BSOD and vwifimp.sys driver

Similar Questions

• Driver_Power_State_Failure BSoD and ndis.sys

  I know there are many of these failures BSOD posted, but I can't seem to find a solution. BlueScreenView said that this Driver_Power_State_Failure is associated with ndis.sys and ntoskrnl.exe. I put the dump herefile. Any thoughts would be great. I got this crash (twice now) on a computer for deployment on the ground at the edge of a river and is connected to a camera that records continuous underwater video. The videos are written on an external hard drive, and I am on Windows 7. The crash occurred several hours after the start of recordings (15-20 h). A program I use breaks images into files of 3 hours. Thank you.

  Post proposed by the host to the appropriate forum category (Windows / Windows 7/Hardware & drivers for Windows/Windows 7 / Performance & system failures). ***

  Hello

  9F error checking, {3, fffffa800804aa10, fffff800019783d8, fffffa800a6fa1a0}

  Probably caused by: pci.sys

  PCI.sys is a component of Windows which means than anything else he has led astray. Further analysis indicates the b57nd60a.sys driver Broadcom NetXtreme Gigabit Ethernet.

  [IRP_MJ_POWER (16), IRP_MN_SET_POWER (2)]
  E1 0 fffffa8008c1c050 fffff80001f1f210-fffffa8009252180 00000000 success error cancel pending
  \Driver\b57nd60a

  b57nd60a.sys 04/09/2012 Driver Broadcom NetXtreme Gigabit Ethernet.

  As you run a MacBook Pro, you need search updated with Apple and Broadcom drivers.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• BSOD and Realtek AC97 Driver

  OK, I have this problem... I got crackling with music and I thought it was the driver. I uninstalled it (I had SoundMax Integrated Digital Audio). That I wanted to install it again with Driver Reviver. It shows me driver AC97 and when he moved, he gives me BSOD. I didn't give any sound and in the Device Manager, there are triangle with exclamation mark in it and she said multimedia Audio Controller. And in the details of the driver I am Realtek AC97. I ran everest and is the Foxconn AwardAcpi motherboard, that's what he said. Thanks in advance. BTW I reinstalled Windows (XP SP3 sound) and it gives me this error again.

  Please do not ever under any circumstances use driver updating software. They wreak havoc on the machines.

  Always install sites for manufacturers.

  Please start without failure + networking mode. Copy the last 3 C:\Windows\Minidump files on the desktop.

  Download them on Sky Drive and then paste a link here to them

  -----------

  When doing with it, visit the website of your motherboard for your model. Download and install the latest audio driver for XP.

• Qosmio X 770-BSODS and Crash Dump driver failed to load

  Hello

  I have a Qosmio X 770 and his blue screening occasioanly but I can't find out why as the crash dump driver fails to load at startup.

  I gave google and tried to recreate the page, Delete file, it restart, rebuild again, affecting also devote dumpfile in the registry and still at every start I receive event ID 45

  The system could not sucessfully load the crash dump driver.

  I ran SFC and all files are very well

  Windows 7 64 bit, core operating system

  someone at - it ideas?

  Thank you

  Found a user who had the same problem with the dump file, and this could be solved by deleting the swap file, and then restore and after that seems to have solved the problem...

• BSOD: hiber - iastor.sys driver unloaded without cancelling pending operations

  Does anyone have a solution?  Other errors: Error Page in the area non paged and kernel data inpage error.  Only, I get these errors after the computer has been on 'sleep '.  I looked in the various committees and the only answer I found is to uninstall the
  'security' and replace it with another.  The extended Self Test and the stress test of memory reveal nothing wrong.  I used all the MIcrosoft FIX IT tool.  NOTE: This is after a complete system recovery and return to the top.

  No, but I could uninstall again.  Files in Disk Cleanup: dump files mini system error, memory dumpfiles, user window, windows system error report error report.  I don't know if they have what you are looking for.  I'll try uninstall again.

• I get BSOD on windows 8 and the STATE DRIVER FAILURE error. What should I do?

  I get BSOD on windows 8 and the STATE DRIVER FAILURE error. Never, it happens every time I got close the lid of my portable computer or attempt to put it to sleep. If it helps I have an ASUS S56C ultrabook. I have read other forums and noticed that this problem is related to my minidump file. The link is https://skydrive.live.com/redir?resid=B33EC443BFC08CAF! 239 & authkey =! APosKb0gDrCL_7M. Thanks to all those who can help you

  Hello

  Since there is a new check laptop with the seller and ASUStek support for warranty
  repair. As OEM ASUStek is responsible for the good operation of the equipment both
  and Windows. Keep in mind do you more they tell you it's something
  you did it. Added that even if you are somehow able to solve the problem you
  would that he documented in the case of other problems on the road.

  ASUStek support
  http://support.ASUS.com/

  ASUStek Forums
  http://VIP.ASUS.com/forum/default.aspx?SLanguage=en-us

  ASUStek drivers
  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

  =======================================================

  If you really want to solve the problem (which I do not recommend on a new computer
  under warranty):

  Results verified BlueScreenView WinDBG / DumpCHK.

  The Bug_Check has been iaStorA.sys 9F CAUSE i.e. technology Intel Rapid Storage Technology driver.

  9F error checking, {3, fffffa80121cf7f0, fffff800af4687e0, fffffa8013b01c60}

  Probably caused by: iaStorA.sys
  FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  BUCKET_ID: 0x9F_3_POWER_DOWN_IMAGE_iaStorA.sys

  iaStorA.sys as of the 09/07/2012 which is Intel Rapid Storage Technology driver.

  fffff880 ' 01638000 fffff880' 01902000 iaStorA T (no symbol)
  Loaded symbol image file: iaStorA.sys
  Image path: \SystemRoot\System32\drivers\iaStorA.sys
  Image name: iaStorA.sys
  Timestamp: Wed Jul 09 13:42:33 2012 (4FFB4239)

  Collate ASUStek support, their drivers and documentation online and ask for their
  Forums about known problems.

  BiosVersion = K56CA.206
  BiosReleaseDate = 21/08/2012<- bios="" is="" fairly="" current="" however="" there="" may="" be="" an="">
  most recent version. Also check updates the chipset drivers and other key embedded
  and separate device drivers.
  SystemManufacturer = ASUSTeK COMPUTER INC..
  SystemProductName = K56CA
  Family = K
  SystemVersion = 1.0
  SystemSKU = ASUS-NotebookSKU
  BaseBoardManufacturer = ASUSTeK COMPUTER INC..
  BaseBoardProduct = K56CA
  BaseBoardVersion = 1.0

  ASUStek links above.

  After checking with ASUStek and if necessary to check updates with Intel.

  For the Intel driver update utility<-- run="" this="" after="" checking="" with="">
  http://www.Intel.com/p/en_US/support/detect?redirector_count=1&

  Intel - <- also="" search="" here="" -="">Quick storage drivers Download Center.
  http://Downloadcenter.Intel.com/

  Forums and Intel - Support - community
  http://intelopenport.hosted.Jivesoftware.com/Community/Tech

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• dxgkrnl.sys and atikmdag.sys BSOD

  Well, a few months ago, that my pc started having BSOD, first I thought that it was a power supply problem, because I had a generic power supply, I was wrong

  Then began to study some more and found out it was my video card

  Running BlueScreenView told me that atikmdag.sys and dxgkrnl.sys cause a disorder
  is not the first time that I see those, on every single bsod I have is the same atikmdag.sys or simply, I reinstalled drivers AMD a lot with no satisfactory results

  Here are the last 3 dump files

  today ' today/yesterday

  https://www.mediafire.com/folder/yocv4klc6gpvn/dump

  Hello

  The last DMP file attached is the verification of bug THREAD_STUCK_IN_DEVICE_DRIVER_M (100000EA) .

  This indicates that a thread in a device driver that runs constantly.

  0: kd > k
  Call child-SP RetAddr site
  "fffff880 ' 0599 c 398 fffff880 ' 038e95bb nt! KeBugCheckEx
  fffff880 '0599c3a0 fffff880' 038f3672 dxgkrnl! TdrTimedOperationBugcheckOnTimeout + 0 x 37
  fffff880 '0599 c 410 fffff880' 046504 d 3 dxgkrnl! TdrTimedOperationDelay + 0 x 11192
  fffff880'0599 c 460 00000000 00000000' atikmdag + 0x434d3

  We can see that the AMD/ATI video driver runs constantly, recovery Timeout detection is called to try to recover the display driver. He cannot, then he goes ahead and check bug.

  ----------------------------------

  1. AODDriver2.sys is listed and loaded into your list of modules is AMD Overdrive; also in EasyTune6 for motherboard Gigabyte. Known issues in Win7 BSOD and 8.

  Please uninstall two software ASAP! If you do not find a software to uninstall, or is not installed, please navigate to the following path:

  C:\Program Files ATI Technologies ATI. ACE\Fuel\amd64\AODDriver2.sys and rename AODDriver2.sys AODDriver.2old and then restart.

  2. make sure you have the latest video card drivers. If you are already on the latest graphics card drivers, uninstall and install a version or a few versions behind the last to make sure this isn't a last number one driver. If you have already experienced with the driver of the card later and earlier versions, please try the driver beta for your card.

  3 if the above fails, your video card is defective.

  Kind regards

  Patrick

• Re: A500 - 1 H 6 * BSOD and Nvidia driver problems

  Hello

  A few months ago I bought a Satellite A500 - 1:6 and I am almost happy with it. In fact, I have 2 problems:

  1 - from time to time, the screen goes black for a few seconds and comes back to life after showing + a message on the Nvidia driver which has failed, but was back +. I tried to update the Nvidia driver, but it was even worse.

  2. when I use wi - fi, most likely my laptop eventually freezing for a few minutes, then followed by a BSOD.

  I don't know if it's relevant, but I had to update the BIOS when I bought because there was another problem (the laptop awake by itself, early in the morning).

  If anyone has an idea that I can solve these problems, that would be greatly appreciated. Thank you.

  Mike.

  Hello

  > I tried to update the Nvidia driver, but it was even worse.

  Are you talking about the toshiba page vga driver? I have fixed BSOD for a500, update driver vga nvidia.com, about 6 months ago and since away once no BSOD more.

  > 2 - when I use wi - fi, most likely my laptop will end up freezing for a few minutes, then followed by a BSOD.

  try to update.

  > I don't know if it's relevant, but I had to update the BIOS when I bought because there was another problem (the laptop awake by itself, early in the morning).

  something like this is described here:

  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=76

• Need help, move, or delete the file hiberfil.sys and pagefile.sys to reduce the free space in C: drive

  Original title: need assistance to move or delete hiberfil.sys and pagefile.sys

  Is there anyway I can move or remove 2.43 GB hiberfil.sys and pagefile.sys 4.39 GB in a defferent drive because I'm running out of space on my C: drive?  They take so much space.

  See this tutorial to move the swap file, however, I recommend have at least a 900MB

  pagefile on the C: drive to allow the creation of a dump in case of problems with the system file.

  http://www.Vistax64.com/tutorials/132201-virtual-memory-paging-file-change.html

  To delete the hiberfil.sys, you must disable hibernation. It cannot be moved.

  http://www.SevenForums.com/tutorials/819-Hibernate-enable-disable.html

• BSOD (DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys)

  Hi, I am facing the problem of BSOD - DRIVER_IRQL_NOT_LESS_OR_EQUAL igdkmd64.sys on my laptop (HP ENVY 15-j126tx)

  OS: Windows 8.1

  Intel HD Graphics 4600 with the version of the driver 10.18.10.3277

  I try updating the driver, but the problem doesn't seem to be resolved. I also try to restore the pilot but after cancellation, I have been unable to adapt to my screen resolution and brightness (I'm not sure he always get BSOD DNon).

  What should I do to fix this?

  I hope that it was able to solve this problem with the resolution of the screen and able to adjust brightness.

  Thank you.

  Can be resolved by updating the driver manually by using the Device Manager.

• Some rather illusory BSOD and crashes on windows 7.

  So for the past month I have been doing some strange crashes and BSOD that have been in every sense. I've been on Reddit and impossible to get a solution, I have reformatted, which does not set it. I've been on with the technical support of Microsoft support chat and can not get a definitive answer (they spend hours and a symptom of trouble then send me on my way). Accidents and the BSOD happen a crapton all in one day, it's good for several days, then it's a crapton while a new day. I just assumed it was graphics so I uninstalled and reinstalled. No solution. I assumed it was ram, so I change RAM, using just a single chip, get chips on other computers, including the chip switch is in what location, perform a test of memory, no solution.

  Apart from just BSOD I have therefore also get those pips weird screen that blur the screen and resemble a classic movie scene where a security monitor is hacked. Or sometimes I can be working away and suddenly the computer starts up without ever giving any warning or anything.

  Here are the BSOD logs that I have. He did TONS more than that, but more often it does not really give me a journal later.

  Crash Dump Analysis

  Crash dump directory: C:\Windows\Minidump

  Dumps are enabled on your computer.

  Thursday, October 6, 2016 10:33:43 PM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: unknown (0xFFFFF80002D38344)
  Bugcheck code: 0x3B (0xC0000005, 0xFFFFF80002D38344, 0xFFFFF880067AAD40, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: SYSTEM_SERVICE_EXCEPTION

  Thursday, October 6, 2016 20:18:22 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100616-25740-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0 x 70150)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Monday, October 3, 2016 17:22:27 CEST your computer crashed
  crash dump file: C:\Windows\Minidump\100316-48391-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800490080C, 0xFFFFFA8007F784E0, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Saturday, September 24, 2016 9:53:06 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092416-62416-01.dmp
  This was probably caused by the following module: atikmpag.sys (atikmpag + 0x780C)
  Bug check code: 0 x 116 (0xFFFFF8800453A80C, 0xFFFFFA800D828010, 0 x 2, 0 x 0)
  Error: VIDEO_TDR_ERROR
  file path: C:\Windows\system32\drivers\atikmpag.sys
  product: AMD driver
  company: Advanced Micro Devices, Inc..
  Description: multi-vendor AMD driver miniport
  Bug control description: This indicates that an attempt to reset display driver and recover a timeout failed.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmpag.sys (AMD several suppliers Miniport Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. VIDEO_TDR_ERROR

  Thursday, September 22, 2016 6:59:12 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\092216-29250-01.dmp
  This was probably caused by the following module: tcpip.sys (tcpip + 0x52A73)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  path to the file: C:\Windows\system32\drivers\tcpip.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: driver TCP/IP
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Tuesday, September 20, 2016 17:47:17 this computer crashed
  crash dump file: C:\Windows\Minidump\092016-62213-01.dmp
  This was probably caused by the following module: ntfs.sys (Ntfs + 0x5A88)
  Verification of error code: 0 x 24 (0xFFFFF8800A5E5A48, 0xFFFFF8800A5E52A0, 0x1904FB, 0xFFFFF880012A94E4)
  Error: NTFS_FILE_SYSTEM
  file path: C:\Windows\system32\drivers\ntfs.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT file system driver
  Bug control description: This indicates there is a problem in the NTFS file system.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Monday, September 19, 2016 5:38:40 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\091916-39905-01.dmp
  This was probably caused by the following module: unknown (0xFFFFF880013E86E4)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error.
  Google search: KMODE_EXCEPTION_NOT_HANDLED

  Hello

  Although there may be other factors at play that video drivers ATI are involved as well
  Check with Support ATI, their drivers and documentation online and ask for their
  Forums about known problems.

  AMD/ATI - assistance and pilot - search
  http://support.AMD.com/us/psearch/pages/psearch.aspx?type=2.4.2&product=2.4.2.3.9&ContentType=GPU+download+detail&OSType=Windows+8+Preview+-+32-bit+Edition&keywords=&items=20

  Download the Catalyst Drivers here
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  ATI - Forums
  http://forums.AMD.com/game/categories.cfm?CATID=260&forumid=11

  ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  However, given that you re-installed Windows there must be a hardware or BIOS.
  driver Chipset or other very low level driver problem. So anything you can update and
  use the other methods below.

  ==================================================

  Resolution in Windows 7 stop errors (blue screen) - has a section because if you
  may or may not start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Vista and Windows 7 updated drivers love then here's how update largest. References to the Vista also apply to Windows 7.

  It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)

  This utility, it is easy see which versions are loaded: run DriverView - see
  Hide Microsoft drivers - updated those without drain in their names. (Also update BIOS and drivers from the chipset.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common. Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.

  Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.

  Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to turn off the pilot facilities in Windows updates, that leaves is to Windows Update, but it will not install the drivers who are generally older and cause problems. If updates offers a new driver and then hide it (right click on it), then go get new ones manually if you wish.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  Start - type in the search-> memory box - find top - right click - Memory Diagnostics tool follow RUN AS ADMIN instructions

  Windows Vista: How to scan / test your memory with Windows Vista memory or RAM
  Diagnostic tool
  http://www.shivaranjan.com/2007/11/01/Windows-Vista-how-to-scan-test-your-RAM-or-memory-with-Windows-Vista-memory-diagnostic-tool/

  How to run the diagnostic tool memory in Windows 7
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ================================================

  After doing ALL the updates you canand if the problem persists, run
  DriverVerifier.

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7. (8/8.1 and 10)
  are essentially the same).
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  https://msdn.Microsoft.com/en-us/library/Windows/hardware/ff545448%28V=vs.85%29.aspx?f=255&MSPPError=-2147217396

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message.
  Also check with MyEventViewer when the blue screen.

  If DriverVerifier creates a minidump download and post the link here so that we can
  analyze it.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• BSOD DRIVER_IRQL_NOT_LESS_OR_EQUAL (ndis.sys)

  Hello Microsoft community.

  Yesterday I installed Oracle VM and used for a short stint with no problem or what so ever, and all of a sudden today when my computer starts, I had this BSOD

  

  I have L17 no idea on what to do to solve this problem!

  Help: x

  They are related to your athrx.sys driver (atheros)

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• BSoD and lots of them.

  Met several BSoD and each different. Here is the link to the DMP: https://onedrive.live.com/redir?resid=C2F94FA31ADBC579%21161

  I checked the hardware, running w8.1 pro, speccs:
  AMD Phenom II x 4 965
  16 GB of DDR3 memory @ 669 MHz
  GA-890FXA-UD5
  AMD Radeon HD 6950
  250GB Samsung EVO 840 and 932 GB Samsung HD103UJ
  Corsair TX 750W

  When are the completely random BSoD, play games or just standing idle.

  Help, please.

  The debugging session: 20:16:21.525 Wed 28 may 2014 (UTC - 04:00)
  System Uptime: 0 days 0:08:00.383
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  BugCheck D1, {0, 2, 1, fffff800007ed78c}

  Cannot load the image \SystemRoot\system32\drivers\aswStm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for aswStm.sys
  ERROR: Module load completed but symbols can be loaded for aswStm.sys
  Probably caused by: aswStm.sys ( aswStm + c 578)

  Follow-up: MachineOwner

  aswStm.sys

  http://SystemExplorer.NET/file-database/file/aswstm-sys

  The debugging session: Wed 28 May 19: 05:15.236 2014 (UTC - 04:00)
  System Uptime: 0 days 0:15:36.996
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ....................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 3B {c0000005, fffff80001f0b60e, ffffd0002a01f170, 0}

  Probably caused by: atikmdag.sys (atikmdag + b860e)

  Follow-up: MachineOwner
  ---------

  0: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  System_service_exception (3B)
  An exception occurred during the execution of a system service routine.
  Arguments:
  Arg1: 00000000c 0000005, Exception that caused the error checking code
  Arg2: fffff80001f0b60e, the address of the instruction that caused the error checking
  Arg3: ffffd0002a01f170, address of the context record to the exception that caused the error checking
  Arg4: 0000000000000000, zero.

  Debugging information:
  ------------------

  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The memory could not be %s.

  FAULTING_IP:
  atikmdag + b860e
  fffff800'01f0b60e 488b 5918 mov rbx, qword ptr [rcx + 18 h]

  atikmdag.sys

  Description of the driver: Video driver ATI (remove the Catalyst Control Center and only install the display driver)

  Driver update site: http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Delete AVAST and replace it with Windows Defender.

  AVAST uninstall utility

  http://www.avast.com/uninstall-utility

  How to enable Windows Defender.

  http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  Uninstall and reinstall your ATI display drivers if there is no newer version.

  Delete...

  fffff800'012ea000 fffff800'01332000 dtsoftbus01 (postponed)
  Image path: \SystemRoot\System32\drivers\dtsoftbus01.sys
  Image name: dtsoftbus01.sys
  Timestamp: Fri Feb 21 04:49:36 2014 (53072130)
  CheckSum: 00047544
  ImageSize: 00048000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

  Description of the driver: Bus SCSI virtual DAEMON Tools driver
  Probable cause of BSOD in Windows (the first version of Win8) systems

  Driver update site: http://www.daemon-tools.cc/Eng/downloads

  0: kd >! SysInfo machineid
  Identification information of the machine [of Smbios 2.4, DMIVersion 36, size = 2871]
  BiosVendor = price Software International, Inc.
  BiosVersion = F6
  BiosReleaseDate = 11/24/2010
  SystemManufacturer is Gigabyte Technology Co., Ltd..
  SystemProductName = GA-890FXA-UD5
  Family =
  SystemVersion =
  SystemSKU =
  BaseBoardManufacturer is Gigabyte Technology Co., Ltd..
  BaseBoardProduct = GA-890FXA-UD5
  BaseBoardVersion =

  GA-890FXA-UD5

  http://www.gigabyte.com/products/product-page.aspx?pid=3417#OV

• BSOD and messages after closing.

  Hello

  Since I bought my new computer fixed I had trouble with BSOD and error message when you connect again.
  I downloaded my minidumpfiles on my SkyDrive if you would be kind enough to take a look, as I have no idea on what kind of things myself.
  I launch Windows 8 Pro x 64 if it is of no use.
  Thanks in advance!
  Here is the link: http://sdrv.ms/19POzN4
  Edit: The three minidumpfiles are different dates, but are probably not all different.
  -J

  Hello

  All attached files of the DMP are the error checking DRIVER_POWER_STATE_FAILURE (9f) .

  This bug check indicates that the driver is in an inconsistent or invalid power state.

  In all of your deposits, it is labeling the fault of the accident such as ViaHub3.sys which is the

  VIA Labs VL800 & VL801 Superspeed USB Host Controller Driver. Update this driver ASAP - http://www.gigabyte.us/products/product-page.aspx?pid=4642#dl

  ------------------------------------------------------------------------------------

  If we run one! IRP on the 4th parameter of the error checking (IRP address blocked), we get the following:

  > [16, 2] fffffa8009fb7050 0 0 00000000 00000000 - 00000000
  Failed to load image \SystemRoot\system32\DRIVERS\netr28ux.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for netr28ux.sys
  ERROR: Module load completed but symbols could not be loaded for netr28ux.sys
  \Driver\netr28ux

  netr28ux.sys is the series of Ralink RT2870 USB802.11n driver wireless card (you can have another manufacturer).

  ^^ If still crashing after updating your drivers controller USB, AVG is possibly cause conflicts.

  Remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes:

  -AVG removal tool http://www.Avg.com/us-en/utilities

  Kind regards

  Patrick

• Pavilion 2010ax g6: BSOD on install display driver

  I have hp laptop pavilion g6 2010ax with dual graphics (7640 G + 7640 M) and windows 7 ultimate 64-bit for about a year. Last week I had my motherboard replaced because of the defective audio port. After replacing the motherboard, I started having a BSOD after "starting windows." The engineer told me that my windows broke down and I need to reinstall it. After you have reinstalled windows (formatted my hard drive and start over), he started very well, but when I started to install the drivers (that I got from hp site -http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=5269648), he even once gave me the same BSOD on the next reboot. Then I logged in safe mode and after subsequent installation and uninstallation, stressed the graphics driver would cause BSOD (SYSTEM_SERVICE_EXCEPTION atikmdag.sys 0x3b).

  I tried a bunch of AMD Catalyst software, but none of them does not solve the problem. I even updated my BIOS (suggested by hp support assistant) but even that has not worked.

  Now my windows runs with graphic Standard VGA adapter and I can not play games, watch HD movies, adjust the brightness and I can't even put my laptop to sleep!

  So is this a harware problem or software problem and how can I solve it?

  Any help would be really appreciated.

  Hey akshayjin,

  The only other option to try to get the driver installed, without the BSOD error, is to perform a clean boot with no anti virus running. To perform a clean boot (msconfig), I've included the document «How to perform a boot in Windows» Please select your version of Windows and follow the steps. Once all the anti virus and the clean boot is finished, restart the computer. Once the computer to the top, try to reinstall the graphics driver.

  If you still get the BSOD error after the above steps, the next thing to do would be to contact the technical support to the 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl.

  Kind regards.