BSOD drives when adding T110 ii with PERC H200 and SBS 2011 or Server 2008 R2-

Similar Questions

• No driver LAN detected on the Satellite Pro U400 and Tecra A10 Win Server 2008

  Hello

  We use in our coupany a Windows Server deployment with Windows Server 2008 boot.wim to the installation of our computers.

  I have ad driver marvell netwok our Boot.wim, but after starting the network, I have an error message because the network adapter does not work.

  We install workstations HP, VMware servers with it without problem, but we can't to install computers of latest toshia!

  We have 10 to 15 computers to install a week and we need to use this tool.

  I try to ad Intelshipset utility drivers without success.

  We have this problem with all models of just sitting Pro U400 PSU45E 10 years!

  Is there any other driver to install?
  ANYTHINK to set up?

  Best regards

  Hello

  As far as I know, Toshiba offers a few drivers are included in the recovery image and it is unclear to me that there are different drivers LAN for the specific model of laptop.
  All these drivers are available if someone wants to install a clean version of the operating system and do not want to use the factory settings.

  Have you created your own ghost image to SP U400 with all the necessary applications for the company's employees?

• When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

  MMC.exe APPCRASH

  When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

  Problem event name: APPCRASH

  Application name: mmc.exe

  Application version: 6.0.6001.18000

  Application timestamp: 47918d 09

  Fault Module name: KseAdm.dll

  Fault Module Version: 6.0.1262.1064

  Timestamp of Module error: 49426cbb

  Exception code: c0000005

  Exception offset: 0004 849 d

  OS version: 6.0.6001.2.1.0.272.7

  Locale ID: 1033

  Additional information 1: fd00

  More information 2: ea6f5fe8924aaa756324d57f87834160

  Additional information 3: fd00

  Additional information 4: ea6f5fe8924aaa756324d57f87834160

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Driver problem: Windows Server 2008 R2 on server T110 II with PERC S300 (RAID10)

  I have the Dell PowerEdge T110 II server with PERC S300 RAID card.  I installed 4 hard drives & them set on RAID10 in initial configuration.  The card mother recognizes the PCI-E card, which in turn recognizes readers.

  I pop in the Windows Server 2008 R2 DVD and I start from DVD, but when I get to the part where I have to choose a file location, it appears that he is not a player available.  There is another option to add a driver.  Then I went on the site ( http://tinyurl.com/PercS300driver) downloaded appropriate driver, added to USB & when I get to this screen, I'm trying to add the driver.  However, he said "there is no signed in this folder drivers."

  Does anyone know what I might be missing?

  You are using the wrong driver.  The one you linked to says it's for Server 2008 x 86.  As 2008 R2 64-bit only, there is no way it will work.  Use this driver for 2008 R2 (you must change the drop down menu on site driver downloads / to the correct operating system):

  www.dell.com/.../DriverDetails

  Be sure to run first to extract it, and then put the contents extracted on your CD/DVD/USB for use with the link to load a driver.

• T110-II w / Perc H200, using consumer SSD RAID1

  We just took in a T110-II with controller Perc H200 RAID addon

  We want to use it as follows:

  2 x SAS k 10 600 GB HDD RAID 1 (DATA)

  2 x SATA SSD 120 GB RAID 1 (START of the OS)

  Now the SAS 10 k in car I am able to create the RAID 1 volume, but when I try to create the SSD RAID 1 volume he always tells me that there is a problem writing in non-volatile memory.  The menu of the controller goes on a 'lag' super slow mode.  Requires a reboot, but then it get stuck at the 'screen of boot... '. ».  The only way to return to the menu of Perc H200 is to unplug all SSD.

  The SSD that I use ARE consumer Kingston KC300 level I also bought from Dell.

  What I am doing wrong?

  EDIT: SORRY POSTED IN THE WRONG FORUM. MOD PLEASE MOVE TO CORRECT FORUM

  mbze430

  Question 1: where is a HCL for the H200, it I have a reference on the next command.

  http://Accessories.us.Dell.com/SNA/genselector.aspx?c=us&CS=04&l=en&manufact=694&s=BSD&sType=7&DGC=IR&CID=274098&lid=5124587&family=PowerEdge%20Servers

  This is not a complete list. You must call spare parts if the drive you are looking for is not available online.

  mbze430

  Question 2: The firmware to start for the H200 said that it is 7.15.xxxx is that correct?  Cause, I'm looking at the technical support from Dell and the version number of the firmware is much smaller.

  What is listed as the firmware version in the newspapers during the process of our PERCs controller initialization and controller is generally not what we call the version of the firmware. He is usually listed as the version of the package by the controller.

  Thank you

• Windows 7 does not recognize my 3 Seagate external drives but is very good with Western Digital and other sticks USB Flash. Windows Vista will see them.

  My apologies if this is a query repeatedly, but I can't find a job anywhere and he leads me into the wall.

  I have 3 external Seagate hard drives. All 3 range from about 3 years 11 months old, 1 TB - 3 TB of capacity, and I use them all from time to time to back up my media. In the past months, my Dell XPS ceased to recognize them, 95% of the time. Sometimes they will be Plug and Play and be fine, but otherwise the result when I plug them is coming the power light and the whirring disc fortunately but nothing on the laptop. They recognized themselves on my other machines running Vista. All other Flash memory devices are very good.

  I also have a hard drive Western Digital external powered, almost identical, that Plug and play every time.

  I tried all my ports and various cables and adapters. I tried them on other machines and they are very good, it seems to be just with my Dell and the Seagates. It recognizes everything that I plug in there from the iPhone to Flash Drives. It has all the latest drivers and Windows updates.

  When they're not working, they do not appear in the devices, disk management, Explorer or UVCView Manager. When they do, all settings appear to be well. My laptop runs Windows 7 Edition Home Premium with Service Pack 1.

  I assigned each their own letter drive, disabled power management and they are not protected by Word. The drivers are the standard Windows ones, because these devices do not use their own. I have the latest chipset drivers, everything works perfectly and is completely up to date.

  When I run UVCView (when one of them does not work), it is said there is an error autour MaxPacketSize, current externally is set to 9 and it said "ERROR: low peripheral speed require bMaxPacketSize0 = 8" branded error. I don't know if this is a factor? This may explain why it's slower transfer data to my machine that has USB3.0 it does on another machine, it begins at 130 MB/s and falls to 30 in 10 seconds.

  I tried all combinations of power off.

  I activated the network detection.

  I uninstalled all the USB in the Device Manager and reinstalled after the start.

  All 3 discs work instantly in my older Vista laptop runing.

  I am a loss to understand. I'm pulling my hair out and I don't have a lot to lose these days! There must be a setting in my computer or on the Seagates but I checked all the usual places and some of the more irritable areas.

  Thank you in advance.

  I'm surprised that the removal of the INFCACHE did not work.  Readers (all external references in fact) were cut at the time, right?  With a reboot after and before you plug anything back?
   
  These instructions really come down to:
   
  Unplug all USB devices other than the keyboard and mouse
  Open C:\Windows\System32\DriverStore
  INFCACHE.1 and rename it INFCACHE.old
  Restart the computer
  Reconnect it (one at a time) each USB device - giving the system about 30 seconds per device to 'catch up '.
   
  If you got on the rest as well your system files are good to go.

• Erasing a hard drive WELL on a machine with Windows 7 and 8

  OK, I have two laptops, I'll sell, a HP Pavilion g7 with Windows 7 and a 2000 HP with Windows 8. I want to make sure that no personal info is left on them. I used the function "reset" on the Windows 8 machine and I used on the Windows 7 machine recovery disks. Some of what I saw online, that should be enough, but others say I should also use Windows Eraser, or something like that, make sure that no programs recovery software can recover all the data (if the person I have to sell is be a techie).

  ... And some say just to use the computer strongly without putting any personal information on this subject and it will make all previous data unrecoverable thereon, but does not say how strongly or for how long to use a computer to ensure that all personnel in this regard is unrecoverable.

  So what is the answer? I don't have the recovery disc for the computer of Windows 8, I guess that I had to get a part or do some before using a hard drive eraser.

  Thank you

  Qathe2013

  Hi Qathe2013,

  Let me first answer your last question: in most cases, yes you will need your recovery disc or you will end up with a computer without an operating system.  However most manufacturers, including HP, put another partition on the hard disk with a file recovery: what you need to reinstall the operating system.  Depending on how it is configured, this additional partition on the hard drive may or may not appear when you browse your files and folders in Solution Explorer, then you might need to make sure that the manual.

  As to the "use the computer heavily and no info cannot be recovered", it's just about the fact that computers are still using re-use of space available disk and overwrite the old regions on the disk.  After a few re-writes the original data cannot be recovered using costly and sophisticated same restoration processes.  But you have no way of knowing if your real personal data was really erased.

  I will say that for most, just format the disk is enough.  I might personally feel safe with that I don't have - or even just using the function to reset the PC in Windows 8.  However, this does mean that a sufficiently motivated person were able to restore the bits of information I have.  So a program that replaces empty space on the disk with random data (sometimes referred to as "zero-ing" the disc) would put you at ease.

  I would also say long you can get your hands on the recovery CD (or make sure that the recovery partition exists), you can go ahead and clean the drive, reinstalled Windows itself and sell the PC.

• When adding new record create id data and the static information

  Hi, I have a tabe datbase like this:

  CREATE TABLE 'paper')
  'id_paper' INTEGER (11) NOT NULL AUTO_INCREMENT,
  'sample_url' varchar (50) COLLATE utf8_general_ci NOT NULL DEFAULT ",
  PRIMARY KEY ('id_paper')

  
  When I add the new record, I need the "sample_url" field to automatically add this information:

  images/15_sample.jpg.

  images - is subfolder where my pictures are stored
  15. is id_paper (primary news NuméroAuto ID)
  _sample.jpg - static and must be added.

  I use adobedeveloper Toolbox to generate code with minor changes, I'm no guru php either.

  I retrieve my data like this:

  SELECT
  Paper.ID_PAPER,
  Paper.sample_url,
  Concat ("< img src = images /', sample_url, ' ' ' width ="66"height ="174"/ >") AS sample
  Of
  paper

  I use this code to add fields:

  Add columns
  $ins_paper-> setTable ("paper");
  $ins_paper-> addColumn ("sample_url", "STRING_TYPE", "POST", "sample_url");
  $ins_paper-> setPrimaryKey ("id_paper", "NUMERIC_TYPE");

  It's php for the text box:

  < b >
  < class td = "KT_th" > < label for = "sample_url" > sample_url: < / label > < table >
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  <? PHP echo $tNGs-> displayFieldHint ("sample_url");? > <? PHP echo $tNGs-> displayFieldError ("paper", "sample_url");? > < table >
  < /tr >

  
  What should I change?

  I think in this line here:
  < td > < input type = "text" name = "sample_url" id = "sample_url" value = "<?" PHP echo KT_escapeAttribute ($row_rspaper ['sample_url']); ">" size = "32" / >
  I need to add php code to get the primary key ID and my static text too, but how?

  Hello

  Well the modified code is irrelevent at this stage. The custom trigger should do the trick. Test on my test server here it worked fine. So, something is missing. I was even going to the point of adding nothing to the sample_url field and he was always fill the db.

  It's my registerTriggers

  $ins_paper-> registerTrigger ('STARTER', "Trigger_Default_Starter", 1, "POST", "KT_Insert1");
  $ins_paper-> registerTrigger ("FRONT", "Trigger_Default_FormValidation", 10, $masterValidation);
  $ins_paper-> registerTrigger ("END", "Trigger_Default_Redirect", 99, "paper.php? done");
  $ins_paper-> registerTrigger ("AFTER", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("ERROR", "Trigger_LinkTransactions", 98);
  $ins_paper-> registerTrigger ("AFTER", "Trigger_Custom", 50);

  Maybe you can post a txt file with the uninstall code?

  I really think at this point it's something small.

• R210 with PERC H200 will increase the possibilities for HD

  I have a PE R210 w/PERC H200.  The RAID configuration is RAID 1 2 HD.  I was looking at options to increase the storage capacity.  Someone please correct me if I'm wrong, but I read that it is not possible to extend the VFD by improving each hd one at a time to rebuild the RAID VD, then its extension to occupy unused space in HD.  There is no other HD slots available on the R210, along with options to do I have if I want to keep the current VD but increase the storage space on the server?

  Backup, replace the disks with the biggest, configure RAID, restore from a backup.

• Compatibility issues with gwbasic and SBS 2011.

  I currently have SBS 2003 and upgrade to SBS 2011 and a new 64-bit server.  I'm running a gwbasic program and want to know if there will be problems on my workstations.  I don't think I'll be able to run the program locally on the new server.  We had a few speed issues for most in multiuser situations.   The problem seemed to have much worse at a time I made a few changes at the same time.  Multiple e-mail accounts to Exchange, Setup of email accommodation, added a Windows 7 machine, past all the other workstations to XP Pro (4) and did my back based gwbasic program update software.

  Hello

  I suggest you send the question in the TechNet forums and check if it helps:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/

  It will be useful.

• Adding more than 4 GB of RAM to a VM Server 2008 32-bit

  Hi, can you tell me if it is possible for a Server 2008 Standard 32-bit VM for more than 4 GB of RAM? I activated the EAP, but it made no difference. Is there something specific that needs to be done as is a virtual machine?

  This is a Limitation of Windows

  Even with active EAP 4 GB maximum on 32 bits, see insert from the link:

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx #physical_memory_limits_windows_server_2008

  

  Please allow points to useful/correct answers

• With the help of Back-End SQL Server 2008

  I intend to launch a project with JDeveloper 11 g R2 as front end and SQL Server 2008 as primary server.
  ADF does support SQL Server 2008 as a backend?

  According to the http://www.oracle.com/technetwork/developer-tools/jdev/index-091111.html#Databases, yes SQL Server 2008 is supported.

  additional for configuration, these links should help –ADF with SQL Server

  Published by: detrilles on June 11, 2012 Sudipto 16:09

• Start the UCM 11 g and IBR on Windows Server 2008 when you start the server

  Hello
  
  I installed ucm 11g with an inbound refinery on a 64-bit windows server 2008. The AAU and the bovine infectious rhinotraecheitis are supposed to start automatically after the server is running.
  
  1. I put the startWeblogic.cmd and the startNodeManager.cmd in the directory Autostartup. The weblogic and the nodemanager are starting very well in a denial of service console.
  2. I tried to start the University Complutense of Madrid with the following startManagedWeblogic of the UCM_Server1 command. Then he asks me a username and password and then, he throws a java exception and the UCM_Server1 will not be started.
  
  The current situation is that the weblogic and nodemanager starts automatically and the UCM_Server1 and IBR_Server1 must be started manually.
  
  What is the usual way to start the AAU automatically? Can we establish some Windows Services?
  
  Greetings
  Brahim

  The best way is probably a Windows Service. Here's the Oracle documentation on how to do it.
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/server_start/WinService.html

  You can also try the Windows Task Scheduler. I heard that this works well (even if a Windows Service would be better).
  http://www.windowsnetworking.com/articles_tutorials/working-Windows-Server-2008-Task-Scheduler-part1.html

  This post shows how to store your WebLogic login information encrypted on the disk.
  http://corecontentonly.com/2010/07/27/start-WebLogic-managed-server-without-username-and-password/

  Jonathan
  http://www.corecontentonly.com

• Query took too much time when adding new column to the table and the index set on this

  I added a new column to the table that contains thousands of records. and created the composite index with three columns (those newly added + two existing column)

  for the specifics. TBL table there are two columns col1, col2

  I added the new column col3 to TBL and created composit index (col1, col2, col3).

  Now for all the records in col3 is NULL. When I choose on this table, it takes too long...

  Any idea what my I do bad., I have check the query plan, it is using the index

  It is solved using collection of statistics using the

  DBMS_STATS. GATHER_TABLE_STATS

  @Top.Gun thanks for your review...

• Table filters break when using of text with the words "AND" or "OR".

  With the help of JDev 11.1.1.3.0
  
  Hello-
  
  The filters in the table seem to treat the words 'and' and 'or' differently when they are used in the filters in the table. Is it possible to change this behavior? I have a few sets of data where these words appear in the data. When the user performs a search on the data and uses the words 'and' or 'or' the filter no longer works. (He returned lines nil or returns all the rows.)
  
  Test case:
  
  1 create a filterable unalterable for the resources table. DEPARTMENTS table.
  2 set the Department name column to be case insensitive in its filtering:

                <af:column sortProperty="DepartmentName" filterable="true"
                           sortable="true"
                           headerText="#{bindings.DepartmentsView1.hints.DepartmentName.label}"
                           id="c2" filterFeatures="caseInsensitive">
                  <af:outputText value="#{row.DepartmentName}" id="ot4"/>
                </af:column>

  3. run the page.
  4. in my HR. Data REPRESENTATION, there is a service with the name "control and credit." In the service name filter, type
  a. 'control' and press ENTER - service of "control and credit" only comes
  (b) "control and" and press ENTER - only 'control and credit' Department appears
  c. 'control and credit' and press ENTER - ZERO departments appear.
  
  5. the Test cases for "GOLD". In the service name filter, type
  a. 'or' and press ENTER - displays all departments.
  
  
  I tried a few other words SQL in the filters but only 'AND' and 'GOLD' seems to break things.
  Is this a known bug?
  Is there a solution?
  
  Thank you for reading my question

  The list of documents http://docs.oracle.com/cd/E21764_01/web.1111/b31974/web_search_bc.htm#BABCCBCF 'AND' and 'GOLD' as 'Operators of Query-by-Example search criteria' are not text but the operators.
  You can try to join the text in the filter with single or double quotes and see, is that it treads in the form of text.

  Timo