Bug in the transition from the groups of tabs when the mouse is over a tab

Similar Questions

• Menu bar and 'new tab' button are white when firefox is open, each button becomes visible when the mouse passes over it. How can I fix it?

  The individual buttons reappear as the mouse moves over them. (file, edit, view, etc.)

  If hardware acceleration is the cause of the problems then this means that Firefox is unable to use the GPU to your chart view card in order to unload the main processor and perform actions more quickly.
  
  You may not notice any difference is most cases.
  The only solution is to check if there is an update of the driver for your graphics card.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Help! Movement of the object of continuous when the mouse is over - ActionScript 3.

  Hello! I'm working on a school project. Here is a picture of what I'm working on.

  

  My cursor in this film is the heart. When I move my mouse on Hello Kitty, she jumps - but only once. How can I make him keep jumping when my mouse is above it and make its judgment jump when I pull away? Here is the code below. If you can help that would be great!

  Also, because I'm new to ActionScript I might have messed up with the movement of the animation. Hello Kitty used to jump all the time without doing me anything. Then I copied the code of movement in my ACTIONS layer to the Hello Kitty object code stop(); . She is not jumping all the time, just at the time when my mouse flies over her... but she jumps only once and that's the problem. I want it to keep jumping until my mouse is above it. Help, please! Thank you!!!

  
  

  Import fl.motion.Animator; I COPIED THIS MOVEMENT OF THE MOTION TWEEN ON THE CAT

  "var kittyMotion_xml:XML = < time Motion ="15"xmlns =" "fl.motion. *" xmlns:geom = "flash.geom. *" xmlns:filters = "flash.filters. *" >

  < source >

  < source frameRate = '24' x = "8.95" y = "63.9" scaleX = scaleY '1' = '1' rotation = elementType '0' = 'graph' NomSymbole = 'Tween 1' >

  < size >

  < geom:Rectangle left = "-110.65" top = "-135" width = '221.35' height = "270.05" / >

  < / size >

  < transformationPoint >

  < geom:Point = "0.49988705669753786" x = "0.49990742455100906" / >

  < / transformationPoint >

  < / source >

  < / source >

  
  

  < keyframe index = "0" tweenSnap = "true" tweenSync = "true" >

  <>interpolation

  < SimpleEase ease = '0' / >

  < / tweens >

  < / keyframe >

  
  

  < Keyframe index = tweenSnap "14" = "true" tweenSync = "true" firstFrame = "14" y = "-63.55" >

  <>interpolation

  < SimpleEase ease = '0' / >

  < / tweens >

  < / keyframe >

  < / motion >;

  
  

  / * var kittyMotion_animator:Animator = new Animator (kittyMotion_xml, kittyMotion);

  kittyMotion_animator.play (); * /

  
  

  
  

  HKITTY_mc.addEventListener (MouseEvent.MOUSE_MOVE, mouseMOVE); MOVE THE MOUSE TO MAKE KITTY JUMP

  
  

  function mouseMOVE(event:MouseEvent):void {}

  HKITTY_mc.gotoAndPlay (kittyMotion_xml.currentFrame);

  }

  
  

  
  

  
  

  other_kitty_mc.Alpha = 0;

  Assign all to this other_kitty_mc event listeners, but have orders in the functions target the hkitty_mc you already have.

• If I let the the mouse pointer over the taskbar, it freezes and I can't move.

  original title: freezing of funds...

  If I left click on the desktop and then click on the task bar when I got on my pc and leave the pointer from there in the taskbar until the next time I use my computer, it works well. If I let the pointer anywhere on the desktop when I finished work and the mouse pointer will freeze right where he is and I have to restart maually in order to release it. I never met this case in the 20 more years that I have been using a pc.

  I downloaded and ran spybot search and destroy program majorgeeks.com and it fixed my problem of gel. I don't know what he did to take care of it, but it does the trick.

• Color Photoshop image changes when the mouse hovers over it

  Hello

  I installed Photoshop on a new server and when I open an image in Photoshop displays colors incorrectly. If I then move the mouse to the images it then corrects the color. I see not why he did it because I didn't see any changes to the default settings during the installation. Does anyone know why it does this?

  If I take an extract from the image and paste it into word, the image is fine, so it is on display in Photoshop at fault.

  Any help would be greatly appreciated.

  Sean

  Hello

  now, I found the resolution to this to Photoshop when it is installed on a Citrix Xenapp server and which was to change the following registry -.

  [HKEY_LOCAL_MACHINE\SOFTWARE\Citrix\ica\THINWIRE

  "DISABLEOSSFORPROCESSES"IS"PHOTOSHOP. EXE; ILLUSTRATOR. "EXE"

  Thank you for your help.

• How to highlight text when the mouse is over the text

  I would like to underline the text when I move the mouse over it? Is this possible with the JavaFX event listener?

  It is possible:

   final Text  text = new Text("Say 'Hello World'");
         text.setOnMouseEntered(new EventHandler() {
              @Override
              public void handle(MouseEvent event) {
                  text.setUnderline(true);
  
              }
          });
  
         text.setOnMouseExited(new EventHandler() {
              @Override
              public void handle(MouseEvent event) {
                  text.setUnderline(false);
  
              }
          });
  

• How to make text disappear when the mouse is over a button?

  Hello, I'm completely new to Flash, and well I need help. I created a page that contains static text in the Center.

  Page has buttons on the side and when I rollover a button text is displayed, but the problem is that when I rollover a button, static text in the Center is here and I want to hide as I can't read anything either because the texts are overlapping.

  How can I make the text in the centre disappear / hide when I rollover a button and how do I make it reappear when the mouse is the off button?

  I hope what I said makes sense.

  You can assign the code onRollOver and onRollOut buttons to the dispappear of text, but you will need make the text a movieclip with instance name that you can use to target to make it invisible.  In the example below, the button has an instance name of "btn" and the movieclip of text has an instance name of "text_mc".

  btn.onRollOver = function() {}

  text_mc._visible = false;

  }

  btn.onRollOut = function() {}

  text_mc._visible = true;

  }

• Recent update win7 XP. could hover the mouse pointer over the button of brand-pages-bookmarks would be open.

  mouse pointer hover on brand-pages-bookmarks button would open - low-point drop in a folder in the list would be open for more bookmarks.
  How can I restore feature. It was very practice-not by clicking on

  Hi montee11,
  Maybe it's the menu of bookmarks? You can activate the menu bar in Firefox by:

  1. By clicking on '3' menu bar
  2. Click on + customize
  3. Show/hide toolbars and select Menu

  Placing the cursor on the Favorites button on the toolbar is more open automatically, but it opens when I click.

• What is this small triangle in the address bar just to the left of the button refresh which turns blue when the mouse passes over it?

  Installed modules include:
  Adblock more
  Add to search bar
  Easy YouTube Video Downloader
  Hidden ELEMENT Helper for Adblock
  Flagfox
  Ghostery
  NoScript
  Tab Mix more
  TinEye Reverse Image Search
  Vertical toolbar
  WOT

  Hi ApolloSerenus,

  You are probably referring to location bar history. If you click this button, a list of Internet sites must appear. This article will give you information about the history of compensation.

  You should also look Awesome Bar - find your Firefox bookmarks, history and tabs in the address bar for other cool things you can do with the address bar.

  Hope this helps!

• Get rid of those little green words that appear when my mouse flies over the art.

  How can I get rid of these little green words that appear when I roll my mouse on my art.  It is said to anchor, line etc.  It's so annoying and I know it's a quick fix.  I just forgot how.  I'm in CS4.  Thank you!

  Two ways depending on what you want will turn off. command you will turn off smart guides altogether and in the preferences, you can disable individual characteristics are displayed.

  The last two will do what you want, but leave the actual guides popping up.

  Thank you this is one of those features that appearances is annoying but is in fact not a bit be used to will prove to show you how useful they are and you filter out them until you ned them.

  Worth the effort.

  

• Is there a way to detect the mouse during the event for the controls within a tab control?

  I need to change the mouse pointer when it moves on controls that are found in the tabs.

  Now when the mouse passes over the tab, LABVIEW does not detect the saperately of controls for the mouse over event.

  Is there a way to do what I intend to do?

  Your problem is with the Panel.Controls [] property. It does not return the controls that are inside containers (tables, tabs, groups) and returns only the container itself. As illustrated by Sam, if you want the references to the controls in the tab, you must get the references to the pages and get the controls on each page and add them to your original table and do this recursively.

  You can either write a VI to do this (or search for it. There was posted here screw that analyzes recursively the FP for all control references) or everything just statically for this control a tab and move. There is also a VI delivered with LV that can help you with this, but I suggest that you not use, because it will be difficult to operate if you generate an EXE file.

  And I also recommend the Tool of Capture of Code.

• property of the mouse to the image control

  In LV 8.5 I noticed that if you reset your image to the default control (using the menu drop-down), the position property of the mouse no longer works, it will always return 0.0 no matter where the mouse is in control.  You must destroy and recreate your image control to fix right here.

  Perhaps this problem has been fixed in later versions of LV but I didn't know any documentation of the present.

  Good afternoon Garvacious,.

  When you say that the pop-up menu, I guess you want to tell the menu that is displayed if you right-click on the control.

  I just tried this in LabVIEW 8.6.1.  My position of mouse cursor reads 0.0 when the mouse is over the control and -1, -1 when the mouse is not over the control.  It is a bug.  I have filed the appropriate internal documentation (Corrective Action Request #167102), while R & D is aware of the issue.

  Thanks for letting us know about this behavior.  I'm sorry for any inconveniencce this bug you has done.

• State of the mouse with menu items that overlap control

  Hello

  I have a problem with the recovery of the location of the mouse using GetGraphCoordsFromPoint...

  I use the return status of GetGraphCoordsFromPoint to determine if the mouse cursor is over the plot of my graph control area (1) or not (0) to switch between styles of mouse (VAL_DEFAULT_CURSOR against VAL_CROSS_HAIR_CURSOR).

  It works in most cases...

  Above the Panel, there is a bar menu, located below is the xy graph. Now, if the mouse opens a menu and is the style of mouse on the menu (and also on the chart) depends on history of mouse:

  If the mouse has always been above the menu, it is not recognized by GetGraphCoordsFromPoint be loacted in the graph - which is what I would like to see, in this case of the style of the cursor is always the default style.

  Now, if the mouse leaves the menu for a short distance, the menu does not disappear (only if the mouse is to a greater distance) and acccordingly GetGraphCoordsFromPoint realizes that the mouse is over the chart. It is correct and as expected, too. (the style of the mouse is replaced by a sight then)

  Now, if I move the mouse over the menu, it is not recognized by GetGraphCoordsFromPoint, unfortunately, and the style of the mouse is not being in default.

  Am I missing something, or is there a way to fix this behavior? Styles different from the mouse on a menu is confusing for the user, and I would avoid it, of course

  Thank you...

  Hi Wolfgang,.

  It is not a very good way to work around this problem. As you found, Panel moving events are sent to the callback of the Committee even a menu is followed, and when you change the cursor of the mouse that it also affects any menu that can be active at a time.

  If the cursor changes do not at all while the menu is active, even if the user moves on the graph, there is a possible strategy don't mind you can pursue to remedy the situation. It consists of trying to detect if a menu is active, so that you do not change the cursor when the menu is active. Unfortunately, this is easier said than done. Although it is easy to be notified whenever a new menu is activated (via a menu drive recall) there is no right way to be notified when the menu disappears. And there are several ways in which it can disappear. So it is not possible to set an internal flag that tracks when the menu is active.

  However, it is possible to know if the menu is active at the time you receive the Panel move event (or in the timer tick event, although I'm not completely sure why you also use a timer). You can't do it with the UI CVI library, but you can, using the Windows SDK, in a way a little round point.

  The idea is to know which window is the top-level window. And if she is not the window of the Control Panel, then you should be able to assume that a menu is active and therefore refrain from changing the cursor. Note that you must also make sure that the active window belongs to your process, because there could be a number any other windows that might be the 'top' window at any time. But if it belongs to your process and it is not your Panel, then presumably it's the menu.

  I did a quick test with the following code and it seems to work, although you might want to test more thoroughly I did:

  topHwnd = GetTopWindow (NULL);
  GetWindowModuleFileName (topHwnd, topHwndModule, MAX_PATHNAME_LEN);

  GetPanelAttribute (Panel, ATTR_SYSTEM_WINDOW_HANDLE, (intptr_t *) & panelHwnd);
  GetWindowModuleFileName (panelHwnd, panelHwndModule, MAX_PATHNAME_LEN);

  If (! strcmp (topHwndModule, panelHwndModule) & panelHwnd! = topHwnd)
  return 0; do not change the cursor, unless the Panel is really on top

  Good luck

  Luis

• Images within the passage of the mouse (score) not included when compiling WebHelp Pro

  The start of my RoboHelp 7 project page contains some mouseover (hover) functions. Those who surround buttons that change their layout when the mouse pointer is hovered over. I used JavaScript and writing directly in the HTML code.

  The preview works very well. When the version of WebHelp Pro is compiled, only the first images are copied to the respective folder. The underlying images, which appear when the mouse hovering over the area, are absent. How can I make RoboHelp recognize these images when compiling? What I owe their index somewhere?

  Of course, I could copy into the folder structure (then everything is displayed properly.) manually. But is not practical, because I'm not the only programmer/designer and will not be the admin when the project will be online. So I need a solution for automatted.

  Kind regards

  Wolfgang

  Hi again

  First things first. You mention WebHelp Pro. You are posting to the RoboHelp Server?

  Normally, you won't see a "Baggage Files" folder on your hard drive. If you just added to the luggage, the files would have ended at the level of the root of the project. Luggage is more a concept than anything else. This is a list that RoboHelp maintains content that you tell him to take when you create the output. In addition, if your project uses folders for organizing, you also ensure that you place the files in the right folder when adding to the luggage.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 days - $24.95! Adobe Certified RoboHelp HTML Training SorcerStone blog RoboHelp EBooks

• Item selection listbox with right click of the mouse

  Hello

  I have a ListBox with unchangeable elements.  Y at - it an easy way to select an item with a click of the right button (like the left click)

  Create a structure of the event and generate an event on the mouse down? event.  Then use the button terminal to determine if the right button is pressed.  If it was, then set the value of this list box to the line that the mouse is over.  You can do this by using the invoke the end node.