Bug of Linksys WRT54GC Mode of operation of "router"?

Similar Questions

• Cannot connect my HP Photosmart c309g-m printer to my Linksys WRT54GC router. "No filtering = FAIL.

  I have problems connecting my HP Photosmart c309g-m to my Linksys WRT54GC router.  The diagnostics report says "no filtering = FAIL" in all my attempts.

  First I had implemented security wireless to the router with a personal WPA2 password.

  Because this does not work, I spent my WPA security, given that the diagnostic report suggests that this is what he actually uses for encryption. This no longer works.

  I double and triple checked the MAC address of the printer in my MAC filtering wireless settings. He was right. However, he didn't always connect.

  Reluctantly, I turned MAC filtering. However, the printer still wouldn't connect.

  Now, I'm out of options. All possible ideas for this problem?

  Here are a few ideas:

  1. check that the SSID is being broadcast.

  2. make sure that DHCP is active.

  3. don't use MAC filtering (it is not a security measure, in any case).

  4 change the channel from router to 11.

• HP 50 g: Bug in LASTARG after MOD and other orders of CASES

  I mind not to check if this has been reported before, because it is a bug, and duplicate bug reports should be published until HP fixed them in a new ROM for HP 50g.

  I use the command MOD (in RPN mode in any case), example: 10 ENTER 7 MOD gives the correct answer 3.

  LASTARG appeal immediately after gives an error real mode (!). If it is in the complex mode, or if it end being "politely" beeps to, LASTARG (or ARG on the keyboard) returns 0 instead of 10 and 7 single argument. It's totally false; requiring complex mode (instead of real - the initial calculation has nothing to do with complex numbers!) is ridiculous, and give the wrong answer is just a slap on the face.

  HP 50 g HP50-C revision 2.15 version.

  Hello

  I also have HP 50 g HP50-C revision 2.15 version.

  LASTARG (white-shift YEARS (on the = key)) works correctly for me.

  Moving to the ARG red (on the divide key) is the function Argument: Returns the angle (real) polar theta of a complex number (x, y), so eager to work on mode calculator complex.

  For a manual with descriptions of orders 50g, download it

  "HP 48gII and 50 graphic calculator g advanced manual reference of the user (V2).

  From:

  Manuals HP - 50 g

  Kind regards

  BartdB

• Bug with fluidity in Mode 16-bit tool

  You use the latest version, when I use the tool flow in 16-bit mode, it leaves a bright window discolored in the center of the image when I get back to the original. It seems to work fine in 8 bit mode. Is this a bug known, that work to correct?

  Hi geocann,

  It's a known bug in Photoshop CC2015.1 However, it has been fixed in the CC2015.1.1 update

  Use this link to download Photoshop CC2015.1.1: keeping up to date of Photoshop

  Reference link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Kind regards

  Claes

• Lightroom 6: Crop Bug in Lights Out Mode

  I just upgraded to Lightroom CC/6.  When I'm in stand-alone mode reframing, I hit back to run harvest, and darkens the entire image area.  I leave the stand-alone mode to see the image.  I use this workflow, please fix this bug!

  Dave

  I duplicated it 10.9.5 and filed a bug with Adobe.

• Could not load the Mode of operating unit using fndload.

  Hello experts,
  
  I'm migrating a competing using a TDL of an instance file to another program. As you know has R12 of this security feature where you can run the program with the operating unit single or multiple mode. I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?
  
  Here are the steps I did:
  I copied the XXF5_PO_PRINT.ldt file to $FND_TOP, patch, 115, import directory
  Run the following command:
  FNDLOAD apps / DOWNLOAD < < password > > O $FND_TOP/patch/115/import/afcpprog.lct XXF5_PO_PRINT.ldt PROGRAM APPLICATION_SHORT_NAME = XBOL CONCURRENT_PROGRAM_NAME = XXF5_PO_PRINT

  I ran fndload for download the concurrent program to another instance and it ends without error, but it does not affect the operation of the single unit. It has the value null. If someone has encountered this?

  This is set on the source instance? You can find it in the ldt file? If so, you can modify the ldt and try the same command again.

  In addition, please use CUSTOM_MODE = FORCE or UPLOAD_MODE = options to REPLACE and see if it helps.

  Advice on FNDLOAD [ID 735338.1]
  FNDLOAD Download / Upload of concurrent programs fails to load settings [ID 1101946.1]
  How to manually download the files "ldt" [1092694.1 ID]

  Thank you
  Hussein

• possible bug in colorTransform-related mode full screen (projector and standalone flash player 10)

  Hi all

  It seems to have hit a bug in the current drive (tested on 10.1.52.14):

  If I programmatically change the color of a sprite consisting in a text and a circle the output is different if the application is in mode full-screen (the text is not colored in fs)

  In my class mousedown event handler I call the following (slightly simplified the code to make things easier to understand here):

  var cTrans:ColorTransform = new ColorTransform();

  _hColor =0xD78500
  Recolor the clicked sprite
  cTrans.color = _hColor;

  this.transform.colorTransform = cTrans;

  This is what I get in windowed mode (expected behavior):

  It's the same sprite full screen:

  I can switch between windowed mode and full screen and the text gets colorful or not, as stated above.

  Anyone got clues about what's going on? I mean that's not supposed to probably not be that way...

  No solution (easy) workaround?

  Thank you very much

  Mike

  Well I tried to make a projector and do not see with it, but then again my install puts 10.0.22.87 in the projector.

  I could try changing the Sprite to a MovieClip and see if that helps.

• What is the Mode of operation WRT54GS?

  
  

  Fix.

  Router mode = disabled NAT
  Gateway = NAT active mode

  This should be the main difference. Sure, it has some effects on dynamic routing (RIP) because with active NAT routes from the local network will not be published and sent to WAN.

  As long as you have your installation gateway mode should work fine, regardless of the BEF. But it is impossible to say without knowing the exact configuration you are trying.

• BIG BUG: Pre stuck on mode headphones! Help

  I was listening to music on my pre and had plugged my earplugs I call then I unplugged them and now I can only make calls using the speakerphone or bluetooth headset and the internal speaker stopped working. During a call, if I look at the icons at the bottom of the screen of dial pad, left down to switch to speaker mode icon is now an icon of headphones, and if I press it, it goes into speakerphone mode. I can't go back to the normal mode. I restarted my phone several times, tried everything I could, it has been 2 days and still can not make a normal call.

  Please help, and no, I don't want to reformat my phone

  Sometimes the switch inside the headphone jack can get stuck

  Try to take your helmet and inserting and removing the decision-making of several times and see if the audio returns.

• Don't want to see the title bar, address bar, toolbar mode of operation.

  Jin
  
  I need to install the application on the client side.
  Here, I don't want to show him the title bar, address, bar the toolbar in operation.
  I want to, the application must be run in either full-screen. For this I created an icon on the desktop, through this user can acess application when the user clicks on that icon then user out by the log in page.
  Purposes of titles, I want Address Bar etc.
  How can I use applications using the full screen.
  
  
  Thank you

  Hello
  to launch Apex, we use a file like this hta:

  
  
  

  <>
  ID = "MyApex".
  applicationName = "Apex".
  Border = 'thin '.
  borderStyle = 'normal '.
  Caption = 'yes '.
  contextMenu = 'yes '.
  Icon="C:\apex\apex.ico".
  innerBorder = 'no '.
  maximizeButton = 'yes '.
  minimizeButton = 'yes '.
  navigable = 'no '.
  Scroll = 'yes '.
  scrollFlat = 'no '.
  selection = 'yes '.
  showInTaskBar = "yes".
  singleInstance = 'no '.
  sysMenu = 'yes '.
  version = "1.0".
  windowState = 'normal' >

  
  

  Maury, name the file apex.hta and try out it.

  Gianluigi

  Edited by: gianluigi.trento the 15.09 8-Apr-2010

• 9810 blackBerry smartphones is still in mode 'sleep' operated out of Holster

  All my other blackberrys are out of fashion "standby" when removed from the case of proximity of blackberry. My 9810 new does not work. He's dating the white screen (sleep) and I have to click one of the buttons to wake him up. It is not a horrible thing, but a big annoyance.

  Can someone tell me if there is a way to change this. I looked at exhaustion.

  Thank you

  using a blowtorch holser?

  others have loving in the wrong place

• Linksys makes a Combo of Modem/Router Wireless N cable

  Does Linksys router wireless n gateway, a combination router and cable modem?

  Currently I have the unit combined for wireless g, but upgrade to wireless-n.

  Thank you!

  I think at the moment that doesn't sell Linksys 802.11n gateways.

  I generally recommend not getting the combined devices, but better to get two separate devices, a simple modem and a wireless router.

  1. you have a far greater choice of products for the router, and they are usually less expensive.

  2. in the event of the death of the router you can still have internet via the modem directly. If the combined unit dies, you are in offline mode.

  3. less functions in a more simple design makes the device and averages more stable and more reliable devices.

  4. you can replace a device at any point. For example, if you pass the ADSL or FTTH cable you can simple replace the modem. You may need to change the configuration on the router but other internet connection so that you can keep the router. Similarly, if two years from now, you want to get the router new generation wireless you can continue to use your modem (if it is still suitable for your internet speed)

  Some thinking...

• Linksys RV082, problems of https RV016 router

  Problemas con Cisco Linksys RV082 y RV016, fr pages that manejan https example www.logmein.com al iniciar sesion me dead nuevo has the pagina inicio sesion begins, al encuentro real are una identidad suplantacion posible, por fucnion than tiene el balancear RV carga as cambia UN modem a modem as free mas este otro , esto're uno los problemas con los me sown y aun no he could did en UN buen tiempo, alguien como dress conocera este problemon.

  Gracias of photos.

  Problems with Linksys RV082 and Cisco RV016 in pages that https handshake, for example, when you connect www.logmein.com returns me back to the home page of connection, I find that when investigating a possible identity theft, the RV fucnion is responsible as it changes from one modem to modem another which is freer, it's one of the problems that I have found the balance and I have not been resolved in a while someone will know how to solve this big problem.

  Thanks in advance.

  Enrique,

  On the RV082:

  1. -> Double-WAN management system
  2. Change of balancing load (Auto Mode) at the bottom of the page you will now see binding protocol
  3. Select HTTPS [TCP/443 ~ 443] in the menu drop-down
  4. Select the source IP address or range: (i.e. 192.168.1.100 to 150) that will bind HTTPS for any LAN device that uses an IP address in this range.
  5. Select the address IP of Destination: leave generally to 0.0.0.0 to 0.0.0.0 for all destinations
  6. Select the Interface to bind the Protocol (WAN1 or WAN2)
  7. Check the box enable and add to the list. Save settings at the bottom of page.

  On the RV016:

  1. Management-> multi-WAN system
  2. Look for the setting of the Interface to and select Edit to WAN1.
  3. Follow the steps above.

  Please let us know if this helps or if you need further assistance.

• Bridge mode... Router and TC

  My internet does not work if I have my xfinity on bridge mode router and my TC on mode bridge?

  Bridge on the modem/router and Bridge Mode on the TC will not work.

  Xfinity modem/router must be configured as a modem only simple only (in bridged Mode), and the TC must be configured in router Mode of DHCP and NAT

  or

  Xfinity modem/router must be configured normally as a modem/router, and the TC must be configured in Bridge Mode

• Switching mode of EPC 3925 / router E3000 speed 20% loss

  my setup is EPC 3925 Switch mode - E3000 router mode

  my ISP speed is 200 Mbps I only have 160 MB/s maximum and is not stable

  When I use the EPC 3925 I get 200 Mbps

  can someone explain why this happens

  takwansani wrote:

  Thanks Meegosh and nerD_sayer for answers

  one last question what happens if ask my ISP to swap the 3925 to a modem router as the 3208

  I gain speed?

  Yes. It is better to have just a modem ordinary to avoid double NAT issues as well as port easier opening if it is necessary to do so.