Bug? Remove the first 2 pages changes object order.

Similar Questions

• Delete in af:table always remove the first line when using ExecuteWithParams

  Hello world

  I got a page with master form and af:table two details related to the master. When I'm trying to remove a line in an af:table of detail, it always removes the first line, any line, I selected before. The table has a single = rowSelection and the line is properly visually selected. I remove the line using a "delete hyperlink" on each line, but I first have to select the line. Delete called a bond (or a method at the bean by removing the current line of the iterator, I tried both, none of them work)

  Links page has an ExecuteWithParams defining the correct ID to edit on the master of iterator and an InvokeExecuteWithParams the renderModel value. If I put the refresh condition zero and I hard-code an ID in the binding variable in the model, I am able to delete the selected line.

  In addition, I don't know if this information is useful, but if I set the iterator to PPR ChangeEventPolicy, when I select a line, there always select the first line.

  Any ideas what I could do wrong? Is this a bug?

  I use JDev 11.1.1.7

  Thank you

  Guillaume

  You can try creating a method in ApplicationModule for filter master records instead of executeWithParams?

  Ashish

• remove the small green page border

  Hi all

  Someone at work here inadvertently placed a thin green border around each page.  It is in normal display mode.

  Tried change the color of shapes field in the preferences.

  Through the Acrobat Search provided and frequently asked questions, no luck.

  He did not attach layers of this document.

  Cropping does not remove the border.

  Can someone tell me how to remove the lean green page border when displaying?

  Thank you

  Starsky

  X_Windows Acrobat 7

  The green box is probably the box trim being displayed because of your preferences settings: Edit > preferences > Page Display > Show art, trim, & bleed boxes

• Remove the first 5 blocks in a data stream

  Hi all

  I have a problem to remove the first 5 blocks in the data stream. My sampling rate is 1 s, block size is 1 and the entrance is the module «the ddf file read»

  I use the following modules for an average analysis 30 years running.

  [read the folder]---> [Formule1] -> [set variable] -> [formula2]

  |                 ^

  --> [time]-|

  module parameter

  ======                =========

  delay of 30

  Formula1 ${var_1} + in (0) - in (1)

  the value of variable ${var_1}

  Formula2 in (0) / 30

  This configuration is used for channels 13 and one of these channels is used for purposes of triggering. Due to the nature of the variable defined and read in the underlinedmodules, the trigger sequence is delayed for 2 sec. Since I used the trigger to collect the last returns average of each channel, it is now mixed with 2 sec for the next round.

  My question is: is there a way to reduce say 5 blocks of data from the stream? Please help and have a nice day

  Look at the SEPARATE module in the Group of data reduction.

  It allows you to set up an initial leap, then a current break.

  To do this, you want to jump 5 blocks once, does through go zero blocks... who spends the first five and then release all the data blocks of subsequence.

• I have a purple yahoo page and a page of yahoo to blue color. I can't understand how to remove the purple color page.

  I have a purple yahoo page and a page of yahoo to blue color. I can't understand how to remove the purple color page.

  original title: pages of Yahoo

  Hello

  I suggest you contact Yahoo! help for assistance.

  http://help.Yahoo.com/l/us/Yahoo/helpcentral/helpcentral_contactus.html

  See you soon.

• I have a text field. I need to remove the first 8 characters of the field, leaving the remaining characters. Help?

  I have a text field. I need to remove the first 8 characters of the field, leaving the remaining characters. Help?

  Example:

  

  I need to remove these numbers PXXXXXX. Leaving the other characters.

  Thank you

  Bob

  A normal 'substring' is what you're looking for.

  For a formula of the column in the response criteria tab:

  SUBSTRING ("YourPresTable". "YourPresColumn" OF 9)

  

  To make the RPD and the workload of shipping off the coast to the database rather than forcing the work on the server of the OBI or presentation:

  Substring ("01 - Sample App Data (ORCL)" ".." ") "" "BISAMPLE '." " D10 product (dynamic table)". ("' Prod_Dsc ' 9)

  

• How can I remove the first 3 characters of the files?

  I'm using the bridge for a while and rename the lot

  How can I rename to remove the first 3 characters of the files?

  (these are numbers)

  

• Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

  Hello

  I ve a problem with Muse.

  Why are on the first web page are buttons and following pages Don t-shaped? All Pages are based on the same Masterpage.

  Any ideas?

  Stefan

  Hello Stefan,

  Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.

• How can I remove the white fringes around dark objects - Elements 10

  Landscape photos in differential high contrast areas I get a white fringe. How can I REMOVE this?

  R_Kelly wrote:

  This can happen with a photo that has been sharper.

  I also found that the effect of the new "shake removal" is inclined to create similar artifacts.

  Sharpening works around the edges to change the brightness of the darker and lighter side on the edge. Closer to the edge, the lighter side becomes even lighter, darker becomes darker. The limit on the Board now has a lot more visual contrast.

  One way to thwart the "oversharpening" is to use a reverse action (blur).

  The effect that can produce a similar action on the edges in the opposite direction, is the "Gaussian" filter blur. The same idea is also used with the method "high pass sharpening layer.

  The problem with the "fuzzy" is that it removes the sharpening anywhere, and not only where the white objects are a problem.

  The first idea is to use masks to limit the effect around the areas at issue.

  The other idea is to use a "fuzzy" selective running only on the clear part of the edge.

  To try this, select a test with details of file image and sharpen strongly to the visible white fringes.

  -duplicate your background.

  -Apply the filter ' other > high pass with a radius of 1 to 3 and choose a like a soft light blending mode. (even more sharpening)

  -reverse this layer: blur effect as with Gaussian blur.

  -Stamp visible (create a new layer with the resulting effect)

  -remove or hide the high pass layer

  -set the new layer to "compete."

  The result is that you always keep the original on the dark side of the edges, while sharpening effect by masking the effect on the lighter side.

  Of course, using masks to apply the effect on the areas with problems is also to be considered.

• Remove the assets of page containing a URL value

  Hi all

  A newbie question.

  I deleted an active page, which contains a URL "abc/xyz". And later, I created a new page that I would use the url "abc/xyz". Now, WCS said to me that ' URL already exists in the system. Provide a URL of substitution "."

  (i) so, how to 'release' a URL that has been used in a page, which had already been deleted?

  (II) and is it possible UI contributor?

  Thanks in advance for any help.

  Hi Alchn,

  This bug has been fixed in Patch 4.

  17614551:

  Description:
  Deletion of an asset does not remove the load webreference.
  File (s):
  xcelerate/src/main/java/com/openmarket/assetframework/common/BulkTransactionalAssetManager.java

  Simply check the patch that you environment is on. If possible, please apply patch 4 or higher.

  Even if the URLS is not removed automatically when an asset is removed, you can work around this by using tools-> URL system, in the Admin tab and delete all vanity URLS you have created/associate assets removed.

  Find more details in the Administrator's Guide to Sites WebCenter under Chapter 24.3 - using Vanity URL with System Tools - http://docs.oracle.com/cd/E29542_01/doc.1111/e29636/config_vanity_url.htm#CIHHJDAH.

  Kind regards

  Lydie

• Problem with the tool of markup for text editing in Adobe Pro XI on a Mac automatically remove the first character

  When I use the markup of text editing tool, I pointed out a word/phrase/sentence and then start typing in the replacement, the first letter is automatically highlighted and then removed when the second letter is typed. Thus, each word/phrase/sentence I type is missing in his first letter. Very annoying and has just started happening recently.

  Someone else encountered this?

  No idea how to solve this problem?

  I use a Mac.

  Hi LPerkins,

  The issue that you are facing is known for us and a Bug was registered for the same.

  The engineering team works to its difficulty. This only happens on Mac and on Windows.

  Kind regards

  Rave

• Prevent the Navigation bar to appear when the first help page is loaded...

  Hi all (again!)

  A simple I think (hope). Basically, the situation is that we want a first page of the webhelp that provides links to various sources - a blog, contact numbers etc etc and we would like this page to * not * look like if it was just the first page of the webhelp. We want to achieve this by not having not the navigation on the left side bar. Because it is able to be open or closed, no doubt there is something that can be changed to make the default state of the Index.htm file to be 'Closed Navbar'? I had a look at the HTML and changed a few likely suspects, which none did work...

  Does anyone have an idea of how would you doing so?

  Thank you

  Hello

  See http://www.wvanweelden.eu/robohelp/webhelp/skinwebhelp/hide_toc_on_load

  Take a bow

  Willam

• Why the first Firefox page tell me that I do not use the latest version when the "about" in the menu help says I?

  I updated Firefox 2 days after seeing the message that I was not using the latest version. Download and install led and everything seems to work normally except that I still have a message on my Firefox home page telling me that I'm not using the latest version. If, on the other hand, I navigate to 'Firefox' - 'help' - "On Firefox" I tells me that I'm running Firefox 8.0.1 and "Firefox is updated.

  You can see this message under the Google search box on www.google.com/firefox which is the old default Firefox homepage. It seems that this page is no longer maintained. You seem to have Firefox installed with the latest version 8.0.1.

  If you want to than the Google search page as homepage, change your homepage to Subject: House (a new update version is now integrated into Firefox).

  • See-> http://support.mozilla.com/en-US/kb/How+to+set+the+home+page

  Also see-> https://support.mozilla.com/en-US/kb/Finding+your+Firefox+version
  
  You can also see your version on the help > troubleshooting information display

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin

  * Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox

  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• Slow down the first print Page

  HP Officejet 5610 all-in-One printer;  Win 7 Home Premium 64-bit

  When I print multiple-page documents in a project framework, the first page of the printer is very slow, 60 sec. +.  The following pages are at a speed I know is a parameter "print project.

  Why is the first page so slow and others very fast?

  Thank you

  The document should load into memory embedded printer, and the setting of your printers 'printing spool ".

• ValueChangeListner do not get fired when I entered the same value after you remove the first.

  Hello world

  Can anyone help on this.

  JDeveloper version 11.1.1.7

  I use '< af:inputText >' with valueCaangeListner.

  Here as soon as I entered a value, valueChangeListener get fired...

  Problem:

  When I remove the and I entered the same gain value in the text entry box, ValueChangeListner do not get fired.

  When I came again, a value different valueChangelistner get me fired.

  Kind regards

  Malenfant.

  What you say is logic and sense, you enter 500 then delete 00 then add 00 in inputText perspective there is no change in place, therefore, the converter does not occur because there is no changes occur.

  To do something like that you can do a work around using javascript. You can follow these steps:

  1. Select af:inputText and bind it to the backbean

  2 - Add clientListener and serverListener inside inputText as:

  3 - Add handelEnterButton as javascript method:

  function handelEnterButton(event)
  {
    var code=event.getKeyCode();
    if (code==13)
    {
       var source = event.getSource();
       AdfCustomEvent.queue(source,"serverListenerOperations", {}, false);
    }
  }
  

  4. in the method of serverListener back bean refresh as inputText component:

    public void serverListener(ClientEvent clientEvent)
    {
      RequestContext.getCurrentInstance().addPartialTarget(getMyInputTextComponent());
    }
  

  5. now, try to change something in the inputText and then press enter