Build error

Similar Questions

• Build error cannot find the distribution under construction

  I had a similar problem like this thread.

  http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2

  My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.

  You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.

  Here's what happens:

  All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).

  When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)

  What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)

  I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.

• Build error when you create the Provisioning package picture

  Hi all

  I'm trying to create a master Windows IOT image by using the tool of IDC (imaging and designer of Configuration).

  I created a package of commissioning and using"customization of the Windows Image" to create a kernel ITO image by specifying the configuration previously created package but still get a build error.

  It looks like a fairly simple process, but repeatedly gives the error below. Also, I have not all USB devices connected to the computer, nor are there insufficient memory problems.

  ERROR

  =====

  Progress of the staging: 75%
  Staging failed to: 75% complete
  UpdateDLL: Measurement of results:
  Staging of total time: seconds = 27 (tickcount = 27235)
  Error: imagery! UpdateImage: Failed call to UpdateDLL::PrepareUpdate with the error code:-2145877241 (0 x 80188307)
  DismountVirtualHardDiskByFileName: disassembly image C:\Users\Shridhar\AppData\Local\Temp\8eceab63e9b746c0a9c65848679d56eb.vhd
  DismountFullFlashImage: [0.219] cleanup of temporary access roads.
  CleanupTemporaryPaths: Cleaning of temporary path C:\Users\Shridhar\AppData\Local\Temp\IMG39F3.tmp\.
  Storage service: disassembly of the image in 0.2 seconds.
  Imaging: See Flash.cbs.log and Flash.csi.log for more details.
  Imaging: Performance results:
  Total running time: 00:00:52.7198674
  Time of image creation: 00:00:00.0642425
  Writing FFU Time: 00:00:00
  Battery storage time: 00:00:17.8667874

  Any help would be greatly appreciated.

  Hello

  Your question is beyond the scope of this community...

  Repost in the TechNet Forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  Or MSDN Forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Upgrade 'Stacked vs. Non-Stack Build' error-

  During the upgrade from Vista to Win7, I am stopped by an "stacked vs. non-Stack build" Error Message... which means this message - means and how to successfully upgrade to Win7?

  For all questions, installation of Windows 7, the Windows 7 Forums are the best place to ask, as they came across these errors before:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• build error of createUser using the c# code sample

  I get the following build error when you use the c# code for the createUser use method example.

  I use VisualStudio2008 and the Blackberry_Admin_API - 5.0 - US.pdf c# code example.

  Build error States:

  Cannot implicitly convert type 'BESAdmin.BASemailExchangeWebService.EnableBlackBerryUserAttributesType' in 'BESAdmin.BASCoreWebService.EnableBlackBerryUserAttributesType' C:\VS2008\BESAdmin\BESAdmin\Form1.cs 76 488 BESAdmin

  The build error is on this part of the code:

  for (int j = 0; j)< attributes.enableblackberryuserattributes.length;="">

  {

  userEnableBBAttributes.enableBlackBerryUserAttributes [j] = attributes.enableBlackBerryUserAttributes [j];

  }

  Everyone has this same problem and found the solution?  It seems that there is something missing or incorrect in the sample code around type conversion between the EnableBlackberryAttributesType.

  Thank you, Ed

  Hi Ed,

  I tried throwing the code example in a project already created the mine and has not known this error at compile. The two types of objects must be the same, so I don't know why there is no conflict with assignment.

  Please try to use the sample code to create a user from the BAA API reference documents:

  http://www.BlackBerry.com/developers/docs/BAA/5.0.0/

  Or the Knowledge Base of the developer section:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/1608023/How_To_-_Get _...

  It can also be a good idea to recreate your proxy to do this.

  Let us know if the problem is still evident with the examples above.

• chronic build error

  Since today, I get a build error in all of my projects:

  Error occurred during the build.

  Errors under builder "App descriptor Validator" of the project "MNKit".

  java.lang.NullPointerException

  Google gives no guidance on this. Restarting Momentics, or clean up projects does not help.

  At the opening of bar - descriptor.xml, I get:

  java.lang.NullPointerException
  to com.qnx.tools.bbt.core.signing.BarSignerTool. (BarSignerTool.java:105)
  to com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider$ BBTNativeSDKDescriptor.getBarSigner (BBTNativeSDKProvider.java:172)
  at com.qnx.tools.bbt.core.sdk.AbstractBlackBerryTabletSDKDescriptor.getValidator(AbstractBlackBerryTabletSDKDescriptor.java:122)
  at com.qnx.tools.ide.bbt.internal.core.BBTNativeSDKProvider.getValidSDKs(BBTNativeSDKProvider.java:97)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.collectValidSDKs (IBlackBerryTabletSDKDescriptor.java:327)
  to com.qnx.tools.bbt.core.sdk.IBlackBerryTabletSDKDescriptor$ IRegistry$ Impl.getValidSDKs (IBlackBerryTabletSDKDescriptor.java:311)
  at com.qnx.tools.bbt.internal.core.utils.BlackberryTabletSDKUtils.getAvailableTargetPlatformVersions(BlackberryTabletSDKUtils.java:130)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart.getAvailablePlatformVersions(GeneralAdvancedPart.java:146)
  to com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralAdvancedPart. (GeneralAdvancedPart.java:69)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createLeftContent(GeneralPage.java:65)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.GeneralPage.createFormContent(GeneralPage.java:54)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.forms.BBTFormPage.createFormContent(BBTFormPage.java:92)
  to org.eclipse.ui.forms.editor.FormPage$ 1.run(FormPage.java:152)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.forms.editor.FormPage.createPartControl(FormPage.java:150)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:241)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:325)
  at org.eclipse.ui.part.MultiPageEditorPart.addPage(MultiPageEditorPart.java:211)
  at org.eclipse.ui.forms.editor.FormEditor.addPage(FormEditor.java:308)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addBBTPage(BBTXMLEditor.java:233)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.createGeneralPage(BBTXMLEditor.java:240)
  at com.qnx.tools.bbt.xml.internal.ui.editor.bbtxml.BBTXMLEditor.addPages(BBTXMLEditor.java:324)
  at org.eclipse.ui.forms.editor.FormEditor.createPages(FormEditor.java:138)
  at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:348)
  at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:670)
  at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:465)
  at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:595)
  at org.eclipse.ui.internal.EditorReference.getEditor(EditorReference.java:289)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditorBatched(WorkbenchPage.java:2945)
  at org.eclipse.ui.internal.WorkbenchPage.busyOpenEditor(WorkbenchPage.java:2850)
  to org.eclipse.ui.internal.WorkbenchPage.access$ 11 (WorkbenchPage.java:2842)
  to org.eclipse.ui.internal.WorkbenchPage$ 10.run(WorkbenchPage.java:2793)
  at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:70)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2789)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2773)
  at org.eclipse.ui.internal.WorkbenchPage.openEditor(WorkbenchPage.java:2764)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:651)
  at org.eclipse.ui.ide.IDE.openEditor(IDE.java:610)
  at org.eclipse.ui.actions.OpenFileAction.openFile(OpenFileAction.java:99)
  at org.eclipse.ui.actions.OpenSystemEditorAction.run(OpenSystemEditorAction.java:99)
  at org.eclipse.ui.actions.RetargetAction.run(RetargetAction.java:221)
  to org.eclipse.ui.navigator.CommonNavigatorManager$ 3.open(CommonNavigatorManager.java:185)
  to org.eclipse.ui.OpenAndLinkWithEditorHelper$ InternalListener.open (OpenAndLinkWithEditorHelper.java:48)
  to org.eclipse.jface.viewers.StructuredViewer$ 2.run(StructuredViewer.java:866)
  at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
  to org.eclipse.ui.internal.JFaceUtil$ 1.run(JFaceUtil.java:49)
  at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175)
  at org.eclipse.jface.viewers.StructuredViewer.fireOpen(StructuredViewer.java:864)
  at org.eclipse.jface.viewers.StructuredViewer.handleOpen(StructuredViewer.java:1152)
  at org.eclipse.ui.navigator.CommonViewer.handleOpen(CommonViewer.java:462)
  to org.eclipse.jface.viewers.StructuredViewer$ 6.handleOpen(StructuredViewer.java:1256)
  at org.eclipse.jface.util.OpenStrategy.fireOpenEvent(OpenStrategy.java:275)
  to org.eclipse.jface.util.OpenStrategy.access$ 2 (OpenStrategy.java:269)
  to org.eclipse.jface.util.OpenStrategy$ 1.handleEvent(OpenStrategy.java:309)
  at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)
  at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480)
  at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465)
  at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270)
  at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974)
  at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3613)
  at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701)
  at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665)
  to org.eclipse.ui.internal.Workbench.access$ 4 (Workbench.java:2499)
  to org.eclipse.ui.internal.Workbench$ 7.run(Workbench.java:679)
  at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332)
  at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668)
  at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)
  at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123)
  at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
  at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344)
  at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622)
  at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577)
  at org.eclipse.equinox.launcher.Main.run(Main.java:1410)

  I am running on a Mac with the new Oracle Java 1.6.0.37 Mountain Lion.

  solved.

  Re-install Momentics and the simutaor is done.

• Build error on request requestExit

  I encountered a strange problem to call the requestExit API. Compiles normal but generation has an error.

  undefined reference to the symbol "_ZN2bb11Application11requestExitEv".

  Note: '_ZN2bb11Application11requestExitEv' is defined in DSO C:/bbndk/target_10_0_9_2318/qnx6/armle-v7/usr/lib/libbb.so.1 try so add to the linker command line

  could not read symbols: invalid operation

  My source code is as below

  Cpp:
  
  MyApplication::MyApplication(bb::cascades::Application *app)
  : app(app)
  
  app->requestExit(); //Application::instance()->requestExit(); build error also
  
  bar-descriptor.xml
  
  
  .pro
  LIBS += -lbbsystem -lbbnetwork -lbbplatform -lscreen -lbbdata -lbbdevice
  

  Which library else I would add to my project?  Thanks for letting me out.

  Hello

  libbb.so East - lbb

• An unexpected build error has occurred: index was outside the bounds of the array

  Hello

  I use OPA version 12.1.1 (November 2015 edition of cloud).

  When I try to debug my OPA project I get this error:

  "An unexpected build error has occurred: index was outside the bounds of the array.

  Does anyone of you understand what that means?

  Kind regards

  Xavier M.

  What language / region is your project?

  You are able to apply for service with the support of Oracle?  This error usually requires the investigation of the project to determine the root cause.

• MAF: Build Error "adfmf - not found feature.xml.

  Hi all

  Anyone know how to change the ViewController.jpr file?  After the upgrade to the MAF (JDev 12.1.3) and the migration of my existing Mobile ADF codeset, I have a build error: "adfmf - not found feature.xml.  The project is looking for the feature.xml file - adfmf.  However the MAF migration script has renamed this file feature.xml - MAF.

  Can I modify the ViewController.jpr script to look for the new MAF - feature.xml myself?  When I opened the project .jpr file in a text editor I don't find any reference to the MAF - feature.xml or adfmf - feature.xml.

  Thanks for the tips,

  TreeStrepek

  * Note: I initially thought that rename the MAF - feature.xml to adfmf - feature.xml solve the problem temporarily.  However, after that I get an error of deployment "doesn't have the profile to deploy, because the 'ViewController.jpr' project is not a MAF ApplicationController or ViewController project.» (oracle.adfmf.framework.dt.features.deployers.FeatureArchiveDeployer)

  I think it was a side effect of the original version of the MAF, which turned out to be unstable.  This has been corrected in the patch below MAF.

  Mobile application framework JDeveloper Patch

  2.0.0.0.41.140623.0901

  Patch 18030351 - patches the main components of JDeveloper required for Mobile Application Framework (MAF).

• Build PhoneGap service "build error.

  I can't with Dreamweaver CC and PhoneGap Service of Build. I get "build error" and when I click on the button 'show' he says: "unable to download the application. (I build for Android only.) And build.phonegap.com my application name changed to 'PhoneGap Build Project' why? He had the good name before... And said the version 1.0.0 which is also wrong. The app ID is: 819335

  Hi Moki,

  Could you please download the zip file of the project on build.phonegap.com and build and tell me if you are faced with the same question.

  This could help solve your problem.

  Thank you

  Confidante

• Ant with WebLogic 10.3 build error

  Hello
  
  I'm trying to compile the web service example in the tutorial
  
  http://download.Oracle.com/docs/CD/E12840_01/WLS/docs103/webserv/use_cases.html#wp228687
  
  Use case # 1
  
  And I get this error when you try the command "> ant-build service:
  >
  D:\myExamples\hello_world\src > ant build_service
  BuildFile: D:\myExamples\hello_world\src\build.xml
  
  BUILD FAILED
  D:\myExamples\hello_world\src\build.XML:4: taskdef class weblogic.wsee.tools.anttasks.JwscTask is not found
  by using the [AntClassLoader] class loader
  
  Total time: 0 seconds
  
  
  At this point in the tutorial, the build.xml file contains:
  >
  < name of project = 'webservices-hello_world"default ="all">
  
  < taskdef = "jwsc" name
  ClassName = "WebLogic.WSEE.Tools.anttasks.JwscTask" / > "
  
  < name target = "build-service" >
  
  < jwsc
  srcdir = "src".
  DESTDIR = "production/helloWorldEar" >
  
  "< file="examples/webservices/hello_world/HelloWorldImpK.java TJ.
  Type = "JAXWS" / >
  
  < / jwsc >
  
  < / target >
  < / project >
  
  
  I wonder if I need to set a variable in the environment?
  
  I know that my Ant installation is good since I managed to compile and run a java program with a manifesto in the jar.
  
  Thanks a lot for your help.

  chk this
  Re: build errors using Ant

  1. If you are working from the user_projects directory, add the following to the Properties section of the generation xml "". "" Other wise, set the value the full path of the directory on the server wlserver_10.3 lib directory.

  2. in each taskdef element, add the following child element
  
  
  
  
  
  
  
  
  3. Save and run the ant task in your project directory.

• An internal build error has occurred. Click for more information.

  An internal build error has occurred. Click for more information.

  You have a question?

• An internal build error has occurred.  Check the error log. ?

  I get this message in Flex 2.0 "an internal build error has occurred. Please check the error log. "Does anyone know how to fix this?

  I was getting this error because I had one this line of code
  var temp: XML = ;

  in any case... my bad... If the compiler sees something really wrong with your code he goes into panic mode and doesn't show you any errors... :) Gotta make sure that your code is valid...

• An internal build error has occurred.  Please check the error log.

  All of a sudden today while working on a project, I got this error message in the issues window:
  
  "An internal build error has occurred. Please check the error log. »
  
  The background in the my application has been configured for white, now even that returns to the default gray
  
  Any help would be appreciated. The file of the only error I can find at the root of FlexBuilders is called hs_err_pid3140
  
  Thank you

  After a few hours of searching, I found a forum with a lot of these questions. I'm posting the links here just in case someone else has the same problem.

  Basically, it's a bug, and nobody really knows what the exact correction is... but some of the solutions have worked. For me, I copied my project files in a backup folder. Delete the project. Created a new project and copied the files back.

  http://tech.groups.Yahoo.com/group/flexcoders/message/69312

  http://tech.groups.Yahoo.com/group/flexcoders/message/68604

  http://tech.groups.Yahoo.com/group/flexcoders/message/62112

  http://tech.groups.Yahoo.com/group/flexcoders/message/61840

  http://tech.groups.Yahoo.com/group/flexcoders/message/57573

  http://tech.groups.Yahoo.com/group/flexcoders/message/51696

  http://tech.groups.Yahoo.com/group/flexcoders/message/41079

• Program of build error

  I'm doing payment batch Release 12 via a payment Manager.
  
  The Bill who are chosen by the payment request process belong to 2 operating units. The problem with do build on wrong progam.
  
  The output file shows the following message:
  "Program of build error: Exception occurred trying to create payments to pay documents of the application for payment service provided."
  
  The log file is the following:
  
  ---------------------------------------------------------------------------
  Payments: Version: 12.0.0
  
  Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
  
  Module IBYBUILD: build payments
  ---------------------------------------------------------------------------
  
  Current system time is June 22, 2009 15:08:50
  
  ---------------------------------------------------------------------------
  
  * Starts * June 22, 2009 15:08:50
  * Ends * June 22, 2009 15:09:08
  CREATE PROGRAM ERROR - CANNOT CREATE PAYMENTS
  ---------------------------------------------------------------------------
  Beginning of the FND_FILE log messages
  ---------------------------------------------------------------------------
  ---------------------------------------------------------------------------
  End of the FND_FILE log messages
  ---------------------------------------------------------------------------
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is June 22, 2009 15:09:09
  
  
  Could someone please provide a solution for this.
  
  You can email me at [email protected]

  Hello

  Please refer to this document.

  Note: 558114.1 - R12: build the program ends with the error after examining the RUP4 invoices
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=558114.1

  Kind regards
  Hussein

• LV 2009 SP1 Build error OR

  While trying to do a build on LV 2009 SP1, I get this error:

  The build failed.

  An error occurred during the recording of the following file: Sample.VI

  Details:

  Visit ni.com/ask support request page to learn more about the resolution of this problem. Use them following as a reference: 1 error this is produced to AB_Source_VI.lvclass:Close_Reference.vi-> AB_Build.lvclass:Copy_Files.vi-> AB_Application.lvclass:Copy_Files.vi-> AB_EXE.lvclass:Copy_Files.vi-> AB_Build.lvclass:Build.vi-> AB_Application.lvclass:Build.vi-> AB_EXE.lvclass:Build.vi-> AB_Engine_Build.vi-> AB_Build_Invoke.vi-> AB_Build_Invoke.vi.ProxyCaller

  Possible reasons: LabVIEW: an input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @. = OR-488: command requires GPIB controller charge controller.

  Note that I do not use any GPIB. Also when I build the project NAV 2009 (without SP1) on another computer, I get no error. Any ideas?

  An Application (EXE). Now what I've done is removed the previous generation in the project framework > My Computer > specifications build and created a new Build > Application (EXE). And he built successfully!

  Now, of course was was wrong the first time... but it works now. Thank you!