BUG: Stop asking me what program I want to use it to open images in Windows 10

Similar Questions

• I get the message asking me what program I want to use to open the program

  When I'm online and I try to change the programs, such as clicking 'send' or any change of clock, I will get a window with about 6 choices that says: "what program you want to use to open this program" no matter which one I try, I got nowhere. This all started 4 months ago. How can I get rid of this nuisance.

  Thanks, Dan

  Hello

  (1) do you have made no changes before this problem?

  (2) what operating system do you use?

  Method 1:

  Step 1: I suggest you perform a clean boot before run us the fix it.

  Clean boot

  How to set up Windows 7 to start in a "clean boot" State

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 2: Cannot open. EXE in Windows 7 or Windows Vista http://support.microsoft.com/kb/2688326 files

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 2:

  Step 1: Run the antivirus in safe mode

  Please follow the link on how to start the computer in safe mode with network below.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Microsoft Safety Scanner

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Let us know the results.

• Whenever I go to open a program, I get a window asking you what program I want to use to open this file.

  I don't know it's just a setting that needs to be changed back (Famicom)

  Click Start, run and type Command.com
  Type "c:\windows\regedit.exe"

  Fix association .exe here:
  HKEY_CLASSES_ROOT\.exe
  Exefile (by default)

  Goto:
  HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command
  The (default) value the following * exactly as shown below *.

  "%1" %*

  Close Regedit.exe

  Article number: 555067 - cannot open EXE files
  http://support.Microsoft.com/kb/555067
  
  Let us know if that helps.

  Marilyn

• When I try to open Outlook Express, I get a message asking me what program I want to open it.

  original title: Outlook Express does not open

  When I try to open Outlook Express a box opens and asks me what program I want
  to use to open it. None doesn't seem to work.

  Start here.

  When OE crashes or won't start
  http://www.insideoe.com/problems/errors.htm#crash

• When I try to run the program already installed files (including volume control), the system always ask what program I want to use to run it.

  I recently installed a new antivirus protection software, now at any time, I try to run a program he's asking me what program I want to use to run it, even for already installed programs. For IE, firefox, etc, it's simple, but when I try to adjust the volume of the system through Control Panel he asks me what program I want to use it to run only and I can not. Any ideas how to solve this problem?

  Look at the article on execution of .exe files.

  Article number: 950505 - when you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program
  http://support.Microsoft.com/kb/950505

  You can make the default program using set Associations.
  1. open default programs by clicking the Start button, click default programs.
  2. click on associate a type of file or Protocol with a program.
  3. click on the file type or protocol that you want the program to act as the default value. (In this case it will be for .exe files).
  4. click on the change agenda.
  5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs.
  6. (if you don't see other programs or your program is not listed, click Browse to find the program you want to use, and then click Open. If no other programs are installed that are able to open the type of file or Protocol, your choice will be limited.)
  7. click on OK.

  You can also look at the information here: restore the .exe Windows Vista file association, after badly with another application
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Thank you

  Marilyn

• Why is - each program with which I try to open asking me what program I want to open it.

  Why is - each program with which I try to open asking me what program I want to open it. He just started asking me one day when he didn't have the day before, but if I make a shortcut that I can open the program, well to do anything said program needs a program to open it.

  Hello

  Use above message for intense and thorough check for malware.

  To restore the ability to run any .exe programs.

  1 make a Restore Point so that you can come back if necessary back although probably not required.

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  2. copy BETWEEN these lines and paste it into Notepad - save as exefileFix.reg - then right
  Click on it and FUSION - REBOOT

  DO NOT COPY THE LINES
  -----------------------------------------------------------------

  Windows Registry Editor Version 5.00

  [HKEY_CLASSES_ROOT\. [EXE]
  @= "exefile".
  "Content Type"="application/x-msdownload".

  [HKEY_CLASSES_ROOT\. EXE\PersistentHandler]
  @= "{098f2470-bae0-11cd-b579-08002b30bfeb}".

  [HKEY_CLASSES_ROOT\exefile]
  @= "Application".
  "EditFlags" = hex: 38, 07, 00, 00
  "FriendlyTypeName" = hex (2): 40, 00, 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52,------.
  00, 6f, 00, 6f, 00, 74, 00, 25, 00, 5 c, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 33, 00,------.
  32,00, 5 c, 00, 73, 00, 68, 00, 65, 00, 6 c, 00, 6 c, 00, 33, 00, 32, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c,
  00, 2 c, 00, 2d, 00, 31, 00, 30, 00, 00, 31, 35, 00, 36, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\DefaultIcon]
  @="%1"

  [HKEY_CLASSES_ROOT\exefile\shell]

  [HKEY_CLASSES_ROOT\exefile\shell\open]
  "EditFlags" = hex: 00, 00, 00, 00

  [HKEY_CLASSES_ROOT\exefile\shell\open\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shell\runas]

  [HKEY_CLASSES_ROOT\exefile\shell\runas\command]
  @="\"%1\" %*"
  ""IsolatedCommand"="\"%1\" %. "

  [HKEY_CLASSES_ROOT\exefile\shellex]

  [HKEY_CLASSES_ROOT\exefile\shellex\DropHandler]
  @= "{86C86720-42A0-1069-A2E8-08002B30309D}".

  [- HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.exe\UserChoice]

  --------------------------------------------------------------
  DO NOT COPY THE LINES

  If necessary:

  Check the fix of exe here
  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html

  Also check this one if it applies
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  I hope this helps.

• Whenever I try to open a file that I have to choose what program I want to use to open it with

  origintal title: open with

  Whenever I try to open a file that I have to choose what program I want to use to open it with, is there a way to stop this?

  Whenever I try to open a file that I have to choose what program I want to use to open it with, is there a way to stop this?

  Use this link, go to the answer given by Phantom 010
  http://forums.techguy.org/Windows-Vista/899995-solved-Open-box-opens-every.html

  t-4-2

• Error "windows cannot open this file. to open this file, windows needs to know what program you want to use to open it"appears just after the start on its own.

  After that I typed my password at startup, windows can not open this file. to open this file, windows needs to know what program you want to use to open it.  At this point, I have no one based on nothing and and messages appear literally on its own. I think it's done my computer very slow also.

  What can I do to fix this?

  It's a site file

  Hi Jose7777777,

  • What version of Windows are you using?
  • How long have you been faced with this problem?
  • Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Step 1: Start in safe mode and check if the problem persists.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  You can also view the startup folder.

  I hope this helps.

• I installed the mappoint trial 2013 and he says that it is 100% complete, but asks me what program I want to open it with. Can anyone help?

  He did not a regular download. He asks me what program to use to open and all the options it gives me do not work

  Hello

  Check with the help of MapPoint and in the MapPoint Forums.

  Highway, Streets & Trips, MapPoint - Forum
  http://social.Microsoft.com/forums/is/streetsandtrips/threads

  MapPoiint - Support
  http://www.Microsoft.com/MapPoint/en-us/support.aspx

  Support for MapPoint, streets & trips and Highway
  http://support.Microsoft.com/ph/851

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Almost every program I try to run asks me what program I want to open it with. Internet Explorer files using a calculator.

  So yes, as the title says, I can't any program to be run, I can't even look at my system to try to update the driver. I tried to download some programs to solve this problem of diver updates to the registry scan fix everything on the windows site and I'll try to run the program, but still he asks me what I want to open the program with. Internet Explorer is just about the only program I can get it to work. I can't even program my system restore to run, that asking too me to choose a program I want to open the file with. I don't know what to do. I was able to run my Norton Virus scans, analyses of registry, anything and everything that Norton 360 can do, I did it and nothing works. So please if you have any solution send them my way!

  So yes, I could find a site that fixed my problems that it was. http://www.dougknox.com/XP/file_assoc.htm

  so if someone else is having the same problems I was, go to this link and find the fix .exe and BOOM you guessed it.

• When I try to open a program, a box appears asking what program I want to use to open the file. Even when I try to open Internet Explorer.Any idea that would entail, and how to fix it?

  If I click with the right button on a program, and then click Run as and uncheck the protect my computer box that open programs very well.

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• Shortcuts to programs, EXE files does not open (you will be asked which program I want to use to open the file)

  My system has developed a strange (and annoying) issue that no longer allows me to double click on the shortcuts of programs or EXE files.  When I do, I give myself a menu asks me what program I want to use to open the file, as if I was trying to open a file with an extension that is not associated with.

  The only way to get all the programs to run more is to right click on the shortcut and select "Run as Administrator".

  Right click on the shortcut also reveals a new 'momentum' (Yes, spelled with one S tiny) option in the menu.  I have not tried it works, in my view, it could be related to some false recently-removed security software that appeared out of nowhere last night.

  Any help to remedy this situation and get back to normal functionality would be greatly appreciated.  Thanks in advance.

  If program shortcuts are not no longer works, you will need to use a procedure special difficulty fo files .lnk (similar to the one used above with .exe files).

  Go to http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and select the .lnk and run it.  That should fix your shortcuts.  Or you can use the link provided above by Michael Murphy - it does essentially the same thing.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 19.0 FF does not automatically open a .jpg file when I click it. He continues to wonder what pgm I want to use even thow I said to always use an excerpt

  I use the last mac OS on a mac book pro and I installed FF19.0 now when I try to open a .jpg of my group on yahoo, he continues to ask me what program I want to use. I checked the block in order to always use an extract, but no matter what I always ask again and shows the block. Very annoying.

  Hello Ucharlie72c, see corrupt prefs.js file or damagedand check again.

  Thank you

• When I go to open a file a box comes up to choose what program I want to open with.

  When I go to open a file a box comes up to choose what program I want to open with.  At the bottom of this box is a place where I'm supposed to be able to check who always says "use this program to open this file" I can't check this box.  I open office.org and it allows to automatically save in this format.  Microsoft word program has been installed on my computer and he began to do what I said above then my daughter-in-law.  I've since removed the Microsoft Word program, but it continues to make me choose program to open whenever I try to open a document that was created after she comes to settle the Microsoft word porgram.  Now, even if I had clicked on save in openoffice.org, with that I always get this box asking me what program I want to open.  Thank you for your help.  Marilyn.

  I guess the box to "always use the selected program to open this kind of file" is grayed out, and that's why you can not check it out.  Is this correct?  Is this true for the two files that were created in OpenOffice files AND that were created in Microsoft Word (note that created is the same that that edited not)?

  In OpenOffice, make sure that the "automatic file name extension" option is enabled in the file "Save as" dialog box.

  • Click on "My Documents" (or open Windows Explorer and go everywhere where your documents).
  • Click Tools > Folder Options and then click the view tab
  • Scroll down to the bottom of the "Advanced settings" area and make sure that "Hide extensions of known file types" is NOT checked.
  • Click OK

  Find one or more files that is causing problems.  Which file extensions are displayed (3 characters after the dot in the filename) on these files?

• When opening a program, such as system restore, it asks what program you want to open this program with ie adobe, yahoo, internet Explorer

  When you open a program, such as the system restore or turbo tax it always ask what program you want to open this program with a list of options such as the Adobe reader, internet explorer, yahoo Messenger, etc..

  is there any solution for this?

  Hello

  The issue seems to be with the file association so corrupt that I suggest you run the fix it or follow the manual procedure provided in the link below to fix the problem.

  http://support.Microsoft.com/kb/950505