build the problem of waveform
Hello
I have a difficulty with the vi LabVIEW "waveform of the generation" I wired all the entries on the vi: dt, t0 and there, I have a correct timestamp, but when he connects, my wave repeat myself it is 01/01/1904?
I tried my timestamp on the example vi: create the sample waveform, and here it works? I don't understand? What I am doing wrong?
In the room attached my vi
Best regards
Thijs Boeree
I don't see your problem. If I enter a time stamp valid in your header BDF, then run your code, I get the same timestamp in the waveform. More specifically, where is your problem?
Tags: NI Software
Similar Questions
-
Problems with secondary after building the application .exe
Hi people,
as I like am a self taught Newbie on LV and TestStand I have some problems with the construction of an exe file.
I don't know if it is a question of LabVIEW and TestStand, so I posted this question in the two Forums.
I use the interface simple chart that came with Teststand and added a secondary. TestStand is supposed to open the called VIs dynamically in this secondary.
I used the code from the tutorial respective http://zone.ni.com/devzone/cda/epd/p/id/6278
Everything works fine until I build the application. The screws are then open in pop-up windows clean AND in high school, but only the popup version is usable.
I hope that I am too dumb to find the answer and that there will be a quick solution.
If you have built the exe in LabVIEW 2009 selected in the configuration of your adapter TestStand and LabVIEW 2009 and your screws have been opened and saved in 2009 LV?
-
build the CAP problem - how do you do an automated build?
I'm starting my first BB development industrial project. I have a prototype that works in the Eclipse IDE plugin and in the Simulator.
I am using: BB JDE Eclipse Plug - in component Pack 4.5.0 and java 1.6.0_11.
The problem is I am putting in place a system of incremental generation and automatic using bb-ant-tools, and in this environment, I get the following error of Cap:
[Cap] java.lang.Object: WARNING! No definition not found for the method: clone
I also tried with the BB JDE environment 4.5.0, after noticing that the net_rim_api.jar files are different between the JDE and the plug-in. But it has not made a difference.
I then confirmed that the object in net_rim_api.jar class ISN'T the clone() method. Clone() is part of J2SE 1.5 specification and would therefore be in libraries that are part of the java JDK 1.6.
Then, I confirmed, looking at the newspapers of generation, that all the files have been loaded the BB net_rim_api.jar or from one of my source files.
Then. 2 questions:
1. a reflection as to why clone() is not found?
2. What is the way to recommend to set up an automated build system?
Thanks in advance!
I solved the problem.
Buried down in one of my source files was a call to clone(), who is not in the class of object included in net_rim_api.jar.
After the removal of these calls the application compiles, loads and works on a phone very well.
I highly recommend bb-and-tools, available on source forge, automated builds!
-
Eclipse plugin Web build and run the problem
Hello
I downloaded the plugin Web BlackBerry for Eclipse v2.0 Beta 1 with Eclipse 3.4
When I choose Run as-> BlackBerry Widget and the execution of construction process never ends. I get a message in the saying of the console
******************************
BUILDING BasicWidget
cmd.exe /c bbwp D:\Projects\eclipseworkspace\BasicWidget\build\BasicWidget.zip/o D:/projects/eclipseworkspace/BasicWidget/construction
When I click the progress tab, I can see the State as 'Sites Widget' guard goin on and on.
I checked in the Task Manager, I see cmd.exe and bbwp.exe still alive and never leave, can suggest me what would be the problem?
I tried to manually run the D:\eclipse\plugins\net.rim.browser.tools.wcpc_1.0.0.200910291414-35\wcpc\bbwp.exe, get "Exception in thread"main"java.lang.UnsupportedClassVersionError: Bad version in .class file number '.
Java version "1.6.0_11.
Java (TM) SE Runtime Environment (build 1.6.0_11 - b03)
Java Client VM (build 11, 0 - b16, mixed mode)Windows XP SP3 32-bit
Kind regards
Arun
I guess that the bbwp.exe that calls the bbwp.jar was compiled in a latest version of java.
Java 1.6.0 update 11 doesnot work.
I tried the update of java 1.6.0 17, all right.
RIM just needs to update their http://na.blackberry.com/eng/developers/devbetasoftware/eclipseplugin.jsp requirements from (SUN JDK 1.6 or higher) update (SUN JDK 1.6 XX or higher)
-
Build ok but then export the problem. systemCmdWaitTime has no effect...
Hello together,
When I build a virtual machine sometimes (and now very often) a version works well on the supply system but of cannot be exported from the system of supply to the Studio...
Studio: v2.1
Transfer system: ESXi 4.0
Model: generation based on "/ opt/vmware/etc/build/templates/ubuntu/08/044/build_profile.xml".
Debug.log error:
0/08/2010 16:18:40 [info] Installation finished. 10/08/2010 16:18:40 [info] Checking for post-OS installation error ... 10/08/2010 16:19:16 [info] Transporting VM from provisioning host to Studio; this may take a few minutes... 10/08/2010 16:20:14 [warn] Failed to see password prompt for: </opt/vmware/share/ovftool/ovftool '--name=1.1.1.1_myVM-v2_.79' '--targetType=vmx' '--diskMode=twoGbMaxExtentSparse' 'vi://usernam@ESX-hostname:443/1.1.1.1_myVM-v2_.79/' '/opt/vmware/www/build/myVM-v2_.79/va'>. 10/08/2010 16:20:14 [info] Try increasing vadk:systemCmdWaitTime (currently set to <30> secs) in the profile. 10/08/2010 16:20:32 [warn] VM transporting failed! Error: 10/08/2010 16:20:32 [warn] 10/08/2010 16:20:32 [error] Encountered a fatal build error!
The problem is that I have increased the vadk:systemCmdWaitTime in my profile (/ opt/vmware/var/lib/build/profiles/myVM-v2.xml) to 60 seconds
but the error message is always the same. Of course the build process ignores my setting...: o (())
When I run the command above, then the first time, it takes a long time until I can see the prompt. On the second try, he'll
fast (less than 5 seconds) until the PW prompt appears.
* Question to determine that the good sense: *.
ESX server have a response time of bad but why? ESX server do nothing else that commissioning and I can't
See all problems in newspapers ESX...
* Question how fix (workaround): *.
What will do about the systemCmdWaitTime really?
No help for one or the other question suggested!
Thank you
Thomas
In with regards to the vadk:systemCmdWaitTime being ignored, it's unfortunately a bug that you can apply the following fix:
/opt/VMware/lib/build/VADK/ProvInterface/Vim.pm
my ($retStatus, $cmdStdout, $pid, $retExpObj, $savedHdl)
= VADK::System:systemCmdWithPw($cmdStr,_$self->{&K_PROVPASSWORD},_$ovftool_exitfile,_1);
My $sysSettings = $self-> getSysSettings();
my ($retStatus, $cmdStdout, $pid, $retExpObj, $savedHdl) =.
() VADK::System:systemCmdWithPw
$cmdStr,
$self-> {& K_PROVPASSWORD},
$ovftool_exitfile,.
1,
$sysSettings-> {& VADK: constants: K_SYSCMDWAITTIME},
$sysSettings-> {& VADK: constants: K_SYSCMDMAXTIME});
- and -
my ($retCmd, $cmdStdout, $pid, $expISO, $childHdlISO) = VADK::System:systemCmdWithPw ($cmdConnISO, $pw, $exitIso, 0);
my ($retCmd, $cmdStdout, $pid, $expISO, $childHdlISO) =.
VADK::System:systemCmdWithPw ($cmdConnISO, $pw, $exitIso, 0,
$sysSettings-> {& VADK: constants: K_SYSCMDWAITTIME},
$sysSettings-> {& VADK: constants: K_SYSCMDMAXTIME});
In regards to the ESX with wrong answer while proceeding not a high load, maybe you could consider restart the ESX management agent to clear of maybe a bad state: http://vmwaretips.com/wp/2008/12/12/restarting-the-management-agents-on-an-esx-server/
-
Push the Plugin problem while that build the app
I get the following error when I build the app for ios. What is surprising is that the android app sits perfectly with the same configuration.
"Error - the following 3rd-party plugin causes the generation fails and may need to be updated to a newer version: com.phonegap.plugins.PushPlugin.
Help!
Hi shauryag26424738, this plugin is now obsolete. Try to use the last being: phonegap-plugin-push.
Include in your file as config.xml:
-
How to solve the problem of app activate in DPS App Builder?
I have no applications appear in the download section of the DPS App Builder.
And on the section status App, I'm being invited to activate app?
Can anyone help please?
1. delete the current DPS App Builder application - if you do not have an option to remove the Build, send your DPS Builder App ID by sending a private message (click on my name and click on send a message private to the right).
2. go to Applications, find DPS App Builder and move it to the trash.
3. go to https://digitalpublishing.acrobat.com/welcome.html, sign in, and then click DPS APP Builder. This will give you a command prompt to install the DPS App generator.
4. download and install DPS App Builder.
5. go to InDesign > Folio of Builder Panel, connect with the creative id Cloud and click Create App.
6. sign in to DPS App Builder and build the application.
7. you should be able to create and download the files Developer.ipa and Distribution.zip.
-
Police & box alignment in the building shape problems
Hello
I'm trying to update our application page but I did not originally create the page and I have very little experience with Forms.
I need help is:
(1) how can I increase the font size for all field names thoughout the form for example, first name, middle name etc., House #, suburb/State, current employer etc etc?
(2) certain display fields offline with one of the other example 'status Martial' and ' # of dependants ', 'Years' and 'months '. These fields are aligned in DW, but obviously are not correctly - how can I fix?
These issues seem to occur only in Internet Explorer - I am currently using IE8 and I don't suppose that the problems will be the same in previous versions, if not worse.
The link for the form is: http://www.lombardfinance.com.au/dev/card_newsite.html
If anyone can help me it would be much appreciated!
Thank you!
(1) how can I increase the font size for all field names thoughout the form for example, first name, middle name etc., House #, suburb/State, current employer etc etc?
Why do you have a tag content of the tag of each
-
dispplaying data on the graph of waveform inside/outside while loop
I create a vi using the random number generator, entering the number in the function(express>>arithmateic>>maths>>trig>>sine) fishing and connect the output of the function sine waveforms. Table of waveform show no problem. If I replace the with graphic waveform table, I get an error that the source type is differenct type of sink. I then put waveform chart outside loop everything hoping that tunnel would act as a table, but still I get the same error. I then put build table palette between all border and loop waveform graph which is placed outside the while loop. I get no error, but no data is displayed on the graph of a waveform. Theoretically, if I press stop I would see a distorted sine wave on the waveform graph, but this doesn't seem to be the case. I am wondering how to view data on the graph of a waveform in such cases!
Thank you in advance for reading and help!
See you soon
First of all, you can take a part of the basis of LabVIEW tutorials.
Since you need to work with a chart and it is the preferred method to display data point by point, I don't know why you try to use a chart. In any case, you cannot use all simply a table of generation because that would be just the result of the last iteration and your graph indicates it is a single point. If you activate autoindexing, then you get all the values, but not before the end of the loop. If you were to use a shift register and the build dashboard, you might place the graphic inside the loop, but then you would face performance issues that the table would grow uncontrollably.
-
How to create the type of waveform data
Hello
I work with the oscilloscope TDS 30xx series and I want to create the data type of waveform in the waveform of Fetch VI.
I have problems with that. Can someone help me?
I don't know how to data table of waveform to the creation of a data type.
Is attached a photo of the VI and the VI himself
Well, if you want to build a waveform of Y, dT and T0, you can still use the function named "build the waveform.
-
What is the problem with my Mini?
DWB (level 7) asked me to start a new thread, so this is. the predecessor of the long and interesting is to
Re: Mac Mini Late 2014 vs SSD Ram
Yes, dwb, I downloaded EtreCheck and run twice, choosing the first "slow computer', then 'Applications crashing' the second time.
In this post, I will paste the results. Note that I clicked and clicked check boxes in the space of options for all non-hidden results. This, apparently, makes the longer and more complex answer, but as I said in the other post, I tried to improve my Mini for years, so I didn't want to leave anything to chance.
I'll stick the newspaper 'Applications Crash' in the next post, if it is not apocalyptic long...
EtreCheck version: 2.9.9 (260)
Report generated 2016-03-08 13:28:41
Download EtreCheck from https://etrecheck.com
Time 02:56
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Verify the signatures of Apple: enabled
Ignore the known failures of Apple: disabled
Hide tasks Apple: disabled
Problem: Computer is too slow
Description:
Long description to https://discussions.apple.com/message/29891737?ac_cid=tw123456#29891737
Mac mini (late 2012)
[Data sheet] - [User Guide] - [warranty & Service]
Mini Mac - model: Macmini6, 1
1 2.5 GHz Intel Core i5 CPU: 2 strands
16 GB expandable RAM - [Instructions]
BANK 0/DIMM0
OK 8 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 8 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: unknown
Graphics Intel HD 4000
S20D300 1280 x 720
OS X El Capitan 10.11.3 (15 d 21) - since the starting time: 3 hours
HTS545050A7E362 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Korak (disk0s2) /: 499,25 (Go 133,11 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Receiver IR of Apple, Inc..
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Hub keyboard Apple, Inc.
Apple, Inc. Apple Keyboard
HGST G-DRIVE mobile USB 1 TB
EFI (disk1s1) < not mounted >: 210 MB
Rama1 (disk1s2) / Volumes/Rama1: go-go 333,40 (61,07) free
Rama3 (disk1s3) / Volumes/Rama3: 333,40 go-go (218,39 free)
Rama2 (disk1s4) / Volumes/Rama2: 332,79 GB (8.33 GB free)
HOLTEK USB keyboard
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/ Library/Extensions
[loading] com.symantec.internetSecurity.kext (7.0.2f26 - SDK 10.9-2016-02-28) [Support]
/ Library/StartupItems/DoubleCommand
com.baltaks.driver.DoubleCommand [no charge] (1.7 - SDK 10.8 - 2015-01-09) [Support]
/ System/Library/Extensions
[loading] com.symantec.ips.kext (7.0.1f26 - SDK 10.8 - 2016-02-28) [Support]
[loading] com.symantec.nfm.kext (7.0.1f26 - SDK 10.8 - 2016-02-28) [Support]
[no charge] com.wdc.driver.1394.64.10.9 (1.0.1 - SDK 10.9-2016-02-28) [Support]
[no charge] com.wdc.driver.USB.64.10.9 (1.0.1 - SDK 10.9-2016-02-28) [Support]
DoubleCommand: Path: / Library/StartupItems/DoubleCommand
Startup items are obsolete in OS X Yosemite
com.apple.AOSHeartbeat.plist [loading]
com.apple.AOSPushRelay.plist [loading]
com.apple.AddressBook.AssistantService.plist [loading]
com.apple.AddressBook.SourceSync.plist [loading]
com.apple.AddressBook.abd.plist [loading]
[ongoing] com.apple.AirPlayUIAgent.plist
com.apple.AirPortBaseStationAgent.plist [loading]
com.apple.AppleGraphicsWarning.plist [no charge]
com.apple.AskPermissionUI.plist [loading]
com.apple.AssetCacheLocatorService.plist [loading]
com.apple.AssistiveControl.plist [loading]
[ongoing] com.apple.BezelUI.plist
[ongoing] com.apple.CalendarAgent.plist
[ongoing] com.apple.CallHistoryPluginHelper.plist
[ongoing] com.apple.CallHistorySyncHelper.plist
com.apple.CommCenter-[ongoing] osx.plist
com.apple.ContainerRepairAgent.plist [loading]
com.apple.CoreAuthentication.daemon.plist [loading]
com.apple.CoreLocationAgent.plist [loading]
com.apple.CoreRAIDAgent.plist [loading]
com.apple.DiagnosticReportCleanup.plist [loading]
com.apple.DictationIM.plist [loading]
com.apple.DiskArbitrationAgent.plist [loading]
[ongoing] com.apple.Dock.plist
com.apple.EscrowSecurityAlert.plist [loading]
com.apple.FTCleanup.plist [loading]
com.apple.FileStatsAgent.plist [no charge]
com.apple.FileSyncAgent.PHD.plist [loading]
com.apple.FilesystemUI.plist [loading]
[ongoing] com.apple.Finder.plist
[ongoing] com.apple.FolderActionsDispatcher.plist
com.apple.FollowUpUI.plist [loading]
com.apple.FontRegistryUIAgent.plist [loading]
com.apple.FontValidator.plist [loading]
com.apple.FontValidatorConduit.plist [loading]
com.apple.FontWorker.plist [loading]
com.apple.IMLoggingAgent.plist [loading]
[loading] com.apple.MRTa.plist (2015-08-22) -invalid signature!
com.apple.ManagedClientAgent.agent.plist [loading]
com.apple.ManagedClientAgent.enrollagent.plist [no charge]
[ongoing] com.apple.Maps.pushdaemon.plist
com.apple.NetworkDiagnostics.plist [loading]
com.apple.PCIESlotCheck.plist [loading]
com.apple.PackageKit.InstallStatus.plist [loading]
com.apple.PhotoLibraryMigrationUtility.XPC.plist [loading]
com.apple.PubSub.Agent.plist [loading]
[ongoing] com.apple.RemoteDesktop.plist
com.apple.ReportCrash.Self.plist [loading]
com.apple.ReportCrash.plist [loading]
com.apple.ReportGPURestart.plist [no charge]
com.apple.ReportPanic.plist [loading]
com.apple.SSInvitationAgent.plist [loading]
[ongoing] com.apple.Safari.SafeBrowsing.Service.plist
[ongoing] com.apple.SafariCloudHistoryPushAgent.plist
com.apple.SafariNotificationAgent.plist [loading]
com.apple.SafariPlugInUpdateNotifier.plist [loading]
com.apple.ScreenReaderUIServer.plist [loading]
[ongoing] com.apple.SocialPushAgent.plist
[ongoing] com.apple.Spotlight.plist
[ongoing] com.apple.SystemUIServer.plist
com.apple.TMHelperAgent.SetupOffer.plist [loading]
com.apple.TMHelperAgent.plist [loading]
com.apple.TrustEvaluationAgent.plist [loading]
com.apple.USBAgent.plist [loading]
com.apple.UserEventAgent-[ongoing] Aqua.plist
[no charge] com.apple.UserEventAgent - LoginWindow.plist
[no charge] com.apple.UserNotificationCenterAgent - LoginWindow.plist
com.apple.UserNotificationCenterAgent.plist [loading]
[ongoing] com.apple.VoiceOver.plist
com.apple.WebKit.PluginAgent.plist [loading]
com.apple.ZoomWindow.plist [loading]
[ongoing] com.Apple.accountsd.plist
com.Apple.AKD.plist [loading]
com.Apple.Alf.UserAgent.plist [loading]
com.Apple.AOS.migrate.plist [loading]
com.Apple.appleseed.seedusaged.plist [loading]
com.Apple.appsleepd.plist [loading]
com.Apple.appstoreupdateagent.plist [loading]
com.Apple.apsctl.plist [loading]
[ongoing] com.Apple.askpermissiond.plist
com.Apple.assistant_service.plist [loading]
com.Apple.assistantd.plist [loading]
[ongoing] com.Apple.bird.plist
com.apple.bluetoothUIServer.plist [loading]
com.Apple.BTSA.plist [loading]
com.Apple.CDPD.plist [loading]
com.apple.cfnetwork.AuthBrokerAgent.plist [loading]
com.Apple.cfnetwork.cfnetworkagent.plist [loading]
[ongoing] com.Apple.cfprefsd.XPC.agent.plist
[ongoing] com.Apple.cloudd.plist
[loading] com.apple.cloudfamilyrestrictionsd - mac.plist
[ongoing] com.Apple.cloudpaird.plist
[ongoing] com.Apple.cloudphotosd.plist
com.Apple.cmfsyncagent.plist [loading]
com.Apple.CoreData.externalrecordswriter.plist [loading]
[ongoing] com.Apple.CoreServices.appleid.authentication.plist
[ongoing] com.Apple.CoreServices.lsactivity.plist
[ongoing] com.Apple.CoreServices.sharedfilelistd.plist
[ongoing] com.Apple.CoreServices.uiagent.plist
com.Apple.csuseragent.plist [loading]
[ongoing] com.Apple.ctkd.plist
com.apple.cvmsCompAgent3600_i386.plist [loading]
com.apple.cvmsCompAgent3600_i386_1.plist [loading]
com.apple.cvmsCompAgent3600_x86_64.plist [loading]
com.apple.cvmsCompAgent3600_x86_64_1.plist [loading]
com.apple.cvmsCompAgentLegacy_i386.plist [loading]
com.apple.cvmsCompAgentLegacy_i386_1.plist [loading]
com.apple.cvmsCompAgentLegacy_x86_64.plist [loading]
com.apple.cvmsCompAgentLegacy_x86_64_1.plist [loading]
com.apple.cvmsCompAgent_i386.plist [loading]
com.apple.cvmsCompAgent_i386_1.plist [loading]
com.apple.cvmsCompAgent_x86_64.plist [loading]
com.apple.cvmsCompAgent_x86_64_1.plist [loading]
[ongoing] com.Apple.diagnostics_agent.plist
[ongoing] com.Apple.distnoted.XPC.agent.plist
com.apple.dt.CommandLineTools.installondemand.plist [loading]
com.Apple.familycircled.plist [loading]
com.Apple.familycontrols.UserAgent.plist [loading]
com.Apple.familynotificationd.plist [loading]
com.Apple.findmymacmessenger.plist [loading]
com.Apple.followupd.plist [loading]
com.Apple.fontd.UserAgent.plist [loading]
[ongoing] com.Apple.gamed.plist
[ongoing] com.Apple.helpd.plist
com.apple.iCloudUserNotifications.plist [loading]
[ongoing] com.Apple.ICDD.plist
[loading] com.apple.icloud.findmydeviced.findmydevice - user - agent.plist
[ongoing] com.Apple.icloud.fmfd.plist
[ongoing] com.Apple.iconservices.iconservicesagent.plist
[ongoing] com.Apple.identityservicesd.plist
com.Apple.idsremoteurlconnectionagent.plist [loading]
[ongoing] com.Apple.imagent.plist
com.Apple.imavagent.plist [loading]
com.Apple.imklaunchagent.plist [loading]
com.Apple.imtransferagent.plist [loading]
com.Apple.installandsetup.migrationhelper.user.plist [loading]
com.Apple.installd.user.plist [loading]
com.Apple.ISST.plist [loading]
com.apple.java.InstallOnDemand.plist [loading]
com.apple.java.updateSharing.plist [loading]
[ongoing] com.Apple.lateragent.plist
com.Apple.locationmenu.plist [loading]
[ongoing] com.Apple.LSD.plist
[ongoing] com.Apple.maspushagent.plist
com.Apple.mbbackgrounduseragent.plist [loading]
com.Apple.mbfloagent.plist [loading]
com.Apple.mbuseragent.plist [loading]
com.Apple.mdmclient.agent.plist [loading]
com.Apple.mdworker.32bit.plist [loading]
com.Apple.mdworker.bundles.plist [loading]
com.Apple.mdworker.isolation.plist [loading]
com.Apple.mdworker.LSB.plist [loading]
com.Apple.mdworker.mail.plist [loading]
com.Apple.mdworker.shared.plist [loading]
com.Apple.mdworker.single.plist [loading]
[ongoing] com.Apple.mdworker.sizing.plist
[ongoing] com.apple.metadata.SpotlightNetHelper.plist
com.Apple.metadata.mdbulkimport.plist [loading]
[ongoing] com.Apple.metadata.mdflagwriter.plist
com.Apple.metadata.mdwrite.plist [loading]
com.Apple.midiserver.plist [loading]
com.Apple.navd.plist [loading]
com.Apple.neagent.plist [loading]
com.Apple.netauth.user.auth.plist [loading]
com.Apple.netauth.user.GUI.plist [loading]
com.Apple.noticeboard.agent.plist [loading]
[ongoing] com.Apple.notificationcenterui.plist
[ongoing] com.Apple.nsurlsessiond.plist
com.Apple.nsurlstoraged.plist [loading]
com.Apple.parentalcontrols.check.plist [loading]
[ongoing] com.Apple.pboard.plist
[ongoing] com.Apple.PBS.plist
[ongoing] com.Apple.photolibraryd.plist
com.Apple.pictd.plist [loading]
[ongoing] com.Apple.pluginkit.PKD.plist
com.Apple.pluginkit.pkreporter.plist [loading]
com.Apple.powerchime.plist [loading]
[ongoing] com.Apple.printtool.agent.plist
com.Apple.printuitool.agent.plist [loading]
com.Apple.QuickLook.32bit.plist [loading]
com.Apple.QuickLook.config.plist [loading]
com.Apple.QuickLook.plist [loading]
com.Apple.QuickLook.UI.helper.plist [loading]
com.Apple.RCD.plist [loading]
[ongoing] com.Apple.recentsd.plist
[ongoing] com.Apple.reversetemplated.plist
com.Apple.rtcreportingd.plist [loading]
com.Apple.safaridavclient.plist [loading]
[ongoing] com.Apple.scopedbookmarkagent.XPC.plist
com.apple.screensharing.MessagesAgent.plist [loading]
com.Apple.screensharing.agent.plist [loading]
com.Apple.SCROD.plist [loading]
[ongoing] com.Apple.secd.plist
[ongoing] com.Apple.secinitd.plist
com.apple.security.DiskUnmountWatcher.plist [loading]
com.Apple.Security.agent.plist [loading]
[ongoing] com.Apple.Security.cloudkeychainproxy.plist
com.Apple.Security.idskeychainsyncingproxy.plist [loading]
[operation] com.apple.security.keychain - circle - notification.plist
[ongoing] com.Apple.sharingd.plist
[ongoing] com.Apple.soagent.plist
com.Apple.softwareupdate_notify_agent.plist [loading]
com.Apple.speech.speechdatainstallerd.plist [loading]
com.Apple.speech.speechsynthesisd.plist [loading]
[ongoing] com.Apple.speech.synthesisserver.plist
[ongoing] com.Apple.spindump_agent.plist
[ongoing] com.apple.spotlight.IndexAgent.plist
[ongoing] com.Apple.storeaccountd.plist
[ongoing] com.Apple.storeassetd.plist
[ongoing] com.Apple.storedownloadd.plist
com.Apple.storeinappd.plist [loading]
[ongoing] com.Apple.storelegacy.plist
com.Apple.storeuid.plist [loading]
[ongoing] com.Apple.suggestd.plist
[ongoing] com.Apple.swcd.plist
[ongoing] com.Apple.syncdefaultsd.plist
com.apple.syncservices.SyncServer.plist [loading]
com.Apple.syncservices.uihandler.plist [loading]
com.Apple.systemprofiler.plist [loading]
com.Apple.talagent.plist [loading]
[ongoing] com.Apple.tccd.plist
[ongoing] com.Apple.telephonyutilities.callservicesd.plist
com.Apple.thermaltrap.plist [loading]
[ongoing] com.Apple.tiswitcher.plist
com.Apple.trustd.agent.plist [loading]
com.apple.universalaccessAuthWarn.plist [loading]
com.Apple.universalaccesscontrol.plist [loading]
[ongoing] com.Apple.universalaccessd.plist
com.Apple.unmountassistant.UserAgent.plist [loading]
[ongoing] com.Apple.usernoted.plist
com.Apple.warmd_agent.plist [loading]
com.Apple.webinspectord.plist [loading]
[ongoing] com.apple.wifi.WiFiAgent.plist
com.Apple.XPC.loginitemregisterd.plist [loading]
com.Apple.XPC.otherbsd.plist [loading]
[loading] org.openbsd.ssh - agent.plist
bootps.plist [no charge]
[ongoing] com.apple.AirPlayXPCHelper.plist
com.apple.AppleFileServer.plist [loading]
com.apple.AssetCacheLocatorService.plist [loading]
com.apple.CommCenterRootHelper.plist [loading]
com.apple.CoreRAID.plist [loading]
[ongoing] com.apple.CrashReporterSupportHelper.plist
com.apple.DesktopServicesHelper.plist [loading]
com.apple.DumpGPURestart.plist [loading]
com.apple.DumpPanic.plist [loading]
[ongoing] com.apple.FileCoordination.plist
com.apple.FileSyncAgent.sshd.plist [no charge] (2015-08-22) -no signature!
com.apple.FontWorker.plist [loading]
com.apple.GSSCred.plist [loading]
com.apple.GameController.gamecontrollerd.plist [loading]
com.apple.IFCStart.plist [loading]
com.apple.IOAccelMemoryInfoCollector.plist [loading]
com.apple.IOBluetoothUSBDFU.plist [loading]
[loading] com.apple.Kerberos.digest - service.plist
com.apple.Kerberos.kadmind.plist [loading]
com.apple.Kerberos.kcm.plist [loading]
[ongoing] com.apple.Kerberos.kdc.plist
com.apple.Kerberos.kpasswdd.plist [loading]
[ongoing] com.apple.KernelEventAgent.plist
[loading] com.apple.MRTd.plist (2015-08-22) -invalid signature!
com.apple.ManagedClient.cloudconfigurationd.plist [loading]
com.apple.ManagedClient.enroll.plist [loading]
com.apple.ManagedClient.plist [loading]
com.apple.ManagedClient.startup.plist [no charge]
[ongoing] com.apple.MobileFileIntegrity.plist
com.apple.NetBootClientStatus.plist [no charge]
com.apple.NetworkDiagnostics.plist [loading]
com.apple.NetworkLinkConditioner.plist [loading]
com.apple.NetworkSharing.plist [loading]
[ongoing] com.apple.ODSAgent.plist
com.apple.PCIELaneConfigTool.plist [loading]
com.apple.PasswordService.plist [no charge]
com.apple.RFBEventHelper.plist [loading]
com.apple.RemoteDesktop.PrivilegeProxy.plist [loading]
com.apple.ReportCrash.Root.plist [loading]
com.apple.ReportPanicService.plist [loading]
com.apple.SCHelper.plist [loading]
[ongoing] com.apple.SubmitDiagInfo.plist
[ongoing] com.apple.TMCacheDelete.plist
com.apple.TrustEvaluationAgent.system.plist [loading]
com.apple.UserEventAgent-[ongoing] System.plist
com.apple.UserNotificationCenter.plist [loading]
[ongoing] com.apple.WindowServer.plist
com.apple.WirelessRadioManagerd-[ongoing] osx.plist
com.Apple.afpfs_afpLoad.plist [loading]
com.Apple.afpfs_checkafp.plist [loading]
[loading] com.apple.airplaydiagnostics.server.mac.plist (2015-08-26) -/AppleInternal/Applications/AirPlayDiagnostics.app/Contents/Resources/AirPlayDi agnosticsServer: Executable not found!
com.Apple.airport.wps.plist [loading]
[ongoing] com.Apple.airportd.plist
com.Apple.AKD.plist [loading]
com.Apple.Alf.agent.plist [loading]
com.Apple.appleseed.fbahelperd.plist [loading]
com.Apple.applessdstatistics.plist [loading]
[ongoing] com.Apple.APSD.plist
[ongoing] com.Apple.aslmanager.plist
com.Apple.atrun.plist [no charge]
[ongoing] com.Apple.audio.coreaudiod.plist
[ongoing] com.Apple.audio.systemsoundserverd.plist
com.Apple.auditd.plist [loading]
[ongoing] com.Apple.autofsd.plist
com.Apple.automountd.plist [loading]
com.Apple.avbdeviced.plist [loading]
com.Apple.awacsd.plist [loading]
[ongoing] com.Apple.awdd.plist
com.Apple.backupd-[ongoing] auto.plist
com.Apple.backupd.plist [loading]
[ongoing] com.Apple.blued.plist
com.apple.bluetoothReporter.plist [loading]
com.Apple.bluetoothaudiod.plist [loading]
com.Apple.bnepd.plist [loading]
com.Apple.BSD.dirhelper.plist [loading]
[ongoing] com.Apple.cache_delete.plist
[ongoing] com.Apple.cfprefsd.XPC.daemon.plist
[loading] com.apple.cloudfamilyrestrictionsd - mac.plist
com.apple.cmio.AVCAssistant.plist [loading]
com.apple.cmio.AppleCameraAssistant.plist [loading]
com.apple.cmio.IIDCVideoAssistant.plist [loading]
com.apple.cmio.VDCAssistant.plist [loading]
com.apple.cmio.iOSScreenCaptureAssistant.plist [loading]
com.Apple.colorsyncd.plist [loading]
com.Apple.comsat.plist [no charge]
[ongoing] com.Apple.configd.plist
[loading] com.apple.configureLocalKDC.plist (2015-08-22) -no signature!
com.Apple.corecaptured.plist [loading]
[ongoing] com.Apple.coreduetd.OSX.plist
[ongoing] com.Apple.CoreServices.AppleEvents.plist
com.Apple.CoreServices.appleid.Passwordcheck.plist [loading]
[ongoing] com.Apple.CoreServices.launchservicesd.plist
[ongoing] com.Apple.CoreServices.sharedfilelistd.plist
[ongoing] com.Apple.coreservicesd.plist
com.Apple.corestorage.corestoraged.plist [loading]
com.Apple.corestorage.corestoragehelperd.plist [loading]
[ongoing] com.Apple.coresymbolicationd.plist
com.Apple.csrutil.report.plist [loading]
[ongoing] com.Apple.ctkd.plist
[ongoing] com.apple.cvmsServ.plist
com.Apple.diagnostic.uuidpathd.plist [loading]
[ongoing] com.Apple.diagnosticd.plist
[ongoing] com.Apple.diskarbitrationd.plist
com.Apple.diskmanagementd.plist [loading]
com.Apple.diskmanagementstartup.plist [no charge]
com.Apple.displaypolicyd.plist [loading]
[ongoing] com.Apple.distnoted.XPC.daemon.plist
com.Apple.dnsextd.plist [no charge]
com.Apple.dpaudiothru.plist [loading]
com.Apple.DPD.plist [loading]
com.Apple.dspluginhelperd.plist [loading]
com.Apple.DVDPlayback.SetRegion.plist [loading]
com.Apple.dynamic_pager.plist [loading]
com.Apple.eapolcfg_auth.plist [loading]
com.Apple.eFax.plist [no charge] (2015-08-22) -no signature!
[loading] com.apple.efilogin - helper.plist
[loading] com.apple.emlog.plist (2015-08-22) -invalid signature!
com.Apple.Emond.aslmanager.plist [loading]
com.Apple.Emond.plist [loading]
com.Apple.EPPC.plist [loading]
com.Apple.familycontrols.plist [loading]
com.Apple.findmymac.plist [loading]
com.Apple.findmymacmessenger.plist [loading]
com.Apple.firmwaresyncd.plist [no charge]
com.Apple.fontd.plist [loading]
com.Apple.fontmover.plist [loading]
[ongoing] com.Apple.fseventsd.plist
[no charge] com.apple.ftp - proxy.plist
com.Apple.Getty.plist [no charge]
[loading] com.apple.gkreport.plist (2015-09-29) -no signature!
com.Apple.GSSD.plist [loading]
com.Apple.hdiejectd.plist [loading]
[ongoing] com.Apple.hidd.plist
com.Apple.hidfud.plist [loading]
[ongoing] com.Apple.icloud.findmydeviced.plist
[ongoing] com.Apple.iconservices.iconservicesagent.plist
[ongoing] com.Apple.iconservices.iconservicesd.plist
[ongoing] com.Apple.ifdreader.plist
com.Apple.installandsetup.systemmigrationd.plist [loading]
[ongoing] com.Apple.installd.plist
com.Apple.Installer.osmessagetracing.plist [loading]
com.Apple.kcproxy.plist [loading]
com.Apple.kdumpd.plist [no charge]
[ongoing] com.Apple.kextd.plist
com.Apple.kuncd.plist [loading]
com.Apple.locate.plist [no charge] (2015-08-22) -no signature!
[ongoing] com.Apple.locationd.plist
com.Apple.lockd.plist [loading]
com.Apple.logD.plist [failure]
[ongoing] com.Apple.logind.plist
com.apple.loginwindow.LFVTracer.plist [loading]
[ongoing] com.Apple.loginwindow.plist
com.Apple.logkextloadsd.plist [loading]
[ongoing] com.Apple.LSD.plist
[ongoing] com.apple.mDNSResponder.plist
com.apple.mDNSResponderHelper.plist [loading]
com.Apple.mbsystemadministration.plist [loading]
com.Apple.mbusertrampoline.plist [loading]
com.Apple.mdmclient.daemon.plist [loading]
com.Apple.mdmclient.daemon.runatboot.plist [no charge]
[ongoing] com.Apple.metadata.MDS.index.plist
[ongoing] com.Apple.metadata.MDS.plist
com.Apple.metadata.MDS.scan.plist [loading]
com.Apple.metadata.MDS.spindump.plist [loading]
com.Apple.MSRPC.echosvc.plist [no charge]
com.Apple.MSRPC.lsarpc.plist [loading]
com.Apple.MSRPC.mdssvc.plist [loading]
com.Apple.MSRPC.Netlogon.plist [loading]
com.Apple.MSRPC.Srvsvc.plist [loading]
com.Apple.MSRPC.Wkssvc.plist [loading]
com.Apple.mtmd.plist [loading]
com.Apple.mtmfs.plist [no charge]
[ongoing] com.Apple.nehelper.plist
com.Apple.nesessionmanager.plist [loading]
com.Apple.netauth.sys.auth.plist [loading]
com.Apple.netauth.sys.GUI.plist [loading]
[ongoing] com.Apple.netbiosd.plist
[ongoing] com.Apple.networkd.plist
[ongoing] com.Apple.networkd_privileged.plist
com.Apple.newsyslog.plist [loading]
com.Apple.nfsconf.plist [loading]
com.Apple.nfsd.plist [loading]
com.Apple.NIS.ypbind.plist [loading]
com.Apple.noticeboard.State.plist [loading]
[ongoing] com.Apple.notifyd.plist
[ongoing] com.Apple.nsurlsessiond.plist
com.Apple.nsurlstoraged.plist [loading]
[ongoing] com.Apple.ocspd.plist
com.Apple.odproxyd.plist [no charge]
[ongoing] com.Apple.opendirectoryd.plist
[loading] com.apple.periodic - daily.plist
[loading] com.apple.periodic - monthly.plist
[loading] com.apple.periodic - weekly.plist
com.Apple.pfctl.plist [loading]
com.Apple.PFD.plist [loading]
com.Apple.platform.ptmd.plist [loading]
[ongoing] com.Apple.powerd.plist
com.Apple.powerd.SWD.plist [loading]
com.Apple.preferences.TimeZone.AdminTool.plist [loading]
com.Apple.preferences.TimeZone.Auto.plist [loading]
com.Apple.printtool.daemon.plist [loading]
com.Apple.racoon.plist [loading]
com.Apple.remotepairtool.plist [loading]
[ongoing] com.Apple.revisiond.plist
com.Apple.rootless.init.plist [loading]
com.Apple.rpcbind.plist [loading]
[ongoing] com.Apple.sandboxd.plist
com.Apple.screensharing.plist [loading]
com.Apple.scsid.plist [loading]
[ongoing] com.Apple.secinitd.plist
com.apple.security.FDERecoveryAgent.plist [no charge]
com.Apple.Security.agent.login.plist [loading]
com.Apple.Security.authhost.plist [loading]
[ongoing] com.Apple.Security.syspolicy.plist
[ongoing] com.Apple.securityd.plist
[ongoing] com.Apple.securityd_service.plist
com.Apple.sessionlogoutd.plist [loading]
com.Apple.SMB.preferences.plist [loading]
com.Apple.smbd.plist [no charge]
com.Apple.softwareupdate_download_service.plist [loading]
com.Apple.softwareupdate_firstrun_tasks.plist [loading]
[ongoing] com.Apple.softwareupdated.plist
com.Apple.speech.speechsynthesisd.plist [loading]
[ongoing] com.Apple.spindump.plist
com.Apple.startupdiskhelper.plist [loading]
com.Apple.statd.notify.plist [loading]
com.Apple.storagekitd.plist [loading]
[ongoing] com.Apple.storeaccountd.daemon.plist
com.Apple.storeagent.daemon.plist [loading]
com.Apple.storeassetd.daemon.plist [loading]
com.Apple.storedownloadd.daemon.plist [loading]
com.Apple.storereceiptinstaller.plist [loading]
[ongoing] com.Apple.suhelperd.plist
[ongoing] com.Apple.symptomsd.plist
com.Apple.sysdiagnose.plist [loading]
[ongoing] com.Apple.syslogd.plist
[ongoing] com.Apple.sysmond.plist
com.Apple.system_installd.plist [loading]
com.Apple.systemkeychain.plist [loading]
com.Apple.SystemPreferences.Installer.plist [loading]
com.Apple.systemstats.analysis.plist [loading]
com.Apple.systemstats.daily.plist [loading]
[ongoing] com.Apple.systemstatsd.plist
[loading] com.apple.taskgated - helper.plist
[ongoing] com.Apple.taskgated.plist
[ongoing] com.Apple.tccd.System.plist
com.Apple.thermald.plist [loading]
com.Apple.trustd.plist [loading]
com.Apple.ucupdate.plist [loading]
com.Apple.uninstalld.plist [loading]
com.Apple.unmountassistant.sysagent.plist [loading]
com.apple.updateEFIDesktopPicture.plist [loading]
[ongoing] com.Apple.Usbd.plist
[ongoing] com.Apple.usbmuxd.plist
com.Apple.UUCP.plist [no charge]
[loading] com.apple.var - db-dslocal - backup.plist
com.Apple.vsdbutil.plist [loading]
[ongoing] com.Apple.warmd.plist
[ongoing] com.Apple.watchdogd.plist
[ongoing] com.Apple.wdhelper.plist
com.Apple.wifid.plist [loading]
[ongoing] com.Apple.wirelessproxd.plist
com.Apple.wwand.plist [loading]
[ongoing] com.Apple.XPC.SMD.plist
com.Apple.XPC.uscwoap.plist [loading]
com.Apple.Xsan.plist [no charge]
com.Apple.xsandaily.plist [no charge]
com.Apple.xscertadmin.plist [no charge]
[no charge] com.apple.xscertd - helper.plist
com.Apple.xscertd.plist [no charge]
com.vix.cron.plist [loading]
exec.plist [no charge]
finger.plist [no charge]
FTP.plist [no charge]
login.plist [no charge]
ntalk.plist [no charge]
org.Apache.httpd.plist [no charge] (2015-08-22) -no signature!
[no charge] org.cups.cups - lpd.plist
[loading] org.cups.cupsd.plist (2015-08-22) -invalid signature!
[no charge] org .net - snmp.snmpd.plist (2015-09-09) -no signature!
[operation] org.ntp.ntpd.plist (2015-08-22) -no signature!
org.openldap.slapd.plist [no charge]
org.Postfix.master.plist [loading]
[loading] org.postfix.newaliases.plist (2015-08-22) -no signature!
Shell.plist [no charge]
[loading] ssh.plist (2015-08-20) -no signature!
Telnet.plist [no charge]
TFTP.plist [no charge]
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-01-29) [Support]
[loading] com.google.keystone.agent.plist (2016-03-02) [Support]
[loading] com.oracle.java.Java - Updater.plist (2014-09-04) [Support]
[loading] com.symantec.errorreporter - periodicagent.NFM.plist (2016-02-27) [Support]
[operation] com.symantec.uiagent.application.NFM.plist (2016-01-20) [Support]
com.TeamViewer.TeamViewer.plist [no charge] (2015-03-02) [Support]
com.TeamViewer.teamviewer_desktop.plist [no charge] (2015-03-02) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-01-29) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-01-29) [Support]
[loading] com.adobe.fpsaud.plist (2016-01-29) [Support]
[loading] com.google.keystone.daemon.plist (2016-03-02) [Support]
[loading] com.oracle.java.Helper - Tool.plist (2014-09-04) [Support]
[loading] com.symantec.SymLUHelper.NFM.plist (2016-01-20) [Support]
[loading] com.symantec.UninstallerToolHelper.NFM.plist (2016-01-20) [Support]
[operation] com.symantec.deepsight - extractor.NFM.plist (2016-01-20) [Support]
[loading] com.symantec.errorreporter - periodic.NFM.plist (2016-02-27) [Support]
[loading] com.symantec.liveupdate.daemon.NFM.plist (2016-01-20) [Support]
[operation] com.symantec.nfm.wps.plist (2016-01-20) [Support]
[operation] com.symantec.sharedsettings.NFM.plist (2016-01-20) [Support]
[operation] com.symantec.symdaemon.NFM.plist (2016-01-20) [Support]
[loading] com.teamviewer.Helper.plist (2015-03-02) [Support]
com.TeamViewer.teamviewer_service.plist [no charge] (2015-03-02) [Support]
[loading] com.westerndigital.WD - SmartWare - install .plist (2013-12-09) [Support]
[failure] com.adobe.ARM. [...]. plist (2013-03-13) [Support]
[loading] com.apple.SafariBookmarksSyncer.plist (2011-04-27) -/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/SafariSyn customer: Executable not found!
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Request for SpeechSynthesisServer (/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks SpeechSynthesis.framework/Versions/A/SpeechSynthesisServer.app)
Apple-CCS-20151115-210320 UNKNOWN (missing value)
Hidden BOINCManager Application (/ Applications/BOINCManager.app)
SymSecondaryLaunch UNKNOWN (missing value)
WDQuickView UNKNOWN (missing value)
[ongoing] com.apple.AccountPolicyHelper
[ongoing] com.apple.AddressBook.ContactsAccountsService
[ongoing] com.apple.AmbientDisplayAgent
[ongoing] com.apple.BKAgentService
[ongoing] com.apple.CloudPhotosConfiguration
[ongoing] com.apple.CodeSigningHelper
[ongoing] com.apple.DataDetectorsDynamicData
[loading] com.apple.DesktopServicesHelper.DF80CD70 - 017F-4B5D-SUMMER-40059B1515C4
com.apple.DictionaryServiceHelper [loading]
com.apple.FCiCloudPrefUpdater [loading]
com.apple.IASUtilities.IASCloudConfigHelper [loading]
[ongoing] com.apple.ImageCaptureExtension2.73312
[ongoing] com.apple.InputMethodKit.TextReplacementService
com.apple.Localization.SetDefaultsService [loading]
com.apple.MailServiceAgent [loading]
[ongoing] com.apple.PerformanceAnalysis.animationperfd
com.apple.SpeechRecognitionCore.brokerd [loading]
[ongoing] com.apple.ViewBridgeAuxiliary
com.Apple.accounts.DOM [loading]
com.apple.appkit.xpc.sandboxedServiceRunner [loading]
[ongoing] com.Apple.Authd
com.Apple.cmio.registerassistantservice [loading]
com.Apple.Facebook.XPC [loading]
[ongoing] com.Apple.GEOD
[loading] com.apple.gssd.DE000000-A086-0100-0000-000000000000
com.Apple.hiservices-[ongoing] xpcservice
[loading] com.apple.iBooksX - SecureUserDefaults
[ongoing] com.apple.iCloudHelper
[ongoing] com.apple.iTunesHelper.79392
[ongoing] com.apple.imdpersistence.IMDPersistenceAgent
com.apple.iokit.IOServiceAuthorizeAgent [loading]
com.Apple.IOKit.ioserviceauthorized [loading]
com.Apple.LinkedIn.XPC [loading]
[loading] com.apple.mdworker.32bit.01000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.32bit.02000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.lsb.02000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.mail.01000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.mail.02000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.mail.03000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.mail.04000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.shared.00000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.shared.01000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.shared.02000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.shared.03000000-0000-0000-0000-000000000000
[operation] com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.01000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.02000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.03000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.04000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.05000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.06000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.07000000-0000-0000-0000-000000000000
[loading] com.apple.mdworker.single.08000000-0000-0000-0000-000000000000
com.apple.messages.BuddyPictureService [loading]
com.Apple.SBD [loading]
com.apple.security.XPCKeychainSandboxCheck [loading]
com.apple.security.XPCTimeStampingService [loading]
[loading] com.apple.security.agent.login.00000000-0000-0000-0000-0000000186A8
[loading] com.apple.security.authhost.00000000-0000-0000-0000-0000000186A8
com.apple.sharekit.EntitlementsHelper [loading]
com.Apple.SystemAdministration.writeconfig [loading]
com.Apple.tencentweibo.XPC [loading]
com.Apple.tonelibraryd [loading]
com.Apple.Twitter.XPC [loading]
com.Apple.weibo.XPC [loading]
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000002.AppleSpell
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000005.EtreCheck
com.HP.devicemonitor [failure]
edu.Berkeley.BOINC.109152 [loading]
o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-16) [Support]
Java applet: 1.0.1 (2013-02-01)
Default browser: 601 - SDK 10.11 (2016-01-20)
AdobePDFViewerNPAPI: 15.010.20059 - SDK 10.8 (2016-02-17) [Support]
FlashPlayer - 10.6: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]
Silverlight: 4.1.10329.0 (2013-07-25) [Support]
QuickTime Plugin: 7.7.3 (2016-01-20)
Flash Player: 20.0.0.306 - SDK 10.6 (2016-02-09) [Support]
googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-11) [Support]
iPhotoPhotocast: 7.0 (2013-02-01)
AdobePDFViewer: 15.010.20059 - SDK 10.8 (2016-02-17) [Support]
RL Secure Layer plugin: Unknown - SDK 10.5 (2015-11-25) [Support]
JavaAppletPlugin: Java 8 66 update build 17 (2015-11-29) check the version of
WebEx64: 1.0 - SDK 10.6 (2014-10-10) [Support]
CitrixOnlineWebDeploymentPlugin: 1.0.105 (2013-04-25) [Support]
UploadManager: Unknown - SDK 10.5 (2015-11-25) [Support]
ContentManager: Unknown - SDK 10.5 (2015-11-25) [Support]
RocketEngine: Unknown - SDK 10.5 (2015-11-25) [Support]
AdBlock (2015-09-28)
Norton Antivirus (2016-02-27)
EcammAudioLoader: 1.0.3 - SDK 10.8 (2015-09-04) [Support]
CallRecorder: v2.5.16 - 10.8 SDK (2015-09-04) [Support]
Dual (2013-10-26) [Support]
Flash Player (2016-01-29) [Support]
Java (2015-11-29) [Support]
Perian (2011-07-23) [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: YES
Volumes to back up:
Korak: Disc size: 499,25 GB disc used: 366,14 GB
Destinations:
Rama1 [Local]
Total size: 333,40 GB
Total number of backups: 64
An older backup: 2015-06-05, 11:06
Last backup: 2016 - 03-08 at 12:47
Backup disk size: too small
Backup size GB 333,40 < (disc 366,14 GB X 3)
6% WindowServer
2% fontd
kernel_task 2%
0% NFMWps
0% SymDaemon
Top of page process of memory: ⓘ
1.10 GB kernel_task
NFMWps 426 MB
SymDaemon 344 MB
262 MB mdworker (13)
213 MB mds_stores
10.00 GB of free RAM
5.91 used GB RAM (3.89 GB being cached)
Used Swap 0 B
March 8, 2016, 09:59:45 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-08-095945_[redacted].crash
/ Library/Application Support/Symantec/*/SymDaemon.bundle/Contents/MacOS/SymDaemon
8 March 2016, 09:57:45 self test - passed
March 8, 2016, 09:03:53 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-08-090353_[redacted].cpu_reso urce.diag [details]
March 8, 2016, 08:30:21 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-08-083021_[redacted].crash
March 7, 2016, 18:30:53 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-07-183053_[redacted].cpu_reso urce.diag [details]
March 7, 2016, 08:24:54 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-07-082454_[redacted].crash
March 7, 2016, 06:44 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-07-064400_[redacted].crash
March 6, 2016, 17:18:42 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-06-171842_[redacted].crash
March 6, 2016, 16:02:54 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-06-160254_[redacted].cpu_reso urce.diag [details]
March 5, 2016, 20:17:20 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-05-201720_[redacted].cpu_reso urce.diag [details]
March 5, 2016, 15:21:28 /Library/Logs/DiagnosticReports/SymDaemon_2016-03-05-152128_[redacted].cpu_reso urce.diag [details]
1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.
The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.
Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.
2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.
There are ways to back up a computer that is not fully functional. Ask if you need advice.
3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.
You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.
In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.
However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.
4. here is a general summary of what you need to do, if you decide to go forward:
☞ Copy text from a particular web page (not this one) to the Clipboard.
☞ Paste into the window to another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Stick the results, which will be copied automatically, in a response on this page.
These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.
5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.
You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.
6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.
7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.
8. start the Terminal application integrated in one of the following ways:
☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.
9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.
If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.
If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.
10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:
Test started
Part 1 of 4 done at: … sec … Part 4 of 4 done at: … sec
The test results are on the Clipboard.
Please close this window.
The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.
Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.
In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.
11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.
At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.
If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.
12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.
14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.
15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.
-
Start-up delay triggers real beginning of the acquisition of waveform on SMU-6535?
How long does take a condition of trigger start happening to the actual start of the acquisition of waveform on an SMU-6535? In my case, it takes ~ 70ms, who seems to be too long. The delay times, I found in the manual are all down in one nano-second two-digit range.
Here's a little history: I'm trying to measure a PWM signal to report cyclic verity, generation of total time, frequency, etc.
The PWM signal is entering in the SMU-6535 on line Port3/3, and I rider Port3/Line3 to PFI5 on my map of derivation. Start trigger is configured to fire on the PFI5 front, with the acquisition of waveform happening on Port3/Line3. PFI5 and Port3/Line3 consider both the same waveform PWM, which is the yellow signal out of range.
The task is configured to use a sample of 10 Mhz clock frequency and collect samples of 2 500 000, coming at a time of acquiring signals 250ms. You can see on the scope probe that there is a gap in the PWM signal. I want to collect just the first section, and I know that the article is (or should be) long 250ms.
However, I am very clearly this gap and 70ms ~ the next wave PWM of the PXI system. PXI signals is checked 250ms. The problem is that it is delayed by ~ 70ms when the first time PFI5 goes high when it actually starts the acquisition.
Ignore the ringing. The probe is not the best reference.
Here's the installation code:
readPwmTask = new NationalInstruments.DAQmx.Task ("task of reading PWM");
readPwmTask.DIChannels.CreateChannel ("PXI1Slot6, Port3/line 3", ", ChannelLineGrouping.OneChannelForAllLines);readPwmTask.Triggers.StartTrigger.ConfigureDigitalEdgeTrigger ("/ PXI1Slot6/PFI5", DigitalEdgeStartTriggerEdge.Rising);
readPwmTask.Timing.ConfigureSampleClock ("", 10000000, SampleClockActiveEdge.Rising, SampleQuantityMode.ContinuousSamples);Reader = new DigitalSingleChannelReader (readPwmTask. Stream);
drive. SynchronizeCallbacks = true;drive. BeginReadWaveform (2500000, New AsyncCallback (DataReady), readPwmTask);
Narrowed it down.
This problem only occurs when it is the first acquisition of signals in the life of the application. If I do a 'normal' acquisition before attempting to use the departure function acquisition, it works much better.
-
Positions the cursor can not extract the subset of waveform
Hello
I try to get two positions the cursor on a graph of waveform for the entries for the code below, which will start a process that will analyze a subset of the wave. The two sliders define the start and endpoint for the waveform (cursor 0 is the starting point, slider 1 is the endpoint). However, I have questions as Labview continues to tell me that the values I have chosen are not the integer multiples of dt. I don't know what it takes to avoid this problem. I tried to get cursor plots are of unique land types so they snap to the values x (I guess it's that simple concession means), but it makes no difference. Note that there are 2 slots originally going to this graph of waveform (waveform original and medium), but the selection should be only one of them (single parcel is attributed to original waveform). Help, please!
Edit - just a quick update. I noticed that if I re - run the VI and activate this part of the VI that supports the subset of waveform, I actually get what I want. So, I guess that I don't put something correctly in another part of the VI where I have a structure of the event that updates the position of the cursor in numerical indicators. Could be the problem?
I solved the problem. Have the two sliders on the plateau at the only plot on the original waveform should have prevented this problem, but I didn't notice that I was feeding in an another waveform beforehand which automatically changes the assignment of the cursor, causing my problem.
Now cursors remain set on the only ground I want after a few adjustments.
-
Connecting leads to build the array in a VI script
Hello
I'm looking for a way to connect the wires to a knot of "generation table" in a script of VI.
I have a table of entries that should translate in a table via node 'building the table '. I added successfully to the input terminals for 'building the table' node in a script of VI. However, the program fails when I try to execute a loop to wire all of the entries in the order. The problem is, all the sons of entry to the first element of the' generation '. Snapshot of the code is attached.
Please suggest me a way to link the different elements at different entrances to the node 'building the table '.
Thank you.
Concerning
HB
LV12 running at the moment, the fastest to write a small example that so open LV14 and watch your VI.
-
How to determine the strict reference to the table of waveform
Hello
I want to change the properties of a waveform by programming. I used to get all references maps of waveform a function of range in my script VI VI. Then I typecasted references to more specific class (strict-single track) after this trial I was able set properties such as data history. Everything works fine but if I add a graphic that is multiplot, that this approach does not work.
The problem is that in the table of references, there is reference to a graph in multiplot waveform, and this reference is not possible typcast to the more specific category (strict-single parcel).
My question is: how to determine if the reference in the table is matching the proper waveform (single or multiplot) charts.
In the VI attached is a code that demonstrates my problem.
Thanks a lot for the replies
Jan
Thank you for advice. VI point 2 from your answer, I created and it works. The solution is attached.
If I understand it correctly. I need to know the type of chart to come.
My first idea was to create a VI in Drop that initializes all the graphics of VI on chart type independently.
But this solution is fine because I will only use graphics-single plot and multiplot(two elements).
Thank you
Jan
Maybe you are looking for
-
Activate UPnP doesn't "stick" on BEFSR41
I am listening to music files to my A / V system. After weeks of facing problems, I discovered that UPnP has been disabled (by default) on the router. After you have enabled UPnP on the router, bingo... it worked. My A / V system has a Yamaha A / bro
-
Chicony 2.0 usb webcam. While videoconferencing runs very slowly. Does anyone have an idea?
-
How to convert my document scan to pdf format?
How to convert my document scan to pdf format?
-
What is Adobe CEF helper (RdrCEF.exe) and what is it?
I see RdrCEF.exe running when I run the application Adobe Reader DC. Anyone know what this process is and does?Thanks in advance!
-
MaxL export path in 11.1.2.1 HPAIX
Hi gurus,What is the full path for maxl default export file in HP AIX?Version: 11.1.2.1Thank you