'Burn' start does not

I followed the instructions of Vista to bury a music CD... moved the files 'list of details' for "Burn list' then tried clicking on the button"start burn", but nothing happens! When I pass ANY other element on the page, it puts in evidence showing that I can click on it, but when I scroll the button "start burn"... nothing. Any suggestions?  Thanks in advance.

Hello Arbym,

Thank you for using the Microsoft answers Forum.

This problem can sometimes occur on the computer that you are using does not have or does not recognize a device compatible burning. I will consider that you have checked your drive and have found that it is in good working condition. The next thing would be to check and ensure that you do not try to burn too much data on the CD. If you have added songs more than what fits on the CD then the burn button will be grayed.

Try these suggestions and let us know what happens.

Judd
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Windows media player will show it's extraction and burning, but then the burned cd does not play?

    Windows media player will show it's extraction and burning, but then the burned cd does not play? Used to work properly, then a few days ago decided not to make a playable copy.

    Your setting got changed if you don't burn it as audio. This is the setting you need to change...

    Click the dropdown arrow in the "burn" pane and select "audio disc" and you should be ok again. R

    (You will need to start over with a fresh blank disc).

  • information store service Exchange starts does not automatically

    information store service Exchange starts does not automatically

    Post in the Forums of Exchange Server:
    http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

  • After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says "ScreenSaver:Photo screensaver.scr - unable to locate component".

    Original title: screen saver does not start because MSVCR100.dll was not found

    After the installation of Windows 'important' 3 updates my screensaver started does not. I get a message that says:

    ScreenSaver: Photo screensaver.scr - unable to locate component.

    This application has failed to start because MSVCR100.dll was not found. Reinstalling the application may fix this problem.

    The screen saver starts after you close the error message. I've never had a problem with my screen saver up to that after I downloaded updates. I don't know how to reinstall the application. I tried Windows Fix - It Solutions, but it does not work. He repeated to me that it was a mistake.

    Help, please. Thank you.

    Hello

    It didn't reinstall the ATL update, it reinstalled 2005 Redistributable. So now, I have 2005 and 2010 x 86 both. And it says that two dates installiation are two days after I installed the 2010. I know 2005 and the update was uninstalled, because I checked after restart the computer and before you install the 2010 version. Very curious.

    But my Screensaver works and access to the camera seemed to work after uninstalling / reinstalling the software. So, good. Thank you.

  • My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

    My ORB start does not, he will have all the features and the icon disappear, just to the left of the word it

    even using restore window can not solve the problem, I use windows 7 pro, this happen after the update I have install on September 24, 2012

    Hello

    1. What is the KB (Knowledge Base) number associated with the update?

    2. the problem persists only with ORB start?

    Method 1: Make the SFC (System File Checker) scan and see if the problem occurs.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    Method 2: Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

    Microsoft safety scanner

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

    Hope this information helps.

  • Why the cd dvd burner motor does not start but will start to manual

    I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

    Hello

    1. it worked earlier? If so, remember you have changed your computer?

    2. what happens when you insert a CD or a DVD?

    Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

    Note: click the fixit to activate autorun.

  • Satellite A300D - 21(d) - burning software does not recognize my optical drive

    Greetings,
    I've updated preinstalled Vista Home with Vista Bussiness x 64, and since then, I have problems with my optical drive. Notepad is a month old.

    It reads CDs and DVDs without problem, but when I start the burning software (Toshiba Disc Creator and Burner XP Pro), it can not read my camera. BurnerXP Pro it says 'no compatible drives', and Toshiba DC I first get a few repeat mistakes (32007C-26-00000001, 32019-26-00000001) and when I click on 'disc information', it has no options in the drop-down menu "Drive".

    When I insert the blank disc, Windows gives me an option to burn files using Windows, although I have not yet tried.

    I tried to reinstall the drivers, but it does not help. My firmware is also updated.

    The device is TSST corp CDDVDW TS - L633A Ata Device.

    Any help is welcome, thanks!

    Hello

    Friend of me has had a similar problem that he couldn t burn CDs or DVDs more. He was using the Nero software and not from Toshiba or CD Burner XP, but he removed the upper and lower filters Windows registry and after this all worked.

    Here is a Knowledge Base article Microsoft how to remove:
    http://support.Microsoft.com/kb/314060

    I hope this works for you also give us feedback, please! :)

  • burn CDs does not work

    I haven't used my option 'burn' for a while and found that now when I insert a cd it is not recognized.  I don't receive any message the Windows option. This is for the audio and data.  I tried different physical disks, nothing helps.  Until a few months ago, I have not had any problems.  Does anyone have any suggestions?

    Thank you

    Hello

    You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
    Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
    correctly.

    Used speed, the actual brand of discs, burning and if file Live or mastered all come into
    play. A cleaning disc can sometimes help.

    Burning a CD
    http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

    Disc burning: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

    Disc burning tips
    http://Windows.Microsoft.com/en-us/Windows7/disc-burning-tips-for-Windows-7

    Should which CD or DVD format I use?
    http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

    Format a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows7/format-a-CD-or-DVD

    Burn a CD or DVD in Windows Explorer
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

    Burn a CD or DVD in Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

    Burn a CD or DVD in Windows Media Player: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    Change settings for burning a CD or DVD in Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

    Burn a CD or DVD in Windows Media Center
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Center

    Burn a DVD-video using Windows DVD Maker disc
    http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

    How to burn DVDs with Windows DVD Maker
    http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker

    Close or finalize a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows7/close-or-finalize-a-CD-or-DVD

    ----------------------------------

    Excellent Forum for help with programs and CD/DVD problems
    http://Club.myce.com/

    ==========================================================

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    ==========================================================

    References to Vista also apply to Windows 7.

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
    Setup after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and the
    correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Portege R600-12Z long delay of start & does not recognize DVD dirve

    I have been using my Portege R600 running windows XP for about 14 months now and recently FOUND that he began to take 1 to 2 minute wait before starting the sequence start or resumption after hibernation. Now, I have discovered that the DVD drive (5100 DVD - RW supermulti drive) does not work: in the Device Manager it shows as unable to start; If I try to boot from the drive of CD/DVD (F8 at first upward, or the definition of the boot priority) it does not take into account the CD and eventually get to the start of the HARD drive in any case. At the same time, the reader is actually superimposed a disc (it will open and close and will try to read any disc inserted). I've updated the bios (3.20) and all the drivers concerned I can find (although none seems to be specific for this drive). Any suggestions would be greatly appreciated.

    I should also mention that this replaced R600 actually an another R600 (one of the earlier and more fragile versions) on which I had exactly the same problem after about 10 months. I just unluckly, or is this a weakness of the R600 line?

    PMR thanks for your comments.

  • Toshiba 32RL938 starts does not correctly

    Hello

    I have been the owner of a Toshiba Smart TV 32RL938 for almost 6 months now.

    I am very pleased with the TV, except for a problem which I think happened after an update of the firmware (dated June 1, 2012, the only one I've ever had).

    The TV in sleep mode for a few minutes does not start correctly. The screen remains black, face and remote control do not respond. The only way to get the TV back working is to unplug it for +-30 seconds (even that doesn't sometimes).

    I tried to reset the TV via the parameters, but the problem persists.
    So I think it has to do with the firmware, but I can't find a solution anywhere.

    could you guys please help?

    Kind regards.

    Hi Boissevain

    I put t think its software problem, because in this case all television sets containing this firmware would be affected, but to be honest, you're the first person who reported something like that here in this community. So I guess that your question is NOT related to the firmware.

    As mentioned by donhe; If you can't get the firmware via network update, it means that this new version of firmware is not available for this model.

    In your case, I recommend you contact technician to check the TV

  • Satellite L70 - menu start does not work

    I currently have a laptop L70 that so far has worked well. But today my Start menu does not work & I get a 'critical error msg"asking me to sign... help someone

    This system is running?

    I guess there is some kind of problem in the system and I think you should check if a common troubleshooting system allows you to remedy

    First of all I recommend you to check if you can assign to the OS to the point of time at the beginning by using the Windows backup and restore option

    Your comments would be appreciated.

  • X 230 starts does not after replacing dc jack

    Hello everyone, I've replaced the dc Jack by the following materials repair manual, but the laptop does not start (zero response when you press the power button / stop) later. When the power adapter is plugged in, the battery light flashes three times, because of connection.
    My suspicion is damaged key board or could be the motherboard. Please advise on how to continue. Backup battery is has nothing to do with the starting of computer?

    In your case. There is a high probability that something is wrong with the keyboard. But it could be something else.

  • menu start does not display the recently closed programs

    I can't get the start menu to show all the programs that I recently closed, and this under the items added in the start menu, it shows the item titled my recent documents. I like being able to click on the Start button and see what I have recently been in programs.

    Hello

    What you specify is called list of the UPM (most frequently used programs list). The MFU list appears under the list of favorites on the Startmenu. This list tracks the frequency programs are used and displays them in order of the most used (on top) to least used (bottom).
    What exactly is your problem? This list is not displayed any program? or it shows some programs that have been used but does not add new programs to the list?
    Possible solutions:

    1.right - click on the Start Menu and select Properties. Under the Start Menu tab, click the Customize button. under the tab general , in the program section to ensure that the 'number of programs at startup' is not set to 0. If your required number is already set, then clear the list by clicking the clear list button. Now open some of your programs and check if the MFU list now programs or not.

    2. If she has not worked for you, so now you need to check your registry settings
    Open regedit (start > run > regedit > OK)
    Navigate to one of the following keys
    • HKEY_LOCAL_MACHINE-Software-Microsoft-Windows------CurrentVersion------policies-Explorer
    • HKEY_CURRENT_USER-Software-Microsoft-Windows------CurrentVersion------policies-Explorer
    Remove NoStartMenuMFUprogramsList & NoInstrumentation values or set zero.
    For more details, visit http://support.microsoft.com/default.aspx?scid=kb;en-us;292504

    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. http://support.Microsoft.com/kb/322756
  • Windows Defender won't start does not automatically, it's because I use AVG anti-virus software?

    I recently downloaded the free version of AVG v.9, which seems to work very well. However Windows Defender no longer seems work fine, normally this is an error message saying that it does not work and I have to manually start even if I set it to start automatically. Sometimes it does not start at all.  Is it a problem because I use AVG and I have to run Windows defender, while running AVG?


    I got appreciatte all boards.


    Thanks J.

    AVG and defender in the face of a conflict between them.

    And even if you change Microsoft Security Essentials, it will turn off Defender, because it has its own integrated version of Defender.

    See you soon.

    Mick Murphy - Microsoft partner

  • Destop duplicated with blank faces of desktop and menu files start does not

    Hello everyone.

    My administrator account suddenly started displaying more files on the desktop as is it duplicated. Duplicates are all empty and all files are unclikable even the icons on the taskbar. No option but the delete option does not even when I right click on the files.

    Also the start menu does not work. But with all this past in administrator accounts, the acct of comments works normally.

    Kindly help be cause it is rampant in my work.

    Thank you very much.

    Hello Isiok,

    Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

    Removal of battery or unplug all connections feeding for a while helps us to solve many of these minor problems. The reason for these problems are mainly due to the interference of the power locked in the connections. Remove all power cables, batteries, network cables, external devices etc. helps us by releasing the static locked between them. This process of liberation of static locking is known to be able to flee. It's great that you identified the problem and he's got this solved.

    Hope that answers your query. For additional assistance with Windows, we're always here for you. Feel free to write us back.

    Kind regards

Maybe you are looking for

  • Iceweasel maintains the connection but gets nothing

    using the jessie debian distribution, I have today improved iceweasel 31.8.0 - 1 ~ deb8u1 to 38.4.0 - 1 ~ deb8u1 on an amd64 platform.The old version was to have no problem alone, but the new version repeat myself some 'connection to AccountName"rece

  • Image capture does not recognize scanner

    I have three Macs. An old iMac (early 2008), MacBook Pro (early 2011) and a newly acquired iMac 4K retina. All are running 10.11.4. I have an Epson Perfection V370, who is about two years old attached to the new machine. She was attached to the old i

  • XPS8100 DVD player does not open

    I've been writing a series of DVD, eject them because they were written, and then insert a new.  At some point in the middle of one of the written word, the application reported an error to write and you leave.  I pushed the eject button, but nothing

  • Disable the startup sound.

    Original title: my system sounds are disabled, but the sound log - we play at full volume when restarting. How to disable or drop at least? Win7 32, Dell Inspiron 1525. Can I put down after he plays, but I use the computer when others are sleeping. I

  • Windows 7 Activation final problem

    I built my computer about 4 + years ago and installed Windows 7 Ultimate and worked fine until recently.  One of the disks on the raid disk doesn't have that I replaced.  Since, I've been making a problem of Windows Activation, I assumed that the pro