bus FireWire disappeared

Similar Questions

• Unable to connect via IEEE 1394 card reader in Satellite A100-988

  I tried to connect an i Link on my A100 port Compact Flash drive. I'm using a Firewire Extreme of Sandisk drive and the connection with a 4 pin cable 9-pin.

  Device Manager indicates that the TEXAS INSTRUMENT IEE 1394 CONTROLLER of BUS firewire is enabled and working properly. Unfortunately, my computer can not see the map. Any ideas?

  Hey Buddy,

  already enabled smart card service in the "services"? You must enable this service if it is not already done.

  You can reach services' by clicking on START-> Control Panel-> administration-> Services-> smart card tools

  Then go into this service, start him and to do as that kind of "autostart".
  I hope my tip helps you with your problem. :)

  Welcome them

• Compatible with cards/eSATA drives?

  Hi all, so I guess the short version is "anyone using this with a drive eSATA to eSATA PCIe cards?

  Chatty: I have a brand new video player, but given that my audio interface hate other things on the bus firewire, im thinking just to get an eSATA card (this 1 TB external hard drive has several connections).

  If im wondering if Adobe Premiere Pro has approved the feature of using the protocols of eSATA and if so,.

  can I expect good operation when running the sessions off the drive and also when capturing through first, live in the reader?

  Thank you for your stories and advice people!

  E-Sata controller cards are more for multiplexing support than anything else, unless you have not only on board E_Sata ports. If you have a Multibay E-sata unit then most likely that will not E-sata controller card for several controllers on board you will not process multiplexing. Also the more expensive E-Sata such as the Sonnet maps will give you better performance with multi-baies units but not with mere readers.

  Eric

  ADK

• FireWire Camera disappeared to MAX when you select the driver NOR-IMAQdx

  Hi, as the title suggests, I'm having a problem getting my camera firewire (a PixeLINK PL-A742) appears in MAX so I can use it in my application. First of all, a bit of history.

  It was all works fine on an old computer (Windows XP SP3, LabVIEW 8.6.1, NOR-IMAQdx 3.2).

  We just received two new computers. They have Windows 7 Professional 64 - bit installed on them, then we are stuck using that (I was going to install labview in XP Mode, but there is no support for firewire, which no longer works). After finally getting installed labview (to run the setup.exe from Distributions\LabVIEW-ENG\LabVIEW861\, rather than make the autorun) we cannot get this camera to work. It works very well with the PixeLINK pilot (and Capture OEM program that accompanies it).

  So here is what I tried, and what happens when I do.

  (1) install cost of LabVIEW (including IMAQdx 3.2) and PixeLINK drivers.

  (2) at this stage, the camera works very well in the PixeLINK application

  (3) start MAX. It detects the camera and shows under devices NOR-IMAQdx. When you click on the camera, it informs me that the selected device is not currently associated with legacy OR-IMAQ driver IEEE or the driver OR-IMAQdx. This is perfect, it is supposed to do.

  4) click camera > driver > choose NOR-IMAQdx IIDC camera digital

  (5) he then disappears from MAX (no record OR-peripheral IMAQdx more). If I goto windows Device Manager, it comes under National Instruments IMAQ Interfaces as NOR-IMAQdx IIDC camera, says the pilot did get properly, it just does not appear in MAX more...

  (6) at this point, there is nothing I can do to get it back to the MAX (except in Device Manager to switch the driver on the PixeLINK one, then he pops up and we return to step 3)

  So, any ideas? This could be a problem with firewire interface and not the camera? I use the FireWire on my computer. It presents itself as Texas Instruments 1394 OHCI compatible host controller in Device Manager.

  Here are a few screenshots to help illustrate my problems.

  It is the initial configuration using the PixeLINK driver.

  

  It's MAX with the PixeLINK driver

  

  As soon as I click on the NOR-IMAQdx IIDC camera, it disappears

  

  And here's what it looks like in Device Manager after you have selected the NOR-IMAQdx driver

  

  Anyone have any ideas? I'm open to anything. At this point, I'm completely at a loss to know what to do.

  Thanks in advance,

  Devin

  Mechanical engineering intern

  University of Victoria

  Well, you can just ignore this message now. I solved my problem. I installed Vision Acquisition software 2009 and it seems to have solved my problem.

• Firewire connection is unstable?

  Screaming people, having a bit of a technical heehaw with my iMac and my M-Audio ProjectMix i/o and the thought that I could ask you all for more help.

  The M - Audio ProjectMix i/o is an a firewire audio interface and control surface, it is really good and has been working perfectly fine for some time, however, for a reason which I cannot yet understand it unplug spontaneously my iMac shortly after the start. I usually have enough time to open Ableton Live and define the ProjectMix as audio device, where I can get a minute or two to operate, then audio becomes clicks/POPs and then the iMac restarts. In some cases, the iMac restarts, but the ProjectMix disappears from the audio devices available in the preferences of Ableton (it disappears also the about this Mac > system report > Firewire) and is unusable for this purpose.

  Now, I discovered that the M-Audio drivers are not compatible with Yosemite and El Capitan, so I thought for sure that was the problem, then I followed a tutorial on how to make it work in El Capitan, but it's the same thing and my question has not reflect issues, other owners of ProjectMix had with El Capitan and they've all got to work using tutorial. However, I thought that the best thing to do would be to take the iMac to a State that was compatible with the M-Audio for the ProjectMix drivers, so I went back to the Mavericks, installed the drivers, open to Ableton Live, and it's the same thing.

  During this time I also tried using different firewire, resettlement of the different versions of Mac OS x cables, reset the SMC, reset PRAM, you know, all the usuals.

  I thought that if she is not the operating system and not on the firewire cable, one firewire port, so I bought a thunderbolt Apple firewire adapter to work around the Firewire port. I was hopeful when he connected, I even smiled, then, click on click on pop pop, the iMac restarted.

  So, here I am confuddled. I have not much to conclude except that it takes the ProjectMix himself, having said that, if it was the ProjectMix I don't expect the iMac to restart when it disconnects, this seems a bit over the top, unless something else happens that I don't take into account.

  I don't think that any of you all have any suggestions or advice?

  I have included my current characteristics and the latest report of crash after reboot (using the crush on firewire adapter). Y ' All thanks a lot for any help you can provide.

  Specifications:

  2011 27 "iMac running OS X El Capitan 10.11.3 / OS X Mavericks

  Ableton Live 9.6

  M-audio ProjectMix i/o (Firmware Version 10.19.05.A)

  Panic report *.

  panic (cpu 1 0xffffff8022dd255a appellant): Kernel trap at 0xffffff80232b5d69, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0 X 0000000000000030, CR3: 0X000000015C210040 CR4: 0X00000000000626E0

  RAX: 0XFFFFFF7FA40F2F50, RBX: 0 X 0000000000000000, RECOMMISSIONING: 0 X 0000000000000001, RDX: 0XFFFFFF8031852000

  RER: 0XFFFFFF80BDA23CE0, RBP: 0XFFFFFF80BDA23CF0, IHR: 0XFFFFFF8031852000, RDI: 0 X 0000000000000000

  R8: 0XFFFFFF8031322000, R9: 0XFFFFFF80343CDCB0, R10: 0XFFFFFF7FA471D67C R11: 0XFFFFFF802323E9E0

  A12: 0 X 0000000000000020, R13: 0 X 0000000000000020, R14: 0X00000000000003C8 R15: 0XFFFFFF80BDC99000

  RFL: 0 X 0000000000010282, RIP: 0XFFFFFF80232B5D69, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0 x 0000000000000030, error code: 0 x 0000000000000000, CPU error: 0 x 1, PL: 0

  Backtrace (CPU 1), frame: return address

  0xffffff80bda23970: 0xffffff8022cdf792

  0xffffff80bda239f0: 0xffffff8022dd255a

  0xffffff80bda23bd0: 0xffffff8022df0233

  0xffffff80bda23bf0: 0xffffff80232b5d69

  0xffffff80bda23cf0: 0xffffff7fa40e30ea

  0xffffff80bda23d10: 0xffffff7fa40dba40

  0xffffff80bda23d20: 0xffffff7fa5f55a24

  0xffffff80bda23d40: 0xffffff7fa5f55abc

  0xffffff80bda23d70: 0xffffff7fa5f6938f

  0xffffff80bda23dc0: 0xffffff7fa4721f61

  0xffffff80bda23e20: 0xffffff7fa471dc2b

  0xffffff80bda23e90: 0xffffff7fa471d74c

  0xffffff80bda23ed0: 0xffffff80232e439f

  0xffffff80bda23f10: 0xffffff8022dbcd2a

  0xffffff80bda23fb0: 0xffffff8022df0a56

  Extensions of core in backtrace:

  com.apple.driver.AppleFWOHCI (5.5.2) [3F6BEAD1-4FB9-3F71-895D-3DB4FF3EA3D7] @0xfff fff7fa40d2000-> 0xffffff7fa40f7fff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [F398CE94-0FBD-3E8E-A7AB-55F7F05A81ED] @ 7fa352c000 0xffffff

  dependency: com.apple.iokit.IOFireWireFamily (4.5.8) [433B63BC-082C-3AA5-B813-8FEBA9FD77D9] @0 xffffff7fa390e000

  com.apple.iokit.IOAudioFamily (204.3) [79080C52-FC35-31BA-8C06-087B308D33D1] @ ffff7fa4712000-> 0xffffff7fa4742fff 0xff

  dependency: com.apple.vecLib.kext (1.2.0) [E62681B7-BE2F-3F89-8065-91C5C2876EBA] @0xffffff7fa4 696000

  com.m - audio .driver .FireWire (1.10.5) [00000000-0000-0000-0000-000000000000] @0xfff fff7fa5f4f000-> 0xffffff7fa5f9cfff

  dependency: ffff7fa4712000 @ com.apple.iokit.IOAudioFamily (204.3) 0xff [79080C52-FC35-31BA-8C06-087B308D33D1]

  dependency: com.apple.iokit.IOFireWireFamily (4.5.8) [433B63BC-082C-3AA5-B813-8FEBA9FD77D9] @0 xffffff7fa390e000

  dependency: ffff7fa410e000 @ com.apple.iokit.IOFireWireAVC (4.2.3) 0xff [A4F0489E-27BA-3743-8F16-D35696AD07DA]

  The process corresponding to the current thread BSD name: coreaudiod

  Boot args: kext-dev-mode = 1

  Mac OS version: 15 d 21

  Kernel version:

  15.3.0 Darwin kernel version: Thu Dec 10 18:40:58 PST 2015; root:XNU-3248.30.4~1/RELEASE_X86_64

  Kernel UUID: DECC9F02-27D7-31F0-9599-A9EF2873902C

  Slide kernel: 0x0000000022a00000

  Text of core base: 0xffffff8022c00000

  Text __HIB base: 0xffffff8022b00000

  Name of system model: iMac12, 2 (Mac-942B59F58194171B)

  Availability of the system in nanoseconds: 312826035385

  last load kext to 271784124102: com.apple.filesystems.msdosfs 1.10 (addr 0xffffff7fa5f9d000 size 69632)

  Finally unloaded kext to 195460302621: com.apple.driver.usb.AppleUSBUHCI 1.0.1 (addr 0xffffff7fa3cce000 size 126976)

  kexts responsible:

  com.m - audio .driver .firewire 1.10.5

  com Apple.filesystems.msdosfs 1.10

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AGPM 110.20.22

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 272.51.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.kext.AMDFramebuffer 1.4.0

  com.apple.driver.AppleHDA 272.51.3

  com.apple.iokit.IOBluetoothSerialManager 4.4.3f4

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  com.apple.AMDRadeonX3000 1.4.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.driver.AppleBacklight 170.8.8

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.kext.AMD6000Controller 1.4.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleIRController 327,5

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.1.12

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.AppleFWOHCI 5.5.2

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.iokit.IOFireWireAVC 4.2.3

  com Apple.kext.Triggers 1.0

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.AppleHIDKeyboard 181

  com.apple.driver.IOBluetoothHIDDriver 4.4.3f4

  com.apple.driver.AppleMultitouchDriver 304.10

  com.apple.driver.AppleHIDTransport 5

  com.apple.iokit.IOSurface 108.0.1

  com.apple.driver.DspFuncLib 272.51.3

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOAcceleratorFamily2 205,1

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.3f4

  com.apple.iokit.IOBluetoothFamily 4.4.3f4

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.kext.AMDSupport 1.4.0

  com.apple.AppleGraphicsDeviceControl 3.12.6

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.driver.AppleHDAController 272.51.3

  com.apple.iokit.IOHDAFamily 272.51.3

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.driver.AppleUSBAudio 302.15

  com.apple.iokit.IOAudioFamily 204.3

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.usb.IOUSBHostHIDDevice 1.0.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIUpAdapter 2.0.2

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 5.1.0

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  4.5.8 com.apple.iokit.IOFireWireFamily

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417.2

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac12, 2, IM121.0047.B23 of BootROM, 4 processors, Intel Core i5, 2.7 GHz, 4 GB, MSC 1.72f2

  Graphics card: AMD Radeon HD 6770 M, AMD Radeon HD 6770 M, PCIe, 512 MB

  Memory module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620

  Memory module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x02FE, 0x45424A3231554538424655302D444A2D4620

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.3f4 16616, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  PCI card: pci11c1, 5901, IEEE 1394 Open HCI, Thunderbolt@195,0,0

  Serial ATA Device: ST31000528AS, 1 TB

  Serial ATA Device: HL-DT-STDVDRW GA32N

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: iLok

  USB device: USB 2.0 Hub

  USB device: USB HID

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB device: USB 2.0 Hub

  USB device: Arturia MINILAB

  USB Device: IR receiver

  USB Device: Card reader

  Bus crush: iMac, Apple Inc., 25.1

  Device of lightning: lightning to FireWire adapter, Apple Inc., 3, 5,6

  This seems to be the cause of your 1.10.5 panic com.m - audio .driver .firewire

• question about firewire ieee 1394 via chip.

  I have a hp pavilion a705w, missing a chip called "via vt6307" I see online is for ieee 1394, if I use not any device with a firewire port to this computer if they have problems or be less safe, or that make a difference, the chip has disappeared from the motherboard.

  Hi vilig,

  It is a design of single chip with full "plug and play" capabilities for integration in PC systems and electronic public, equipped with an interface HCI open and logical functions initialization and bus arbitration.

  Flexibility
  Has 2 ports supporting transmission rates up to 400 Mbps, allowing the use of multiple devices broadband simultaneously.

  If the chip is placed on the motherboard, it would be preferable that you contact the manufacturer for help on this issue.

• Number of stars in the app music in iOS 10 has disappeared?

  Hello

  Star ratings of songs in music app in my iPhone 6 s 10 iOS disappeared :-(

  My library of music with thousands songs sorted in rated playlists is useless now (and my iPhone too), :-(

  I have red tips on the side for use with Siri, but you can't do sitting on the bus or train...

  Someone who knows why apple removed the rating feature in the music app, and if they put it back?

  Best Regeards,

  / Zoro64

  Post edited by: Zoro64

  See this thread for this problem: No. 5 Star Song notation in iOS 10

• After years of stability, FW800 drives now randomly disappear

  I have a Mac Mini to / 2009 with 6 2 TB G-drives attached via FireWire 800 and configured as RAID 6 to mirrored volume. My system has been configured in this way for about 4 years.

  About three months ago I started having problems with the volume randomly endangered (incorrect disc is ejected). It happens when the drives are inactive and when there is an intense activity of IO - makes no difference. When this problem started, the volume has been configured with the AppleRAID and disks are connected in Garland, one to the other, on the back of my Mac Mini. I have since turned off all power management features, replaced cables, left for SoftRAID(4) AppleRAID, reset the Mac Mini, reinstalled OS X, makes a partial disk swap off Spotlight, put a fan on the push to reduce their usage time and installed a powered hub of Nitro AV to remove the Garland. No substantive changes - only they don't give up much, but it happens still regularly (every 24-48 hours).

  Interestingly, not all 6 discs disappear. Sometimes when it's just one, or maybe two or three or even five of the six. I can't decipher a pattern. I find it odd that only some readers drop out and those who is different every time. Sometimes reboot will bring them back, but not always. The only sure method to get the reader to put it back online is tension on the drive.

  The one constant I've observed more recently is there is always this error FireWire a few seconds to a minute before readers abandon "Lucent ID 5901 integrated: handleUnrecoverableErrorInt.» I did some research and found not much - more info on audio problems than drives.

  Before moved me to SoftRAID(4), who owns a proprietary driver limit myself to a single PC, I moved the disk on another machine of circa-2009 (a MBP). The problem was always present, but not as bad. Maybe an obscure issue with interaction between El Capitan and my older hardware?

  This problem has led to problems of significant data corruption and too many hours of troubleshooting of headaches and so I'm done with FW and move to a Synology NAS. I thought I would check here if to see if there is new way of thinking about this old topic or something obvious that I may have missed my troubleshooting.

  Thank you.

  Tried resetting the pram?

• HP 15-r007tx = pci device sm bus controller drivers for devices and missing

  Well Hello hp. I bought a 15-r007tx hp Tower a week back. My os is windows 8.1. It's a duplicate operating system.

  in fact, I was downloading my drivers of hp's official website and I noticed that the sm bus controller and drivers pci for my knees disappeared. I searched on the Web site by changing the region, but it didn't help out me.

  can you please give me the link to download my sm bus controller and the drivers for pci devices... Please...

  Hello:

  You need these drivers for devices.

  SMBus:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7089866 & sw_lang =

  PCI:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-134096-1 & CC = US & DLC = in & LC = on & os = 4158 & Product = 7089866 & sw_lang =

• HP Elitebook p 8460 - Bus controller series universal (USB)

  Hello

  All my drivers have been updated except one in other devices:

  Universal Serial Bus (USB) controller - I use a HP Elitebook 8460p

  If someone could provide a driver for it to disappear.

  Thanks in advance.

  Kind regards

  Antony

  Hi, Antony:

  You probably need to install the 3.0 controller driver usb.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5056943 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108572_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

  Best regards

  Paul

• Important: chipset in Qosmio X 300 - 15u laptop Firewire

  Hi, sorry for my bad English,

  I am interested to buy TC ELECTRONIC FIREWARE KONNEKT 6 for my laptop * Qosmio X 300 - 15u * for audio production in my home recording studio.

  I would like to know if anyone can tell me who is the manufacturer of the chipset firewire onboard? Texas Instruments (TI), Ricoh, other?

  before you buy the sound card, I want to be sure that the chipset is not Ricoh, what chipset seems to have a lot of latency issues

  Any help is appreciated.
  Best regards
  Valerio

  Have you checked in the properties of Bus IEEE 1394 host controller device manager?
  When you check the provider code you will see the VEN_197B value and according to http://www.pcidatabase.com it's JMicron Technology Corp.

  Check it out.

• Satellite A100 doesn't detect camcorder connected to the firewire port

  Recently, I upgraded my Satellite A100 for XP Pro SP3.
  In order to capture the video from my camcorder Canon I attached the camera to the 1394 port, but the computer does not detect my camera.

  I have changed the cable, restored the software factory default but the presist still problem.
  The camera works fine with another computer, which means that there is some setting or a hardware problem with 1394 port.

  Help, please.

  Hello

  Did you check device manager if the IEEE 1394 (firewire port States) bus host controller has been recognized correctly?
  Are there any yellow exclamation marks?

  Try this workaround:
  -in Device Manager, remove the IEEE 1394 bus host controller
  -restart the laptop
  -Wait that windows reinstalled this controller again
  -Connect the camera and turn it on.

  See you soon

• Equium M50 - how to connect firewire devices?

  Equium M50 Intel Celeron M 360 1.4 GHz processor

  Referring to the above, I am able to download photos from my camera to my hard drive, but to download videos that I need to connect a firewire camcorder to the computer. There is no connector on the computer to take in this regard.

  Is there a solution to this?

  Hello

  I put t know if your camera has a firewire port, but if yes it is listed in the Device Manager as IEEE 1394 bus host controller.

  If your device doesn't have a firewire port, you can buy the PCMCIA card with firewire port. By the way: M50 has 4 USB ports (two in the back near LAN port and two near the DVD drive on the right). On models with firewire ports it is definitively placed near S-video output port as Michael described.

  Good bye

• Cable IEEE 1394 to 800 FireWire MBP mid 2012

  Hello

  Currently, I discovered an old camcorder (Samsung VP-D371) that uses a DV IEEE 1394 cable entry. I have an old cable, but does not support the USB or firewire 800 appropriate.

  My question is: the Macbook Pro for mid-2012 capture the videos saved in the camcorder? --> If YES: should which cable I buy?

  -A DV to USB cable

  -A DV FireWire 800 cable

  -A DV cable for love at first sight...?

  Plus, do you know of any box or cable adapter for Mini DVI VHS transfer to the computer?

  Thank you

  Sincerelly,

  FireWire converts freely back and forth between its various forms, simply by using the correct conversion cable (which differs from the others only by the provided number of pins and the link shape.

  Most digital camcorders use the variety 4 pin, fireWire-400 without the supplied power cords.

  Older Macs use the Firewire-400 variety with power, which converts directly to your camera with a cable from 6 to 4

  New Macs using FireWire 800 varieties which has additional pins for drivers to push - pull on the data lines, so it has the connector 9 pins and can instantly transform 400 with a 9-6 adapter cable, or your camera with a cable adapter 9 to 4.

  Some separate adapters are also available, but these should only be used in an installation permeant, because (based on anecdotal evidence) "they grow legs and disappear.

• How to buy and adapt firewire card.

  Take your advice, I install a firewire card on my new HP p6598uk. Don't think I could do it myself, but watching the videos on Utube it does not look too difficult. Going to order a card online and Maplin have one on their site Web - Bus IEEE 1394 for the Pci interface card, the card should I buy (Tryng to transfer data to PC mini DV camcorder). Close to there. Thank you.

  Hello

  The map that you suggest is correct and should be exactly what you are looking for.  An example is on Page 92 on the link below - Nr TJ65V (it may even be that you order!).

  Maplin catalogue

  Best wishes

  DP - K