-
Unable to connect to the internet after the removal of system tool virus
A computer running Windows XP Media Center Edition Version 2002, Service Pack 3 has got a virus System Tool which I believe I deleted using the key of activation and then run Malwarebytes' Anti-Malware. On reboot, the system tool icon was still in the system tray, so I ran Norton 360 to remove unwanted registry files. He got rid of the icon in the system tray. I also then removed the Malwarebytes software. Please note that, while I was removing the virus, I was able to connect to AOL so that in mode safe mode with networking. Finally, who has stopped working. The Malwarebytes software has been downloaded on the infected computer with a flash drive from a computer with working internet.
I cannot now connect to the internet with Internet Explorer 8 or AOL (under standard or secure modes). When you are trying to connect with IE8, the message reads 'Internet Explorer cannot display the web page' and when I run the diagnostic tests, it indicates there is a problem with the modem and/or router. These devices are, however, both the work that there are other computers connected to them and they work.
I tried Microsoft solutions are answers to a similar question. Unfortunately, none of them worked in my situation. They have been in accordance with the following:
No doubt...
What happens when you try to connect to the Internet?
What is your version of XP, the version of Service Pack and IE?
What method did you relieve your system of affection 'Antivir Solution Pro' (how confident you are that you got rid of him)?
Generally, any part of this procedure is necessary after removing Antivir Solution Pro (a well documented removal procedure would have included the steps to cancel Internet connectivity issues). I would get my infected system and try the procedure you used to see how it works.
If, when you try to connect with Internet Explorer, you see something like:
Internet Explorer cannot display this webpage
The most likely causes:
You are not connected to the Internet.
The Web site encounters problems.
There could be a typing error in the address.
We will check your network connection properties.
Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your Internet disabled in certain situations.
Click Start, run and enter in the box:
Inetcpl.cpl
Click OK to start the network settings of Internet control panel applet properties, connections.
Or, in Internet Explorer click on tools, Options, connections, LAN settings.
These settings control your Internet access for all browsers.
On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.
Automatically detect the setting checked =
Use the automatic configuration script = unchecked
Use a proxy server for your LAN = not checked
Make changes, then click OK, OK to save the settings.
Check your settings for how your network adapter gets its IP and DNS settings. On most home systems, these parameters must be defined for the system will get the settings automatically.
If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.
Click Start, settings, Control Panel, network connections, and then select your current network connection.
On the general tab, click Properties.
In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.
In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically. Select the following two options:
Obtain an IP address automatically
Get a DNS server address automatically
The rest of the options on the screen should then be grayed out/not available.
Make changes, then click OK, OK to save the settings.
Restart your computer and test your connection.
Perform scans for malware, and then fix any problems:
Download, install, update and do a full scan with these free malware detection programs:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
They can be uninstalled later if you wish.
Also, I typed cmd in the start run box and the command-line entered ipconfig enough and ipconfig/renew. This is also not rectify the situation.
For your assistance, the following is a copy of a part of the file that I thought that may be applicable after that I typed in miscinfo32 in start, run box:
Summary of the system:
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
System FIELD name
System manufacturer Dell Inc.
Dimension of the model 8400 system
System Type X 86-based PC
Processor x 86 Family 15 Model 4 Stepping 3 GenuineIntel ~ 2992 Mhz
A04 BIOS Version/Date Dell Inc., 10/01/2005
SMBIOS Version 2.3
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
CHAMP\steve user name
Eastern Daylight Time zone
Total physical memory 1 024,00 MB
Available physical memory 534,65 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Swap file space 2.40 GB
Paging file C:\pagefile.sys
Network card:
Name [00000001] Broadcom NetXtreme 57xx Gigabit Controller
Adapter Type Ethernet 802.3
Product Type Broadcom NetXtreme 57xx Gigabit Controller
Installed Yes
ID of device PNP PCI\VEN_14E4 & DEV_1677 & SUBSYS_01771028 & REV_01\4 & 1D7EFF9E & 0 & 00E0
Last reset 23/03/2011 14:51
Index 1
B57w2k service name
IP 192.168.1.102
IP 255.255.255.0 subnet
Gateway IP 192.168.1.1
Active Yes DHCP
192.168.1.1 DHCP server
DHCP lease expires on 2011-03-24 15:22
DHCP lease obtained 23/03/2011-15:22
MAC address 00:11:11:CB:96:8 D
0xDCFF0000-0xDCFFFFFF memory address
IRQ channel, IRQ 16
Driver c:\windows\system32\drivers\b57xp32.sys (7.73.0.0 built by: WinDDK, 181,75 KB (186 112 bytes), 1980-01-01 01:00)
Name [00000002] RAS Async adapter
Card type not available
Card product Type RAS Async
Installed Yes
PNP ID of device not available
Last reset 23/03/2011 14:51
Index 2
Service name AsyncMac
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Name [00000003] Packet Scheduler Miniport
Adapter Type Ethernet 802.3
Product Type Packet Scheduler Miniport
Installed Yes
ROOT\MS_PSCHEDMP\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 3
Name of the service
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 00:11:11:CB:96:8 D
Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
Name [00000004] Wan WAN (L2TP) Miniport
Card type not available
Product type Wan (L2TP) WAN Miniport
Installed Yes
ROOT\MS_L2TPMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 4
Service name Rasl2tp
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\rasl2tp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 50,13 KB (51 328 bytes), 10/08/2004-07:00)
Name [00000005] Wan WAN (PPTP) Miniport
Adapter Type wide area network (WAN)
Product type Miniport Wan WAN (PPTP)
Installed Yes
ROOT\MS_PPTPMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 5
Service name PptpMiniport
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 50:50:54:50:30:30
Driver c:\windows\system32\drivers\raspptp.sys (5.1.2600.5512 (xpsp.080413 - 0852), 47.25 KB (48 384 bytes), 10/08/2004-07:00)
Name [00000006] WAN (PPPOE) Miniport
Adapter Type wide area network (WAN)
Product type WAN (PPPOE) Miniport
Installed Yes
ROOT\MS_PPPOEMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 6
Service name RasPppoe
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 33:50:6F:45:30:30
Driver c:\windows\system32\drivers\raspppoe.sys (5.1.2600.5512 (xpsp.080413 - 0852), 40,50 KB (41 472 bytes), 10/08/2004-07:00)
Name [00000007] Direct parallel
Card type not available
Product Type Direct parallel
Installed Yes
ROOT\MS_PTIMINIPORT\0000 PNP device ID
Last reset 23/03/2011 14:51
Index 7
Service name Raspti
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\raspti.sys (5.1.2600.0 (xpclient.010817 - 1148), 16,13 KB (16 512 bytes), 10/08/2004-07:00)
Name [00000008] Wan (IP) Miniport
Card type not available
Type of product (IP) WAN Miniport
Installed Yes
ROOT\MS_NDISWANIP\0000 PNP device ID
Last reset 23/03/2011 14:51
8 index
Service name NdisWan
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address is not available
Driver c:\windows\system32\drivers\ndiswan.sys (5.1.2600.5512 (xpsp.080413 - 0852), 89,38 KB (91 520 bytes), 10/08/2004-07:00)
Name [00000009] Packet Scheduler Miniport
Adapter Type Ethernet 802.3
Product Type Packet Scheduler Miniport
Installed Yes
ROOT\MS_PSCHEDMP\0001 PNP device ID
Last reset 23/03/2011 14:51
Index 9
Name of the service
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
16:4 MAC address: 20:52:41:53
Driver c:\windows\system32\drivers\psched.sys (5.1.2600.5512 (xpsp.080413 - 0852), 67,50 KB (69 120 bytes), 10/08/2004-07:00)
Network adapter 1394 name [00000010]
Adapter Type Ethernet 802.3
Product Type 1394 network adapter
Installed Yes
V1394\NIC1394\9103858423C01 PNP device ID
Last reset 23/03/2011 14:51
Index 10
Service name NIC1394
IP address not available
IP subnet not available
Default IP gateway not available
Active Yes DHCP
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 52:df:35:27:59:E5
Pilot c:\windows\system32\drivers\nic1394.sys (5.1.2600.5512 (xpsp.080413 - 0852), 60,38 KB (61 824 bytes), 10/08/2004-07:00)
Name [00000011] Miniport Wan WAN (ATW)
Adapter Type wide area network (WAN)
Product type Miniport Wan WAN (ATW)
Installed Yes
ROOT\NET\0000 PNP device ID
Last reset 23/03/2011 14:51
11 index
WANATW service name
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
00:03: 8A: 00:00:15 of MAC address
Driver c:\windows\system32\drivers\wanatw4.sys (8.3.0.0, 32,80 KB (33 588 bytes), 2005-02-23 22:12)
Name [00000012] Symantec Network Security Miniport
Adapter Type Ethernet 802.3
Type of product Symantec Network Security Miniport
Installed Yes
ROOT\SYMC_SYMIMMP\0000 PNP device ID
Last reset 23/03/2011 14:51
12 index
Service name SymIMMP
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
MAC address 00:11:11:CB:96:8 D
Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
Name [00000013] Symantec Network Security Miniport
Adapter Type Ethernet 802.3
Type of product Symantec Network Security Miniport
Installed Yes
ROOT\SYMC_SYMIMMP\0001 PNP device ID
Last reset 23/03/2011 14:51
13 index
Service name SymIMMP
IP address not available
IP subnet not available
Default IP gateway not available
DHCP active No.
DHCP server not available
DHCP lease expires not available
DHCP lease obtained is not available
16:4 MAC address: 20:52:41:53
Driver c:\windows\system32\drivers\symim.sys (9.2.0.37, 35.55 KB (36 400 bytes), 2009-07-28 23:21)
Network Protocol:
Name MSAFD Tcpip [TCP/IP]
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 16 bytes
Message size maximum 0 bytes
Message Oriented No.
Minimum address size 16 bytes
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports shipped data Yes
Supports graceful closing Yes
Supports guaranteed bandwidth Yes
Supports multicast No.
Name MSAFD Tcpip [UDP/IP]
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 16 bytes
63,93 Message size maximum KB (65 467 bytes)
Message Oriented Yes
Minimum address size 16 bytes
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast Yes
Name RSVP UDP Service provider
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 16 bytes
63,93 Message size maximum KB (65 467 bytes)
Message Oriented Yes
Minimum address size 16 bytes
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption Yes
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast Yes
Name RSVP TCP Service provider
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 16 bytes
Message size maximum 0 bytes
Message Oriented No.
Minimum address size 16 bytes
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption Yes
Supports shipped data Yes
Supports graceful closing Yes
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] SEQPACKET NetBIOS name 3
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{86DE67BB-124C-4039-9E0A-6E34D8ED163A}] DATAGRAM 3 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2}] SEQPACKET NetBIOS name 0
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{FDBF57E6-2C39-4D5C-90D7-D29559CA61B2]} 0 DATAGRAM NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] SEQPACKET NetBIOS name 1
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{9E8A814B-6996-4336-9096-A51FC25DDFFD}] DATAGRAM 1 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2}] SEQPACKET NetBIOS name 2
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{39725903-652B-46ED-A34D-F03FCA3F2EA2]} 2 DATAGRAM NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] SEQPACKET NetBIOS name 4
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{4CF6D63E-0CE2-43D2-A604-E0B5AE500F96}] DATAGRAM 4 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] SEQPACKET NetBIOS name 5
Service numbers without connection
Guarantees delivery Yes
Yes guarantees sequencing
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Supports broadcasting no.
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
MSAFD [\Device\NetBT_Tcpip_{037081C0-F24A-4CCD-AF1B-D5A478C0A28F}] DATAGRAM 5 NetBIOS name
Connectionless service Yes
Guaranteed delivery no.
Guarantees sequencing No.
Maximum address size 20 bytes
Maximum Message size 62.50 KB (64 000 bytes)
Message Oriented Yes
Bytes of address size 20 minimums
Pseudo stream oriented No.
Media broadcasting Yes
Supports Connect Data No.
Supports disconnect Data No.
Supports encryption no.
Supports data dispatched No.
Supports graceful closing No.
Supports guaranteed bandwidth Yes
Supports multicast No.
WinSock network:
File c:\windows\system32\winsock.dll
Size of 2.80 KB (2 864 bytes)
Version 3.10
File c:\windows\system32\wsock32.dll
Size 22,00 KB (22 528 bytes)
Version 5.1.2600.5512 (xpsp.080413 - 0852)
Summary of Internet Explorer:
Version 8.0.6001.18702
Build 86001
Ask the path C:\Program may Explorer
English (United States)
Active printer Dell AIO Printer A920, winspool, Ne04:
Level of 128-bit encryption
Disabled Access Manager
IEAK install not
Internet Explorer Versions of files:
Actxprxy.dll 6.0.2900.5512 96 KB 2008-04-13 20:11:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Advpack.dll 8.0.6001.18702 126KO 08/03/2009 04:32:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Asctrls.ocx 6.0.2900.5512 112KO 2008-04-13 20:08:58 C:\WINDOWS\SYSTEM32 Microsoft Corporation
browselc.dll 6.0.2900.5512 62KO 2008-04-13 13:03:24 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Browseui.dll 6.0.2900.5512 KB 1 001 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
cdfview.dll 6.0.2900.5512 148 KB 2008-04-13 20:11:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Comctl32.dll 5.82.2900.6028 603 KB 2010-08-23 12:12:04 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Dxtrans.dll 8.0.6001.18702 211KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Dxtmsft.dll 8.0.6001.18702 340KO 08/03/2009 04:31:44 C:\WINDOWS\SYSTEM32 Microsoft Corporation
iecont.dll not available not available not available not available
iecontlc.dll not available not available not available not available
Iedkcs32.dll 18.0.6001.18968 379 KB 10/09/2010 01:58:03 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Iepeers.dll 8.0.6001.18968 180KO 09-10-2010 01:58:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Iesetup.dll 8.0.6001.18702 70 KB 08/03/2009 04:32:50 C:\WINDOWS\SYSTEM32 Microsoft Corporation
ieuinit.inf not available 56 KB 2009-06-29 04:40:16 unavailable C:\WINDOWS\SYSTEM32
Iexplore.exe 8.0.6001.18702 624KO 08/03/2009 14:09:26 C:\Program may Explorer Microsoft Corporation
imgutil.dll 8.0.6001.18702 34KO 08/03/2009 04:31:38 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inetcpl.cpl 8.0.6001.18968 1 435 KB 10/09/2010 01:58:06 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inetcplc.dll 6.0.2600.0 108KO 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Inseng.dll 8.0.6001.18702 93KO 08/03/2009 04:32:46 C:\WINDOWS\SYSTEM32 Microsoft Corporation
MLang.dll 6.0.2900.5512 573 KB 2008-04-13 20:11:57 C:\WINDOWS\SYSTEM32 Microsoft Corporation
MSENCODE.dll 2000.7.25.0 KB 92 10/08/2004 07:00 not available C:\WINDOWS\SYSTEM32
Mshta.exe 8.0.6001.18702 45KO 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtml.dll 8.0.6001.18975 5 818 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtml.tlb 8.0.6001.18702 1 601 KB 08/03/2009 04:31:02 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Mshtmled.dll 8.0.6001.18972 65KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
mshtmler.dll 8.0.6001.18702 47KO 08/03/2009 04:31:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Msident.dll 6.0.2900.5512 51KO 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Msidntld.dll 6.0.2600.0 15 KB 10/08/2004 07:00 C:\WINDOWS\SYSTEM32 Microsoft Corporation
msieftp.dll 6.0.2900.5512 243 KB 2008-04-13 20:11:59 C:\WINDOWS\SYSTEM32 Microsoft Corporation
msrating.dll 8.0.6001.18702 189KO 08/03/2009 04:34:18 C:\WINDOWS\SYSTEM32 Microsoft Corporation
mstime.dll 8.0.6001.18968 598KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Occache.dll 8.0.6001.18968 202KO 09-10-2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
proctexe.ocx 6.3.2900.5512 80 KB 2008-04-13 20:10:35 C:\WINDOWS\SYSTEM32 Intel Corporation
sendmail.dll 6.0.2900.5512 54 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shdoclc.dll 6.0.2900.5512 537KO 2008-04-13 13:03:19 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shdocvw.dll 6.0.2900.5512 1 464 KB 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shfolder.dll 6.0.2900.5512 25KO 2008-04-13 20:12:05 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Shlwapi.dll 6.0.2900.5912 463ko 08/12/2009 05:23:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
TDC.ocx 8.0.6001.18702 65KO 08/03/2009 04:30:56 C:\WINDOWS\SYSTEM32 Microsoft Corporation
URL.dll 8.0.6001.18702 104KO 08/03/2009 04:34:28 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Urlmon.dll 8.0.6001.18968 1 183 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Webcheck.dll 8.0.6001.18702 231KO 08/03/2009 04:34:48 C:\WINDOWS\SYSTEM32 Microsoft Corporation
WinInet.dll 8.0.6001.18968 895 KB 10/09/2010 01:58:08 C:\WINDOWS\SYSTEM32 Microsoft Corporation
Internet Explorer connectivity:
Dial connection preference never
LAN settings
AutoConfigProxy wininet.dll
AutoProxyDetectMode disabled
AutoConfigURL
Proxy disabled
ProxyServer
ProxyOverride
America Online
AutoProxyDetectMode disabled
AutoConfigURL
Proxy disabled
ProxyServer
ProxyOverride
Internet programs to use connection not available
Maximum attempts 10
Waiting between retries 5 sec
Disconnect idle 20 min time
Autodisconnect disabled
Modem Intel(r) 537EP V9x DF PCI Modem
Remote access PPP server
Connect to the network
Enable Software Compression Yes
Would require no encrypted password
Require no data encryption
TCP/IP network protocols
Use server assigned IP address Yes
The 0.0.0.0 IP address
Use server assigned NameServer Yes
Primary addresses DNS name server: 0.0.0.0
Secondary DNS: 0.0.0.0
Primary WINS: 0.0.0.0
Secondary WINS: 0.0.0.0
Use the Compression header IP Yes
Use the default gateway Yes
Name of the script file
You have any ideas that could help me find an internet connection? Thanks for any help.
The removal of the virus seems to have taken some required system files. See if the System File Checker helps. Click Start > run and enter in the field open.
sfc/scannow
Press ENTER. The System File Checker must detect the missing necessary files and put back them. If this does not work, use a system restore point from before you were infected. If this does not work, get out of your XP installation diskettes.
-
Utility profile WLAN does not start after the removal of some tools from Toshiba
Here, I would like to say that Toshiba software (utilities, entering in laptops) is poor, unstable and mostly useless. I think it makes sense to launch a call to management of Toshiba to stop dealing us with the ugly such software.
SHAME ON THEM!
For example: in my new Toshiba laptop utility of LAN/WLAN profile (the program is useful only) did not work. It has not removed after uninstalling some of the Toshiba Utilities, their menu program shortcuts forms and I can also see their icons to the left in the notification area settings.
In addition, some of the utilities did not start (like Toshiba disc Creator). Also utility Toshiba are very different, poorly described and localized, do not appear in between them and their shortcuts are entwined in the menu of programs with shortcuts to documentation.
Hey Buddy,
To be honest I don t understand why people post only the negative side of utilities Toshiba pre-installed you also noticed that they make your (computer) life easier?
I don t want to count each tool of Toshiba, but they provide useful functions like CD burning, material is diagnosed, assistant LAN/WLAN connection and so far.
If you don't like it, n no one said that should be used. Uninstall it and be happy with your laptop. :)
Regarding your problem:
I put t know why don t tool work harder because you don't l t post the exact name of it, and that the tools you deleted but say you ConfigFree? The program is useful for WLAN/LAN connections then try to reinstall Toshiba page.
-
JAR: Changes made to the file packaged AP Project_1007.ini require restarting services by BDUS to enter into force?
Hello
I have a small doubt regarding the changes made on the packaged AP Project_1007.ini AP Imaging project file.
I have a supplier search button in my auditor and I must make a few changes to the application of it. This provider search query is defined in section search provider OFR the AP packaged Project_1007.ini file.
I added my additional condition in the where clause of the query to extract from sellers. But when I check in the WebVerifier, I don't see reflected.
So in general, any changes made to packaged AP Project_1007.ini requires a restart of the services/auditor of WFR etc. of have reflected them?
Let me know if I am not clear with my question.
Kind regards
Srikanth R
Usually just stop and start the console RTS toured, but sometimes you need to restart the icons green funnel management service. A script is maintained in the project, no not the ini file, you must make sure that you save the project after adding or editing a script in designer of as it warns you not save changes
-
How to see changes made to the file in Oracle EBS on browser
Hello
When I change any file such as Javascript or Base.htm or all the files on the EBS server and it does not reflect on browser until then I restart the server of the EBS. After restarting the server, it reflects the browser but the EBS server restart is not so easy. It takes more time to restart.
If anyone knows another way to see the changes made to the file on the browser, then please reply to this post.
Thank you very much
Othmane
Othmane,
Take a look at the link below. It answers your question.
http://www.appsdba.info/docs/oracle_apps/R12/HowToUpdateJavaCodeClass.PDF
See also:
Welcome to my Blogspot Oracle: Bounce Apache Server - Oracle Apps R12
See you soon
AJ
-
Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub»
Whenever I plug my iPhone into a USB port on my Toshiba laptop, I get a message «overload the hub» I tried to reset the ports using the Device Manager, but it does not work. Can someone help me solve this problem?
This means that the phone ends so much power that the ports are closed to avoid damage to your laptop. Get a USB hub powered (the one that plugs into your computer and comes with an adapter to plug into the wall) to provide more power, or less plug items on your USB ports at the same time.
-
How to merge the changes made to the same analysis?
Hello
I have an analysis and there are two issues raised against it, in a real environment.
In development, the problems starts at the same time. However, only the first resolution should be tested. Assuming that the first problem is solved, how can I "apply" the changes made to the second issue fixed / fixed?
What are the means and best practices in this situation? OBIEE version is 11.1.1.7.0.
Thank you.
Kind regards
Maury.
You can use a text editor such as Notepad ++ and the plugin in comparison to compare the XML from the analyses and differences in merger. That would be the fastest easy/more...
Just a word of warning - this is completely not supported by Oracle and can VERY easily lead to a corrupted analysis. You'll find plenty of OBIEE'ers experienced out there who have hacked the XML on analysis, but you have also messed up in the process. Always make sure you have a backup and Don ' t cry about it if it breaks.
To the OP - I don't think that there is a good answer to this problem. The analyses are simple objects, there is no option of merger for them.
-
Tracking of changes made by the customer?
Is there a way to track the changes made by the receiver/writer on some fields in a form? I need some fields to be open to both the sender and the signatory, but need a way to indicate if one of these fields have been modified by the signatory prior to approval.
Anyone know of a way to do this?
Thank you all.
Red Hello,
By default, a field can be assigned to anyone as well but if it's full of any beneficiary, then it becomes read-only and cannot be modified by the other beneficiaries involved in the transaction.
Kind regards
-Usman
-
Why Adobe Muse is stuck while trying to merge changes made in the browser edition?
My client contacted me this morning to let me know that one of his pages on its website was down and that it is urgent that it gets fixed. I immediately tried to open the Muse to merge the changes and re - upload the files. I did not work. Muse is stuck in the fusion of customer changes made in the browser edition. So, I called Adobe and have just spent two hours on the phone with a representative of Adobe Muse trying to solve the problem. It reaches point merger/day 2/3 of the files then crashes. The representative asked me to update to Muse that I did and again tried to merge the changes, and it did not work. Then, the representative asked me to change the Preferences of Muse folder in the library of 'old' then I was instructed to uninstall Muse and re - install on my computer. I did it. It still does not. Then the representative asked me to create a new user on my computer. What? Which makes no sense at all. When I asked to speak to the level 3 technical support, I was told that no one was available, but that she would have a supervisor call me back in a few minutes. I'm still waiting for a callback.
For my client's site is not down, I decided with the permission of my client to not merge the changes she made and simply re - download the file I recorded previously.
Can you get it someone please let me know how to solve the problem with ability to Muse to merge updates so that the next time this happens, I'm not wasting two hours on the phone and still not return the right answer or a call from Adobe? Gets a little frustrated by the lack of product support. Thank you.
Hello Andrea,
First of all, I apologize for bad support experience you had. I forwarded this thread on the support Manager to take a look.
It sounds like you hit a bug we have heard reports of the but have not yet isolated, when merging text. There are probably setting a text which, when trying to merge, plant Muse. Until fix us the bug, the best work around is to find this block of text (usually by clicking on merge on each change until it crashes in the Muse, sorry), restart Muse and then jump merger than one change. Afterwords, re-do the changes as part of this text by hand. I know this isn't a great work autour, but it should at least get you operational return.
Best,
Sam
-
I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you
I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you
Hi Julie
You can check the minimum specifications here:system requirements | Cloud Creative
Kind regards
Guinot
-
Changes made to the database
Hi friends,
How to find changes made to the last the two level database and the physical object? (without going for logminer or audit). Please suggest me.
Thank you
KSG As... How findout what are the procedures/tables/views (added /deleted/ modified), tablespace/data files (added/removed) to a particular database the previous day? *(without Going for Analysing LogMiner, or Auditing) *. Please suggest other is possible to find it?
procedures/tables/views (added modified /deleted/) - ONLY by views
have a look at http://vsbabu.org/oracle/sect06.html
or
Select * from dba_objects where LAST_DDL_TIME > SYSDATE - 7;
to add/remove data files, check the file path of the controlfile
Thank you
-
How to get changes made to the TLF text
Hello
Is there a way to TLF to get the number of changes made to the TLF text? Like if I applied underscore of a text or changed the font size, etc.
Can I get these changes made to the text?
As whenever I do an operation, can I keep the operation whenever an operation is complete.
UndoManager can undo changes through the EditManager, but not the changes directly to the TextFlow. Similarly, we do operations and send messages of operation for the things happening across the EditManager. I would say that if you want to remove the terminal node, you can remove it by getting his range of text and remove it through the EditManager. Then, the change would be infeasible. Try something like this:
editManager.deleteText (new SelectionState (textFlow, leaf.getAbsoluteStart (), leaf.getAbsoluteStart () + leaf.textLength));
-robin
-
changes made to the code do not appear in the file swf, even trace instructions not.
I just picked up a clients flex project and I can't get the app to reflect even a simple statement trace.
Before that I took over, the project was built last successfully with the environment/sdk Flash Builder Beta 2. I have the latest version of Flash Builder 4.
To import the project into FB4, I get a ton of errors. Most of them, mainly because of changes made to the beta2 sdk for free.
Some of the things that I fixed:
-mx to library://ns.adobe.com/flex/mx library://ns.adobe.com/flex/halo namespace
-player video count: many names of the State for the video player component had been changed, more correctly States had been added. There are also other related component video and property names that needed to be updated.
But I have corrected this and the application is finally able to compile (but with a few caveats the type of variable in double especially)
The only thing is now that any change I make to the project is not reflected in the build (debug or release). I have changed the existing traces, added additional traces. Nothing is displayed. I even removed the applicationComplete property in the main.mxml. Still, everything worked as nothing has changed.
Also I can't debug the application. Whenever I try to debug... Flash builder said... "Swf application contains no debug information required...". "
Anyone has any idea how to even begin to tackle this? Any help or pointers would be greatly appreciated.
Hello
Have you tried to project-> 'clean' the project?
Also, instead of wasting more time with the import, I try and create a new project in FB 4 and copy all the code sorce and assets in the new project. Flex 2 has been a long time ago.
Mike
-
Difficulty of internet connection after Security Tool Virus
My mothers computer caught the security tool virus. I finally had to reload Windows XP and Windows XP now works, but I can't connect wirelessly to the internet. She got ahead through Linksys. When I look under the modem it says connection cable to cable. I'm assuming I erased the other information that I need to connect on the internet. Any help will be appreciated.
Here are some ideas of the fallout that occurs in your Internet settings after some infections have been deleted and how set things straight.
Depending on how you removed the infection (the removal procedure is well documented), sometimes there are a few other things to do later.
Some malware knows that you will try to get in the Internet to try to find a hair removal method if it adjusts things on your system to prevent you to do so. Even if you delete the malware using several analytical tools, tools cannot tell if the Internet settings have been modified by malicious software or put you that on purpose so he leaves the only parameters (and your system cannot connect).
The malware hope that you will not be able to understand these things and give up and just reinstall your XP, do an install repair or by using a Restore Point. Sometimes it breaks these things too, but you can usually remedy without the use of one of these methds (which aren't really patches at all)...
If you have reinstalled XP, this may not apply to your situation, but it would be a good start:
We will check your network connection properties.
Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.
Click Start, run and enter in the box:
Inetcpl.cpl
Click OK to launch the Internet Properties Control Panel, choose connections, LAN settings.
Or, in Internet Explorer click on tools, Options, connections, LAN settings.
These settings control your Internet access for all browsers.
On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.
Automatically detect the setting checked =
Use the automatic configuration script = unchecked
Use a proxy server for your LAN = not checked
Make changes, then click OK, OK to save the settings.
Check your settings for how your network adapter gets its IP and DNS settings. On most home systems, these parameters must be defined for the system will get the settings automatically.
If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.
Click Start, settings, Control Panel, network connections, and then select your current network connection.
On the general tab, click Properties.
In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.
In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically. Select the following two options:
Obtain an IP address automatically
Get a DNS server address automatically
The rest of the options on the screen should then be grayed out/not available.
Make changes, then click OK, OK to save the settings.
Restart your computer and test your connection.
If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.
Click Start, run and enter in the box:
cmd
Click OK to open a command prompt window, and then type the following commands:
ipconfig/release
ipconfig / renew
output
Restart your computer and test your connection.
If this does not work, follow these steps:
Please provide additional information on your system:
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
Click Start, run and enter in the box:
Msinfo32
Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
This will minimize back Q & A and eliminate guesswork.
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
I'm running a full scan of the system with my anti-virus software and it filled almost my laptop crashes, problem with the vga865.fon file
I'm running a full scan of the system with my anti-virus software and it filled almost my laptop breaks down when it comes to: -.
c:\windows\winsxs\x86_microsoft-Windows-font-bitmap-oem_31bf3856ad364e35_6.0.6000.16386_none_fb2d5aefb17b8d65\vga865.FON
This file can be replaced. When I scan this folder individually its fine, please help
Thank you
Hello
What protection software antivirus you are running on the computer?
Method 1: Check if you can run the scan in safe mode without in all questions
Follow the steps mentioned in the link below to access the secure mode
Startup options (including safe mode)
Method 2:
you can run Safe Mode security monitor, see the steps in the article below
How to install the free Windows Live OneCare Safety Scanner and then scan your computer in Mode safe
Method 3: Follow the steps mentioned in the link below to check your hard disk for errors, and then check if the problem is resolved
Check your hard drive for errors
If the problem persists,
Method 4: Long file name could cause this problem, perform a backup of the file (copy it somewhere else), and then rename the file, check to see if that makes a difference
Note: Copy the file to the original location.
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.