Building a structure to deal with four Boolean (true or false) input.

I currently have two Boolean inputs that I would use to select a structure of business cases. I would like to have the four cases, each depends on the two Boolean true/false question. If variable Boolean 1 = true, then case 1 must be used, if Boolean 2 = true, case 2 is to be used, etc.

What structure use to convert these Boolean entries in digital case?

Build table for two Boolean values, then a Boolean table number.

Tags: NI Software

Similar Questions

  • structural problem dealing with default 0, 1, 2

    Good afternoon

    I have a question about the structure of the case. If you use 3 cases, by default, 0, 1 and 2, as in the following VI.

    How can you fix that the sum is never 3? Because when you turn on the switch 1 and 2 at the same time it gives the sum of 3 and the case will go to the default settlement.

    Thanks for the help.

    Use an option button. You can replace the standard buttons with your great rocker.

    Lynn

  • How to connect a string to Boolean true or false constant

    Hello.

    I can't try to figure out how to connect a string constant to a result of a function of true/false. I create a VI that creates a random number, and then has the user to enter a number in numerical order. These 2 numbers are compared, and if the number of users is smaller, I want a string constant to display "too small." If the user is equal, I want the string constant to display "correct" and if the number is larger, the constant will display "too big."

    This is a picture of what I'm doing, but notice I has not inserted for 'too broad' and 'too small' string constants, as I always try to understand how to connect the string constant to this.

    Thanks for any help.


  • Help, I'm controlling a flashing, sending him a value true or false within a box structure.

    Help, I'm controlling a flashing, sending him a value true or false within a box structure. The LED changed to resemble a specific indicator, so I can't just create a property node for LED and the value that flashes (unless someone can tell me how). I can see a number of ways to put my blinker indicator changed positions, but they all use while loops. What I am struggling with is controlling the while loop using a Boolean true or false.

    What I try to achieve is to create a virtual car dashboard and control using serial data. I built a VI as follows 3 bytes from the serial port and the data that I send to the VI will be in the form of a letter followed by 2 numbers. I uses the letter to settle the case structure then change numbers to different cases selected by the letter.

    I compare then 2 numbers and according to the ASCII values, I'm a true or false for the comparison.

    So once I set the indicator flashes, I need that it continues to Flash until he gets another command to stop.


  • Which situations give an event structure do not capture a Boolean value changes?

    LabVIEW 9 x 86

    Windows 7 x 64

    I have an event structure that works very well.  It has 5 cases, each triggered by a change in value of various indicators.

    I added another case of event, I'm trying to raise the case of the event with the express control "Out of time", I made a deal to raise when the Boolean value "out of time".  The structure of the event does not run when the value changes.

    In addition, once figured out how to make this indicator to trigger structure of the event, I would like to only trigger when the value goes from 0 to 1 and not from 1 to 0

    Search the forums for "event to change value" and "value traffic".

    The value (I guess you have on the structure of your event, bar header you seems to miss information.) the change is triggered only when the user enters new data in a control, or you write a new value programmatically by using the Value property node (signaling).  Completed just by a program written for a local variable, or do not ' value' property node.

    To trigger that in a sense, you can put the code in the event of a case within a case structure so that it runs only when it it True (or False, if that's what it takes.)

  • Increment and decrement with a Boolean value entered

    Hello Experts Labview (and in fact life savers!)

    I have a digital controller (button) in my VI, digital indicator, in addition to a Boolean of power input.

    As an initial state, the digital display will contain a certain value (zero for example) and will only receive the variation in the button entry as long as the Boolean is true, and then add it to this initial value.

    What is the change ? lets say that the button was on 8 before I touched the Boolean true, the value of the indicator is zero, and then I hit the Boolean true.

    Now, when I move the button from 8 to 18 years (variation of + 10) , I want to receive the indicator + 10 and add it to the zero, now the result is 0 + 10 = 10

    Now, the value is false, I move the button and nothing happens to the in the indicator 10.

    Now, the Boolean value is true once again, let's say the button was about 4 at the time, I hit the Boolean true and it spend 4 to 1 (change-3) , the indicator value will now be 10 + (-3) = 7

    I hope I explained the idea in a clear manner, I would be very grateful if someone could help me with this.

    P.S. I have attached only the vi to illustrate the idea.

    Thanks in advance

    You care only remarks how the button changed.  Therefore, you must subtract the old value and the new value to get how to change the button.  Then add inside the structure of the case, this difference to your value that belongs in the registry to offset.

  • before trigger with four cards PXI-6115

    Hello

    I have a PXI-1010 chassis with four cards PXI-6115, labeled boards 3, 4, 5, 6, installed in it.  Each of these cards has 4 analog inputs (BNC inputs).  In my current system, all four boards fire off the coast of the entrance on first 3 analog.  I'm using an analog trigger mounted on Board 3, which then triggers a trigger digital beginning on the boards, 4, 5 and 6.

    Now, I would be able to take samples before firing.  I worked on this for a while and that seems to happen is that 3rd Chess Board properly triggers and takes samples of relaxation before, but plates 4, 5 and 6 are somehow trigger too late or early or something - they never record my test signal input of.

    Can someone help me understand where I'm going wrong here?  I enclose my VI and also a picture of the important part of my block diagram.

    Thank you!

    It could be that you connect the number of samples per channel in the clocks of the sample for tables 4, 5 and 6. This will ensure that the task creates a buffer on your PC that is large enough to accommodate all the samples you want to read.

    Also, why did you remove the structure of sequence? You need to ensure that the advice of slaves were armed in front of the master bedroom.

    Here is a link to an example similar to what you're trying to do. This example acquires the data at different speeds on different boards, but it seems that everything is identical to what you are doing. I think it might be useful for you: https://decibel.ni.com/content/docs/DOC-11698

    Jeremy P.

  • Generating unique random number with a Boolean signal on an RT target

    Hello, this is my first time asking your question. I apologize if I post this question in the wrong Council.

    [What I'm trying to do]

    I am stable heating and cooling in an experimental space that I (with cRio9024).

    And I'm putting a different experimental condition in space based on the function 'random number '.

    'Different experimental conditions' sense different combinations of Tind, Twat_s and mdot (refer to the attached VI).

    For example, if I get the Boolean TRUE signal.

    I should have a set of [Tind, Twat_s, mdot] = [21,14,0.05], and IS this set of numbers until this Boolean signal goes to FALSE.

    And when the signal passes to the TRUE once again.

    I should have a different set of [Tind, Twat_s, mdot] = [24,16,0.15] for example.

    [I]

    Problem I am with my code is that,

    When the VI is running, the random number remains the same as the Boolean signal is set to TRUE.

    From what I tried so far for the last couple days, using 'the event structure' was the message more concerned that I found,

    However, LabView help tells me that "structure of the event" on the objectives of the RT do not support the events associated with the user interface such as the façade of VI or controls panels.

    I would therefore ask a quick help, since my knowledge of LabView is exhausted at this point.

    This is so the part where I want to generate random numbers, WHEN this structure case is TRUE.

    convert whole numbers, random numbers

    Use them as a table index,

    while I can choose conditions from radom to the given set of conditions.

    Once more, I want to do is,

    generate a SINGLE random number series when the structure above is TRUE.

    Hope I have developed quite clear.

    I'm appreciated for any kind of advice.

    Thank you!

    You just need to store the Boolean from the previous run. Then the logic would be (I'll call her Boolean previous B_prevand current boolean B):

    If B AND B_prev > don't generate new values

    otherwise if B > generate new values

    Edit: to store your Boolean value, you can use a feedback node, or a loop with N = 1 and a registry change.

  • Where can I find the Shaper tool? I have a pencil with four options of pencil, but no option of shaper. I am CC, 2015.0.0

    I have reviewed some of the other discussions that indicate that the pencil is now in the Shaper tool. However, I have not a Shaper tool. Instead, I have a pencil with four options of pencil and no option Shaper. Is this a bug?

    Router tool delivered in CC2015.2 Please update your software to the latest version.

    additional help once you upgrade here: build new forms with tools Shaper and form Builder in Illustrator

  • I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    I forgot my password for apple and have permission to stage the 2 and broken my old phone and do not have the same number of what I can do my account is already waiting to be reset, but it takes apple long to to deal with the what else is there to do?

    You know the e-mail password what do you use? I lost over $ 30 on my old Apple ID because I couldn't get into the email and apple would not transfer my money to my new account.

  • How can I copy recipients of a letter sent in a fresh mail I have to deal with some of the deleted recipients?

    I want to be able to select the recipients of a new mail from a mail sent. I want to be able to copy some of the recipients of those previous mail, but not all. Is there a simple way to copy all the old recipients in a single operation, and then selecting some recipients to delete in one operation?

    jazzebel2 said

    My original question remains: how to remove some of the recipients at once? Is it possible to deselect say's five recipients on 20 without each of them manually and detached, one at a time?

    Really, I've had dealing with the situation that you have described. I don't think it's possible with current TB. You may request a feature on Bugzilla request.
    https://Bugzilla.Mozilla.org/

  • 100 requests to continue POST deal with error in Firefox 24

    BUG Firefox 24!
    24 Firefox manages POST requests with the error: when 100 continue answers are preceded by 200 OK response, and then Firefox does not deal with other responses (including 200 OK response) after receipt of the response to continue first 100.
    Earlier versions more handle 100 continue properly.

    I'm sorry, I tested my script with Mozilla Firefox 25 - was the same problem. But then I spilled http connection - the newspaper said then 100 response continues and 100 OK data are mixed and gzip'ped. Then I disable deflate module for my Apache Server - and all become Okey! So, I just disable the compaction modules incorrect return data to solve the problem. Web server: apache2-mpm-itk on Debian Linux winded 7.

  • ITunes has stolen my music from my computer. Because they do not want to deal with the public, what should I do to get back them.

    Every so often, iTunes sends a notice to update the iTunes on my computer. Last year after that they did, all sounds have disappeared from my list of reading hundreds of old songs. Now, when I click on any song or melody, nothing happens.

    Given that Apple does not want to deal with the public, I ask, what do I do now, please?

    See the empty/corrupted after upgrade/crash iTunes library. Ideally, the measures taken immediately after that the problem appeared would restore your library. In some cases your media may be still on the computer, but not when iTunes is looking to it. The songs that do not play show with an exclamation point in the view of songs? ITunes plays all audio signal at all?

    TT2

  • Continuing to grow/expand my limits: dealing with overflow

    I have a strange situation with a sensor that I hope you guys can help me with...

    I have a 16-bit binary value out of a chip.  I can read this quite well, but from time to time the signal has a behavior of infinity (from values near near 65535 values 0 close in a reading and vice versa). This is due to the chip and not BT reading problems, and I don't see all the settings in order to adjust it on the side of the chip...

    I wonder if there are strategies to deal with this on how to interpret the data.  Ideally, I would just change the low values up, but I can't find how reliable to apply.  I thought that the signal dropped to 2 ^ 15, which would be a pretty big indicator; I have no feeling if it is "legitimate".

    Thanks for any thoughts!

    If it's the acceleration, how your arm 'rest' can the axes y and z and x, accelerations, showing constant? How your acceleration will never be positive and negative ever?

    It does not explain what your graphic example, but if as you have already said you see numbers ranging from 65535 to near zero, it could be that you are a reading I16 and somehow castant or misinterpretation it like a U16.

    Then, for a noisy signal around zero,

    Cast-1 to U16 I16 gives 65535

    I16 cast 0 to U16 gives 0

  • I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact microsoft or microsoft studios.

    Dear, that which which may concern,.

    I do not want to promote the material for your business but I don't know how to do this. Could I be put in contact with the one dealing with promotion of contact from microsoft, or microsoft studios, anyone who takes care of the halo franchise.

    Hello

    Microsoft - unsolicited ideas
    http://www.Microsoft.com/en-us/legal/intellectualproperty/copyright/default.aspx#O14

    343 industries manage Halo - check community and forums
    https://www.halowaypoint.com/en-us

    I hope this helps.
    --------------------------------------------------------------------------------------------
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

Maybe you are looking for

  • Uninstall/install Skype

    My laptop came with Sype available on this subject and I don't know if that is preinstalled. Because of him show my computer is slow I think to do a uninstall/reinstall. Uninstalling removes the program completely? Also, what is happening for updates

  • get the MAX from the task frequency

    Hello I would like to know if it is possible to obtain the frequency configured in MAX for a particular task in LabVIEW. This is in order to launch the task set by the user in LabVIEW, as set in MAX: channels, frequency etc... I tried differentDAQmx

  • Windows boot slow.and installation of the drivers.

    Original title: Watch Windows reinstall the motherboard drivers? I just got my computer fixed and reinstalled windows vista home basic 64-bit. A week later a windows popup (windows new hardware detected) driver installation said that windows was rein

  • Windows 7 mouse stuttering!

    I have a mouse windows 7 stuttering issue, its not related to the video or audio. I replaced my mouse wireless mx with a whole new imperator razor without prevail. More I follow instructions and sons of old messages from win7 about similar questions

  • Best approach for the transmission of data and images

    We you write an app that will allow the user to take a picture of a document and enter a few bits of information about the document and then send it to our server. It is a mobile extension to a larger system of document management to back office we d