BSOD and reboot loop

Similar Questions

• Tried to update in Windows Vista Home Premium, stuck in the "Configuring updates" and "reboot" loop 11/05/2011

  Hello! I have a portable M-6752 Gateway under Vista Home Premium.  It was perfectly functional this morning 11/05/2011.  Then I noticed the sign (of exclamation in a circle) who said the new updates.  So I started the update and thought nothing of it.  It was until an hour later and I realize that my laptop was still updated.

  Right now I am stuck in a loop between "Configuring updates: stage 3 of 3-0% complete.»  Do not turn off your computer' and auto restart.
  I tried to restart in 'safe mode' and 'safe mode with network.  These attempts did not help.  I'm still stuck in the loop and my laptop is overheating.  The only thing I could do was to be able to.  Fact that several times already.
  Fortunately, I have another laptop and is able to ask for help.  Can someone help me?  I'm NOT a technical person.  Thank you.

  Thank you, but my laptop WAS running Service Pack 2 when this problem happened.  It has been resolved.  For anyone having this problem, here is my experience and solution.

  When I found myself stuck in a loop and my laptop keeps restarting without giving an error message, it began to overheat.  I turned off.  When I turned on it again the screen "Advanced Boot Options" appeared.  I chose 'Safe Mode'.  Then, I went to "Configuring updates...". ».  Machine started himself reboot again.  It happened a few times.  Finally I had to turn the phone off again.  All of a sudden when I turned on again, the "Windows Error Recovery" screen comes on.  There is a choice, 'Launch Startup Repair'.  I chose this.  Machine asked me if it is allowed to create restore point.  Of course.  Then I GOT!  I was saved by Windows self-diagnosis program.
  If you are not familiar with the screens that I mentioned, please search 'screen name' and the word 'image' as a whole.  You will see what these screens look like.
  Now I realize there is another way to reach the Startup Repair.  When you turn on again, press the F8 key several times.  Which will bring you to the early Startup Options screen.  On advance Boot Options, there is a choice 'repair your computer', scroll down to this choice, press ENTER.
  Turning off my machine during the restart is another way to force the "early start Options" screen appears.
  I read that some do not have the "Repair your computer" option according to your PC in the screen «In advance Startup Options»  You will need to know how to get to the "Windows Error Recovery" screen.
  As a last resort, you can restart Vista recovery disk.  Many manufacturers do not understand that when they send the PC for you.  However, it is available for download for free on the internet.  You can download and make your own within 30 minutes.  I hope this helps!

• WAG160N only restart (reboot loop)

  Hello

  A few years ago, I have buyed a WAG160N I have ever used, because once I have plug power, it began to restart and reboot loop...

  Is there something to do with it, or should I put it in the trash?

  Firmware using is probably Ver.1.00.15

  Any help please?

  I have never received no new support from Linksys at the Morocco...

  Thank you

  Cedric

  In this case try changing the plug. Try to do 30/30/30 hard reset. The following procedure will clear the NVRAM and set the router back to the default values:

  ~ ~ With the power on, press and hold the reset button the back of the unit for 30 seconds

  ~ ~ Without releasing the reset button, unplug the unit and hold reset for 30 seconds

  ~ ~ Plug it now ALWAYS reset button a final 30 seconds...

  After the following procedure to reconfigure the WAG160N. If the problem still persists, then try using a different power of the same specifications adapter.

• The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

  It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

  Hello

  Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

  On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

  Occasionally (about 1 in 20 restarts) it would blue screen with an error:

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

  But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

  I tried a lot of things to sort it, including:

  (1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

  (2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

  (3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

  Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

  I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

  I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

  I guess the widowed causes 10 to do a restore, then the restore fails.

  Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

  If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

  I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

  Thanks in advance,

  Julian

  Woo Hoo, I've solved the problem!

  I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

  It took me 4 days of downtime...

  I hope this helps someone else.

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After installation of updates, received the critical error, then stuck in a reboot loop, Windows Defender now firewall and Security Center are all off

  I recently downloaded updates from microsoft. One of them was Security Essentials. Well, when I did caused a critical error. My laptop shut down and restarted. then gave me the same error message and rebooted again. He kept in a continuous loop. I tried the system recovery, but that did not work. I managed to get him to stop, but now my firewall is disabled and the Security Center and Windows Defender. If I try to turn it on, it does the same thing again. I don't know what to do to solve this problem. I need help!

  Original title: critical error

  Hello

  1. you have any multiple security software installed in the computer?
   
  2. What is the exact error message?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Disable all third-party antivirus programs
  
  To disable a firewall, antispyware or antivirus program, right click on the appropriate icon for the firewall, anti-spyware or anti-virus program in the notification area in the taskbar. Then, click exit or click disable.
   

  a. in Windows Vista, click on start toreduce this includes this image, type appwiz.cpl in the Start Search box and press ENTER.

  b. in the list of installed programs, search for and then click on the program in question, and then click Remove.

  c. restart the computer.

  Note After you uninstall a third-party antivirus software, contact the manufacturer of the program or visit the company's Web site to see if a cleaning tool is available to help you remove any remaining files.

  Step 2

  See services

  a. click on start

  b. type services.msc

  c. navigate to the Windows event controller (right click on and select properties)

  d. set the startup type to automatic, start the service, click on apply and OK

  e to navigate to the Base filtering engine (right click on and select properties).

  f. set the startup type to automatic, start the service, click on apply and OK

  g. navigate to 'Windows Firewall' and select Properties (right click on and select properties)

  h. set the startup type to automatic, start the service, click on apply and OK

  Method 2

  Start your computer in a clean boot to avoid conflicts with third-party software.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135
  
  Note: follow step 7 of the article mentioned above to start the computer in normal startup, once you have completed the necessary troubleshooting.

  Method 3
   
  Look for errors in the event viewer.
   
  Please check the Event Viewer logs to find errors in application logs.
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Please post the results for a better understanding of the problem causing the reboot.
   
  Hope this helps

• Computer randomly stops and goes into a reboot loop

  Original title: computer stops randomly on its own.

  When my computer is running, it will restarts randomly.  Any suggestions on why he can do this and how can I stop doing that?  Thank you!

  Hello
   
  1. do you remember any changes on your prior approval to question that occur?
   
  In the meantime, follow these steps and check.
   
  Step 1:
  
  You can check if you can "disable automatic system failure reboot " from the options in advance. In this way the computer will not go into a reboot loop and you will be able to note the error code, if any. If you see no error code, you can answer comes back with the error code.
   
  Step 2:
   
  I suggest that you start your computer in safe mode and check if the problem persists.
   
  Step 3:
   
  If the system works fine in safe mode, I suspect that there could be a conflict of software of third party causing the problem to occur. I suggest that you start your machine in a clean boot State.
   
  Note: Follow step 7 to your computer as usual.
   
  See the below article access in Event Viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• my windows doesn't want to or can't set up an upgrade, it keeps on rebooting loop and he stayed even 0% and I can't seem to windows

  I really need a way to get windows to stop trying to configure this update...

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• BSOD and computer keeps freezing/reboot

  Dell Laptop Inspiron 15 3521

  Windows 8

  Fighting a month ago or if my computer just randomly stopped working. I don't know what happened. I tried to restore it to the condition of the manufacturer, but it did nothing. He freezing guard, sends me a BSOD and does not connect to the internet.

  Here is a GoogleDrive of all my dump files:

  https://drive.Google.com/folderview?ID=0Byfl_FZyIYPKeXhzMEVTbUduX3c&USP=sharing

  any help would be appreciated!

  Hello

  WHEA_UNCORRECTABLE_ERROR (124)

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  Error checking 124, {0, fffffa80057b78f8, 0, 0}

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa80057b7a08
  Article @ fffffa80057b7b90
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Clock (Proc 2 Bank 3)
  Status: 0xbe00000000800400
  Address: 0x00003801d2454363
  Misc.       : 0x000000000003ffff

  Internal processor timer has failed, specifically processor cache and #2 Bank #3.

  ----------------------------

  There is that for as much you can do with a bug like this control until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 software conflicts that cause usually * 124 bug controls must OS utilities BIOS manufacturer like Asus AI Suite. If you have something like this software-wise, remove it as soon as POSSIBLE.

  5 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• Y700 m2 upgrade - continuous reboot loop cycle?

  Hi all

  I recently bought a Y700 laptop with a 128 GB m2 and 1 TB hard drive.

  I found that the 128 GB drive is just about acceptable, but as I do photography editing, the drive working essentially consumes the rest 30 GB I have free instantly. I would also like a little more room for manoeuvre for failing to manage the storage space so closely.

  So I bought the following:

  Samsung SM951 M.2 PCIe SSD 512 GB
  SM951 Series MZHPV512HDGL-00000
  Capacity - 512 GB

  I read NVMe version is not supported, but I assumed it would work.

  I tried to use Acronis True Image clone/backup the existing drive, actually a recovery disc and used to restore the backup to the new drive. So far, everything seems to work.

  However, after reboot, first of all, I got a BSOD message saying "Inaccessible_boot_device" and then the system reboots. At this point the loop starts, the screen shows the text "LENOVO" on black for about 10 seconds, switches and 2 seconds later goes on to repeat the process to infinity.

  Thinking it was a problem with Acronis, I tried to use the Installation of Windows Media disc for just fresh install windows on the disk. Once again, everything seems to work and has been installed properly. However once the installation has been completed, once again reboot loop began.

  I must add that when the loop runs, hitting F2 or any other key does not work, so I can't access the bios to tell the computer to boot from a key USB etc. To exit the loop, I have to power off the laptop and remove the offending SSD drive and then restart. At this stage F2 works, allow me in the BIOS to re - assign the USB as a boot priority to try to restore media etc.

  I also tried to do "repair Windows startup", but after a few minutes, the repair process said that he could not repair the drive.

  At this point, I wonder which of the following occurs:

  1 drive is defective

  2 - the drive is not compatible (material)

  3. drive is incompatible because of outdated drivers (the laptop is 1 month old)

  Any help you offer is appreciated, because I doubt now, I can return the drive given the way it has been used now!

  An apparent difficulty has been to change the UEFI boot to legacy mode, but I kept the UEFI as first priority in the boot sequence. Things seem to work fine now.

  Weird that the 128 GB m2 player provided by Lenovo was beautiful on UEFI, yet my 512 GB there is no work?

• Alureon Trojan & reboot loop

  My asus laptop (3 years) a 'alureon trojan', my anti-virus figure it out this morning. But now, my laptop is in a continuous reboot loop and I can not even past. I tried connecting all modes and it restarts just my computer. I don't know if it's the job of the Trojan horse (I am not very well informed on computers) or something else, but if it isn't then I can't even past the BSOD page to fix my Trojan? Can someone please help? I don't need to work I just want the BSOD. I reformat my laptop but I have some very important pictures (sentimental) that are only on my computer.
  Can someone help me please?
  Thank you
  Camille

  You can use the Microsoft Standalone System Sweeper to try to remove the Trojan horse without starting Windows.

  If System Sweeper cannot repair your computer, you will need to use a Linux system on a CD or USB stick to copy your photos from the hard disk before get back you in shape. Post back for more if you need to do.

• 0 x 00000024 reboot loop

  I rebooted Vista recently it was very slow, and it got stuck in a continuous reboot loop. Startup Repair also fails to load correctly and restarts until I can do something with it. They showed me a BSOD with an error message after turning off the auto reboot:

  Stop: 0 x 00000024 (0 x 00190444, 0x86ec9940, 0xc0000102, 0x00000000).

  They tell me to run chkdsk, but don't know how while I can't in Vista at all.

  Safe mode is stuck at crcdisk.sys and restarts.

  Any ideas? How can I run chkdsk without going into Windows?

  Thank you

  Hello

  Check the following message methods to check the disc including making a repair disk.
  Some discs of diagnosis of the auto manufacturer to start.

  -----------------------------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods to solve problems
  BlueScreens - answers top 3 (+ 1 more).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  ------------------------------------------------------------------------------------------------------------------------

  Alteration of the disc or the material associated with the operation of disk (hard drive, wiring and controller of the motherboard),
  lack of enough system memory, BIOS and antivirus/antispyware/security programs may have a role.

  ------------------------------------------------------------------------------------------------------------------------
  
  BCCode: 24 0 x 00000024

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error

  Solve the problem

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. RunChkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  To solve a problem of impoverishment of nonpaged memory: Add new physical memory to the computer (which increases the amount of memory available to the kernel nonpaged pool), or reduce the number of files on the volume Macintosh (SFM) Services

  Schedule chkdsk to run at next boot (checkdisk).

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  BCCode: 24 0 x 00000024<-- read="" this="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votes

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Stucks L50 - A satellite in reboot loop

  My L50 - A Satellite is stuck in a reboot loop. I put the computer off and drained the battery.

  Whenever I have it plug in I see the opening screen Toshiba (with no invitation to press F2 to pass set up) then it goes back to the reboot screen.

  I tried via a recovery bootable on USB but t does not work.

  What is there to do?

  > I tried to use on a USB key bootable recovery but t does not work.

  I assume you tried to reinstall the original recovery image. It should work.

  Enter the BIOS and set it to default settings. After that restart your computer and press F12. Choose the USB device as the boot device and try to restart recovery image installation.

• T440s Windows 10 Realtek Audio reboot loop

  Have downloaded the latest driver audio realtek 10 Windows on lenovo and site when you install the driver that there is a message like

  "the driver installation is a process of the 2 step, 1) uninstall the current driver and restart 2) installation of the new driver.

  The works of uninstall and reboot happens, but after that start again the new driver won't install-, instead, the exact same window appears on uninstallation, to an endless reboot loop.

  All the patches?

  OK I seem to have installed now.

  Two drivers are available for download on the page drivers lenovo, I installed the one older followed by the most recent and that worked.

• Computer goes into a reboot loop after installation of an update

  Original title: Windows Update on August 12, 2011

  My laptop has done a windows update this morning, don't know what he did, it was very fast now, everytime I turn on windows trying to open then fails and continues to do this in a loop.  Please no technique with the help of numpty here!

  Hello

  1. what update has the problem from occurring?

  Follow these steps and check if the problem persists.
   
  Step 1:

  
  You can check if you can "disable automatic system failure reboot " from the options in advance. In this way the computer will not go into a reboot loop and you will be able to note the error code, if any. If you see no error code, you can answer comes back with the error code.
   
  Step 2:
   
  I suggest that you start your computer in safe mode and check if the problem persists.
   
  Step 3:
   
  If the system works fine in safe mode, I suspect that there could be a conflict of software of third party causing the problem to occur. I suggest that you start your machine in a clean boot State.
   
  Note: Follow step 7 to your computer as usual.
   
  See the below article access in Event Viewer.
   
  Open event viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

  Step 4:

   
  Updated version has a problem in the history of the update.
   
  a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.
  (b) in the left pane, click view update history.
  c. to display more information about an update, double-click it.
   
  Do System Restore to the point that your computer worked very well and install updates manually ensuring that do not install the problem causing the update unless it says 'important update '.