buffering overflow of FIFO County edge even at very low rates

Similar Questions

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• My volume is still very low... even at 100%. How can I change this?

  the volume on my PC, even at 100% is very low...

  No easy solution as you give few details on the specs of your PC/laptop.

  I would start by download and then install the latest drivers for your audio device on PC/Laptop manufacturers website.

  Otherwise, the re-post giving PC/Laptop deails such as follows:

  * brand/name

  * Model number/reference number

  If it's a PC, you have made yourself, and you have a soundcard PCI, state the brand and model number.

  See you soon,.

  Jerry

• My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

  I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• New project: each item - even the very first clip - must be made.  Why?  I don't have any applied effects.

  I just started a new project.  Each clip - even the first WITHOUT effects - must be made.  Why?  I used this same exact clip in other videos and had no problem.  I tried other simple clips (no effect), and they all do the same thing.  Would that be something in my initial project settings? It's a funeral, and I have NO time to wait until Sunday when Adobe help cat opens again.  Help, please!

  If each element should render your sequence settings do not match you clips.

  Go into the settings of sequence and change everything that you are doing well match the clips.

  What version are you on?

  Post a screendump of sequence settings and properties of a clip.

  Or do this:

  

  Copy everything from the old when in this new sequence.

• Fan always on with new Satellite A100-153, even on the low-energy setting

  Hello
  I just got a new A100. Its processor is a Centrino Duo.
  I am very surprised by the general noise of the machine. I had a front M30 including fan rarely provided on but on this new machine, the fan stops.
  I changed the power settings (proc low speed + low cooling method) but that doesn't change anything.
  The CPU is only 2 or 3% and I am working not all heavy duty applications, so this should not happen.

  What is your experience with the series A100 and the Centrino Dual Core in general?

  Is that what I can do to fix this problem or am I condemned to hear this stupid fan 24/7?

  Hello

  It is not easy to say why the fans run constantly.
  This problem occurs on new recovered BONES?
  In addition check you the version of the BIOS. If the most recent BIOS is available on the Web from Toshiba page so try to update. But I'm not 100% sure if it will solve the problem of fan.

• Aspire V 15 Nitro sound very low even when the value to 100%. Does anyone have a solution?

  Dear community,

  I tried clicking on the sound icon.

  By selecting "playback devices".

  Clicking Tealtek High Definition Audio, and then click Properties.

  In "Improvements" all I have is a box unchecked to "disable sound effects everything" and nothing else. so, I can't find anything to change.

  When audio is playing on the icon settings sound is 100%, but the green bar is only part of the lower part of the bar.

  The sound was working fine last week. I don't know what I may have accidentally made.

  I would like suggestions or ideas.

  Thanks D.

  Dear IronFly,

  Thanks for all your suggestions. I just found out what caused the problem. A recent update for the onboard sound of Acer apparently gave it priority over Nvidia. To give priority to Nvidia and then by restarting the computer, its a was restored in all its splendour. If all goes well, this solution can help people who have lucky on a similar problem.

• Printer HP 6500 E709n - impression is very low, even after the new cartridges installed

  New cartridges installed correctly, and there is no error message. But now, the impression is almost unreadable it's so light. What is the problem?

  I understand that you are having problems print quality with low impressions.  I've included a useful document that might solve your problem.

  Let me know if it helps.

• Player 11 locks up for a single user, but the other user on the PC 'EVEN' works very well!

  Hello Adobe and group. I tried all of the recommended patches that I can find. Windows 7 Home Premium perfectly up-to-date. Uninstall/reinstall adobe, accept the eula, remove the hard drive and run anti-virus/malware/spyware/kasperskyrootkit programs on my test PC. No solution. VERY strange that one user can be logged on to the PC and the drive works fine weather the other user is logged in or not. Another user opens 11 reader and it crashes instantly and permanently until the end of the task by the Manager tasks.

  Of all my reading, it looks like a recurring problem. Is there a real solution for this? Please share if so!

  Try Acrobat/Reader software cleaner then re - install:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

• Sound distortion speaker on my Qosmio F20

  Since I bought my Qosmio F20 a few year ago, I knew a distortion by the internal speakers, even in very low volume. I even sent the laptop back a few weeks after I bought it because I thought that they were defective. Despite Toshiba replacement (or who claim to replace) the speakers, there is no difference. What I am doing wrong? I tried to disable graphic equalizer that helps but does not eliminate the problem. I think it's more to do with the frequency of the sound volume level.

  It seems strange that a laptop designed for multimedia such a fundamental flaw.

  > It seems strange that a laptop designed for multimedia such a fundamental flaw.
  To be honest, I can't imagine something like that. I've worked long with Qosmio G20. OK, it is a larger but very similar to your Qosmio F20 small model. I can say that the sound was perfect.

  For me, it is not easy to understand what you mean with sound distortion. Is there some sort of interruption or what? This happens to you a time when sound comes through the speakers (start = towards the top of his, CD music, DVD movies, mp3, internet radio)?

  Did you notice HARD drive activity when this happens?

• Can not on the button while loop

  Hi all... hoping to get a few design tips as I am very, very new to LabVIEW. I got a project that someone else had started and I've encountered a problem that I don't know how to solve.

  I'm using LabVIEW version 8.0.1 and I think my problem has to do with the help of DAQmx in a while loop. In "Working.vi" (including the Sub - VI 'Temp data to CSV.vi'), I copied - and stuck the while loop in a vacuum VI for testing. In this VI, with nothing else, it works - slowly, but it works.

  In the real VI, I can see the data of temperature updated every 4 seconds, so I know that the program is not frozen or something like that. However, by pressing the button "Return to main Menu" does nothing - the image of the button does not show that it is to be depressed, regardless of how many times you click or click and hold the button. I've attached a screenshot of the while loop inside the real VI; I prefer not to fix the real VI (especially because it contains references to many of the Subvi, and it is not currently contained within a LAW degree).

  I'm this coding the wrong way? I have the feeling that it might be caused by my settings DAQmx (continuous samples, 2 samples to read, 250 mHz). The very low rate would be the cause? Is there a better way to have readings of temperature taken every 4 seconds (approximately)?

  You have your case of event the value "lock the front panel" until full?  If so, then no other presses the button will be recognized until the ongoing case event complete.

  It is never a good idea to have a code in an event business that takes a long time to run.  It will make your UI seems to lag or even functional.  Any time I see someone with a while loop inside a case of the event, I'm afraid.  (By the way, I am also concerned all nodes comments hovering over the structure of your event?  What are doing?  Why some operate on the default data?)

  In general, events should take is no longer running then what ordinary person could be expected until they feel like the user interface is delayed.  Perhaps at the top of 1-2 seconds.  You should look at a model of design of producer/consumer with events.  The structure of your event should respond to UI events, then pass orders by a queue path to the part of your program that does the real work.

• HP pavilion laptop g7 volume too low, how should I do?

  We bought a new laptop with windows 7... Err may 8, is a Pavilion g7-2269wm.  Our problem is that even with the volumes and the equalizer value max settings there is a very low volume to be heard.  There is a Visual on the volume control bars that shows even the very low volumes that underlie the high volume settings.  Ive searched several routs in the machine to fix it without success, but I'm not a computer scientist.  Any suggestions?

  Hello

  One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers & headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

  Kind regards

  DP - K

• Videos of frost and thaw

  Hello - during playback of videos stored on the 64G, weapons of mass destruction through my ipad 2, videos freeze, thaw, freeze on and on. Tried to take a break until the vid file entirely not loaded, no joy. Tried to change my wireless connection directly on the disc, no joy. Any advice?

  What is the transmission speed of the videos you want to listen to? Put buffer during the course of water usually indicates a bitrate than weapons of mass destruction cannot be spread quite quickly. If the throughput is greater than 10 Mb/s, it will play without buffering. You can convert the videos to a lower rate if that is the case.

• Windows 7 drivers for AGP GeForce4 MX 4000

  Hello!

  I have an old PC years on this PC I have GeForce4 MX 4000 (AGP), I tried with the mode of compatibility, but after that my computer crash so have BSD when I check the file dump with WINDbg, I found vga drivers to make problem, when I remove and install the default VGA drivers I have no problem with that , but when I install the games even with very low system req. I can't run.

  Currently I can't buy a component or a new PC so I im stuck on this Conference. :

  AMD Sempron 2500 +.

  1 GB DDR1 mem.

  HDD1 ATA IBM-LTAD 307030 30 GB

  HDD2 MAXTOR 4D040H2 ATA 40 GB

  Sound: Realtek AC97

  VGA: AGPx8 GeForce4 MX 4000

  Can you help me and give me a link for a rider like drivers which is taken in charge for windows 7, but the other GeForce VGA which have same chip-set or something that can help me, please!

  This is obviously a very old computer.  It is unlikely that you will find a driver better than standard VGA.  It is an achievement that you have managed to load Win7 on this computer, but you'll have to be content because this isn't a gaming PC.  What you should expect to use it for is occasional navigation in the web and e-mail.

  If you could find an AGP video card that comes with the Win7 drivers, it would be useful to resolve the video issue.  However, finding one is very questionable.   AND after that, you will have to increase to at least 2 GB memory and probably can is no longer the memory you need.  And I don't even talking about these discs hard teeny.

• Master slide background of sizing in projects of nature responsive

  Hello

  New to Captivate 9 and despite hours searching I can't resolve these issues with a responsive project:

  -J' inserted a background image (16:9) for the master slide, but it leaves spaces upstairs and downstairs. What size or proportion should be the background image?

  -L' background image includes a logo which is piled up in the mobile portrait and portrait of tablet - y at - it another way to prevent distortion of logo?

  Appreciate help or the pearls of wisdom.

  Graeme

  For your first question: it depends on the resolution, you chose for the project in primary mode: If this is a ratio of 4:3, make sure you change the image to this ratio. Best practice is to give exactly the size (width and height in pixels) which is necessary for the primary display. You can edit images in Captivate (also cropping).

  Regarding the logo: it would be better to insert separately as an image. Don't forget to set the width to a % and the height to Auto (Position properties), which will keep the fixed width/height ratio. For logos, you could also choose for a fixed size in the views of breakpoint, or give a minimum size to keep visible even in very low browser resolutions.