Bug in the conditional for loop with an array empty

There seems to be a bug in the loop with a conditional terminal.

If an empty array is connected to an indexed table auto entry tunnel, a tunnel of output array has an element instead of zero.

The constant matrix is left empty.

High loop without the conditional Terminal produces an empty array.

Conditional down with a terminal loop never true generates an array containing a single element

Thanks to LabVIEW version 8.5


Tags: NI Software

Similar Questions

  • Have different conditions for loop start and stop

    I do a VI when a circle is moving on an image control and its movement is decided by programming, but also by the user. I have programmed the speed of the circle as a vector which turns (using a rotation matrix) when a certain condition is met. This condition is dependent on the position of the circle and direction as well as other entries. The tricky thing is I want to that when the rotation condition is met (true), the rotation continues until the angle of the vector is equal to the original angle (when the condition became real) + / variable x.

    So my question is how do I program a piece of code that once activated, will run until a stop (depending on the State of vector early in the race) condition is reached. As it should be when the VI is on, I can not put a while loop inside an another while loop. Online help mentions also conditional for loops, but it isn't available in my version of LV (8.2)

    The correct solution is a state machine with a case inside a single while loop structure. Based on the need to use one of the several cases and move on to another matter as necessary using a state variable (for example, an enum) in a registry change. One of the cases should be slowed down and not do much except maybe controls survey.

    There are a lot of models.

    Do not hesitate to contact a simplified example of your code and help you.

  • When to use the cursor for loop and the cursor (open, fetch, close)

    Hello world
    I have a small doubt about when to use the cursor for loop and when to use the cursor for loop and the cursor (open, fetch, close).
    Well, I'm not the difference between implicit and explicit cursor. So please tell me how I got to know, what to use and when?




    Kind regards
    BS2012

    Published by: BS2012 on January 29, 2013 12:15

    All SQLs are analyzed, stored and executed as cursors. Thus, you will always use a cursor.

    The problem is that languages, such as PL/SQL, provide different interfaces to interact with the SQL cursor. As the ref, the slider interface, the interface DBMS_SQL slider interface and so on.

    Each of these interfaces offers different features. For example, using the interface DBMS_SQL allows binding dynamics and dynamic recovery. The Ref Cursor interface allows your code PL/SQL pass a handle to a reference pointing to the SQL cursor, to an external client. Etc.

    The fundamental reason for the use of an explicit cursor interface is mainly that you own and manage bulk made extraction output provided by PL/SQL cursor.

    With a cursor FOR , the motor loop of PL/SQL optimize the loop by extracting block a 100 lines both. However, you cannot access this collection in bulk directly inside the loop.

    With an explicit cursor interface, you specify the size of the extraction in bulk via the clause LIMIT , and you set the variable of collection to use. This allows you to use the collection directly variable inside the loop.

    However, the need to do - code manually in bulk collection - rarely occur in the daily programs in PL/SQL. A line of treatment is both slow and not well fits. And even if your bulk code collects lines, these lines must still be processed one at a time in your code. It is much more efficient and scalable rather write SQL code, and make the engine SQL the line of treatment for you.

  • Can I use the photos for plastic surgery? What are the conditions for medical use? How can I chat with someone?

    I need photo stock for communication online for a society of plastic surgery. Use the faces and the recognizable body parts?

    What are the conditions? What plan I have in case I can use photos?

    I would really like to chat with someone from Adobe, but I couldn't find the option.

    Thank you!

    ... AND you can find it too https://helpx.adobe.com/stock/faq.html > Common Questions, Adobe Stock > Stock of Adobe for companies

    If necessary and for other issues, click on the http://helpx.adobe.com/contact.html 'until you get to 'cat'. If it is 'open' (ago opening hours) Please use it, I personally had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

    Hans-Günter

  • For loops with the cursor line and indexing

    Hi all

    I have a question about the loops with the cursor, line and indexing.

    How can I scan via a cursor with an iterator?

    I would use an iterator as

    Whole LoopIndex;
    Whole LoopIndex2;

    for LoopIndex at the beginning of the cursor at the end of the cursor
    loop
    line =: cursor [LoopIndex];
    for LoopIndex2 of LoopIndex at the end of the cursor
    etc...
    end loop;

    I need to use an iterator because I need to use a nested for loop.



    OR


    How can I solve the following problem?

    Class name % ofClass average test Score
    1 Niobe 7 8 8.4
    1 alena 4 7 7.5
    1 9 7 8.9 Estia
    1 Lilly 10 8 9.8
    1 Sandra 6 8 8.3
    1 Melanie 8 8 8.1
    Nadia 2 8 3 4.4
    Sayuki 2 9 8 8.4
    Diasy 2 7 8 8.0
    Flower 2 7 8 6.5
    Diana 2 6 8 7.3
    3 Flora 7 8 5.8
    Sukiya 3 4 8 8.4
    Samantha 3 10 8 7.7
    Roxanne 3 7 8 6.9
    Eline 3 8 8 7.4

    I need to
    -By class, I need to recalculate each average people
    -By class, I need to calculate the % of class score (sum averages / people in the class)

    So it can be done in a nested for loop?
    Or do I just step by step?

    Well, based on this information it would be something like...

    SQL> ed
    Wrote file afiedt.buf
    
      1  with t as (select 1 as Class, 'Niobe' as Nm, 7 as Score, 8 as Tests, 8.4 as Average from dual union all
      2             select 1, 'Alena', 4, 7, 7.5 from dual union all
      3             select 1, 'Estia', 9, 7, 8.9 from dual union all
      4             select 1, 'Lilly', 10, 8, 9.8 from dual union all
      5             select 1, 'Sandra', 6, 8, 8.3 from dual union all
      6             select 1, 'Melanie', 8, 8, 8.1 from dual union all
      7             select 2, 'Nadia', 3, 8, 4.4 from dual union all
      8             select 2, 'Sayuki', 9, 8, 8.4 from dual union all
      9             select 2, 'Diasy', 7, 8, 8.0 from dual union all
     10             select 2, 'Blossom', 7, 8, 6.5 from dual union all
     11             select 2, 'Diana', 6, 8, 7.3 from dual union all
     12             select 3, 'Flora', 7, 8, 5.8 from dual union all
     13             select 3, 'Sukiya', 4, 8, 8.4 from dual union all
     14             select 3, 'Samantha', 10, 8, 7.7 from dual union all
     15             select 3, 'Roxanne', 7, 8, 6.9 from dual union all
     16             select 3, 'Eline', 8, 8, 7.4 from dual)
     17  --
     18  -- END OF TEST DATA
     19  --
     20  select class, nm as "NAME", score, tests, average
     21        ,round(((average*tests)+score)/(tests+1),1) as avg_person
     22        ,round((average / sum(average) over (partition by class))*100,1) as class_average
     23  from t
     24* order by class, nm
    SQL> /
    
         CLASS NAME          SCORE      TESTS    AVERAGE AVG_PERSON CLASS_AVERAGE
    ---------- -------- ---------- ---------- ---------- ---------- -------------
             1 Alena             4          7        7.5        7.1          14.7
             1 Estia             9          7        8.9        8.9          17.5
             1 Lilly            10          8        9.8        9.8          19.2
             1 Melanie           8          8        8.1        8.1          15.9
             1 Niobe             7          8        8.4        8.2          16.5
             1 Sandra            6          8        8.3          8          16.3
             2 Blossom           7          8        6.5        6.6          18.8
             2 Diana             6          8        7.3        7.2          21.1
             2 Diasy             7          8          8        7.9          23.1
             2 Nadia             3          8        4.4        4.2          12.7
             2 Sayuki            9          8        8.4        8.5          24.3
             3 Eline             8          8        7.4        7.5          20.4
             3 Flora             7          8        5.8        5.9            16
             3 Roxanne           7          8        6.9        6.9          19.1
             3 Samantha         10          8        7.7          8          21.3
             3 Sukiya            4          8        8.4        7.9          23.2
    
    16 rows selected.
    
  • For loops with the array variable

    I am using a loop for example with the name of the table in the select variable, but get a compilation error

    for current_aud_row in (select * from ' | table_name |' where...)


    table_name contains the name of the actual table

    I do that I get the name of the table as a parameter.
    Help, please!

    Excellent. Oracle APEX (Application Express) is a web IDE and RTS - it makes heavy use of DBMS_SQL to execute SQLs and restore these dynamically in the form of Web-based reports, or turn it into XML for graphical rendering using Flash software.

    DBMS_SQL is perhaps more complex (and only really necessary when it comes true dynamic SQL at all stages - including the result of SQL), but we must know how to use and apply. It is a valuable tool at times.

  • timestamp as conditions for loops

    Hi, I'm new to LabVIEW. I'm looking for help with my vi, which has some time a loop for waveforms (currently of a simulator) written in a text file. I want to run the conditional loop according to timestamps. I have the timestamp for the start time and the end time and the current time on my front and I wish for my time loop to run continuously until the present time = off time. I'm having a hard time finding an example of code for this operation (simple?), and I would really appreciate help. In the end, I want info stamp time to incorporate in my data file but not the priority now. As you can see my code is a mess right now.

    Use a timer past. Subtract the start time of the end time and the result of wire to the goal time of the timer has elapsed. The timer has elapsed will be in your loop. Boolean 'Elapsed time?' thread to your conditional control of the loop.

  • OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

    Hi all

    My iMac features are:

    • 27-inch, late 2013
    • 3.2 GHz Intel Core i5 processor
    • 8 GB 1600 MHz DDR3 memory
    • Start drive Macintosh HD
    • NVIDIA GeForce GT 1024Mo of 755M graphics
    • Storage: 301,35 free GB of 999,35 GB

    Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

    Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

    "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

    I would be very happy if someone can help me in installing this update.

    Thank you.

    Slpm6

    I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

    You are using a newer version of El Capitan that the updater contains and so cannot install it.

    (139598)

  • Replace the screen for one with a higher resolution on Satellite P850-12Z

    Hi all

    I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].

    Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?

    I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.

    I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.

    Thank you in advance.

    Hello

    Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
    I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.

    You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.

    All this is quite complicated.

  • Recovery process of the BIOS for HP with AMI BIOS systems?

    Hello

    I'm trying to fix a HP model a6718uk PC that has a motherboard M2N78 - LA and i think and AMI BIOS.  An update of the BIOS that came through HP Update failed, and the machine does not start.

    As it is out of warranty, the HP repair center want to £200.00 to solve this problem, although a simple BIOS recovery process should be enough - does anyone know the process for these systems BIOS recovery?   Everything I've read (not specific to these commissions) says that you should be able to update the BIOS (called AMIBOOT. ROM) on a diskette, CD or USB memory stick and start by pressing Ctrl-Home and it will perform the recovery, but I was not able to get this to work successfully.  HP provide a stand-alone update, so I extracted the file to update the SP.exe BIOS on the HP support site.

    Any help would be most appreciated!

    See you soon,.

    Andrew

    Hi André,.

    I wonder if HP change bootlock bios and it does not seek to the AMIBOOT.ROM.  It may be interesting to try AMIBOOT. BIN just in case.

    The link below is a link to a free hex editor, open the bios with this file and you should be able to see the extension will look for the bios.

    http://www.hhdsoftware.com/free-hex-editor

    Best wishes

    David

  • Describing the text for printing with effects

    Hi all

    I create a design that includes a (inner shadow) effect on a part of the text.  When I "Vectorize" to export the drawing to the PDF format (to be sent to the printer) the effect of inner shadow is denied.

    Is there a way to create outlines that will keep the effect?

    The files are attached - the original, that's what I would like, with '_outlined' at the end is what happens when I saw.

    Thank you-

    Sara

    You can do a flattening of transparencies custom which includes convert text to outlines, and who should do the conversion for you when you export as long as you export to Acrobat 4 compatibility to force the flattening, but the big question is why you think you need to convert to text converted to outlines for the printer? Built-in correctly fonts should work perfectly.

  • The execution of a stored procedure from inside the cursor for loop?

    I posted this in the SQL Developer forum, but I tried in SQLPlus and get the same error, so I think it's an encoding issue.
    I have a piece of code that I'm trying to write that will only be executed once. The goal: we have three tables relating to the pieces of information. Each table has a column that stores the number of site that belongs to the part. We want to copy the parts of a site to about 130 sites which don't have any info on parts. The number of site is stored in another table. So I created three stored procedures, one for each of the three tables that we, who take 2 inputs: a source and destination site. Procedure names are: ptfile_copy_fac, ptxref_copy_fac and ptvndrs_copy_fac.

    The problem I have is that I can run the procedures in a separate worksheet in SQL Developer, but when they are integrated in this cursor for loop, I get the following message from SQL Developer:

    ORA-06550: line 23, column 11:
    PLS-00103: encountered the symbol "PTFILE_COPY_FAC" during the expected in the following way:
    := . (@ %; immediate)
    The symbol ': = ' was replaced by 'PTFILE_COPY_FAC' continue.

    He repeated this for each of the three methods. I have attached the code I am trying to run below. He expects an assignment operator, but I have no idea why.

    If there is a better way to do this, by all means let me know. I'm a SQL Server guy, I'm not sure how to do what I do using PL\SQL.

    / * Declares the variables source_fac and dest_fac.
    The source_fac is the installation that we copy parts.
    The dest_fac is the installation we copy parts to.* /

    DECLARE
    source_fac facility.facility_num%type;
    INSTALLATION OF DEST_FAC. TYPE % FACILITY_NUM;

    / * Declare cursor to use loop for.
    Slider load number installation and the status of the installation.
    Is not installation of 1 or 2, since these will be
    the main source of facilities.*.

    CURSOR fac_cursor
    IS
    SELECT
    facility_num,
    div_state
    Of
    installation
    WHERE
    facility_num NOT IN (1,2);
    BEGIN
    FOR fac_row IN fac_cursor
    LOOP

    / * Test for the State of the installation. If a Canadian State, the source_fac value 2.
    Otherwise, the value source_fac 1.* installation.

    IF fac_row.div_state IN ("AB", "BC", "Mo", "NB", "NL", "NT", "NS", "NAKED", "WE", "PE",
    "QC", "SK", "YT")
    THEN
    source_fac: = 2;
    ON THE OTHER
    source_fac: = 1;
    END IF;

    / * Sets the installation of destination to the facility_num from the cursor * /.

    DEST_FAC: = FAC_ROW. FACILITY_NUM;

    / * Execute the three procedures, past of the source and dest AEC variable * /.

    run ptfile_copy_fac (source_fac, dest_fac);
    run ptxref_copy_fac (source_fac, dest_fac);
    run ptvndrs_copy_fac (source_fac, dest_fac);

    END LOOP;

    END;

    Published by: SunDevilKid on March 3, 2010 15:31
    Update the comments you make more sense of the code.

    EXECUTE is a SQLPlus command, change your code to

    dest_fac := fac_row.facility_num;
    ptfile_copy_fac(source_fac, dest_fac);
    ptxref_copy_fac(source_fac, dest_fac);
    ptvndrs_copy_fac(source_fac, dest_fac);
    END LOOP;
    

    Max
    http://oracleitalia.WordPress.com

  • means of a loop with associative arrays / objects: #1034: forced conversion

    I had a long post somewhere on here and just want to start a specific post on associative arrays just.

    First of all, I have a table which I do not know if it is an array, an associative array or an object, or both.

    That is to say: I read that below would be an object but works like a table also.

    The problem is when I use this table as references to instantiate classes in a runtime shared library.

    I seem to be able to create appropriate tables and objects, BUT I certainly can't use/acess them correctly. I have a massive confusion between movieclips and objects.

    I get an error of forced conversion when I try to add objects to a movieclip. just because I want to add the elements of mc to the scene.

    var definitionsArray:Array; 
    var bubblesArray:Array;
    var currentBubble:*;
    var correct:uint;
    var incorrect:uint;



    this.definitionsArray = new Array();
    this.definitionsArray.push({ sound:"AppleSound",mc:"Apple" });
    this.definitionsArray.push({ sound:"BananaSound",mc:"Banana" });
    this.definitionsArray.push({ sound:"BreadSound",mc:"Bread" });
    this.definitionsArray.push({ sound:"CakeSound",mc:"Cake"  });
    this.definitionsArray.push({ sound:"WaterSound",mc:"Water" });
    this.definitionsArray.push({ sound:"TomatoSound", mc:"Tomato" });
    this.definitionsArray.push({ sound:"SandwichSound",mc:"Sandwich" });
    this.definitionsArray.push({ sound:"PizzaSound",mc:"Pizza" });
    this.definitionsArray.push({ sound:"PearSound",mc:"Pear" });
    this.definitionsArray.push({ sound:"OrangeSound",mc:"Orange" });

    getData("library/food.swf", definitionsArray);

    function getData(libreria:String, matriz:Array)
    {
        this.definitionsArray = matriz;
        var context:LoaderContext = new LoaderContext(false,ApplicationDomain.currentDomain);

        var loader:Loader = new Loader();
        var req:URLRequest = new URLRequest(libreria);

        loader.contentLoaderInfo.addEventListener(Event.COMPLETE, onAssetsLoaded);
        try
        {
            loader.load(req);
        }
        catch (e:Error)
        {
            trace("Asset load error: " + e);
        }
    }



    function onAssetsLoaded(e:Event):void
    {
        this.cartelArray = new Array();
        var loader:Loader = Loader(e.target.loader);

        this.libreria = loader.content;//this isn't used

        //var mezclaMAtriz:Array = this.definitionsArray.slice();
        bubblesArray = [];
        for (var i:uint = 0; i < this.definitionsArray.length; i++)
        {
            var libraryDomain:ApplicationDomain = loader.contentLoaderInfo.applicationDomain;
            var mcClass:Class = libraryDomain.getDefinition(definitionsArray[i].mc) as Class;
            var soundClass:Class = libraryDomain.getDefinition(definitionsArray[i].sound) as Class;

            var obj:Object = new Object();
            obj.mc = new mcClass();
            obj.sound = new soundClass();

            this.bubblesArray.push(obj);
            placeBubbles();
        }
    }

    function placeBubbles():void
    {
        var bubble:MovieClip;
        for (var i:int = 0; i < bubblesArray.length; i++)
        {
            bubble = bubblesArray[i];
            bubble.addEventListener(MouseEvent.CLICK, onBubbleClick);
            bubble.x = 100 + i * 150;
            bubble.y = 100;
            addChild(bubble);
        }
        // start game
        nextChoice();
    }

    If you set as an object, and then use this way...

    bubble var: Object;

  • 'For' loop with a different number of iterations. Second, the auto-indexation of the tables with different sizes is done. It can affect the performance of the Vi?

    Hello

    I have a loop 'for' which can take different number of iterations according to the number of measures that the user wants to do.

    Inside this loop, I'm auto-indexation four different 1 d arrays. This means that the size of the tables will be different in the different phases of the execution of the program (the size will equal the number of measures).

    My question is: the auto-indexation of the tables with different sizes will affect the performance of the program? I think it slows down my Vi...

    Thank you very much.

    My first thought is that the compiler to the LabVIEW actually removes the Matlab node because the outputs are not used.  Once you son upward, LabVIEW must then call Matlab and wait for it to run.  I know from experience, the call of Matlab to run the script is SLOW.  I also recommend to do the math in native LabVIEW.

  • for loops with the name of the layer.

    I developed a script that checks if the layer color-101 exists in an open document.

    If the layer color-101 exists executes the block of code on layer color-101.

    If the layer color-101 are not running action Add layer color-101.

    Back at the beginning of the loop to check again

    I do it with a loop for and if statement.

    1. Why does the loop not stop when the loop count variable corresponds to the layer color-101 name variable?

    2. how the loop can return to the beginning to check again the presence of color-101 layer?


    Variable decalre

    app.activeDocument = docRef;

    var theLayer = "color-101;

    loop through the layers

    for (var i = 0; i < docRef.layers.length; i ++) {}

    the layer name corresponds to the loop variable

    If (docRef.layers [i] .name == theLayer) {}

    Execute the block of code for layer color-101

    Alert ("Layer" + theLayer + "exist.");

    }

    }

    layer color-101 was not found, enforcement action Add layer color-101

    Alert ('The' + theLayer + "' there is no layer: Run Add layer color-101 action. '");

    back at the beginning of the loop and check again


    Your loop does not actually stop to find the right layer. He is content to display the alert popup window, then continues. Also the 'not found' - part will still raise. And the comparison must be 100% equal without difference case or spaces or 'copy 12' - suffixes.

    Try something like

    Declaring variables

    app.activeDocument = docRef;

    var layer_found = false;

    loop through the layers

    for (var i = 0; i)< docref.layers.length;="">

    var layer = docRef.layers [i]

    If (Layer.Name.toLowerCase (). IndexOf("case-101") > = 0) {}

    Alert ("found layer:" + layer.name);

    layer_found = true

    do what needs

    }

    }

    If (! layer_found) {}

    Alert ("Layer not found!");

    do what needs

    }

Maybe you are looking for