BSOD after the first reboot then MDT imaging process

Similar Questions

• Upgrade Windows 8 Pro blocked after the first reboot

  I have a HP Media Center PC m7470n. When I upgraded with Windows 8 Pro disc, after the first reboot, it gets stuck on the Windows form with turning points. He's not going back to XP and when I stop and restart, he goes right back to the same screen. I tried to boot from a hard drive and CD ROM with the disc in. I also tried to do a system restore, but it still maintains just that goes back to the same screen. , I even contacted Microsoft Support and after 1 1/2 hours, I had to let go because I had to go to work and they do not have a solution for me. I am not able to go in Mode safe either. Can someone help me with this update or at least get back to XP so that I can at least use my computer? At the moment I feel that Windows 8 Pro comes to have my computer in an oversize weight.

  Hello

  Thanks for posting the question in the Microsoft Community. If I understand correctly, you can not connect to the computer. I understand that it must be frustrating, but don't worry, we are here to help solve the problem and guide you in the right direction.

  I suggest you follow the steps:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot

  Hello

  I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.
  Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?
  Long story short, after several relocations (refresh option), I've noticed as a result of behavior:
  1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.
  2. when I restart the computer and any time after that, is STOP WORKING.
  Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?
  It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).
  Help me please, since this is quite irritating :(

  Hello

  I finally found the problem.
  The invisibility of the active network has pushed me towards the answer.
  biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.
  By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.
  In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.
  Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!
  The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.
  This should be corrected, as it would be a great help in this scenario.
  TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).

• Service "XE" disappeared after the first reboot

  Hello, I am facing a strange problem, maybe you can help me.
  
  I installed oracle XE version 10.2.0 on Centos 5.0 as root
  the installation went well and everything worked for me, but after I rebooted my machine
  I can't connect to the DB from a remote computer and also I can not access to the
  DB home page (http://127.0.0.1:8080/apex) on my local machine.
  
  I tried to study the question, and I found something strange.
  After the installation (when everything was still working).
  the command 'lsnrctl_status' gave this result:
  

  LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 01-DEC-2009 18:31:42
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                25-NOV-2009 16:35:50
  Uptime                    6 days 1 hr. 55 min. 51 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Default Service           XE
  Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
  Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=8080))(Presentation=HTTP)(Session=RAW))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "XE" has 1 instance(s).
    Instance "XE", status READY, has 1 handler(s) for this service...
  Service "XEXDB" has 1 instance(s).
    Instance "XE", status READY, has 1 handler(s) for this service...
  Service "XE_XPT" has 1 instance(s).
    Instance "XE", status READY, has 1 handler(s) for this service...
  The command completed successfully

  now, after the reboot, the "lsnrctl_status" command returns this result:
  

  LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 01-DEC-2009 19:07:41
  
  Copyright (c) 1991, 2005, Oracle.  All rights reserved.
  
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                01-DEC-2009 18:39:34
  Uptime                    0 days 0 hr. 28 min. 6 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Default Service           XE
  Listener Parameter File   /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/admin/listener.ora
  Listener Log File         /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/network/log/listener.log
  Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC_FOR_XE)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
    Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  The command completed successfully

  as you can see that all the associated XE services disappeared and the summary of endpoints is also different,
  Why is this? That's happened?
  
  either way, my listener.ora looks like this
  

  # listener.ora Network Configuration File:
  
  SID_LIST_LISTENER =
    (SID_LIST =
      (SID_DESC =
        (SID_NAME = PLSExtProc)
        (ORACLE_HOME = /usr/lib/oracle/xe/app/oracle/product/10.2.0/server)
        (PROGRAM = extproc)
      )
    )
  
  LISTENER =
    (DESCRIPTION_LIST =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
        (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain)(PORT = 1521))
      )
    )
  
  DEFAULT_SERVICE_LISTENER = (XE)

  origin this host name?

  I do not know. And what is vcentos ?

  I take a look at the configuration of your network, and then try to change your/etc/hosts, something like

  127.0.0.1       localhost.localdomain localhost
  ::1             localhost6.localdomain6 localhost6
      
  

• Satellite l350-262 HARD drive failed on the first reboot

  Hi guys,.

  I just bought new satellite L350-262 of amazon.co.uk
  It was delivered today so I started to put in place. It started fine, let me regional selection and networking options, and then it restarted and...
  I saw console message saying "a disk read error occurred...". "that indicates a failure of the HARD drive.

  I restarted and went into the BIOS settings and it appears on the first page of the BIOS that he does not see the drive (can recognize the DVD), but on the priority start screen TOSHIBA (and some) against the HARD drive.

  This problem occurred after the first reboot Windows 7 installation is forcing you to do, I didn't have the chance to create backups, and I can't see windows being installed at all, cause I can't do F8-> recovery which I thought to try as well.

  I think return the laptop it does not work, but before that... you have other ideas?

  Is it worth to make diagnosis of disk? Even if it says disk is ok, how I reinstall/install the system preloaded with no disk backup etc.?

  Thank you
  Greg

  > I think return the laptop it does not work, but before that... you have other ideas?
  I'm afraid, if the disk HARD is not recognized in the BIOS, that means HARD drive failure and you will not be able to recover it with the help and recovery disk or using recovery disc HARD m.
  It s really strange that a HARD drive is dead at first, but what looks like a bad luck, this can happen, because it s a machine

  Usually the HARD drive is under warranty as the entire notebook then you can request a hotfix and warranty would cover everything

  Welcome them

• My screen freezes 1 min after that I start my PC (only the first time) then it works throughout the day

  It only freezes once and for some strange reason windows crashes when I click on Administrative Tools.

  Additional information from the double wire:

  I have absolutely no problem, except that Vista freeze 5 min after the first start of the day, and then it works fine.

  I also run a memory test and it found nothing.

  It's a hardware problem, because the problem persists after reformatting. Thanks for making me reformat the computer, guys.

• Installation on disk external USB - "Closed circle" after the first restart of the installer

  I tried to install on my MacMini Sierra (end 2012, Mavericks) to an external Seagate USB 3.0 drive 3TO. The drive is freshly formatted with utility disk (, logged, etc. extended partition GUID) and retired in good health.

  Installation always fails on the first reboot. On the first reboot, the screen goes black, there is a white Apple and white progress bar that moves two or three times to the right and then clears the screen and dreaded him circle with a diagonal line appears. Force reboot simply repeats the process.

  So, I decided to try and install the Mavericks (the OS on the internal SSD flash of the Mac mini disc) of the partition of the USB 3.0 drive recovery external. This eventually ended up with a white screen, the dreaded circle of diagonal and a widget of rotation for several hours. Force restart it worked and a new Workgroup installation Mavericks was now hard disk external and implemented to date.

  Another attempt to install Sierra on the external hard drive, but this time the Mavericks running on the external hard drive is not in the same way with the dreaded circle and the diagonal line.

  Near ideas, I tried to install Sierra on an old Seagate 500 GB disk firewire external hard. Shock, horror... it worked without any problem.

  Sierra is simply not install on an external USB 3.0 :-(3 TB drive

  Someone has it successfully? Any ideas?

  The saga continues...

  I tried the USB of the FW - same problem Imaging reader drive.

  I tried to start the Sierra - same problem recovery partition USB drive.

  WORKAROUND SOLUTION:

  I plugged the USB3 drive on a cheap Chinese USB2 hub and... Sierra, booted from the USB3 drive! Obviously not ideal speed wise, but it'll do for now.

  Sierra really dislike my external Seagate Go Flex Desk media USB3 drive when it is plugged directly into a USB3 port on my Mac Mini end of 2012.

  [Keep in mind, the Mavericks had no problem installing and running on the drive USB3.]

• Windows 7 Pro 64-bit not start after the first update.

  Integrated system:

  Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

  CPU: Intel Core i7-930

  Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

  HD: Western Digital Black 500 GB SATA 3 Gb/s

  Water cooler: Corsair H50

  The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

  First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

  The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

  Can someone help me with this problem?

  Thank you

  M. Vilela

  Hi Danielle,

  In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

  Step 1

  You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

  To view the update history, follow the steps below:

  A. open the control panel (all items view) and click the Windows Update icon.

  B. click on the link to view update history.

  To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

  Step 3

  I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

  To restore the operating system to an earlier point in time, follow these steps:

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  b. in the System Restore dialog box, click on choose a different restore point and then click Next.

  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  d. click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• force password reset after the first connection

  Hi all! I am facing a few problems that I hope you can help me with. I am the authentication of the APEX for my application - and I try to get my request to the user to reset their password after the first use of force. I thought that this should automatically - but is not (even if I use the integrated login page). So, I turn to you to see if you can help understand me what I miss. Thank you for reading!

  Authentication scheme: The authentication of the APEX, with a procedure of login after called check_pwd_reset. The procedure looks like this:

  /*

  PROCEDURE check_pwd_reset IS

  l_host_url varchar2 (1000): = apex_util.host_url ('SCRIPT') | ' f ? p = 53140:500:' | : APP_SESSION.

  BEGIN

  IF (apex_util.change_password_on_first_use (: APP_USER) = TRUE AND apex_util.password_first_use_occurred (: APP_USER) = FALSE) THEN
  apex_util.set_session_state ('FSP_AFTER_LOGIN_URL', l_host_url);

  END IF;

  END;

  */

  Login page: Default 101 - no change

  After (pg 102) login page: 2 password fields and a button "submit". The validation checks to see if the passwords match. If they do,
  then it executes the following process: apex_util.change_current_user_pw(:P500_NEW_PASSWORD);

  At the end of this process, he headed a branch of pl/sql: apex_authentication.logout(:SESSION,:APP_ID);

  Everything seems to work well - BUT my user (configured to change the password at the first login) is ALWAYS prompted to change their password after the first login. It seems as if the call to password_first_use_occurred never is true.

  To observe this behavior, please use customer user and password
  lisaf1: https://apex.oracle.com/pls/apex/f?p=53140:LOGIN_DESKTOP:104844892394198

  I still don't understand why the procedure did not indicate the flag correctly, but support for Oracle has been able to give me a solution. For those who are interested in the future - the solution was to set the workspace setting "require the user account Expiration and locking" to Yes.

  I didn't realize that this setting would influence the requirement for a user to change their password on first use.

• What cancellation would be paid should I cancel the month by month plan ' photography' after the first 14 days?

  Adobe said that after the first days 14 cancellation period of reflection would make me responsible for '50% of the remaining contract obligation '. I can't find another explanation as to what is the obligation of contract. Common sense would make me think that would mean 50% billable months remaining. However, the lack of transparency makes me suspicious that it could be defined as the total of the annual contract.

  Can someone tell me permanently? And show me where in the terms it says this?

  Thanks in advance

  R

  The contract is for 12 months. If you cancel after cooling then you pay 50% of however much of the 12 months is remaining.

  Adobe - General conditions of subscription

• After the first year student delivery extension

  I bought Adobe Creative Suite student/teacher edition a year paid in advance, and I'm rather looking forward to it must be renewed this year. I'm still in College and the creative suite is vital to my curriculum and the courses that I am enrolled in. Is it possible to continue the student before her rate rises after the initial of a year?

  The introductory rate of $19.99 / month (with an annual commitment) for students to save 60% on the price for the first year. After the first year, we will renew your contract automatically for another year at the standard student monthly price then in effect once we have checked your student eligibility (currently at $29.99 / month) unless you cancel. Once you're more student, the price goes to the standard price (which is currently $ 49.99 / month).

  Please visit the FAQ of the teaching Creative Cloud for business / training FAQ

  You can see the plans and buy a subscription to creative cloud here:

  http://www.Adobe.com/creativecloud/buy/students.html?promoid=KSPAR

  https://creative.Adobe.com/join/edu

• Renew the student/teacher discount after the first year?

  G ' Day.

  In the terms, it says that the subscription will increase to compensation lump sum and then after 12 months, I was wondering if the student/teacher discount is renewable after your first year so you can continue to pay the reduced fee as long as you qualify what he? I am a teacher and I use adobe products occasionally.

  See you soon!

  Hi Justin

  The offer of a $14.99 student/teacher of promotional pricing for the first year only.

  After the first year you renew at the price standard student/teacher this plan which is currently a $ 24.99.  It is always a reduced rate compared to the regular (no student/teacher) price plan.

  I hope this helps.

  Thank you

  Bev

• black screen in the window of the program after the first pro cs6 update.

  I worked several months without any problems before this update... Now I can not find which version I had before...

  I have a black screen when playing and the screen of the program after the first pro 6.0.3, 6.0.4 cs6 and 6.0.5 update.

  Reading appears when I turn renderer for CPU, but I have tons of projects already rendered GPU and it slowes my work down.

  I can't use 6.0.0 and 6.0.1 because there is no support CUDA for my GT650M and there is no 6.0.2 for Windows

  What am I supposed to do?

  I followed on my Dell 7720 material:

  Windows 7 sp1 64-bit

  CPU i7-3630QM

  16 GB of ram

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M

  FINALLY I FOUND THE SOLUTION!

  This problem appeared after Premiere Pro cs6 update 6.0.5. and Nvidia graphic drivers at 320... then 331,65. Reading CUDA started working correctly when I reinstalled the graphics drivers Nvidia 307.07 old. It was very unsupposed problem. NEVER DAY drivers and the system until that your projects are completed!

  Thank you very much for the help!

• Shared Object skip intro after the first visit

  I hope that you guys can see something that I am missing. I want to skip the intro of the film flash after the first visit, so that the user does not see the intro to main site.

  I have the code on frame 1, an flv on frame 2 intro below and the main site on frame 3. Code seems perfect and straight forward, why it does not work for me. I have a stop(); on image 2 and 3, but I removed them to see if that would fix it, but no luck.

  _so = SharedObject.getLocal ("skipIntro");

  _introcheck = 0;

  If (_so.data.introcheck! = _introcheck) {}

  _so. Data.introcheck = 0;

  _so. Flush();

  Intro was not played

  gotoAndStop (2)

  } else {}

  Intro was played

  gotoAndStop (3)

  }

  Test your swf file by using the following twice.  Copy and paste the text in the output panel:

  _so = SharedObject.getLocal ("skipIntro");

  _introcheck = 1;

  If (_so.data.introcheck! = _introcheck) {}

  trace ("the game intro")

  _so. Data.introcheck = 1;

  _so. Flush();

  Intro was not played

  gotoAndStop (2)

  } else {}

  trace ("fried intro");

  Intro was played

  gotoAndStop (3)

  }

• video gets sent back to the main menu after the first chapter

  Last night, I burned this DVD and it was perfect - no error message to check the project.  It burned on a disc very well.  Then I went to bed happy.  I woke up and popped the DVD in a DVD player.  When I hit the play movie button, it plays a chapter only before returning to the main menu.

  So I went to the scene selection, and when I choose the 1st chapter to look at, it's going to do the same.  After the first chapter, it goes back to the main menu.

  If I choose the 2nd chapter, he continued to play through the video normally.

  It makes me carzy, so I thought that I was watching the movie in the preview.   Sound disappears and the video freezes for the first chapter.

  Here are some screenshots of my project and the flowchart:

  

  

  

  Any help is very appreciated.  Thank you!

  Edited to add: after preview freezes, and I close out of it, he says: "unspecified error of drawing."  I just made another preview, just to play the movie and the sound was there, but it froze after a little in the chapter.

  The complete project JPEG is too pixelated to really say much about it and the linked version has a header error and does not open. Can you redo this JPEG and maybe use a PS JPEG about 9 frame? It would also be useful to have a close-up view of the timeline with chapter markers.

  Now, what are the Actions of end for each of these chapters?

  For the Play of All, have you looked in a chapter Playlist? If you create one, with the chapters in any order you want, and then set end of Playlist Action chapter to return to your main Menu, "replacing" the end of chapter Actions. NOTE: I use the term 'override' as a verb and the noun "ignore."

  Regarding replacements, this sounds like there might be still a TAPI on. They can be applied in many places, and it's a bit of work to check all the buttons, chapters, timelines, etc.. They can be literally anywhere and should not be used.

  Forward the new screenshots. Might be something obvious here.

  Last question: how long is your first chapter?

  Good luck

  Hunt

  PS - most of us ignore an "answered", or similar icon and read almost all the wires without worrying.