[Bug] Pre mode screen 'night' when the Touchstone during the day in 1.3.1
After the 1.3.1 update when I put my Pre on the touchstone to charge, it seems to behave as it does in the night (or dimly lit room): after 30 seconds, the screen fades, and then the lock screen comes on. 1.3.1 when I put my Pre on the touchstone in the light of the day, the screen would stay on and active (without lock). I really liked this feature of the touchstone - I have it next to my computer on my desk, and it's a bit like an additional screen.
Is this a bug or what?
Called Palm support today and the response has been as part of the upgrade and no way to go back to the way it has been. Wrong, this is a good feature don't know why they spend it.
Tags: HP Tablets
There are two screens (split screen) showing when the computer is turned on. How can I delete one side to return to a view?
When did you start in this topic? Were there recent changes to the computer like installing new hardware, software or updates? If it is a recent issue, follow the steps in this document to perform a System Restore. This will restore your comuter up to a point located before the show.
If you have antivirus software installed, run a scan of filling. You can also use Microsoft Security Essentials to scan your computer.
When the screen is off and empty is there a way to get screen back on without having to open the phone?
Press the power button.
When I turn on my new Sony Xperia Z5 Premium landscape mode, I can vaguely see a lot of horizontal and vertical lines on the screen.
But when I shoot in portrait mode, you can't really see them more
I tried the 4K images and video to see if it was only a matter of scale down, but it wans't ' t. Even at 4K, I always saw them.
Finally, I used a magnifying glass, just to make sure I wasn't seeing things, and I, they were much more noticeable under the magnifying glass.
It's rather annoying. I want to watch YouTube or websites in landscape mode, but the screen will look pixelated. Reminds me of the old QVGA screens. Loses clarity and crispness of images, videos, etc.
In addition, it seems to be points, LEDs, I don't really know what they are, in the screen of my phone, without worrying if my phone is turned on or off. They can be seen when the light is reflected by the screen. I did not have this problem on my Z1 or Z Ultra.
If it's a screen defect, please let me know, so I can return the phone while it is still brand new condition.
That's right, the lines are the digitizer behind the glass and is present on all Xperia devices and visible on different angles.
Hello, I bought a laptop from lenovo y50-70 about a month ago, model 59445062, and I noticed a strange problem when using flash player content on Web sites. When the battery power, playback of flash content is slow and the screen starts flashing like crazy, especially when you start scroling around the page. However, when I plug the charger in all problems disappear and everything is fast and smooth. Student in computer SCIENCE, I have a hinch that it could be related to flash player and driver of integrated graphics, but the test of the integrated on high graphics demanding applications (games) there are no noticeable artifacts or flashing, even on battery screen. I use windows 8.1 x 64, all the updated drivers to update, flash player update. I hope you guys find a solution to this problem.
I am also attaching a video of the problem in action.
Yep, just recently received my laptop repair, found to be bad cable of the lcd screen.
Does anyone know why my Windows PC screen flashing when I try to use the selection tools in Photoshop CC?
Hi - Thanks for your comments. He went on all the selection tools, however I solved the problem by changing the "Advanced Graphics Processor Setting' to 'Base' in Photoshop CC.
I play the daily Microsoft Solitaire game, all of a sudden I can't play the game bearing the title Microsoft Solitaire because is on the screen along with the circle of continuous movement, please advise, thanks in advance.
I think the problem was with the game itself, all of a sudden the problems seem to have resolved itself, I wasn't the only one who had this situation according to the questions on the Internet, but thanks anyway, Anng.
See this file:
You will see that I have nothing to off on the side that would cause this behavior I learned other threads.
Here is the live site:
Not sure what's the bug, but I really need to know what it could be. This information is copied/pasted my version of office.
Liberty Mutual Insurance logo at the bottom is placed much too right.
See you soon,.
So when I closed the lid on my laptop for a while and then reopen the lid, the screen remains white (black). The only way I found to get back on the screen is to re-boot.
In power management, I put 'Status quo' for when I close the lid on my computer and power management is ' Always on '.
I have the latest Bios and updates to the system.
Satellite Pro L40 - 15A
Any help appreciated.
You use the version preinstalled Windows from Toshiba or is it your own installation?
What to update the display driver? Take a look at the Toshiba page for the new display driver:
http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
Don t forget to look in the * archives * on Toshiba page because this model is a little older, so all of the downloads are moved in archive.
Check this box!
When I connect my new Qosimo X 500 - 058 to monitor external (with the help of an HDMI to DVI converter cable), everything works well until the power of Windows application options off the monitor.
Once this has happened, the screens don't wake up and stays black.
The PC were not crushed, and if you press Ctrl-Alt-Delete, you get the normal menu options.
But if you press Cancel, or lock, and then enter the password, the screens go black again.
This problem does not occur if I remove the HDMI cable and use only the laptop screen.
I found that if you select the option change user after pressing Ctrl-Alt-Del monitors come back to life after a lot of glitter, if at least I don't have to re-boot each time. Does anyone have any suggestions on how I trouble shoot this?
Have never heard about this but anything is possible. It will be interesting to see if the same problem persists without DVI converter cable.
When this happens can you use FN + F5 key combination to turn on the transparent back of laptop?
Original title: cannot set mode standby.
When I click on the sleep button, the computer is axactly off, when I try to wake him to push the button of CPU power, it reboot the windows from the beginning, not directly on the desktop
· You have the latest drivers installed on the computer?
· If it works well before?
You can read the following article and see if it helps.
When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.
Thank you for visiting Microsoft Answers.
I have some steps that may help you.
Try to take a screenshot of the library. To do this, follow these steps:
1 open Windows Media Player.
2. open the library and click on the following combination of keys
-Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).
4: open Paint or Microsoft Word, and then press the following key combination
-Ctrl + V which will stick to the screenshot that you took
3. adjust the size n PRINT
You can try export playlist of media information by an application word by following the steps in the link below:
We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.
The process is a little different:
Follow this workaround solution to install the exporter of media:
Step 1 - Download and install Media exporter Info
You can try to run the program in compatibility mode for Windows XP.
Make older programs in this version of Windows
Step 2 - use of the exporter to export of information media
Open Windows Media Player. A small Media exporter Info window must already be open. If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media. If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.
Click Properties to select where the file is saved and what application to load it in. Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).
Click Export. The file will be exported, but it will contain much more than just artist names and album information.
See the link given below where the user had a similar problem.
Hope the helps of information. Please post back and we do know.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
When my screen is placed at an angle less than 90 degrees, it becomes empty? his fine wen back past 90 degrees, but goes blank when his attacker
Check with the manufacturer of your system, their books online and their forums (if any) than
probably is by design. No matter what is not a function of Windows.
Control Panel - Power Options - choose the closing cover
But that does not affect the sensitivity, or if he stops everything which the hardware manufacturer
may have set up.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
It started to happen about 6 of my users. When they unlock their 8900's that the Enterprise Activation screen appears (with no informed information) run us BES5.0 and these devices have been activated for at least 12 months. No money changers have been made to the server or policy in more than a month. Everyone knows this? Obviously all what they need to do is to close it, but then it comes back the next time that they unlock the device. Thanks, Edd...
I just found this course to blackberryforums, it seems that a reactivation of the unit does not seem to solve the problem... I'll give it a try later today if I have time, TGIF!
In the morning a few last that I was wake up an empty battery and I were not able to find a reason why. For example, last night, I have to close to 33% and earlier this morning it is 2%. My laptop used may use one/zero to 100 during the night, so I don't know what it is.
The laptop isn't a deal and is closing completely. During the closure, it is either not sleep or something it is waking up. I looked at the activity monitor and nothing takes too much energy (but something could stay while it is supposed to sleep, but I don't know if there is a way to check that).
I'll leave it open tonight and just push sleep in the menu apple tonight and see how it works. Even if it works, I wish I could just shut up because this is supposed to be able to do.
Also, I recently downloaded Skype plugin and it's, it's the only change I made in the time this problem started, which may have something to do with it.
MacAir 11', at the beginning of 2014
El Capitan 10.11.4
Reset the SMC. Choose the method for "If the battery is good behaviour."
If this does not help, the backup computer and reinstall OS X from recovery.
Maybe you are looking for
I have 14 cookies with 0 bytes that settle 12-30-5000, how do I get rid of them?
Earlier, I downloaded the single pass software from my laptop driver download page. But this time, the link is absent. My laptop is HP Pavilion dv6-6011tx. May pleas you give me the download link for the latest verion of the Simple collar? Why the li
I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.
When you try to open it, it says unidentifide problem windows can not open
When I start Windows XP, I get a notice in a small box centered on the screen that reads: dll error under thatCan dll-Res t of load lower than loading OK in a smaller box. I click and it comes back several times, for example, when I go on line and lo