BSOD bug control

Similar Questions

• CVI 2013 Legacy Formatting options not saved at exit. (Bug control)

  Bug control: when I choose the legacy formatting options to change the styles of support and then save and close the program, the information is reset to default to reopening the project.

  CVI Version 13.0.0

  Hi blakney,.

  I actually filed a request for Corrective Action on this issue yesterday. What a coincidence! Good work it is. If you want to track the status of the correction, the identification number of the CAR is 449864.

  Thank you and my apologies if this caused you inconvenience.

• unknown bug control: 8th bugcheck

  original title: unknown bug control: 8th error checking. parameters = 0xc0000005, 0x82a82c64 0x88e7f328, 0 x 0 "_".

  I get this error unknown bug check: 8 error checking. parameters = 0xc0000005, 0x82a82c64 0x88e7f328, 0 x 0"in Windows 7. I upgraded a Dell Inspiron 1500 w / 1 GB internel and 105 GB drive hard w a Pentium DuoCore of XP to Windows 7. Update Advisor said that the video card would have problems to run Aero. I am not running Aero and whenever the cell breaks down, it's the same exact error. Is the video card? Is this an update? The computer is a system restore until we get the error again

  A value of 0x0000008E KERNEL_MODE_EXCEPTION_NOT_HANDLED bug control a. This bug check indicates that a kernel-mode application has generated an exception that the error handler did not.

  Please download the files to your ((copier les fichiers dmp tout d'abord sur votre bureau, sinon vous ne pouvez pas télécharger les) folder on your Skydrive Windows\Minidump dmp (Every LiveID (the email you use to login here on the forums) has a SkyDrive: http://skydrive.live.com/.)) Sign in with your LiveID and you can download 25 GB of data and share them with your friends. http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65)

  and post a link here, so that we can look at landfills.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Visual Studio 2013 installed on Windows 7 may cause bug control in the NTFS driver?

  Hello!

  I installed Visual Studio on Windows 7 2013. Shortly after started NTFS bug control regularly occur.

  VS install all drivers and can therefore be the cause of the bug check?

  Thank you

  Hello

  Thank you for the update on the issue.

  I appreciate your efforts to help us get the Event Viewer logs, but we will need files from mini dump for better analyze the question.

  I would ask allows you to check the Inbox of your email that we sent you a private message.

  Please return to the email with the required information. Also please let us know if you have not received a private message.

  Thank you

• Get BSOD under control of bug, I found the issue was csrss.exe. I uninstalled the video drivers intel, but the machine is still crushing.

  Hello

  I Keep getting this blue screen under bug death check I found that the issue was csrss.exe. I uninstalled the video drivers intel, but the machine is still crushing.

  https://onedrive.live.com/redir?RESID=BE2C45CEFD325C95! 162 & authkey =! AKZFqC6arezz-QI & ithint = the file % 2czip

  I join the crush dump files.

  Kindly help.

  First, you must upgrade to the Service Pack-1

  Service pack 1 update.
  
  http://Windows.Microsoft.com/installwindows7sp1

  Learn how to install Windows 7 Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1
  
  Additional resources:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-SP1
  http://Windows.Microsoft.com/troubleshootwindows7sp1

  After that, if you're still crashing

  These accidents were related to the corruption of memory (probably caused by Kaspersky).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.

  In other words STOP! If you don't know what it means that you're probably not  

  
  

  
  

  1-Driver Verifier (for full instructions, see our wiki here)

  
  2-Memtest. (You can learn more about running memtest here)

• [Bug] Controls created from primitives have the wrong default value

  I feel like the scene in South Park where MOM Kyles is in the Office of the Director and the Director asked "Hello, which seems to be"cheesing"you today?  Here's what's me cheesing today:

  When you create a control from a terminal to a primitive of the control's default value is not transmitted to the control is created as we are accustomed from subVIs.  Oh the label certainly will make you think that it is because it seems to be considered good style to write a small exhibition on the default inside the parentheses.

  For example, drop 'Get the tail' on a BD and a control of the size of the queue terminal max.  The control is created has value of-1 as you can imagine, and the label says "the maximum queue size (-1, the queue that is created in this case has an unlimited size.»  It seems as reasonable to do something)".  Okay, maybe my memory is not clear on the actual label, but something like that.  Now to the fact that the default value of the terminal is '-1' and the label contains (-1 blah blah blah), and the current value is '-1', you may suspect that the control's default value is '-1', but you'd be wrong.»»»  '0' is the default I32.

  This is not upward mostly because 1. most of the defaults tend to be default values by default (ie. false, 0, ") 2.  Usually, I first create constants and change the controls later that transfers by default.

  My recent encounter was in a VI that worked until I Inline it and then stopped working.  A man who was difficult to diagnose.  I thought WTF say you I can't create a queue of size 0, I have a control with a value '-1' sitting right here!  Finally, I realized that this feature fed to the default, then I tried "reset default" and to my surprise I saw the value of-1 to 0.  What? What? What?

  Darin.K,

  Thought you might like to know that I filed the request for Corrective Action - 441061 # in response to this post on the forum.  R & D is now aware of the issue.

• Frequent bug control 0 x 1 LeAPC_INDEX_MISMATCHErreur all audio playback

  This happens quite often during playback of any audio stream on the Internet. Generally, I use Google Chrome for my browsing needs. It's crash reporting feature does not send any information to Google.

  One day the system works very well and I can watch a few videos on YouTube or listen to a few songs on SoundCloud with no problems. The other day my first attempt to watch YouTube BSOD instant results.

  All the latest Windows Update patches and drivers from the manufacturer are installed on the system. I use Lenovo System Update once per month for these needs.

  Information System and the Small Memory Dump files (Link to OneDrive)

  Material: Lenovo ThinkPad T460s

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  2-Memtest. (You can learn more about running memtest here)

• Bug control: KERNEL_SECURITY_CHECK_FAILURE (139); Has no security check

  Recently, when I opened up two of my programs at the same time (OBS in stream) and TotalMedia Extreme to my capture card, my computer suddenly had to reboot and included a message on the lines "failed security check" and a few other messages. I would like to know how to avoid this problem in the future, as the laptop I was using was relatively new.

  Minidump: https://onedrive.live.com/?cid=8557ff9f3374b35c&id=8557FF9F3374B35C%21399

  Hello

  The attached file of the DMP is the verification of bug KERNEL_SECURITY_CHECK_FAILURE (139) .

  This bug check indicates that the kernel has detected a critical data structure corruption.

  Error checking 139, {3, ffffd00029f3c920, ffffd00029f3c878, 0}

  Argument 1 of the bug check is 3 which indicates that a LIST_ENTRY has been tampered. Code 3, LIST_ENTRY corruption.

  0: kd > k
  Call child-SP RetAddr site
  ffffd000 '29f3c5f8 fffff801' 73b68ae9 nt! KeBugCheckEx
  ffffd000 '29f3c600 fffff801' 73b68e10 nt! KiBugCheckDispatch + 0 x 69
  ffffd000 '29f3c740 fffff801' nt b 73, 68034! KiFastFailDispatch + 0xd0
  ffffd000 '29f3c920 fffff801' e900440d nt! KiRaiseSecurityCheckFailure + 0xf4
  ffffd000 '29f3cab0 fffff801' ebd17ce6 ks! CKsQueue::DeleteStreamPointer + 0x16dd
  ffffd000'29f3caf0 00000000 00000001' hcwhdpvr + 0x8ce6
  ffffd000 '29f3caf8 00000000' 00000000, 0 x 1

  hcwhdpvr.sys (Hauppauge HD PVR capture driver) damaged a critical data structure.

  0: kd > lmvm hcwhdpvr
  start end module name
  fffff801 'ebd0f000 fffff801' ebd3bd00 hcwhdpvr T (no symbol)
  Loaded symbol image file: hcwhdpvr.sys
  Image path: \SystemRoot\system32\DRIVERS\hcwhdpvr.sys
  Image name: hcwhdpvr.sys
  Timestamp: Wed Mar 07 10:03:30 2012

  Look for an update here - http://www.hauppauge.com/site/support/support.html

  ----------------------------

  0: kd > lmvm afc
  start end module name
  fffff801 'ea3af000 fffff801' ea3b8000 Afc (postponed)
  Image path: \SystemRoot\SysWOW64\drivers\Afc.sys
  Image name: Afc.sys
  Timestamp: Fri Jul 12 01:48:20 2006

  Driver ASPI Shell (CD/DVD program) ArcSoft (R) are really old, I would uninstall it since it is a fairly problematic/useless piece of software.

  Kind regards

  Patrick

• Exchange 2016 production critical bug control 2012 server crash on the server cluster server

  What happened 2 times, just a sudden failure, I have a memory dump but its too big for me to open. Help, please.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Exchange Server forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  See you soon.

• bug control alarm DSC?

  
  

  Hello

  For all concerned, there is a CAR for that to speed up the loading of VI: CAR # 333897. It was not implemented in LabVIEW 2012 well and the recommended solution is that described in item 3.

  Best regards

  Johan

• BSOD on win server 2008 r2 std PAGE_FAULT_IN_NO_PAGED_AREA bug check code 0 x 50

  Hi all, I have this problem:

  My server gets a BSOD evrytime I try to log in, I can only log in safe mode.

  I've seen so many pages saying that this error is caused by a hardware failure, but I have not intall anything new on this, I guess an update caused the problem, I already ran the unsuccessful memory test, also had executed tools hard disk without finding anything to help solve the problem I have also updated the BIOS without success, I also uninstalled the latest updates but the problem persists. Can someone help me?

  • Server: DELL PowerEdge 310
  • OS: Windows 2008 R2
  • bug control chain: PAGE_FAULT_IN_NONPAGED_AREA
  • bug check code: 0 x 00000050
  • caused by the address: ntoskrnl.exe + 73c00

  A problem has been detected and Windows has been shut down to avoid damage
  on your computer.

  The problem seems to be caused by the following file: ntoskrnl.exe

  PAGE_FAULT_IN_NONPAGED_AREA

  If this is the first time you've seen this stop error screen,
  Restart your computer. If this screen appears again, follow
  the following steps:

  Check to make sure any new hardware or software is installed correctly.
  If this is a new installation, ask your hardware manufacturer or software
  the Windows updates, you might need.

  If problems continue, disable or remove any newly installed hardware
  or software. Disable the BIOS memory options such as implementing caching or shading.
  If you need to use safe mode to remove or disable components, restart
  your computer, press F8 to select Advanced Startup Options and then
  select Safe Mode.

  Technical information:

  STOP: 0 X 00000050 (0XFFFFF8A0103AF000, 0 X 0000000000000000, 0XFFFFF8000235FDFF,)
  0 x 0000000000000000)

  Ntoskrnl.exe - address 0xfffff800020c9c00 base at 0xfffff80002056000 DateStamp
  0x5684191c

  Thank you very much for your help!

  Oscar

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot

  Aloha everyone,
  I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.
  The installation ended safely.  I then install my screen reader, Window-Eyes, requiring a reboot.  After the reboot, I started to install critical updates to Windows.  On my fourth update and restarting, I got the blue screen of death, that of some people call a BSoD.  I rebooted and Windows itself restored to a previous state of good, of my just accept the default choice.  Then the rear computer works, but if I stop, restart I get the blue screen of death (BSod) is back, and the loop begins again, i.e. windows restores good condition that works well, until you stop, but on reboot - BSoD is BACK!
  I removed the automatic update option, I disabled ScanDisk, drivers updated, bluetooth devices, deactivated sideshow, etc., without any positive result.  I called Microsoft for assisstance and the technician acted like this isn't a known issue, but he assured me that he could solve the problem.  He took control of my computer remotely and do not tell me anything except that the computer would check and repair any problem on reboot, and if he did does not resolve the problem, I have to remember.  The computer has rebooted without the BSod, but I stopped to check if the loop went, and it is not!  To restart the BSOd was back.  It is to note that if I put the computer to sleep, I get a clean start, but stop, restart or hibernation, I get the blue screen of death (BSoD)!
  It is a Dell Dimension XPS 420 with a intel Q6600 processer, 3 GB of ddr2 memory, which came with OS Vista Home premium 32-bit.  The Vista system, the last time I got a BSoD has been for more than a year.

  After researching this problem on Google, it appears that there is a problem without a solution.
  I ran "which has crashed, you can get:
  http://www.resplendence.com/downloads

  The following accident report:
  Monday, December 21, 2009 23:23:44 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA800573B060, 0xFFFFFA800573B340, 0xFFFFF80002D91240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\122109-16972-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 21, 2009 20:22:10 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122109-33306-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 20, 2009 15:28:42 crashed your computer
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002ADC00C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\122009-17565-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Thursday, December 17, 2009 12:27:45 AM your computer crashed
  This was probably caused by the following module:
  Ntoskrnl.exe
  Verification of error code: 0 x 50 (1, 0xFFFFF80002A9300C, 0xFFFFFFFFFFFFFFD0, 0 x 0 x 0)
  Error:
  PAGE_FAULT_IN_NONPAGED_AREA
  Empty the file: C:\Windows\Minidump\121609-28111-01.dmp
  file path: C:\Windows\system32\ntoskrnl.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: NT Kernel System &
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Monday, December 14, 2009 20:59:21 crashed your computer
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80059A3060, 0xFFFFFA80059A3340, 0xFFFFF80002DC4240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121409-25506-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Sunday, December 13, 2009 02:17:55 your computer crashed
  This was probably caused by the following module:
  Wininit.exe
  Bug check code: 0xF4 (0x3, 0xFFFFFA80058A4060, 0xFFFFFA80058A4340, 0xFFFFF80002D8A240)
  Error:
  CRITICAL_OBJECT_TERMINATION
  Empty the file: C:\Windows\Minidump\121209-24648-01.dmp
  file path: C:\Windows\system32\wininit.exe
  product:
  Microsoft® Windows® operating system
  company:
  Microsoft Corporation
  Description: Application to Windows startup
  The accident took place in a standard Microsoft module. Your system configuration can
  be incorrect, perhaps the culprit may be another driver on your system which cannot
  be identified at this time.
  Conclusion
  6 dumps were found and analysed. Note that it is not always possible to
  assert with certainty whether a reported driver is really responsible for crashing
  your system or that the cause is in another module. However, it is suggested
  looking for updates for the products that these drivers belong to and regularly
  Visit the Windows Update or activate the automatic updates for Windows. In the case of a piece of
  defective material is in trouble, a Google search on the bug control
  Errors, as well as the name of the model and brand of your computer can help you investigate
  This further.
  end of the crash report.
  A side comment:
  Them are 56 reported problems, and none of them have solutions. If I go through each problem report and check for solutions, about 80% of the times I ask myself to send to Microsoft for more information about the problem and I click on send, but I always get the following:
  [Window title]
  Incident reports

  [Main instruction]
  Problem connecting to the Windows error reporting service

  [Content]
  Some of the reports can not be uploaded to the Windows error reporting service. Please try again later.

  [Close] »
  I tried several times with the same result, that is, the details of the problem which has need of Microsoft is not be received.  To this end, the problem will not be found.
  Thanks much for any help.
  Manny
  P.S. I'll never upgrade a Windows operating system.  My recommendation for anyone who is planning to upgrade to Windows 7 is to try first on a dual boot using the free download.  If it works for you, consider yourself lucky and buy the upgrade.  If it does not, then remove Windows 7 and stay with your old system.

  Please check your RAM for errors (use memtest86 + to test). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Hello. I repeated the BSOD is since I've owned this computer. I'm tired of trial and error.

  Hello. I had repeated BSOD (Blue Screen of Death) since I've owned this computer.

  Product: HP TouchSmart 300-1017 PC Desktop

  Product # NY604AA-ABA; [Personal information]

  W7/64.

  "DRIVER_POWER_STATE_FAILURE.

  My last HP support ticket number is 805 154 7061.

  These BSOD occur only when the machine is in

  STANDBY or hibernation,

  NEVER when it is active. NEVER.

  I called support 5 - 6 times and spent hours trying to get the problem solved.

  They took control and made things such as the update of the BIOS, the DL updates, etc., but the problem persists. Then on a reminder 24 hours later, they ask if everything is OK.

  WELL, WHAT * IS * OK UNTIL THE NEXT BSOD.

  These efforts have NO analysis as to what could be the cause of the problem.

  I'm tired of trial and error approaches, involving mainly conjecture.

  I have right to more effort has been to resolve this problem.

  Information about the BSOD settings on the causes of the problem are listed below.

  The code is always "Stop 0x0000009F.» Track dump parameters:

  ==============================================

  Dump file
  050711-19000 - 01.dmp

  Time of the accident
  07/05/2011 09:47:02

  Bug control chain
  DRIVER_POWER_STATE_FAILURE

  Bug check code
  0x0000009F

  Parameter 1
  00000000'00000003

  Parameter 2
  fffffa80'05c0ca00

  Parameter 3
  fffff800'00ba2748

  Parameter 4
  fffffa80'04472180

  Caused by the driver
  Ntoskrnl.exe

  Caused by address
  Ntoskrnl.exe + 80640

  Description of the file
  NT kernel & system

  Name of the product
  Microsoft® Windows® operating system

  Company
  Microsoft Corporation

  Version of the file
  6.1.7601.17592 (win7sp1_gdr.110408 - 1631)

  Processor
  x 64

  Full path
  C:\Windows\minidump\050711-19000-01.dmp

  ==============================================

  This requires an ANALYST determine the CAUSE of this recurring problem.

  There may be a solution to the MS Support Article ID: 977186 - "error message when you try to resume a Windows 7-based or Windows Server 2008 R2 computer for.

  "hibernation:" Stop 0x0000009F "

  He said: "to resolve this problem immediately, contact Microsoft Customer Support Services to obtain the fix. For a complete list of the Support Services client Microsoft

  phone numbers and information on the costs involved, see the Microsoft Web site at the following address:
  http://support.Microsoft.com/contactus/?WS=support (http://support.microsoft.com/contactus/?ws=support).

  I think that MS wants to charge a person for download. But I think any charges should be covered by HP, under my support contract.

  I want a permanent solution so that I can keep from losing my job.

  Tom Jones, Burbank, CA

  Ox9F errors are pilot errors.   Often they are solved by updating the graphics driver, but it could be any driver.  Sometimes something wrong in the system can cause a problem to another driver - they can be very difficult to solve.

  I saw a document on the Microsoft Web site that may apply - I might try what it says and see if that makes a difference.   http://support.Microsoft.com/kb/982091

  Also - make sure that you have updated the graphics and TV tuner driver (and everything that needs to be updated) - there were a few difficulties for crashes and blue screens in some of them.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=da&sw_lang=&product=4007366#n142

  -DM (an employee of HP long)

• BSOD everytime I try to install updates on newly installed windows 7 64-bit on the computer newly built

  just built a computer a week 7 there and installed.  my computer currently has no installed updates.  whenever I try to install updates (one of them) I get the bsod and need to restore several times, computer works fine until I turn it off.

  the screen will change resolution 1280 x 1024 at ~ 600 x 800 for about five seconds then bluescreen when it spoil.
  my initial error code: 100007e.
  0000005,4843518, 3c3c628, 3c3be80.  any help will be greatly appreciated.

  Hello

  Drivers of suspects, including video, BIOS, drivers ChipSet at low altitude, antivirus and anitspyware/safety programs
  and hardware issues including such as bad sitting cards, memory problems and wiring. Power supply
  is a real possibility. Are the updates of Windows he chokes on driver updates - if so right click on
  These and HIDE?

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  1000007E and 0000007E are the same

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0 x 80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
  • 0 x 80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERTION was met when no kernel debugger was attached to the system.
  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in the directory Inc. of the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Ensure that any new hardware that is installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the service by starting the computer by using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  =====================================================

  This solving generic problems but it should help you resolve the issue however remember them ALL
  This new material is very suspicious.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Acer Predator G6-710 BSOD works well after the connection, but...

  Hi I'm new to the forum.  My question is that if someone else got some error checking to restart error and if so, how to solve it.  I'll share the info I get from Whocrashed from the dmp files.  I am running windows 10.

  ------------------------------------------------------------------------------------------------------------------------------------------------------------------- Crash dump directory: C:\WINDOWS\Minidump

  Dumps are enabled on your computer.

  Tuesday, October 4, 2016 05:25:53 GMT crashed your computer
  crash dump file: C:\WINDOWS\Minidump\100416-3984-01.dmp
  This was probably caused by the following module: iccwdt.sys (ICCWDT + 0 x 7838)
  Bugcheck code: 0xD1 (0xFFFFF80746167838, 0xFFFFF80746167838, 0x2, 0 x 8)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\WINDOWS\system32\drivers\iccwdt.sys
  product: driver Intel® Watchdog Timer (Intel (r) WDT)
  company: Intel Corporation
  Description: driver Intel® Watchdog Timer (Intel (r) WDT)
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: iccwdt.sys (driver Intel® Watchdog Timer (Intel (r) WDT), Intel Corporation).
  Google search: Intel Corporation DRIVER_IRQL_NOT_LESS_OR_EQUAL

  I can't connect to my desktop and everything works normally.  But when I leave my computer alone, if I run a game or not, and no one touches, it displays a blue screen with the error above.  Does anyone have a solution?

  OK, but a week later the same problem occurred.  This time I retried the search google for anything whatsoever.  I managed to find the message with a driver who has a problem of "overclocking".  I went to the Acer website and went to the drivers.  I thought I had them all, but I missed the chipset driver.  Now, I got the BSOD when I updated and since then, I have not had a crash.  I hope that this help anyone having the same problem.  And thank you to everyone who has helped too.