be the reason of this problem
    By hardware malfunction, I mean the number of graphic chip or module memory problem.

  • No audio after installing new graphics card

    I recently installed a Geforce 8800 gt xfx graphics card. After you install the graphics card, I have more audio analogue. My computer does not detect the analog audio devices. Things I've tried: reinstalling the drivers chipset audio activation built into the bios bios reset CMOS reset reinstallation Editing registry. PC specs: http://support.hp.com/us-en/document/c02628226 (Note: all specifications listed are correct except the video card and power supply) voltage is the 450w graphics card: http://www.newegg.com/Product/Product.aspx?Item=N82E16814150280

    Yes, it is possible, that there is an overload.

    The solution is to get a sound card not cheap, I think.

    One that works with everything what add on slots (PCI/PCIe x 1) you have.

    Then get a Radeon HD6570 (didn't need additional power supply), or some other card Radeon HD if you wish.

  • Drawing objects in Firefox and Thunderbird after installing the graphics card MSI R6850 of AMD

    After installing the new graphics card (MSI R6850 CYCLONE 1GD5 PE/OC), pilots the latest on Windows XP 32-bit, I frequently meet with Mozilla Firefox 8.0 and Mozilla Thunderbird 8.0 drawing artifacts. The problem presents itself as a horizontal black bands or model checker color scattered. It occurs especially when the child (like the Download Manager) passage of another application for Firefox or Thunderbird or when to switch to a window for Firefox. It affects the entire application or only some rectangular (region clearly who was redesigned due to change of application). Then repaint (such as switch between Firefox tabs) usually solves the problem. This is just visual, the behavior is not affected. The problem never happened to any other application so far. Any ideas? Any who have experienced the same problem? Thanks in advance.

    Zbynek

    P.S. Here's the screenshots for the two problems:

    http://astrofoto.euweb.cz/tmp/black_stripes.jpg
    http://astrofoto.euweb.cz/tmp/color_boxes.jpg

    Try turning off hardware acceleration.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    If disable hardware acceleration works then check if there is an update available for your graphics display driver that corrects these problems.

  • No Signal after installing new graphics card

    Hello and thank you in advance for your help!

    We have a 2 years old HP p6540y.  It has an ATI video card integrated. When we recently turned on, we got a message "no signal" on the monitor and then he'd go to sleep.  We tried many things to fix... listed below, in order and are always the same message.  Please advise!

    (1) No Signal: DVI, VGA, HDMI.  So we unplugged and rebooted, no change.

    (2) checked monitor and DVI & VGA cables with another computer: they all work.

    (3) installed new graphics card: NVIDIA GEForce GT 610.  Still got same message "no signal".

    (4) we plugged/unplugged all the other cards/cords / no matter what we could and cleaned.  Then, finally, the monitor turned on! But not for long...

    (5) after you restart the computer after installation of the graphics card driver, we got the 'no signal' message again.  We released once more, other cards/sheets and again once the monitor and the computer came to life.

    (6) we uninstalled the ATI integrated graphics card.  When we go to display, Advanced Options, he mentions our new NVIDIA as graphic/video card.

    (7) we turned computer off during the night and this morning when we have lit, we once agin got the message "no signal".  We have unplugged/plugged computer several times.  Also tried the trick with cards/plugs by pulling and we have nothing.  No Signal.  After doing this several times (about 10), he is finally working again.

    (8) we changed the sleep settings to: screen saver = never; Standby mode = never.

    (9) we restarted again to get once more no signal message.

    So... what should we do?

    Thank you very much!

    Triusa, welcome to the forum.

    I think that your problem is caused by the power supply unit (PSU).  Here's a guide to help you solve the problem:

    http://support.HP.com/us-en/document/bph06788

    Also, the existing PSU is 250W.  The 610 GT requires a minimum of 300W.

    If your problem is solved, please click "accept as a Solution.

  • HP PAVILION HPE h8-1192d: could not start after installing new graphics card

    I recently bought a Gigabyte GTX 750 Ti Black Edition to replace my old. But it will not start after installing on my h8-1192d, and stuck on the screen flash hp. Help, please!

    Hello

    NVIDIA GTX 7xx or 9xx series graphics cards will not work in your PC.  The BIOS in "chicago" mothererboard is not compatible with the video BIOS in the graphics card.  You will need to get an older card chart such as the one of the below listed OEM HP graphics cards. Depending on the graphics card, you may need to replace the power suplly.

  • BSOD after installing the update of Norton on HPg7

    Laptop has been random and very frequent BSOD after an automatic update of Norton. Tried everything but that remove Norton stopped the problem. Deleted Norton several months ago without even a recurrence of the problem therefore reasonably certain that the cause was the Norton. Myy question is what anti-virus program is known to work reliably on HP g7? Currently to have not installed because I don't know wht will run.

    Hello

    Fewer hogging resources & a pretty decent anti-virus software which can only be invoked:
    Windows 7 & Vista: http://www.microsoft.com/security/pc-security/microsoft-security-essentials.aspx

    Windows 8: http://www.microsoft.com/security/pc-security/windows-defender.aspx

    Kind regards

  • HP ENVY PHOENIX h9-1355: hard drive not detected after installing new graphics card?

    My computer at starup tells me that it cannot detect my hard drive after installing a new graphics instead of my old card.

    The news is ASUS GTX 960 old Turbo was AMD Radeon HD7770.

    Can someone please help!

    Please, I beg you!

    See your other post.

  • Many BSOD after installing Samsung SSD 840 pro in ThinkPad Lenovo R60

    Have an old Lenovo ThinkPad R60 with screen SD that I won't. After installing the Samsung SSD Pro 840 the BSOD started coming, now every week, the last one on today. I don't see the option to download the dump anywhere file, so I enclose a picture with - maybe - some info.

    Can anyone help?

    Thank you

    okinchi

    Not at all surprising that involved C:\WINDOWS\SYSTEM32\DRIVERS\SYMEVENT. Pilot of the SYS Symantec event library.  I remove it and use MSE in its place

    Symantec is a common cause of BSOD.


    I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  • TC M51 sluggish after installed PCIe graphics card

    Well I went through 10 the 39 pages of this forum and the suspect, I have an answer, but still want to check with anyone in the know.

    I have a model of ThinkCentre M51 1843-wnv and put up-to-date with:

    2 GB DDR RAM (total now 2.5 GB) by Kingston

    WD Caviar Black 500 GB HARD drive with 32 MB of cache (SATA 7200 RPM)

    Map of graph SAPPHIRE Radeon HD 4550 PCIe with 512 MB of DDR3 RAM

    and I use a logitech (with USB to PS/2 adapter) USB mouse and a USB microsoft ergonomic keyboard

    I installed every update, one at a time to make sure things were ok.  Things were ok until I installed the GPU (last updated).  Now my system takes a long time to start and stop and the intermittent mouse jerks across the screen.  I wait a few seconds and he is well again.  It's as if there are not sufficient resources every now and then.  For a time that the office works very well and then a few minutes later he has a jerky behavior that erases then after a wait.  Start and stop are however still much longer than they were.  I have to go and make the coffee while it starts and stops.  But even this behavior is inconsistent.  Sometimes it starts and stops quickly, as it should.

    I wonder if the GPU and HARD disk are pushing the limits of my diet (310 watts).  Side of the box GPU stipulates that the minimum requirement is a 300 Watt power supply.  Mine is 310 Watts so I thought I was good, but the desktop is perhaps, with the large disc of HARD fast intermittently requiring more power than is available.

    Any thoughts?

    Is an upgrade of the power source easy to do something?  This will solve the performance issue? I've updated GPU, RAM, hard drives, USB and card faxmodem cards.  An upgrade of the power source is easy?

    Thank you!

    Macaws

    Well, how does it work!

    I uninstalled the sound integrated edge and also the SoundMax drivers and installed instead an his SB XFi Titanium PCIe card and voila!  not only do you have this problem, but I have now improved for my 5.1 system sound quality speakers.

    Why the built-in sound system would cause my office become slow after installing a video card?  How install PCIe sound card and turning off the sound of the mobo solves the problem?

    If anyone knows I really want to know how it works.  At the moment, it seems just as if by magic for me.

    in any case, I'm very happy.  My 2nd hand desktop Lenovo is a speed demon!  Movhorn thanks for your help.  Very much appreciated.

  • Win7: Any difference after installing a graphics card?

    Hello

    I don't have a visual experience usimg a PC will open a graphics card.

    I will not watch TV or DVD or browse photos on my PC.

    I use in on browsing the web and MS Office applications.

    If I install a graphics card (low range) low profile such as the silence of 210 ENT ASUS or Gigabyte HD6450.

    May I know if IE9 fonts and photo and deskop applications would look sharper and clearer?

    My PC is an Intel Core 13-2120 with Intel HD graphics driver installed. I use a screen resolution of 1600 X 900 20 ".

    Thank you

    Low

    You have posted several times re your graphics card, so I just make a comment.

    The visual experience of the display/graphics often depends on the individual, what a person is satisfied to another may not be.

    I believe that you said that your display is much "sharper" when you used Windows XP on another PC with the same monitor

    Browsing the Web and the desktop are not graphics applications, I've seen some people complain the graphics Office 2010 from Office 2007

    HD6450 Gigabyte is not an expensive card so I guess that you have little to lose by trying it, the Asus is still cheaper and it is obviously silent

  • Satellite A200 PSAF3A - ccreen goes black after installing the graphics driver

    Hello.

    I have a Toshiba Satellite A200 which has the video adapter Mobile Intel (r) 965 Express Chipset Family (256 MB).

    I bought my computer in Australia and is the SATELLITE A200 (PSAF3A-08202D) with Windows XP.
    The computer began to be very slow, and since I had a lot of programs that I wanted more I restored it to the out of the box.

    The problem is that the screen went black after the windows logo. He worked only in safe mode. I deleted the drivers of graphics cards and it works but without a graphics card.

    Now, I can't play games or watch movies.
    Whenever I try to install the driver, no matter if its from the cd that came with the computer, the toshiba Web page or the Web site intel it still restarts black screen.

    I tried to disable the adapter instead of uninstall. When I enable it, she accepts and he will say his work but just with screen resolution of 640 x 480.

    If I try to put it above it is always black.
    Can someone help me?

    Thank you very much

    Hello

    First of all, you should visit this Australian page from Toshiba:
    http://www.ISD.Toshiba.com.au
    You will find all the drivers for this model of laptop.

    I checked and found that there is a BIOS v2.5.
    Check if the BIOS needs to be updated (if the older BIOS is installed)

    In addition, there is a display driver v14.29.1.4833 and chipset driver v8.2.0.1012
    Install it!

    Last but not least the Win XP should be updated to the latest state!

  • HP Pavilion dv7-6141eo with BSOD after installing IE10 or IE11

    Since a few months I had problem with my computer with BSOD when trying to install IE10 or 11. It is not a problem when you use IE9 but it happened to old for some pages, and I really need to use a more recent browser.

    The text displayed in the BSOD is:

    igdpm64.sys

    PAGE_FAULT_IN_NONPAGED_AREA

    As I understand it, it's a problem with HP laptops with two card...

    I reinstalled the computer twice (reset), but as soon as I install IE 10 or 11 the BSOD comes back. I removed Norton Antivirus once to check if BSOF problem is a problem with this program, but she came back after a while when you use IE10. The reason why I removed NIS was that I myself BSOF whenever I run the update from NIS...

    I know the problem with the "KB267083" update... so don't tell me to remove this...

    Please help me with this problem.

    Thank you

    By

    PSBPSB

    Please uninstall Windows Update KB2670838

    http://support.Microsoft.com/kb/2670838

    Reset

    Uinistall AMD driver

    Reset

    Install the new

    http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55092.exe

    To disable hardware acceleration, follow these steps:

    1. Click Start, and then click Internet Explorer.
    2. Click on the Tools icon in the upper right corner, then Internet Options.
    3. Click the Advanced tab and under Accelerated graphics, select the checkbox made software use instead of GPU rendering .

    reset

  • blue screen after installing new graphics card

    Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista will boot into safe mode without problem & also start normally when I reinstall my old card. my system is fully updated & all drivers are up to date.

    A way to solve this problem

    Thank you very much for the help, discovered that the graphics card was defective. Tested my friends GT 220 card in my system & installed without any problems. Anyway, I picked up the card & brought a radeon HD5450 instead, installed without a problem, then I say problem solved.

    Thanks again wb2001

  • BSOD after installing new 1 GB RAM on Satellite Pro M40

    Hello

    I recently got 1 GB of DDR2 memory for my Satellite M40.
    It worked brilliantly for about 10 minutes, everything was nice and fast, Windows recognizes & used.
    Then I turned off the computer. After turning it back on and I was doing some intensive RAM stuff... well messing around with settings i-tunes in any event viewer, when I got the dreaded blue screen of death.

    I rebooted, but could not even go beyond the home screen without the error message appears.
    Only without the RAM installed can go without a BSOD for any serious amount of time. I tried swapping ram autour in two struggling but no luck...

    Any help would be great,
    Thank you very much in advance,
    Roland

    Hello Roland

    The description of your problem is very nice, but why you didn't mention which module of RAM you use for the upgrade. What is a product without name or compatible module recommended by Toshiba?

Maybe you are looking for

  • System Restore has been removed and bookmarks and bookmark backups

    Hi, my father-in-law has tried to install a speaker sound systems on his PC and needed to return to a previous configuration using the system restore. He has done this, but lost all its bookmarks firefox during the process. I don't know if it is to i

  • Marking clips as Favorites IN timeline segments?

    I know we can score selections of clips in the browser as Favorites.  And then create a list of keywords / project amongst these selects 'F' I find it very very slow. I like to browse clips in the timeline.  Just wheeled aligned segments I want and r

  • Qosmio F10: Jerky in Qosmio Player DVD playback

    Hello world I have a problem with Qosmio player. Although the quality of the image of the DVD playback is very good, reading itself is terribly agitated, at a rate of about 10 to 15 frames per second, I guess. Playback in Windows XP works fine. Someo

  • Enable direct access to memory.

    I ran the microsoft fixit tool and it says that I can improve performance by enabling DMA. How can I do this? I'm on Vista Ultimate OS.

  • Low cartridge warning, even after replacing

    HP Photosmart C7280. Windows 7, 64-bit. I get a warning of low (light magenta) cartridge, but after that I put a new in the printer still tells me to replace it. It's only the magenta slot clear with this problem. Thank you flexible