Burned DVD using Windows DVD Maker times only once on my Blu - ray player

Similar Questions

• HP G62 DVD - RW w / LightScribe upgrade to a Blu - Ray player

  Is it possible to update my current DVD - RW with LightScribe to a Blu - Ray Disc with LightScribe drive?  What do I need?  Any help would be appreciated!

  Hello:

  Here is the link to the service manual for your laptop:

  http://bizsupport1.Austin.HP.com/BC/docs/support/SupportManual/c02542455/c02542455.PDF

  Please see Chapter 3, page 3-8 for the available Blu - Ray discs with reference corresponding HP numbers.

  The player you get depends on what color is your laptop.

  Paul

• I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista...

  I'm having a problem trying to burn a DVD using Windows Movie Maker on Windows Vista. I was able to burn the WMV to a DVD file but I'm not able to watch on my DVD player.  It plays ok on my computer.  How can I burn a file to a DVD and be able to continue to watch on my DVD player?

  If you're running Vista Home Premium or Ultimate
  You can try using Windows DVD Maker.

  Windows Vista - disk to burn a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - demo: disk make a DVD-video

  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-make-a-DVD-video-disc

  If you don't have a DVD Maker, you will need DVD
  Creation software. The following freeware peuvent
  be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.videohelp.com/tools/DVD_Flick
  (the download is: "dvdflick_setup_1.3.0.7.exe")
  (Mirror download (direct link) is the fastest.

  Save the file to your desktop or a folder on your
  hard drive and install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  AVI to DVD with DVD Flick Guide
  http://www.Digital-Digest.com/articles/AVI_to_DVD_using_DVD_Flick_page1.html

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

• Film shot using Windows Movie Maker in part cut off

  How is it when I discover the movie I burned onto a DVD using Windows Movie Maker, shows that half of the video? The other half of the screen/video is cut off, but during the editing process and preview, it shows all of the table. What I am doing wrong?

  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following links should help explain how to record in DV - AVI)

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - profiles Publishing / qualities
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

   
  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Desktop HP ENVY Phoenix 810qe: Blu - ray player and SuperMulti DVD burner

  I am interested in the HP Store and want to buy HP Envy 810qe desktop. It has a 'Blu - ray player and SuperMulti DVD burner." Can I burn data and media projects of discs blu - ray recordable with this burner? I have two different answers when I talk with the Sales Department of online chat.

  If the description says "drive Blu - ray and DVD SuperMulti burner."  Then it can only burn to DVD or CD.  In the description in the "customize and buy" button is says - play music and movies, backup files and burn your own CD and DVD.

  There is no possibility to opt for this particular model, unfortunately.

• Using Windows Movie Maker on the error message XP__ not indexed _ bad quality

  I use Windows Movie Maker XP (version 2.1?).  I've converted and imported a lot of videos.  I have a group of short videos recorded the same day.  I (with free STROKE) converted to AVI and they play with no audio and several play accelerated.  I've then diverted to ASF and some of them imported correctly.  Most of them gave me an error message that they were not indexed.  I downloaded several things to remedy this from online forums: I uninstalled K-Lite pack codec, Expression Encoder 4, WinDVR AVI, DivFix, lame and a number of things.  That's a family movie, I spent a lot of time on it.  If anyone can help with my old hardware and software configuration at this point I'd appreciate it.  The original film seems to be of much better quality than what I am able to import.  Thank you!

  The most reliable video format for Movie Maker is. WMV.

  No guarantee... but the following freeware converter
  may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  You will need to unzip the file... or you could just drag
  the Setup.exe from the file out of the folder and drop it on your
  desktop and install from there.

  Once installed... Open Sothink and go to... Add the files button...
  Find and select the clips you want to convert.

  Next... in the encoding settings... Choose... Video credits.
  WMV - Windows Media Video (*.wmv).

  Choose an output folder and on the left, click on the button convert.

  You can experiment with other settings later but
  This should help you get started.

  Good luck...

• I can't publish a file using Windows Movie Maker despite after every single step and instruction

  I use Windows Movie Maker c. 5.1. (Build 2600) on a computer running Windows XP Professional 2002, SP 3. I try to publish a movie file which is a revised version of a WMV file. In other words, the original file is a file WMV is 534 MB.  I am editing the film by dividing and by deleting scenes, adding transitions and titles.  I am able to save the file (for a WMM file) but impossible to publish the movie.  I checked that (i) the files are in the correct location, (ii) the file does not exceed the limit of 4 GB, (iii) the destination does not exist (I tried everything from my desktop to video files).  I tried every possible resolution and the file type.

  I would change the software of movie at this point if I had not invested so much energy and time behind this project.  Help, please!

  Hello not happy with WMM,

  You get an error message when you try to publish?  If so, what is it?

  One thing you might try is breaking your video into 3 or 4 smaller sections and see if they work / will be published separately.

  See you soon

• When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not.

  When I use Windows Maovie Maker, the program keeps freezing upwards and says that it does not. I close and try again, but get the same question. in the past, I used this program very well without any problem. Now I do one or two things in the tyring program to create a video and it freezes. Any suggestions how I can fix this problem?

  The three main causes of problems of Movie Maker are:

  (1) incompatible or damaged source files.
  (Photos / videos / Audio clips)

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Audio - wav, wma, wmv

  (2) problems with video filters

  Open Movie Maker and go... Tools / Options /.
  Compatibility tab and disable all filters / OK.

  If this does not help, try going back to the same
  location and on the left, click on the 'all the default settings.
  button. / OK.

  (3) too large or complex project

  Create small projects.
  Add less Transitions, effects, etc...

• All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  All using windows movie maker, I added audio, but I can't hear the music while playing the video... Why is this?

  Hello

  1. What is the format of the video file that you use in Movie Maker?

  2. do you receive error messages when you try to play the video?

  Some audio and video file formats are not supported in Windows Movie Maker and cannot be imported. However, if you have a video or audio file that is not taken care of, you can use a non-Microsoft video editing software to convert the file into a format supported by Windows Movie Maker, and then import the video file or an audio resulting in Windows Movie Maker.

  You can use your favorite search engine and download third-party video editing software to convert the file.

  Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  For more information, you can also consult the following articles:

  Problems with importing files into Windows Movie Maker

  Import video, photos and audio on Windows Movie Maker

  Hope this information is useful.

• I'm unable to use windows movie maker to edit my clips.

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  I want to use windows movie maker to quicktime footage.
  How can I change the clips to make them open with windows movie maker?
  How can I change a whole?

  ==============================
  The following freeware program to convert
  your .mov to .wmv format files.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your clips on the main screen .mov...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  I use Windows Movie Maker but when I publish the movie I have a green horizontal band to halfway across the screen. Please can someone advise?

  =========================================
  The info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...
  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• It is allowed to use Windows Movie Maker to create and edit videos Youtube Monetizable (commercial use)? »

  (By Microsoft), it is allowed to use Windows Movie Maker to create and edit (titles, effects) of Youtube videos that will be Monetizable?

  Yes, but the videos should be your property made/saved by you and not fact/record of others.

• Unable to capture HD video using Windows Movie Maker or Cyberlink Power Director of Canon HV30 on I.Link (firewire)

  Canon HV30 HDV Capture Issues Firewire in Win 7 (64-bit)

  There seems to be a problem with Windows 7 (64 bit) in the HD video capture from a Canon HV30 on I.Link (firewire). The camera is detectable, but I am unable to capture videos HD using Windows Movie Maker or Cyberlink Power Director. All the drivers and the software updated.

  Same camera, same editing works very well under Win XP.

  Someone at - he a workarouonds?

  (1) the question arose on January 20, 2010, when I got my new computer (Dell XPS 9000) WIN 7 (64-bit) and I first tried to capture video, I had already shot with the Canon Vixia HV - 30.

  (2) the updated capture in place according to the manual of Canon, using the firewire interface to download video using Power Director 7 or Windows Movie Maker.

  -Power Director 7 is able to detect and control the camera, however once the capture begins an error message appears saying that the i-link on the camera mode is not compatible with the Strip to be captured. Verified media is HDV (60i) and playback camera settings are all correct.

  -Windows Moview Maker is able to detect and control the camera, however, no video is captured and no error message appears.

  (3) will try to reinstall the drivers for the HV30.

  Kind regards

  Blarney

• I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  I use Windows Movie Maker on Windows 8 computer and when I put in a video and you try to look at it, it appears black with no audio signal. How can I fix it?

  Hi Michael,

  Thanks for posting your query on the Microsoft Community.

  Because the problem is specific to a particular video file or all the files?

   

  Follow the methods and check them off below if it helps:

  Method 1: Reset the Windows movie maker for default settings and check.
  To restore the default settings

  1. click on Toolsand then click Options.
  2. click on the tab that you want to reset the settings and then click on the default settings.

  Method 2: I suggest you run the audio Troubleshooter and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab3&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 3: repair of Director and check

  Follow the link as reference below:

  https://support.Microsoft.com/en-us/mats/video_freezes_or_crashes

  Hope this information is useful.

  Thank you.