BSOD appears on Qosmio G30 during the recovery procedure

Similar Questions

• BSOD appears on Qosmio G30 during the recovery thread closed before the resolution

  I'm sorry, that I replied too soon!

  Whenever I try to install a fresh Windows Vista or use the recovery CD provided with my Qosmio G30 it shows me the BSOD...

  In all cases so I followed some instructions to install the RAID drivers as well and that seemed to work until to halfway through the installation it restarts (not restart usual as is normal in the installation of the OS) just randomly rebooted and said "start in safe mode / or nomally ', ' year error has occurred, insert your windows installation CD and click on fix my computer" I tried that for a while and he refuses to work all of a blow!

  Post edited by: farhan_l

  I couldn't t reinstall Win XP on my laptop because I used an old CD Win XP without SP2 preinstalled.
  After the installation XP rebooted notebook and the BSOD appeared.

  Finally I discovered I need an SP2. I ve understood my new XP CD using nLite software.
  You know this program? It s for free and can be downloaded from different websites.

• Satellite M45-S269 - A:\GHOST output. ERR during the recovery procedure

  I am trying to perform a full system restore. I get to the part that says "exit A:\GHOST. MADE A MISTAKE? »

  If I do Y or N the message says "cannot read files. If the problem persists, contact TOSHIBA support center or contact symantec technical support.
  Then the recovery fails.

  Clues?

  Hello

  Looks like it's not possible to read from the recovery disc.
  How did you perform the recovery procedure?

  You have inserted the right recovery disk and started from this disk. Right?
  Usually, recovery is expected to begin and the installation should run smoothly

  If this is not the case then recovery disks would be destruction, scratched, etc.

  Just a question; is it possible to start using other disk bootable CD original Win XP or Linux?
  Select this check box, because it would allow to discover exactly what s wrong

• Satellite 1100 keyboard froze during the recovery procedure

  I want to restart my 1100 satellite using the recovery CD. Unfortunately, I put in the wrong CD and the keyboard froze. When I start I press F2 to "start-up" but can't do anything after that.
  Any ideas how I can unlock things and back to normal?

  Hello

  Put the recovery CD in the CD/DVD player, turn on the laptop and immediately press the C button. keep it down for a few seconds and this will force to laptop to start select the CD/DVD drive as the first boot device.

• Satellite A100-153: Error Message appears during the recovery procedure

  Hello
  Please help me!

  I tried to recover my laptop with my original Toshiba recovery cd, but decompression 14% I got an error.., named:
  Windows - delayed write failed
  Windows was unable to save all the data for the file\Device\Harddisk\volume2\I386\OEMBIOS. Bl_. The data has been lost.
  This error can be caused by a failure of your computer hardware connection or a network. Please try to save this file elsewhere.

  So I don't know what to do...
  Is the problem that my hard drive is broken? but I don't think, because when I install with Windows XP Home Edition OEM I come up to 91% and then comes another error :((

  Please help me, anyone know what I can do?

  Please answer quickly... I need my phone tomorrow :*(

  Welcome, Tobias Erdmann

  Hello

  I guess you have you used original restore CD that was shipped with this laptop. That's why I put t thinks it is a CD problem but maybe with your HARD drive.
  Have you tried to format the whole HARD drive? Delete all partitions and format the HARD drive before installation

  If the OS install will not work or will divide in the middle of the procedure, then the material should be checked. The A100 is not very old unit and therefore the guarantee must be valid. If a new HARD drive is necessary you should get it for free.

  Good luck and please post if you know more details

• Message 'Unfair Machine' on Satellite M60 during the recovery procedure

  Hello.

  I would be very grateful if someone could offer me a solution or a Board with reinstalling Windows from the Toshiba product recovery DVD. After obtaining the motherboard on my Toshiba M60 (code PSM60A-0C7OOD) replaced I get the machine wrong message when I try to reinstall Windows.

  I read through the threads of the DMI was updated, but after trying to start the boot CD, I got the error message saying that 'no id of corresponding platform was found' and so am not able to do work. I don't know if it's because the Toshiba M60 is not supported by the dmi updates...

  I noticed that, in the Information System, the model of the system is listed as 0000000000000000000. Have I reason to think that this is the problem and if I could change that for the correct model number of product recovery DVD will work correctly.

  Thank you very much, Mike.

  Hello Mike

  I'm no expert, but as far as I know, a BAD MACHINE message will appear if the string DMI and the label on the image n t game. In my opinion, you should contact the service again and let write them DMI information. Obviously they forget.

• Equium A100-147: I get an error during the recovery procedure

  Hi again,

  I had trouble with my equium a100-147.
  I tried a restore, but the disc is scratched so I phoned in ESL and it snet me a new recovery image.

  I tried the new recovery disk and am now errors when I boot the disk.

  error is

  "internal error crc file: \WINDOWS\$NtUninstallKB895200$\msdtctm.dl.

  any suggestions are welcome. get really annoyed with my machine as my warranty expired only one month

  Thank you

  Hmm... I studied a bit and it looks a bit like a malfunction of the partition.
  It would be desirable to boot from the original CD of Microsoft XP and to start the repair console.
  Then you could try these various commands which help to repair the boot manager, repair errors, locate bad sectors and recover readable information.

  -fixboot
  -fixmbr
  -bootcfg /rebuild
  -chkdsk /r

  If this does not help, you should erase the entire partitions and must format the HARD drive in NTFS file system. Then access the BIOS and set it to the default value.
  Once this procedure tries to start again on the new recovery CD!

  Good bye

• Portege 3500 - hangs on step 8 during the recovery procedure

  Hello, I've had the laptop less hard drive, I have istalled a HARD drive is appropriate, but the external CD-ROM drive, it is the good, is not recognized.

  I followed these instructions:
  http://support.toshiba-tro.de/KB0/TSB6101CA000ER02.htm

  Everything is going well, but after step 8, I get A prompt:------> _ with the last symbol flashing, I entered C then U but I get the message: bad command.

  Could someone help?
  Thanks Richard

  Hello Richard

  You have created a bootable floppy using the downloaded exe file?
  Step 8, you must start your laptop using the as first boot device floppy drive. To force the computer laptop to use as first bootable device external floppy drive, you can use the button U keyboard initially upwards.

  When the laptop starts up and you press the U key disk into the floppy drive connected will start to read the disc. Is it exactly how it happened?

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• Satellite A100 system goes to a black screen after the recovery procedure

  I tried running the recovery CD, I received on my cell phone. the process perfectly, (I have only one CD, I don't know if I need a second). At the end of the process, I have the option to insert the second CD, or jump.
  Because I don't have that one CD I have support on ignore.

  I tells me that the installation is complete and I can restart my system.
  Then I removed the disk and I tried to reboot the system. The system goes to a black screen (on which he indicates that Microsoft load) and then crashes. That was the problem I was facing before recovery.

  Basically, the recovery process has not worked. I don't think I did something very wrong, unless I need a second CD. What could be the problem?

  Help me please!

  Hello

  The A100 is one of the new series of laptops and AFAIK the image of Toshiba was placed only on a CD (DVD) recovery.
  I think that the message and the possibility to insert the second CDconfuses a little.

  In my opinion the black screen and freeze has nothing to do with the recovery procedure and the new installation if Windows OS.
  Due to the fact that this problem has occurred until you have installed the OS from the recovery CD, I assume that there must be something wrong with the hardware.

  But it s very interesting to know if the same problem appears after the new installation of Windows from the original CD of Microsoft.

  It's worth a try.

• Satellite A100 loads the operating system correctly after the recovery procedure

  Hello

  I'm in trouble... I used the recovery CD last week after my laptop developed problems. After the recovery procedure, when I turn on the pc, it loads directly in mode 'Owner' - the pilot of the internet has no charge, Norton AV, supplied with the pc does not load. Basically, it's a shadow of his former self.

  And when I try and start the recovery process, that it doesn't... it does not read the disc.
  I know that the recovery process did not work properly cos when I look in C: it shows that 60 GB of data is present on the hard disk, so the recovery is not cleaned the hard drive at all.

  The only way I can describe it, is that the pc is in some sort of limbo. I can't access the original account I created.

  The recovery disk is still okay because I "explored" the drive on another computer and it contains all the data.

  Help, please.

  Looks a bit the problem I have with an A100 recovery disk. Mine formatted PC, unpack
  a load of stuff and then freezes.
  See...
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=31292

  Like you, I can read the DVD in another PC. I wonder if there is a batch of duff of recovery DVD?

  I think I'll try to install XP from a different installation disk. It'll be a bit of a pain in the neck
  because it will not authenticate with MS, but at least he's going to prove whether or not the hardware of the laptop is duff.

  I'll post back here when (if) I get anywhere.

• Satellite A30: HDD size after the recovery procedure and Defrag

  I have a Satellite A30 and just did a complete reinstall from the recovery of the product disks. My question relates to the amount of disk space hard should be resumed aftre reinstall it.
  My hard drive is 4.95 full GB according to the procedure that is much higher than I expected.

  Also, after reviewing the reader with Defragmenter I seem to have twice taken up training with Greens, unmovable files like Blue contiguous files. Unmovable files is there and if not how to I remove them?

  It's where I guess that extra hard disk space is lost when it is lost?

  Thank you

  Hello

  It's not easy to say exactly how much space should be taken after the recovery procedure.
  I have so much that I know on the recovery CD, you will find the whole operating system Windows XP, driver Toshiba and utilities as well as additional software like OneNote, WinDVD, etc.
  This additional software could take as much space on the disk outside the OS.

  Blue not moveable files belong to the Windows operating system, and as a result, the files are placed together.

• Satellite L350 - BSOD during the recovery and missing "BOOTMGR"

  Hello
  I have a Satellite L350, Vista Home premium SP1, (had it for about 4months)

  Yesterday I received an error black screen on my laptop it says to reboot, so I did, then just, my laptop wouldn't stat more, I have no idea why?

  So I put in my computer come with recovery disks laptop just reinstall every thing as if I just got it out of the box and I followed the instructions that the Recovery Wizard disk Toshiba says, and as his 'adaptation of the files', I get say Blue error screen "a problem has been detected and windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL".

  And tell to reboot or what ever and just keep it.
  (Info tech: STOP: 0x000000D1 0x00000002, 0x00000000, 0x8D246FD7)
  (usbccgp.sys - address 8D246FD7 base at 8D23E000, Datestamp 47919053)

  Then I reboot my system and a black screen comes up saying "BOOTMGR missing".
  So now, I have nothing that works, I retried the disks but same error with blue screen.
  I also tried to make the atmosphere safe and decent here, nothing works.
  I m needs help!

  Thanks for reading, sorry for so much reading to do

  The reason why laptop doesn t start (error bootmgr) while the installation is stopped with a BSOD. If you need to reinstall the laptop again.

  It looks like a USB problem because I found this in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/945436/en-us

  If you have connected the external USB devices to the laptop, remove them.
  In the worst case, there is something wrong with the USB ports or controller and the motherboard must be exchanged.

• Qosmio G30 212 - English recovery CD

  I'm looking for links to download the CD recovery for my Qosmio G30-212, but in English instead of French (which I have now).
  Does anyone know where to find CDs?
  Any help is welcome ;-)

  Hello

  You can order the recovery of the AEP CD in your country. But I guess that you will not be able to order in English. You can only buy the same recovery CD that came with the laptop and it was a French language.

  What you could do is to install the original CD of Microsoft English Windows and then install the drivers of Toshiba of the page.

• lvl4. DISP error message will appear, and Qosmio G30-201 stops

  Hello

  I have a Qosmio G30-201 and have had it for almost 2 years now.
  Only a few weeks back I get an error message * error nv4.disp* and my system shuts down.
  I used the recovery many times cd and it does not work for a day or 2

  Any 1 can help please?

  Thank you

  Hello

  Try first update the BIOS and the graphics card driver.
  If this doesn't help then I would recommend contacting the ASP in your country as suggested by Akuma too.

  Good luck