Built in webcam not found on the computer.

Hi, back for a while that I had to have it replaced my computer screen. After that it has been replaced, my webcam not working not. He said that there is no webcam. Before that the screen had to be replaced, it works beautifully. What could be the problem and how to fix this? Thank you for your help.

Hi Randalynf,

Please answer a few questions to refine the question.

1. What is the brand and model of the computer?

2. When you say "screen is replaced", hear you screen has replaced for a new one? What was the exact problem with the monitor?

3. what happens when you try to access with the Webcam software that came with the computer?

This problem normally occurs when there is no problem with the driver for the Webcam device software.

I suggest you follow the steps below to see if that helps.

Method 1:

Step 1: Find material webcam

Take a quick moment to visually inspect the top of the screen of your computer. Look closely, you should see a small lens at the top in the Center, if your computer is equipped with a webcam. Some models do not come with a webcam and the area where the webcam would normally be resident is replaced by a small plastic cap.
Often, there are small holes near the top center of your screen. These holes are for the microphone or other sensors and do not contain any webcam.
  • If your computer lacks a built-in webcam, you must use an external USB webcam.
  • If your computer is equipped with a built-in webcam and you can't use it, go to step 2

Step 2: Find and use the Webcam software that came with your computer

Try to access the webcam that is preinstalled on your computer.

If you can't find and open the webcam for your computer software, then go to the next step.
If you have found the software of the webcam and it opens and you see a picture, then finished. Your webcam works.
If you found webcam software and it opens, but you can't see the video in the main display window, restart the computer and try again.
If the problem persists, use the troubleshooting section "video does not appear in the webcam software.
Method 2:

If you are able to find the Webcam on your screen and you cannot view the video using the software installed, you may need to update the Webcam drivers for more later.
Read the sections "If you have problems with your webcam' in the article and check the results.»

Hope this information helps. Response with status so that we can help you.

Tags: Windows

Similar Questions

  • built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

    I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

    Any help to fix this would be greatly appreciated.

    Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

  • Product not found on the computer code

    When you try to use Adobe Acrobat Pro XI for the first time, he asks me to enter the serial number.  When I do, it tells me that the serial number is valid, but a qualifying product code is not found on my computer.  I also noticed that my product (Adobe Acrobat Pro XI for Mac) is not on the drop-down list next to the serial number entry box.  What should do?

    If you did not already have a version of Acrobat and the software says it can not find a code of qualification I can only deduct that you purchased a version upgrade when you would have to purchase a full version.

    Because this code yiou speaks of maybe not what I guess it is, I suggest you contact Support Adobe directly through chat or by phone to solve your serial number or activation number.

    Here are some links to help get in touch:

    http://www.Adobe.com/support/chat/ivrchat.html

    http://www.Adobe.com/support/download-install/supportinfo/

  • Re: Unable to use webcam - not found in the Satellite L670 Device Manager

    Hi, I'm french, sorry for my English.

    I can't use my webcam. not cam in Device Manager.
    I have download the latest drivers and it installed.
    I looked in the bios, cam is on, I am trying to turn off / restart / turn on. Updated BIOS updated.
    facial recognition work to, say "use by another program or not found" something like that.

    Can you help me?

    Thank you

    Hello

    It s not recognized in Device Manager?
    You have a few unknown devices in Device Manager?

    The webcam should be included under point: imaging devices
    You should see peripheral USB video.

    You see that?

  • built-in webcam not detected on the XPS 17 (L702X)

    8.1 Windows 64-bit, the built-in webcam does not appear in Device Manager. Any software that uses webcams does not detect the webcam. He worked until recently. Drivers & downloads in support Dell offers no help because no driver for the webcam. It seems to be a bit stupid because he recommended me to install some things already installed. Or even a few years nVidia graphics card controllers! 'My Dell' application does not offer the posibility to test the webcam, just the microphone. Therefore, none of the solutions I've read here are of no help.

    fjmv,

    Recently install you / reinstall the operating system? If so, have you installed the Dell System Software (if applicable) and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

    Windows 7/8 is supposed to provide the drivers of webcam for most Dell computers. If you system needs webcam drivers, go in driver downloads & enter your service tag, and then select your operating system. If your system is in need of drivers for the webcam, they will appear under entry.

    (Windows 8) How to make the webcam work with the help of this youtube. You must open the firstcamera app, and then click settings in the charm bar to see where you can give the app permission to use the webcam.

    Try to read...

    Troubleshoot the Dell Webcam and the Dell Webcam Central software

    You can try this file, also known as the Dell Webcam Central.

    Create a new unrestricted user account and try the webcam. The webcam worked?

    If Yes, sign out and sign back in to your account and try the webcam. The webcam worked?

    If not, then the webcam is detached from the motherboard, usually close to the webcam

    Rick

  • Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

    Original title: computer laptop (Windows 8) starts do not

    Laptop: Sony Vaio

    Processor: core i3 with 4 GB of memory
    Operating system: Windows 8
    Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
    I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
    How to solve this problem?

    Hi Sunil,

    Thanks for the reply.

    I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

    Get help from Microsoft Windows activation

     

    https://support.Microsoft.com/kb/950929?WA=wsignin1.0

    Let us know if you need assistance.

  • Satellite A350 - Microphone not found on the computer

    I recently got the computer and functioning perfectly, except the microphone does not work.
    I checked the drivers, and I have 1 thing that says that we don't know. I looked at the list of drivers on the Toshiba site, and I don't see what it would be.

    Any ideas?

    Sorry, but if you use the notebook with unknown device to factory settings can not be there.
    Recovery image contains all the necessary drivers and by default the mic settings should work fine.

    How you tested the mic feature?
    By the way: what Satellite A350 exactly do you have? (A350-xxx)

  • Not found on the computer boot device 250 hp laptop

    Hi, I have problems with starting my laptop. When I turn it on it comes up with the found boot device, please install an operating system on your hard drive, hard drive (3F0), F2 system diagnostics. Any ideas why this happens?

    Hello

    If you have the copy of the invoice, you can contact HP Support on the phone and get the security number set. Also since the disk HARD is not get in the BIOS. Once the question of the guarantee is fixed, you can ask them the HARD drive replacement.

    http://WWW8.HP.com/us/en/contact-HP/support.html

  • USB flash drive has not not found on the computer

    Original title: Flash Drive operations

    They gave me a flash driver allows to display certain information, I put it in my USB Port, it lights up, but nothing appears on my screen to indicate what he. I went to the computer, but do not see

    any removable device for a flash drive option. How to open this to display information on the USB

    Hello

    1 have USB flash or external drives readers have worked on your computer?
    2. what operating system is installed on your computer?

    Method 1:
    You try to run the Fixit.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/mats/hardware_device_problems/

    If you are using Windows 7, you can follow the methods mentioned below.
    Method 2:
    Run the troubleshooter of material and check what is happening.
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

     
    Method 3:
    You can check under diskmgmt.msc, whether or not the USB received a drive letter. If not, then try to assign one and check. Follow the steps.
    (a) open computer management by clicking the Start button, clickControl Panel, clicking system and security, clickingAdministrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    (b) in the left pane, click disk management.

    (c) if the flash drive recognized in disk management and if there is no drive letter assigned, I suggest that you do a right click on the drive and assign a drive letter.

    (d) click the drive to change and then click change drive letter and paths.

    Do one of the following for the assisgn drive letter.

    • For letter an if it has not already received, clickAdd, click the letter you want to use and then click OK.
    • To change a drive letter, click change, clickassign the following drive letter, click the letter you want to use, and then clickOK.
    • To remove a drive letter, click Remove, and then clickYes to confirm that you want to remove.

    Check this link for more information:

    http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

    Method 4:
    You can also check in the Manager of device if the device is in the list.
    a. connect the device to the computer.
    b. to open Device Manager, type devmgmt.msc in the start search box and hitEnter.
    c. check if the device drive is listed.
    d. in Device Manager, expand the device listed in the device list.
    e. If the device is listed, right click on it > click Properties.
    f. in general, look under device status for the message. After back if there is no error message.
    See also:
    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Method 5:
    As all devices have same also have USB device associated drivers. Appropriate sometimes drivers not detected after initial installation so reinstalling the drivers can fix the problems.

    You can check after uninstalling and reinstalling USB drivers if you are able to connect. You can disconnect all USB devices and then perform the following steps:
    (a) click Start and then click Control Panel.
    (b) click System and Maintenance, click System, and then click Device Manager.
    Note: If the control panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".
    Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.
    (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.
    Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.
    If you are still having the same problem then you can check the device USB drivers updated using windows update. See the following link for assistance.
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

    I hope this helps.

  • Bluetooth is not found on the computer.

    I have a Kinivo bluetooth dongle (BTD-400 Bluetooth 4.0 USB adjust) and a Microsoft Bluetooth Mobile Keyboard 5000. Currencies are matched, this morning and works very well. The battery is dead on the keyboard. I replaced the.

    Since the replacement of the batteries on the keyboard, bluetooth on the computer system cannot discover the keyboard.

    I paired the keyboard to other bluetooth devices I own, so I don't think that's the problem.

    I uninstalled the bluetooth driver and reinstalled.

    The keyboard is in discovery mode. I right click on the bottom right of my screen bluetooth icon and click on 'add a device '. He said that it is "searching for legacy...» Make sure that your device is discoverable. "but nothing happens.

    Any suggestions?

    Hello Andrew,.

    Thanks for posting your question on the forum of the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check.
    Reference:
    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    If this does not help, then use method 2.

    Method 2:
    Please use the suggestions provided in this Microsoft article knowledge based and check.
    Reference:
    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398

    Additional information:
    Connect a Bluetooth device that are neither require a TRANSCEIVER
    http://support.Microsoft.com/kb/952818

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  As one

    I found that if it becomes necessary to use time machine to return to an earlier existence to reinstall the iphoto library, if for some reason, you lose lose, then when you try to synchronize your ipad is not recognized by the computer.  So when you try to synchronize the pictures, they are all removed from the ipad and trying to reinstall everything again.

    This may or may not work immediately.  In my case, only half the photos have been installed, and then the error message came that the rest of 9000 can be installed.

    I contacted Apple support team who has made various suggestions.  Subsequently clicking on a photo list in iTunes were all going again and pictures of 9000 then installed.  When I asked the support team what could happen I was told that it was a "glitch".  I don't like seeds they mean that there could be an error in coding somewhere.

    Here me again.  I use an iMac and iPad.  I don't know why XP and iPhone came.

  • The diagnostic image not found on your computer

    We had this HP computer for about 3 weeks and I tried to create a backup disk according to the instructions for "tune up your computer.  I get the same error message "the diagnostic image is not found on your computer.  Please contact HP support.  Our computer is HP x 2301-suggestions anyone?

    OK, I found the desktop HP Pavilion HPE h8 - 1250a.

    You must have HP Vision Hardware Diagnostic Tools installed on the computer when you bought it. With it, you can make the Diagnostics bootable cd.  Search for HP Vision diagnostic material in your programs on the start menu. Or you can type it into the search box of the start menu and it will appear if installed.

    If it is not installed or you think you may have removed it it can be re installed using the Recovery Manager.

    http://support.HP.com/US-en/document/c03132174=

  • Error message "the 421 ordinal not found in the dynamic link library urlmon.dll" whenever I start my computer

    Original title: 421 ordinal could not be located in the dynamic link library urlmon.dll

    I get this error every time I start my computer: "the 421 ordinal not found in the dynamic link library urlmon.dll.

    In the control panel select Problem Reports and Solutions (problem of type in)
    The START searchbox), go to the history of the problem, your mistake right click and choose
    Check the Solution.
     
    In administrative tools, choose the reliability and performance monitor and
    Click on MonitoringTools then the reliability monitor (type of reliability in research
    at startup). This list is a chart of the software installs, uninstalls, Windows
    updates and crashes by date. See if your plant started to occur after
    you installed or uninstalled something.
     
    You can clean boot
    Troubleshooting http://support.microsoft.com/kb/331796
     
    Download http://www.nirsoft.net/utils/shexview.html
    Disable all non-microsoft shell extensions (to explore) and reactivate a
    by so this can help.
    --
    ..
    --
    "Mr_Xtatic" wrote in message news: 63562fcd-7837-420-b-84e0-854170dfae5c...
    > I get this message error everytime I start my computer: "the ordinal 421.
    "> could not be located in the dynamic link library urlmon.dll"
     
     
  • How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

    Go to the Toshiba support site and search page of your PC/computer laptop.

    Download and then install the last set of specific drivers for W7.

    See you soon,.
    Jerry

  • Could not load the LR 6 on my laptop - I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."  I downloaded, from the Adobe Web site and given the serial number when I bought L

    I'll put up a new Macbook Pro the retina, bought this week, and try to install the copy of LR 6 I bought in September 2015.  It is currently loaded on my old Macbook Pro.  I understand that my license allows me to install this on two machines;  This is particularly important now that I move from an old machine to a new one.

    I downloaded the complete file of the LR6, but when I try to install, I get "update serial number: serial number you provided is valid, but calling it a product was not found on this computer."

    I gave the serial number under my account on the Adobe website and delivered when I bought LR 6 September 2015.

    It is said to "Select a product", but only gives me options of Lightroom 1-5, not 6.  My new LR 6 license is useless just 6 months after purchase?

    I opted to buy 6 LR on perpetual license rather than a subscription monthly CC, as my country's currency is devaluing rapidly and I need to be able to afford access.  But now Adobe does not seem to recognize the validity of the copy that I own.  In fact, it is difficult to find a reference to LR 6 on the Adobe web site.

    Can anyone help?

    Thank you

    It shows the message you have purchased an upgrade license, and it asks you to select the older version that you upgraded and provide older version serial number as proof that you are eligible to use the upgrade.

    Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

    http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

Maybe you are looking for