Burn to disc option does not appear when I select the file tab.  Can someone help me with what may be the problem.  I tried to burn a playlist on a disc.

Similar Questions

• KB955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  original title: Windows Update acts confused - kb955759 does not appear when I check the updates manually, but it appears with the yellow shield after you have enabled the automatic updates.

  I just reset my CMOS settings, writing zeros for my hard drive, repartitioned, reformatted and used the recovery cd Gateway system to get my computer to Windows 98se - factory settings, except at the beginning of the recovery of the system, when it says "press any key for advanced options," I pressed a key and then I unchecked all the default (3rd party) applications including Norton and left only 2 checked: "Updated USB Hub" and "Windows Shutdown Supplement," while nothing has been installed, leaving only win98.
   
  Then I used my disc XP Home (SP2) update.  I, immediately after the upgrade to Windows XP, installed "Office XP with Frontpage, Developer Edition", then Norton 2012 before never connect to the internet.
  Then, I connected to the internet and continuously update of Norton, before ever hitting the Windows Update page. The first thing I did then was to activate Windows, and then activate the office.
  Then I hit the update of Windows "button" that says "get all your updates in one place... upgraded"Microsoft Update".  I, then, just kept hitting the page update and restart, until I find the SP3.  Then, I took a break, until the next day.
   
  I have an ADSL broadband, with a Linksys EtherFast PCI card.
   
  Then I got SP3, which installed without any problems.
  So I just kept "microsoft continuous update" manually (and reboot), until there is no more updates - EXCEPT, I always uncheck Windows Malicious Software Removal Tool - which was the only screening at the final stop for the night.  I think that I ticked the box "don't ask me about this update".
   
  Then, in the morning, after you have enabled automatic updates, I noticed the yellow shield - Windows security icon (or whatever it's called), so I clicked on it and checked it was tellimg me was available [when I checked "Custom Install (advanced users)"].  What showed was 1 update - 955759 KB.
   
  After the problem, already at the reformat (months and months), see the yellow shield telling me there are updates available, which were already installed (before rebooting), I checked manually on the internet with IE 8, pressing alt, "T", "U".  There is no updated list.  Then I checked through my history of update (twice), and KB955759 had not been installed.
   
  My update setting is to let windows download ('important') updates, but let me choose when to install them.
   
   
   
  What is the right - Windows Update (NO update important reporting) Site, or the yellow shield (reports [a] kb955759 [update])?
   
  I can not yet confirm he is supposed to be an update for XP home kb955759, because I was unable to locate any detailed documentation on this 'thing' that protect the yellow safety seems to think is a significant update.

  Comment 1: To my rquest, a moderator merged your thread in the Sub-forum Win7 updates with your wire in the Sub-forum of updates of Windows XP 20 Feb-12, c. 07:50 UTC.

  Comment 2: If you will not contact the MS Support on this issue?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~

  Just for the heck of it, I have disabled the automatic updates, cleared my browser cache, checked manually, updates from microsoft (windows) and found none (with the exception of software malware removal tool windows [which I have not installed]).  Then, I turned the automatic updates on, and without even being connected to the internet, the yellow shield popped up with the kb955759 "update"...

  Repost...

  1. If you open Internet Explore (only!) to http://windowsupdate.microsoft.com and run a CUSTOM scan, KB955759 appears in results?... If so, you manage to install it and/or security updates available?

  2 after no. 1 above [<>], is the 'yellow shield' icon appears in the Notification area (on the left of your clock)?  .. and if yes, by clicking on the 'yellow shield' icon tells you that KB955759 or any other updates is ready-to-be-installed?  .. .and if so, you manage to install it?

  3 after doing 1 # & #2 above [<>], is KB955759 or any other updates offered as a ready-to-install update when you go off your computer?  .. .and if so, you manage to install it?

  ... I guess that clearing the browser cache does not erase 'downloaded' updates.

  Nope. If you want to clear the queue of the update...

  OPTION A:

  1. stop the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > (type or copy/paste) %windir%\SoftwareDistribution > click OK
  
  Open the download folder and delete its content
  Close the window.

  3. start the automatic updates service:

  Start > run > (type or copy/paste) services.msc > click OK
  Double-click automatic updates > click Start
  (Starting the service will take a moment)

  OPTION B:

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [don't know the titles, etc..]

  2. make disappear/close the Troubleshooter automatically pop up.

  3 repaired 50202 in DEFAULT modes and AGGRESSIVE. [1]

  4 reboot.

  Does anyone know how to determine if software mailicious removal tool is installed on XP? [source ]

  Check the located log file...

  C:\Windows\Debug\ MRT. NEWSPAPER <>

  Related...

  ... This leaves us with the malicious software removal tool don't appear not.

  I guess I'll have to leave "auto-update" (I often have less than 65 M of free memory left and do not have enough memory to msrt) and don't assume no other current error. [source; 17 Aug-11]

  It's no wonder that you ended up having to do a clean install of Win98SE & then upgrade to Windows XP again!

  ================================================================
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not updates installed in Add/Remove Programs list.

• He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  He repeats to me update failed and he said photo shop is installed, but does not appear when I search for it, how can I fix

  Nevermind I figured it

• Hi, my dvd player does not show on my computer and Device Manager. can someone help me?

  Hi, my dvd player does not show on my computer and Device Manager. can someone help me? HP dv6700z laptop.

  # It is now showing there either. Thank you.

• I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem?

  I have a problem with my shrink to a smaller size text, when I create a link. Can someone help me understand how to solve this problem? Here is the URL of the page where it happens. Spring Art tour

  Tamlyn

  Line 22 of your main document

  do-size: 14px;

  change that to

  font size: 1 rem;

  See https://css-tricks.com/confused-rem-em/

• I usually use picasa to upload my images, but for some reason any 'auto play' does not appear when I insert the memory card. Any advice?

  When you use picasa to upload my images I usuall just put the memory card in the Tower, AutoPlay appears and then I can view, download, etc... But now the auto dish doesn't appear so that I can tdoen load one of my images from picasa. Can someone help me with this? Thank you

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Troubleshoot AutoPlay:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Change AutoPlay settings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  For more information, see the following Microsoft article.

  AutoPlay: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Hope the information is useful.

• Volume/brightness does not appear when you press the volume button on laptop keyboard

  Recently, when I went to change my volume, the small bar has not appeared on my screen, showing how much I was going to the top. Brightness bar did not show either and it's really annoying because I never know how it is until music strikes out. Any suggestions on how to fix it? I'm totally lost.

  Hello

  I apologize for the delay in responding. It seems that the user profile that you are using has gone corrupt. Try to create a new user profile and check if you have the same problems here as well.

  1. open user accounts by clicking on the button start the picture of the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.

  2. click on manage another account. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  To fix the corrupted profile follow the steps mentioned in the article below.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try using the tool (SFC.exe) System File Checker to check and repair corrupt system files.  To do this, follow these steps:
  How to run scan SFC

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all of the necessary files any replacement SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11 after the scan finished, close the command prompt window reboot the computer and check.

  For more information, see the link below.

  http://support.Microsoft.com/kb/936212

  Let us know if this helps

  Concerning
  Anthony.

• The keyboard on the Windows Media Center screen does not appear when I hit the enter keyboard key!

  I searched through the internet trying to find a solution to this annoying problem: after change to enter the registry and the application of the value entered for showOskOnKeyboardEnter under MCE. PerUserSettings, I always have problems serious on-screen keyboard to appear by using the key "Enter" on the keyboard.  I managed only a couple of times to get the OSK to appear among the dozens of attempts, however, I am unable to recreate the actions - is absolutely not stable.  The only area that reacts to the 'Enter' key is looking for music.  All the fields in the section of Netflix and movies search fields are unresponsive.  Not even works tap triple function.  The only compatible and possible way to have the OSK appear is to double click on the field - that does not work given that the goal is to have an IR remote with the Media Center application interface.  The button 'OK' on the remote control is mapped to the Enter key (except if WMC has a key code value for the 'OK' button).  Help, please!

  I had this problem and it was very frustrating.  The posted solution did not work for me initially.  What I've discovered, is that you have closed Media center before editing the registry.  If you change it while it is open it does not pick up the change and then save settings (i.e. with showOskOnKeyboardEnter = 0) when you close.

  Then...
  1 close Media Center.
  2. follow the steps of the posted solution: http://mymce.wordpress.com/2011/04/20/on-screen-keyboard-in-windows-media-center-doesn ' t - appear /
  3. Open Media Center.
  Should work now.

• Selection of the type (reverse type) does not appear when you select type

  I have AI CS5 on OS X 10.6.4. I just created an illustration. The problem is that when I try to type in this illustration, the text does not invert to indicate what was selected. The selection work; If I drag on the text, I would like to change, and then type the replacement text, old_text is replaced as expected. But it's as if we were working blindly.

  This is a weird problem and happens only in this particular document. If I copy the content to another document, it works very well there. It doesn't matter if I change the police. The problem occurs constantly in the present a document even if I open the document on another Mac, so do not appear to be specific to the computer.

  I found a solution by copying everything into a new document. However, I am curious to know why this is happening. I was wondering if anyone else had never seen this behavior.

  Show/hide the edges (selected in the view menu or via the Hotkey Cmd / Ctrl + H) is a per document setting. That would explain what you have seen.

  To "fix" your problem document, open, switch to Show Edges, then record under using the same or a different file name. (If you just Save without making further changes to the document, it will not take.)

• Symbol does not appear when I use the hotkeys on Satellite L25

  Hello
  I have a Satellite L25. I have a little problem. Before when I used a few hotkeys (such as Fn + Esc) there was a sign on the screen (for example, that there was a cross sign of the sound or it was a volume). Now these signs do not appear, but access keys still work.
  Is that everyone knows what it takes to make such signs appear?
  Thank you very much

  Hello

  Not easy to say why it is not.
  Maybe there is something wrong in the registry, but in my opinion this isn't a serious problem.
  All functions work correctly and in my opinion, you should not be angry about this.
  But if you want, you can refresh the driver. Maybe it helps.

  This unit was designed for the American market. In this case, you should check the site Web of Toshiba us for the necessary driver.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

• Apple Mail window does not appear when I click the icon in the Dock

  When you use Apple Mail, if I reduce the window, she collapses in the Mail dock icon.  When I single click on the Mail dock icon, nothing happens. In Safari and Photo, reopen their windows.  After clicking on the dock icon, Mail is the application to the front, so I can't click on window > Inbox to reopen the window.

  I do not use the Mission control, if it is not as if the window on another virtual desktop.  Is this a bug in the mail?

  MacBook Pro (15-inch, mid-2012)

  El Capitan 10.11.2

  Thank you!

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest by putting in place one of your e-mail accounts. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• Pop - up screen to record images does not appear when you connect the camera

  Original title: when I plug in my camera to download photos I don't have a pop up screen to ask me some questions were to save you more pictures. I want the pop up screen to come back.
  Guest USB? Download the pictures?

  Hello

  1. Are you referring to the AutoPlay window that appears when you connect a device to the computer?

  What is the number and the model of the camera?

  In case you are referring to the Auto play option then try the troubleshooting steps provided in the link below to fix the problem.

  Troubleshoot AutoPlay

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

• When I search, the Virgin appears. I tried to delete it, but it does not appear as an add-on and I can't activate Google. What can I do to remove the Virgin, please?

  On the homescreen so I put in, say, 'flowers' research appears Virgin! I still use it! I followed the instructions on your site to help... Tools - modules. Google, Twitter, etc are grayed out. Virgin is not here, so I can't remoove it. What should I do to get rid of it, please? (I get my broadband on Virgin, but have never used their search engine on my PC). Help, please!

  Hello

  I assume you are using FFX on Android. You can uninstall and reinstall the application?

  I hope this helps!

  Curtis

• new tab does not appear when you press the button "open"

  A few days ago I suddenly can not open a new tab when you press the button open tab , press file-> open the tab, or Open the tab button next to a tab...

  Uninstall the toolbar Ask and it should work again. There is a compatibility issue with the Ask and Firefox toolbar that prevents the opening of new tabs.

  There are a few places to check for the Ask toolbar:

  • Check the control panel Windows for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
  • Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

• Print screen does not appear when I press the print screen key.

  Original title: screen printing

  When I push the print screen button nothing happens, when I go to my doc and change the block is not highlighted

  On Tuesday, February 7, 2012 13:57:37 + 0000, cherylon wrote:

  When I push the print screen button nothing happens, when I go to my doc and change the block is not highlighted

  In the days of DOS, the print screen button to print the screen. But
  in all versions of Windows, it works differently and the name of
  the key is now an anachronism. The key is not to print the screen.
  PrtScrn captures the entire screen and Alt-PrtScrn captures activate
  window.

  Either a capture of the image in the Windows Clipboard. Once it is in
  the Clipboard, you can paste (Ctrl + V) into any application that
  supports graphics (Windows Paint, other graphics software, even your)
  favorite text processing). You can change or add to the image you
  like, then print it out.

  This ability to manipulate the image in a program before printing
  is an improvement on the original method of printing the whole back.
  But if you like that old return facility, there are several
  freeware/shareware programs from third parties which can do, such as
  PrintKey2000 to
  http://www.Sharewarejunkies.com/00zwd2/printkey2000.htm

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup