built-in webcam not detected on the XPS 17 (L702X)

Similar Questions

• Inspiron 1525 integrated webcam not detected when the laptop is open, but works when it is closed

  I see that the webcam works (blue light is on I can open less then to halfway and see the desktop and a part of the computer in photo. then open more than half and get error webcam not detected.)

  Help please

  Hello

  Check with Dell technical support, online documentation and drivers and their known forums
  problems and solutions.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  -------------------------

  Help generic camera:

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Built in webcam not found on the computer.

  Hi, back for a while that I had to have it replaced my computer screen. After that it has been replaced, my webcam not working not. He said that there is no webcam. Before that the screen had to be replaced, it works beautifully. What could be the problem and how to fix this? Thank you for your help.

  Hi Randalynf,

  Please answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2. When you say "screen is replaced", hear you screen has replaced for a new one? What was the exact problem with the monitor?

  3. what happens when you try to access with the Webcam software that came with the computer?

  This problem normally occurs when there is no problem with the driver for the Webcam device software.

  I suggest you follow the steps below to see if that helps.

  Method 1:
  

  Step 1: Find material webcam

  Take a quick moment to visually inspect the top of the screen of your computer. Look closely, you should see a small lens at the top in the Center, if your computer is equipped with a webcam. Some models do not come with a webcam and the area where the webcam would normally be resident is replaced by a small plastic cap.
  Often, there are small holes near the top center of your screen. These holes are for the microphone or other sensors and do not contain any webcam.
  • If your computer lacks a built-in webcam, you must use an external USB webcam.
  • If your computer is equipped with a built-in webcam and you can't use it, go to step 2

  Step 2: Find and use the Webcam software that came with your computer

  Try to access the webcam that is preinstalled on your computer.

  If you can't find and open the webcam for your computer software, then go to the next step.
  If you have found the software of the webcam and it opens and you see a picture, then finished. Your webcam works.
  If you found webcam software and it opens, but you can't see the video in the main display window, restart the computer and try again.
  If the problem persists, use the troubleshooting section "video does not appear in the webcam software.
  Method 2:
  
  If you are able to find the Webcam on your screen and you cannot view the video using the software installed, you may need to update the Webcam drivers for more later.
  Read the sections "If you have problems with your webcam' in the article and check the results.»
  • Help app and webcams camera
  • http://Windows.Microsoft.com/en-AU/Windows-8/camera-app-FAQ

  Hope this information helps. Response with status so that we can help you.

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Pavilion G7 webcam not detected.

  Hello, I have a G7-2051SA Pavilion on W7 64-bit and webcam does not work. I have the "Cyberlink Youcam" which, once the software is installed, I run, he "No webcam detected". Skype does not detect it either. I've updated the latest drivers and using tune has conducted an audit and update PC with all relevant software but I still get the error. I can't see a FN + option key or any which icon on one of the 'f' keys to allow.

  Any ideas please?

  Hello jerrydoco.  I understand that you get the error "webcam not detected."

  Recently, I made a post on solutions for this error.  Please take a look here and try to proceed as I pointed out.

  I hope it's useful and I hope you have a nice day!

• Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  Sony vaio webcam not detected sve15113enb... is this a hardware problem? SOS please help

  the imaging device is not on the list of the Device Manager... so I could not uninstall and reinstall the driver for the webcam.

  Help, please.

  Thank you.

  Hi NIKSY2K2,

  Please try to reinstall the Webcam Companion software by using the button help rebuild drivers for the camera.

  Nick-

• Satellite U500 - 1 DR series Notebook is not detected by the TOSHIBA site

  Hey,.

  My Toshiba Satellite U500 - 1DR Series notebook (Serial No. 1A058758R) is not detected by the automatic detection of TOSHIBA online system. When trying to get portable detected manually on the site, I stopped fingd the model (Satellite U500-1 DR) is listed in the list of available templates or models. I'm unable to download software/updates on the site.

  Hello

  If the work of autoetection doesn t you can find manually but not not using the name model but the model reference number. Your DR U500-1 has part number PSU9ME-xxxxx then please check under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp Toshiba download page and look for Satellite U500 with reference number or model number short PSU9ME.

  Can find you it?

• Satellite M30x + Win7: DVD not detected by the CD/DVD drive

  Hello

  I use a M30x since 2004 with its CD/DVD drive * a S mat. DVD-RAM UJ-831
  When I was with Windows XP, I have never had problems to read or write on CD, CD - R, DVD, DVD - R or DVD - RW. But recently I installed windows seven, and since that day the drive won't recognize the DVD. I can still read and burn CDs and CD - R. I'm burning the same Virgin DVD-+ R/RW as before, but the drive won't detect them. Those I have already burn are not detected or the other.
  My computer says that the CD/DVD drive work properly and drivers are up to date.
  I tried to clean the lens, but nothing has changed. And I tried to reinstall the drivers, but I could not found for windows seven.

  Thanks for the help.

  Hello

  Have you tried to delete the upper and lower registry Filters >
  Pleas check it!
  http://support.Microsoft.com/kb/270008/en-us

  You will find the registry key where filters must be removed.

• HARD drive not detected in the BIOS on Satellite A215

  Hi all

  I could use to solve this problem: bought this laptop computer without a disk of the auction. Installed again 2.5 inches HDD SATA 250 GB, which was not detected in BIOS and also not detected when using a MS Vista installation disc. When trying to install Vista, get a message no drive seen HARD and demand for pilots.
  I flashed the BIOS with version (2.0) of lates without problem through the CD drive, but still no detection of HARD drive.

  The drive partitioned and formatted NTFS without problem by using another computer and USB SATA adapter using the command line method. Just for additional verification, I went on the new HARD drive to an extra 2.5 "SATA HDD used for backups, but that the HARD drive has also not been detected.

  It is not a "compatibility" option in CMOS to select SATA or Auto, etc..
  There is not a second HDD, so this isn't a question of slave/primary. There are no jumpers on the new HARD drive.
  Set the CMOS settings 'by default' does not solve the problem.

  The SATA connectors on the HARD drive and laptop computer are in perfect condition.
  Also, the drive is not detected on the laptop connected via USB to SATA Adapter, but of course there is no OS installed to support this connection.

  In any case, I just can't come up with any more ideas to try.
  Any suggestions would be really appreciated!

  Best,
  Glenn

  Hello

  The BIOS should recognize the HARD disk even if the SATA mode would be compatible or AHCI. This should not affect the recognition of the HARD drive.

  You said that you have tested the condition of the HARD drive and it's ok, so I guess that it s no disc HARD question.
  Hmm, you could try to format the HARD drive once more and then connect the portable computer HARD drive.

  Another idea: Remove/Disconnect the CD/DVD drive and then connect the HARD drive to the SATA connector.
  If it does not, then I recommend to test another HARD drive, otherwise if the new HARD drive would not work, then a SATA controller may be defective.

• Digital mp3 player is not detected on the computer.

  Original title: my phone dosnt recognize my drive digital mp3. When I plug it into the usb port do not get an icon. so I can't load music can help you

  MY LAPTOP DOES NOT RECOGNIZE MY MP3 DIGITAL PLAYER. WHEN I PLUG IT INTO THE USB PORT I DON'T GET THE USUAL ICON. SO I CAN'T DOWNLOAD MUSIC ON IT. CAN YOU HELP ME PLEASE

  Hello

  Thanks for posting your question in the Microsoft Community Forums!

  If I understand the question, digital mp3 player is not detected on the computer. Please let me know if this is not correct.

  Before I continue with the troubleshooting steps I may need a few more details to better understand the issue.
  1. what operating system do you use?
  2. do you receive any error messages?
  3. are you having the same problem with other USB devices?
  4. have you tried plugging the machine into the other USB Ports?
  5. did you of recent changes on the computer before this problem?
  6. What is the serial number and model of the MP3 player?
  Method 1:
  We will first try to plug in other USB Ports and on another computer to make sure that there is no problem with the digital mp3 player.
  Method 2:
  If the first method does not resolve the problem, run the hardware and devices Troubleshooter and check if it helps.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
  For more information, please see the link.
  Tips for solving problems of USB devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  Respond with the required information so that we can help you solve the problem.

• DVD rom not detected in the Bios & windows

  Mr President, in my computer the dvd rom is not detected in the Bios & windows. Send me a PSE with solution please.

  Hello

  1. which version of the windows operating system is installed in the computer?

  2. What is the brand and model of the computer?

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756

  (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  I also suggest you to connect with the computer manufacturing and update drivers for BIOS.

• Need still restarts desktop Acer Aspire - keyboard not detected at the login screen

  Hello

  I have Acer Aspire ATC-605-UR13.

  In the course of the last 4 weeks, suddenly the keyboard is not detected at the login screen. The mouse works.

  Still, I have to restart to make the keyboard work.

  Any idea of what caused it? Perhaps any software installed that do?

  P.S.: Btw, I tried a new keyboard, the same behavior. I have concluded that this is not the keyboard.

  Thank you!

  This problem has been reported after that install some recently released update of windows... Currently the ability to perform a restore of the system to an earlier date. You can also try to uninsatlling updates of windows manually from Control Panel > windows update.

• HP X 360: hardware virtualization enabled in the BIOS but not detected by the installation of Intelhaxm.exe

  Hi all

  I'm trying to get Android studio works on my 360. Everything is fine until you try to run virtual device/emulator.

  This does not work because the Virtual Machine is required. When I looked in the BIOS I was surprised to see this small handbook has the functionality that has been disabled.

  I now activated but still not detected by the software. Can anyone help with this?

  See you soon

  The problem was Avast antivirus. I uninstalled and hey presto, intelhax went very well.

• Video card GeForce GTX 660 not detected by the motherboard Windows 7

  I recently upgraded my PC with an Asus z97 - a motherboard and processor Intel i5 4. After the reinstallation of Windows 7, I was able to get a signal from my video card 660 geforce gtx for a few hours. After Windows install several updates, however, I am unable to use my video card without receiving an ENTRY NOT FOUND both of my monitors. My video card is also not appearing in Manager devices, or BIOS and use rather Intel HD Graphics. Cause of the undetected video card, I am unable to install the latest drivers for my card and I have no idea what to try next. I also made sure my current diet provides enough power for the card. Is powered without a doubt the map because the fans spinning, I'm positive that I've attached all required power cables, and the card is inserted completely into the motherboard. I tried all PCI-E ports in my motherboard, but it continues to not display. I tried to install the drivers manually, but the video card should be detected before this is possible. Any help would be greatly appreciated.

  My specs:

  ASUS card mother Z97 - A

  Videocard GeForce GTX 660

  Intel i5 processor 4

  8 GB RAM

  700W ATX power supply

  I should point out that I have tried almost every technical troubleshooting that I have met, with the exception of disabling Intel HD Graphics. I fear that if, due to there not being any trace of my video card in the BIOS and Device Manager, if I disable this will also lose signal from the motherboard of DVI and HDMI, ports that are what I currently use.

  Hello

  As the graphics card is not detected by the motherboard, you will need to contact Asus for more help on this issue. You will need to check if the graphics card is detected in the BIOS or not, if not then contact the computer manufacturer is the right point of support.

  Support from Asus: http://www.support.asus.com/

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."