Burn a CD with Windows Media Player

I tried to burn a cd with windows media player.  I think that it is version 11.   I put the songs I want to burn on the right side where it says to put them.  I use a cd cd - r Phillips.  He'll burn 3 or 4 songs, and then eject the disc.  I tried several times and it does every time.  Any advice on how to burn the entire list of songs.  There are 15 I wanted to put it on disk.  And it's an 80-minute drive, so there is a lot of time on them.  I lost a few disk already so any advice would be appreciated.

Thank you

Rita

you have to 'turn off' the ' auto eject and auto burn / rip "feature for your cd device.

in this way the cd will stay "unburn" and can accept more files.  later, when you have copied all the files on the cd, then you can manually run a ' burn / rip.

try to go to the menu bar of media player file.  then, under Tools > options there should be a tab to customize the "rip" where you can change the ejection and extraction methods.

regarding as to why you seem to only be able to copy multiple files at the same time, it is probably due to low resources on your system.  Maybe you are low on memory or disk space when you use the media player.

so, you could try to just use the Explorer to transfer files on the cd.

You can open the Explorer and then find the folder that contains your music / song files.   then as with any file, you can drag and drop them on the cd or use other methods that you want to copy files from one place to the other.

also, most computer come with specialized software that is designed for your device to computer and cd model.  This software will be has features to copy files to the cd, and will also have the necessary controls to fine-tune the device cd and windows to play and the extraction of files.

Finally, it has been my experience that about five years of cd home-made, even if you buy the best cd for recording as those made with layers of gold and those with false promises that they last forever...

Unlike the cd music that we buy at the store, the method that we have with the computer is not industrial strength and something happens to the layers inside the House made conference that degrade over time.  I have studied this issue carefully and I just to let you know about the phenomena.  (I almost lost some one of a kind songs where the group no longer exists or their albums.  I actually have the only copies of these songs in particular in the world)

in any case, certainly keep copies of your music on the hard disk. You can also store copies of your music on the site of skydrive from microsoft for free.

Tags: Windows

Similar Questions

  • Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

    Hello

    I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

    Rick

    original title: burning a CD problems

    Hello


    (1) what version of Windows Media Player do you use?
    (2) what is the model of your CD burner?
    (3) you have the latest drivers for the CD burner?
    (4) what type of file you are trying to burn?
    (5) you receive error codes?
    (6) what version of the operating system is installed on the computer?
    (7) we get to a particular file?
     

    Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
     
    Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
    I hope this information helps!
  • How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

    Original title: How can I fix C00D199F error code

    Error message when trying to burn a cd with Windows Media Player

    Hello

    1. what version of Windows Media Player do you use?

    2. the specific issue of burning CD using WMP?

    3. What is the exact full error message?

    4. what you are trying to burn?

    5. is the specific question on the disk?

    Method 1: You can run the fixit available in the link below and

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

    Method 2: Clean the disc

    Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

    Select a slower recording speed and check if that helps.

    1. in the Tools menu, click Options, and then click the devices tab.
    2. in devices, double-click the CD burner, and then click the recording tab.
    3. in the write speed list, select a slower speed.

    Method 3:

    Perform the clean boot and check:

     

    http://support.Microsoft.com/kb/310353

    Follow the above article.


    If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

    Reference: Burn your own custom CDs

    Hope the above information is helpful.

  • How do I burn a cd with windows media player and have not any second 3 breaks inbetween the songs?

    How do I burn a cd with windows media player and have not any second 3 breaks inbetween the songs?

    In the following FAQ... scroll to the bottom for...:
    "Why are there gaps sometimes long between songs on the CD I burn?

    Windows Vista - burn a CD or DVD in Windows Media Player:
    Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    The free software CDBurnerXP has an option to burn a
    CD music with or without addition of gaps.

    (if the audio has static air at the beginning or at the end...
    which will need to be deleted manually with an audio
    Editor-in-Chief).

    (FWIW) It's always a good idea to create a system
    Restore point before installing software or updates)

    CDBurnerXP
    http://www.CDBurnerXP.se/
    (Yes, it works on XP, Vista, 7)

    CDBurnerXP to make Audio disc
    http://CDBurnerXP.se/help/audio/compileaudio

  • I can't burn a CD with Windows Media Player.

    I can't burn a CD using Windows Media Player. I use a Sony CD - RW 700 MB and the latest version of Windows Media Player.  My computer recognizes it as a blank CD, I can create the playlist to burn and when I hit the button to burn, Windows goes through the motions of burn the disc, but when I re-read the disc, there's nothing there, it's always a blank disc.  The same thing happens with itunes.  I tried to use a blank Memorex CD - R disc, but my computer will not even recognize it.  I burned the disks before using Windows Media Player.    Help?

    Hello

    Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of
    themselves at the start because they will be competing for resources. This does not mean that this issue has been
    caused by those, however, it's a possibility depending on which and how many you have installed.

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

    Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

    CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
    tolerances. They may be delivered, but it is generally more economical to replace the disk.

    Several good info here:
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
    http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

    -------------------------------------------------------------

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    After the foregoing:

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The DVD player does not work after installing Windows 7
    http://support.Microsoft.com/kb/975270/

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry settings for your
    CD/DVD drive someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays
    all devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • When I try to burn a video with windows media player, that it will not automatically to the window where add item option is available. Why?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    You try to burn a video DVD? If_yes_that is not supported
    by Windows Media Player, try using Windows DVD Maker.

    The following items may be worth a visit:

    Burn a CD or DVD in Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

    Burn a CD or DVD in Windows Media Player:
    Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    Windows Vista - Windows DVD Maker - burn video disc
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Not possible to burn a CD with Windows Media Player

    Windows Media Player in windows 7

    All of a sudden CD burning became a problem. After I insert a disc in the drive, a message appears indicating that I need to insert a disc or another message will specify that windows does not detect the cd or windows media player does not detect the disc. I don't know what is happening. I need help!  Thanks, Lindalooloo

    Hello

    Close WMP and all players and burn programs. Click with the right button on taskbar - task manager - process
    Tab - search for WMPlayer.exe and if it COMPLETED the PROCESS on this subject.

    Now stick to a CD and what happens?

    --------------------------------------------------------------------------------------------------------

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Windows 8 - can't burn the disc with Windows Media Player after you refresh the PC as well.

    Original title: cannot burn, was ok and then nothing, has had this problem for a week now, redrawn, changed registry, tried everything?

    Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

    Hi, Dorian,

    Thanks again for your response. Really, I apologize for the inconvenience caused to you.

    You can try these methods to solve the problem.

    Method 1: Run Windows Media Player Performance convenience store.

    Please follow the steps below to do so.

    (a) press Windows key + W keys on your desk.
    (b) write the Troubleshooting in the search box in the upper right.
    (c) select the Troubleshooting option after the search.
    (d) select the option of Performance of Windows Media Player .
    (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

    If the problem persists, use method 2.

    Method 2: Follow the steps in the link here and burn the CD or DVD.

    Burn a CD or DVD in Windows Media Player

    http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

    I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

    Thank you

  • whenever I try to burn a cd with windows media player, a blue screen appears and restart my computer, what should I do?

    whenever I try to burn a cd, my computer goes to a blue screen and restarting my computer, what should I do?

    Hello

    Most likely, there is a problem with the CD/DVD drive. You can burn a data disc when
    don't use not WMP? Close all programs, put in a flammable disk and use the data method.
    If burning a data disc works then you have any add-ons for WMP12?

    -----------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

  • Burning a slideshow on CD with Windows Media Player. Photos will not be displayed!

    I have a slideshow of photo .wmv (set to music with image transitions) on a computer that I am trying to burn a CD with Windows Media Player.  Photo slide show appear correctly on the computer.  However once on the CD, read in a CD player, plays the part of the music of the slide show, but none of the images are displayed.

    A grade side is that I have all of the original photo files.  But they are not embedded in the .wmv file.

    Any suggestions would be greatly appreciated.

    Thank you

    I have a slideshow of photo .wmv (set to music with image transitions) on a computer that I am trying to burn a CD with Windows Media Player.  Photo slide show appear correctly on the computer.  However once on the CD, read in a CD player, plays the part of the music of the slide show, but none of the images are displayed.

    A grade side is that I have all of the original photo files.  But they are not embedded in the .wmv file.

    Any suggestions would be greatly appreciated.

    Thank you

    =======================================
    Windows Media Player is not the application for this task.

    Take a look at the following article:

    Windows Vista-
    Burn pictures or videos to a CD or DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/d5f2879b-a59e-42FF-b454-1a203529c6631033.mspx

    If you're running Vista Home Premium or Ultimate... and
    to burn on a DVD-video .wmv file that should play
    in a free-standing DVD player... Take a look at the following
    Article:

    Windows Vista-
    Windows DVD Maker:
    Burn a DVD-video disc
    http://windowshelp.Microsoft.com/Windows/en-us/help/27a0225d-260e-4313-8a82-7c5253e93e6f1033.mspx

    If you have any other questions, let us know.

    John Inzer - MS - MVP - digital media experience

  • Not possible to burn music with Windows Media Player

    When I drag music from MP3 Rocket files to burn the pane in windows media player, they will not 'stick' nor will they stick to the music library... althoguh I did it before in the two front wings, why not more?

    OT: drag & drop

    Hello

    I suggest you try the steps from the following link to burn CD/DVD with Windows Media Player.

    Burn a CD or DVD in Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

    Additional information:
    Burn a CD or DVD in Windows Media Player: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    If the problem is only with MP3 rocket software, then I suggest you to contact the support of the rocket.

  • C00D10DA while trying to burn the tracks on a CD with Windows Media Player.

    Original title: C00D10DA - this code message come while trying to burn the tracks on a CD with Windows Media Player. This is not come on any other eponymic in my library

    Hi ceedog,

    Follow the steps in the link below and check the results:

    Windows Media Player Error Message help:http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=8004021B

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unspecified error when burning DVDs with windows media player DVD is empty when starting get coded, then when control burn error occurs and does not burn the disk. How to fix this?

    I get an error when I burn DVDs with windows media player. He asked correctly when I lad the DVDs that I choose to burn a dvd disc. Then I add my video fles she adds and lists. Then I hit burn and it starts to create the dvd disc. All my files are wmv files. The bar regarding % moves to 100% but captured along with burning the disc, he rejected and I get an unspecified error message. with just a button to hit, which will close the error box. The files don't burn the disk accordingly. The disc remains empty.

    Hi N2tjq,

    Are a. When you facing this problem?

    B. is - what happens with all DVDs?

    C. recent changes made on the computer?

    I firstly you suggests to save the project to your computer, and then try to burn on a DVD at a slower burning speed.

    Choose a speed slower burn to your DVD recorder as follows:

    1 back to adding photos and video to the DVD page and then click on Options.
    2. in the DVD burner speed box, select medium or slow.
     
    Change-Windows-DVD-Maker-DVD-Video-settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

    If the problem persists, download the service pack 2 for windows vista on the computer
    How to obtain the latest Windows Vista service pack
    http://support.Microsoft.com/kb/935791

    See the link below:

    Error message when you try to publish a movie to a DVD using Windows DVD creation in Windows Vista: "unspecified error".
    http://support.Microsoft.com/kb/949281 
     
    For more information, please see the links below:

    Burn a DVD video disc
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

    Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

    If you use windows media player, see the link below:
    Burn-a-CD-or-DVD-in-Windows-Media-Player
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player
     
    Previous post: the result.

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Burning CDs with Windows Media Player in Windows 7. "Error: connect a burner and restart the player.

    Original title: CD burning with Windows Media Player in Windows 7

    When I try to burn an audio CD with Windows Media Player, I get the message "connect a burner and restart the player.

    I am able to burn audio CDs using ITunes, so I don't think that my CD/DVD burner is defective.

    Thanks for your help.  The "fix it" has not worked, but I checked the settings of my Nero 8, Nero Toolkit, Nero Burn Rights program, and he was the one who said "everyone has burn rights" or "nobody burn rights.  When I changed the option to "everyone", everything started to work properly.

  • No reading DVD with Windows Media Player

    WMA crashed

    I used to use Nero on my old computer. I built a new computer and bought Vista and liked the use of Nero I installed it on Vista. During the installation it windows warned me that there is perhaps a conflict if I installed it. I went a head with him and of course, there was and nero would not work. I tried to uninstall it and was able to complete the removal of the program, because it has a conflict and stops. At this stage the WMP always worked very well. Recently, I installed a DIVX player... not by choice... I wasn't thjought I DL update or something, not a media player and pay any attention to any. So I removed the player and now I can't watch a DVD in my media player more. He tells me that windows media player has stopped working. I send the reports to help set and have nothing in return as in to solve the problem

    What are my options? Thank you!

    Hello casey_,

    Thank you for your response.

    In addition to the Bindu response, you can also try to perform a restore of the system to an earlier point before the installation of the program, and then check the issue. For more information about the use of system restore, please see the link below: System Restore

    If the problem persists, please relay the error message received when you try to play a DVD with Windows Media Player, and if the problem occurs when you try to play the DVD or single.

    You can also run the following diagnostic tool to diagnose and repair problems with your CD or DVD drive trying to read or burn media.

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Can you still find the 'theatre' on a song?

    I remember back when iTunes was relatively young (around 2006) allowing you to be able to read how 'theatre', a song in your iTunes library and you may even sort the pieces by the amount of plays. In addition to the playlist 'Top 25 most played' (whi

  • I NEED TO DOWNLOAD THE CLOUD FOR MY NEW COMPUTOR

    I NEED TO DOWN LOAD I TUNES TO MY NEW COMPUTOR WHICH IS WINDOWS 10 COMPUTOR IS A PC THANKS.

  • Need to clear my Cache of Safari, can't find it?

    I have the last Safari 9.0.3 I need to clear my Cache of Safar, where in my preferences of Safari in general I find him clear the cache? I can not find? Safar slows down my Mac Mini big time, regarding with my other web browsers I have, but don't use

  • Can I use as a point of access Wireless-G broadband router?

    I use a router broadband wireless Netgear as main router to the ground floor and connected to the internet. I connected an access point wireless of LinkSys (WAP54G) as a wireless Repeater. Same SSID however, I turned wide dissemination. My office ups

  • Find a progrm online file

    I just replaced windows Vista SP2 on my desktop with Windows 7, deliberately to start everything from scratch.  On Vista, I had an outdated program called Microsoft PictureIt, which I can't reinstall now because I lost the disc. However, I have it on